NDLI: Temporary Bonding and DeBonding Enabling TSV Formation and 3D Integration for Ultra-thin Wafers

Content Provider	IEEE Xplore Digital Library
Author	Pargfrieder, S. Kettner, P. Privett, M. Ting, J.
Copyright Year	2008
Description	Author affiliation: EV Group, St. Florian, Austria (Pargfrieder, S.; Kettner, P.)
Abstract	As the microelectronics industry promotes emerging and future applications, new and improved methods will be necessary to meet the manufacturing challenges associated with new products and processes. Emerging products and applications such as heterogeneous integrated chips (3D, TSV-through silicon via), radio-frequency identification tags, ever denser memory devices along with the advent of new advanced packaging technologies for a variety of products ranging from logic to memory to image sensors (CIS) require increasingly thinner substrates. While thin (<100 mum) silicon wafers exhibit increased flexibility, which in some cases is actually desired, such wafers also exhibit increased instability and fragility. The increased degree of fragility becomes even more pronounced in compound semiconductor wafers because of the mechanical properties of the constituent materials. The lack of mechanical stability and the increased fragility present a major challenge to maintaining high yield levels in volume manufacturing environments. A reliable support and handling solution is needed to overcome the above-mentioned challenges while maintaining yield levels compatible with low-cost, high-yield manufacturing processes. The solution of choice must enable safe, reliable handling of the substrates through back-thinning and backside processing while being compatible with existing (already installed) equipment lines and manufacturing processes. The most promising and most widely investigated handling solution for $UltraThin^{reg}$ wafers is the use of temporary bonding and debonding techniques utilizing a rigid carrier wafer to provide sufficient mechanical support. Once the product wafer is temporarily bonded to the carrier wafer, it is ready for backside processing including back-thinning, through-silicon via formation, etc. The product wafers can either be pre-processed wafers with CMOS devices as well as e.g. substrates with high-topographies like solder-balls. After completion of the backside processing steps, the product wafer can be released from the carrier wafer and proceed to final packaging processes. This paper will discuss and describe the temporary bonding process step technology, including spin/spray coating process to apply the high performance BrewerScience intermediate adhesive and the subsequent bonding step in detail. The EVG850TB (temporary bonding) equipment and the related process modules to cover this process are explained in addition. Furthermore, backside-processes (like e.g. thinning, backside metallization,.etc) which are typically applied after bonding to form e.g. TSV (through silicon via's) and the corresponding process performance are described. Once the original bonded waferstack went successfully through the backside process steps, debonding will be performed. DeBonding, in this case means, that first the thin wafer is getting debonded via thermally activated slide lift-off approach from the carrier wafer, cleaned in a single wafer cleaning chamber in order to remove the remaining adhesive residuals and than transferred to the dedicated output format. Output formats typically are either filmframe carriers, dedicated wafer cassettes, coin stack packing canisters or e.g. single wafer carriers. The carrier wafer is also getting cleaned and can then be reused again immediately for another bond-process. The EVG850DB (debonding bonding) equipment and the related process modules to cover this process are explained in detail. The paper will conclude with a discussion and comparison of silicon and glass carriers used for temporary bonding with respect to process integration and CoO.
Starting Page	1301
Ending Page	1305
File Size	4310681
Page Count	5
File Format	PDF
ISBN	9781424421176
DOI	10.1109/EPTC.2008.4763610
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2008-12-09
Publisher Place	Singapore
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Wafer bonding Through-silicon vias Silicon Manufacturing processes Substrates Packaging Maintenance Microelectronics Manufacturing industries Radio frequency
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in