NDLI: Thermo-mechanical modelling and thermal performance characterisation of a 3D folded flex module

Content Provider	IEEE Xplore Digital Library
Author	Bivragh, M. Kelley, M. Van Sinte Jans, J.-B. Indrajit, P. Slattery, O. Barton, J. O'Mathuna, S.C. O'Flynn, B. Malshe, A.P.
Copyright Year	2006
Description	Author affiliation: Tyndall Nat. Inst., Cork (Bivragh, M.)
Abstract	This paper reports the initial investigation into the thermo-mechanical stress and thermal performance of a folded flexible substrate module. The module consists of flip chip bare die silicon onto a flex and interconnected via conductive adhesive and folding the flex to obtain the final module. From the FEM analysis it was concluded that the stresses in silicon and conductive adhesive are not significant to cause potential reliability problems. The model showed that for 525 and 250 microns thick silicon chip the stresses do not vary notably with change in polyimide or copper thickness but vary significantly below this critical value. This shows that silicon is the dominant material in the stack when the chip thickness is above 100 microns but below this thickness, stress is more dependent on copper and polyimide thickness. Thermal performance characterisation showed that for the current module set-up total power to the module rather then power to the individual chip is an important criterion for the selection of thermal management scheme. Changing the thickness of polyimide and copper has little effect on module temperature. Decreasing the chip thickness increases the thermal density and thereby increases the total temperature for the stack for any given power
File Size	437327
File Format	PDF
ISBN	1424401526
ISSN	05695503
DOI	10.1109/ECTC.2006.1645738
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2006-05-30
Publisher Place	USA
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Thermomechanical processes Thermal stresses Silicon Polyimides Copper Thermal management Conductive adhesives Temperature Flip chip Conducting materials
Content Type	Text
Resource Type	Article
Subject	Electronic, Optical and Magnetic Materials Electrical and Electronic Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

The experimental and theoretical approaches of contraction stress build-up of anisotropic conductive adhesives for flip chip interconnection

Lifetime model for flip-chip on flex using anisotropic conductive adhesive under moisture and temperature loading

Internal stresses evolution of non conductive pastes (NCPs) and underfill materials for flip chip applications

Flip chip attach with thermoplastic electrically conductive adhesive

Integrated Process-Aging Modeling Methodology for Flip Chip on Flex Interconnections With Nonconductive Adhesives

A Fluxless and Low-Temperature Flip Chip Process Based on Insertion Technique

Correlation of thermo-mechanical properties of adhesives with reliability of FC interconnections

Thermo-mechanical characterization of copper filled and polymer filled tsvs considering nonlinear material behaviors

Reliability modeling & test for flip-chip on flex substrates with Ag-filled anisotropic conductive adhesive

Thermo-mechanical modelling and thermal performance characterisation of a 3D folded flex module

Similar Documents

The experimental and theoretical approaches of contraction stress build-up of anisotropic conductive adhesives for flip chip interconnection

Lifetime model for flip-chip on flex using anisotropic conductive adhesive under moisture and temperature loading

Internal stresses evolution of non conductive pastes (NCPs) and underfill materials for flip chip applications

Flip chip attach with thermoplastic electrically conductive adhesive

Integrated Process-Aging Modeling Methodology for Flip Chip on Flex Interconnections With Nonconductive Adhesives

A Fluxless and Low-Temperature Flip Chip Process Based on Insertion Technique

Correlation of thermo-mechanical properties of adhesives with reliability of FC interconnections

Thermo-mechanical characterization of copper filled and polymer filled tsvs considering nonlinear material behaviors

Reliability modeling & test for flip-chip on flex substrates with Ag-filled anisotropic conductive adhesive

Thermo-mechanical modelling and thermal performance characterisation of a 3D folded flex module