NDLI: Magnetic field sensor based on a single mode-multimode-single mode optical fiber structure

Please wait, while we are loading the content...

2015 IEEE SENSORS

Table of contents

Cover page goes here

An enzymatic glucose biofuel cell based on Au nano-electrode array

Cell integrated thin-film multi-junction thermocouple array for in-situ temperature monitoring of solid oxide fuel cells

An implementation of an electronic tongue system based on a multi-sensor potentiometric readout circuit with embedded calibration and temperature compensation

Portable wireless device for hemoglobin level monitoring

Odor assessment of automobile interior components using ion mobility spectrometry

A threshold voltage variation calibration algorithm for an ISFET-based low-cost pH sensor system

Korea Air force standard NDE coupon test of full-field pulse-echo laser ultrasonic propagation imaging system

A haptic-inspired approach of ultrasonic nondestructive damage classification

Remote imaging of local resonance for inspection of honeycomb sandwich composite panels

Investigation on optimal poling condition of PNN-PZT/Epoxy paint sensor and its sensitivity improvement

A vibro-haptic interface development for impact detection on UAV wings

An optical head-pose tracking sensor for pointing devices using IR-LED based markers and a low-cost camera

Measurement of the temperature sensitivity of phase modal birefringence of polarization maintaining optical fibers using a Sagnac interferometer based temperature sensor

Temporal pattern recognition for gait analysis applications using an "intelligent carpet" system

Smart functions for carbon nanotube bolometer

Odor source shape visualization by multispectral fluorescence sensing

High photocurrent and high frequency response of light-addressable potentiometrie sensor with thin Si substrate and surface roughness

Real-time 2D pH images by fast scanning light-addressable Potentiometrie sensor system controlled by LabVIEW program

Determination of safranal concentration in saffron samples by means of VE-Tongue, SPME-GC-MS, UV-Vis Spectrophotometry and multivariate analysis

Gas visualization based on localized surface plasmon resonance of gold nanoparticle films

The intelligent container — What can MEMS do for logistics of food?

Application of water quality index for pollution detection at Luton Hoo Lake

The Internet of Things based medical emergency management using Hadoop ecosystem

Performance improvement of optical fibre oxygen sensor detection scheme incorporating narrow bandpass emission optical filter

Development of a quasi time stretch technology for indoor positioning system based on pulse modulated ultra high frequency radio

Evaluating transparent liquid screen overlay as a haptic conductor: Method of enhancing touchscreen based user interaction by a transparent deformable liquid screen overlay

Versatile air-coupled phased array transducer for sensor applications

Active bioacoustic measurement for human-to-human skin contact area detection

Characterizing conductive yarns for pressure sensors applications

Heat conduction in multi-layer circuit elements

Design of a new differential silicon resonant accelerometer with dual proofmasses using two-stage microlever

Acoustic scene change detection

Experimental verification of a tactile sensor based on ionic polymer-metal composites

Preliminary design of a magnetic position sensor based on a biocybernetic system approach

A planar coil fluxgate magnetometer using multi-core configuration

Soft defects localization by signature magnification with selective windowing

JAMF-based representation for computational lung sound analysis

Reducing magneto-inductive positioning errors in a metal-rich indoor environment

The effect of surface morphology of ZnO nanorods on the sensing response of graphite/ZnO nanorod junctions

Detection of individual CO molecules adsorption with suspended graphene in an electrical field

Thin film transistors gas sensors based on poly(3-hexylthiophene)/Zinc oxide-nanorods composite film for nitrogen dioxide detection

Effects of palladium nanocrystal morphologies on hydrogen sensors based on palladium-graphene hydrid

Acetylene gas sensing properties of silver nanoparticles decorated ZnO morphologies with reduced graphene oxide hybrids

3-D nanostructured tungsten-oxide gas-sensing film via anodizing sputter-deposited Al/W metal layers

Ultrasensitive formaldehyde gas sensors based on a hollow assembly and its 3-dimensional network formation of single-crystalline Co nanoparticles

Functionalized multi-walled carbon nanotube based sensors for distributed methane leak detection

A capacitive micromachined ultrasonic transducer (CMUT) array as a low-power multi-channel volatile organic compound (VOC) sensor

Design, fabrication and performance evaluation of interdigital capacitive sensor for detection of Cardiac Troponin-I and Human Epidermal Growth Factor Receptor 2

Noninvasive measurement of aqueous glucose solution at physiologically relevant blood concentration levels with differential continuous-wave laser photoacoustic technique

Electrodeless, non-invasive stimulation of retinal neurons using time-varying magnetic fields

A biomicrosystem for simultaneous optical and electrochemical monitoring of electroactive microbial biofilm

Trace level VOC gas detection of developed CNT based micropreconcentrator for breath analysis

Fast and low-cost detection of silver nanoparticles by using the $Ag^{+}-specfic$ cytosine probe

Single-loop fiber ATR sensor enhanced by silver nanoparticles for continuous glucose monitoring

Sensitive and quantitative DNA detection by beads-based dielectrophoretic impedance measurement

Design and fabrication of SiO waveguide-based SAW sensors with filled microcavities

Development of flexible dry ECG electrodes based on MWCNT/PDMS composite

Wearable wireless sensor for estrus detection in cows by conductivity and temperature measurements

Piezo-phototronic UV photosensing with ZnO nanowires array

Use of metal mesh sensors with periodic microstructures to sense and separate aerosol particles in Kenya

A proposed optical-based sensor for assessment of hand movement

New setup for a real time high resolution UV-LED absorption spectroscopy

Raman spectroscopy for analyzing anthocyanins of lyophilized blueberries

Photonic crystal based force sensor on silicon microcantilever

Magnetic field sensor based on a single mode-multimode-single mode optical fiber structure

Very high displacement to voltage ratio MEMS thermal actuator

Elimination of nonlinearity in sigma delta MEMS accelerometer

Ultra-thin film piezoelectric AlN cantilevers for flexible MEMS sensors

Towards resonant sensing in liquids by using CMOS MEMS capacitive oscillators

Reduction of contact force dependence on the MEMS hardness sensor using reference plane to detect human body hardness

A PDMS based triboelectric energy harvester as self-powered, active tactile sensor system for human skin

A CMOS stress sensor chip with integrated signal processing circuits

Extraction of heartbeat signal from airflow at mouth by flow sensor

Responsible time shorting of flexible thermal flow sensor for medical applications

In-plane Βulk-Micromachining fabrication of high dynamic range tactical grade open loop and closed loop MEMS accelerometers

Toward a wireless contact lens sensor system with a micro-capacitor for intraocular pressure monitoring on in-vitro porcine eye

Micromachined silicon hemispherical resonators with self-aligned spherical capacitive electrodes

Novel PCB-based thermal flow sensors for air conditioning systems

Temperature robustness design for double-clamped MEMS sensors based on two orthogonal stress-immunity structure

Electrochemical vibration sensor with force balance feedback system

Temperature dependence of the quality factor in LC-type passive wireless temperature sensors

Detection of ultrasound pressure distribution for remote measurement of haptic surface roughness

MEMS μ-wire magnetic field detection method@CERN

SAW device for liquid vaporization rate and remaining molecule sensing

A miniature system for particulate matter (PM) measurement

Non-invasive monitoring of electrical parameters of Schefflera arboricola leaf

A portable E-nose system for classification of Chinese liquor

The fluid viscosity measurement based on variable cross-section MEMS cantilever under torsional excitation

Development of patch-type sensor module for battery-free power transfer and data transmission

Highly sensitive capacitive tactile sensor based on silver nanowire using parylene-C stencil patterning method

Enabling modular plug&play wireless sensor and actuator network nodes: Software architecture

Configuring artificial neural networks for the prediction of available energy in solar-powered sensor nodes

GDOP index in UWB indoor location system experiment

Analysis of the NLOS channel environment of TDOA multiple algorithms

Sensor network serial communication system with high tolerance to timing and topology variations

Augmented DTN based energy efficient routing protocol for vehicular ad hoc networks

Model-based rendezvous calibration of mobile sensor networks for monitoring air quality

Path prediction-based sensor filtering method

Description and recognition based on directional motion vector for spatial hand gestures

Inertial sensing for gait analysis and the scope for sensor fusion

A novel frequency tuning design for vibration-driven electromagnetic energy harvester

Pore water pressure sensor for landslide prediction

Single image super resolution infrared camera using carbon nanotube photodetector

Downhole viscosity measurement platform using tuning fork oscillators

Electromagnetically controlled convex micromirror for focal length variation

A novel MEMS chip-based atmospheric electric field sensor for lightning hazard warning applications

A barometer-IMU fusion method for vertical velocity and height estimation

Non-contact electric-coupling-based and magnetic-field-sensing-assisted technique for monitoring voltage of overhead power transmission lines

Optimizing pressure sensor array data for a smart-shoe fall monitoring system

Age detection of lubricating oil with on-line sensors

An 8-channels O.13μm-CMOS front-end for ATLAS MDT-detectors

The IoT wearable stretch sensor using 3D-Graphene foam

ZnO activation of aluminum for energy generation in physiological saline buffer

Optical mouse as pH analyzer

CNC machining of lithium niobate for rapid prototyping of sensors

Compensation of THz spectrum spurious oscillations by local apodization

Development of a high-gain high-isolation low-power receiver for wireless body area sensor network application system

An automated, self sustained soil moisture measurement system using low power dual probe heat pulse (DPHP) Sensor

Oxide or metal interface damage improvement of deep silicon etch process by low power RF of low frequency

Fabrication of TiO nanotube on silicon substrate by two-step anodic oxidation for wafer level supercapacitors application

A thin film flexible thermoelectric generator with a fully electrical, low startup voltage and high efficiency DC — DC converter

A low-power wireless bondwire inertial sensor system

Composite rubber electret with piezoelectric 31 and 33 modes for elastically electromechanical sensors

3D printed features in the 100 μm range for application in sensing

Live demonstration: Modular multi-radio wireless sensor platform with plug&play modules connection

Live demonstration: Prosthetic hands controlled with a highly usable sEMG sensor

Live demonstration: Upper limb prosthetic control using toe gesture sensors and various touch interfaces

Live demonstration: Microsystem integration of a palladium-based MEMS hydrogen gas sensor

Live demostration: ‘Ripple sort’ algorithm, circuit implementation and verification using VHDL synthesisable testbench verification technique

Live demonstration: LDV_UPI system for structural health monitoring of composite material

Live demonstration: CMOS BEOL-embedded 3-axis accelerometer

Live demonstration: A new adaptive front-end readout circuit for high-resolution magnetic scales

Development of screen printed electrochemical sensors for selective detection of heavy metals

Detection of heavy metal ions using screen printed wireless LC sensor

Disposable breath tubes with on-tube nanowire sensor array for non-invasively on-site sensing of lung cancer biomarker

Inkjet-printed dual microfluidic-based sensor integrated system

A flexible electrochemical sensor modified by graphene and AuNPs for continuous glucose monitoring

Carbon nanotube based gas sensor arrays on rigid and flexible substrates

A sub-1G CMOS-MEMS accelerometer

A tunable digitally operated MEMS accelerometer

Design and fabrication of self-packaged, flexible MEMS accelerometer

A simple out-of-plane capacitive MEMS accelerometer utilizing lateral and vertical electrodes for differential sensing

Fabrication of a three-axis capacitive MEMS accelerometer on a single substrate

Digital output flexible tilt sensor with conductive microspheres

Enhanced tracking system based on micro inertial measurements unit to track sensorimotor responses in pigeons

Human gait monitoring using body-worn inertial sensors and kinematic modelling

Efficient characterization of tennis shots and game analysis using wearable sensors data

Hidden Markov Model based driving event detection and driver profiling from mobile inertial sensor data

Novel multiple-functional IMU-based wearable air mouse for the simultaneous operation with (Air) keyboards

An EMG-based system for pre-impact fall detection

Miniature fourier transform spectrometers based on electrothermal MEMS mirrors with large piston scan range

A fiber Fabry-Perot interferometer for geophysics applications

Photoacoustic signal measurement using thin film Fabry-Perot optical interferometer for photoacoustic microscopy

An ultra-high sensitivity Fabry-Perot acoustic pressure sensor using a multilayer suspended graphene diaphragm

Biomedical applications of tunable liquid lenses

A calorimetric biosensing system for clinical diagnostic applications

Cantilever sensors based on sialylglycopolymer virus receptor with different readout systems

Monitoring yeast activation with sugar and zero-calorie sweetener using terahertz waves

Resonator sensor array for synovial fluid characterization

A monolithically integrated multi-sensor platform

Effects of stability asymmetry in parametrically actuated MEMS sensors on phase flip probability

±2ppm frequency drift and 300x reduction of bias drift of commercial 6-axis inertial measurement units using a low-power oven-control micro platform

Development of SAW acceleration sensor with excellent temperature stability

The phase sensitivity and response time of an X-band dual channel microwave phase detector

A novel high sensitivity MEMS acoustic gyroscope by measuring phase shift

Chemical sensing via single input — Multi output approach

Development of new gas sensors based on oxidized galinstan

A micro electrochemical sensor based on bismuth-modified mesoporous carbon for hexavalent chromium detection

Mode ordering in tuning fork structures with negative structural coupling for mitigation of common-mode g-sensitivity

Tactical grade MEMS gyro with low acceleration sensitivity

All-digital MEMS gyro-sensor using TAD-digital-synchronous-detection (TAD-DSD) By TAD-ADPLL

A temperature compensation method for micromachined thermal gas gyroscope

Transduction performance of piezoresistive silicon nanowires on the frequency resolution of a resonant MEMS sensor

Sensor based on the mode-localization effect in electrostatically-coupled MEMS resonators fabricated using an SOI process

Determination of gas source existence in a specified area by active airflow generator robots

Rapid prototyping of a flexible microfluidic sensing system using inkjet and screen printing processes

A microfluidic prototype for scaling-up microbial fuel cell systems

Enhancing robustness and applicability of contactless inductive flow tomography

Flow sensor for field measurement of viscous liquid usage for consumer studies

Acoustic sensor for in-line monitoring in polymer extrusion dies

A novel near-field terahertz imaging probe for biological imaging

Optical sensor system for the detection of mold: Concept for a fully automated sensor system for the detection of airborne fungal spores

Microfabricated optoelectronic neural implants for optogenetics

Upside-down Carbon nanotube (CNT) micro-electrode array (MEA)

A cell-based odor sensing system using fluorescent technique and lock-in measurement robust against disturbance

Basic study for tactile and visual texture measurement by multimodal MEMS sensor with force and light sensitivity

Wireless sensors for automated control of total incombustible content (TIC) of dust deposited in underground coal mines

Wireless sensor network based flood/drought forecasting system

Wearable driver drowsiness detection system based on biomedical and motion sensors

Wireless low-power temperature probes for food/pharmaceutical process monitoring

Novel polymer materials for low-cost nitro vapor detection sensors

Selective hydrogen sensing by cobalt doped ZnO thin films: A study on carrier reversal conductivity

Highly sensitive, graphene oxide supported zinc stannate (Zn) nanocubes and their room temperature NO gas sensor properties

The investigation of reduced graphene oxide/titanium dioxide-based sensor for formaldehyde detection at room temperature

A novel low-cost pre-concentrator concept to boost sensitivity and selectivity of gas sensor systems

Development of a biomimetic eardrum for acoustic sensing

Investigations of PMN-PT composites for high sensitive ultrasonic phased array probes in NDE

Optimal geometry of CMOS voltage-mode and current-mode vertical magnetic hall sensors

A noninvasive AC current sensor with permanent-magnet biased PZT cantilever

A magnetic sensor to measure wear in centrifugal pumps

Microfabricated magnetoelastic sensors and actuators: Opportunities and challenges

Upper limb prosthetic control using toe gesture sensors

Printed capacitive touch sensors embedded in organic coatings on sheet steel

A pressure/temperature sensor embedded in an endoscopy hood for intraluminal monitoring during flexible endoscopic operation

Miniature self-calibrated fiber optic tip temperature and pressure sensor

Flat panel fingerprint optical sensor using TFT technology

Robust fringe detection based on bi-wavelet transform for self-mixing displacement sensor

Multimode semiconductor lasers for adaptive self-mixing sensors

A microfabricated low-cost Au nanotip pyramidal electrode array using anisotropic etching for enhanced performance of a glucose biosensor

A simple and highly sensitive electrochemical platform for detection of MicroRNAs

High R ratio liquid based memristor sensor using sol gel spin coating technique

A highly usable and customizable sEMG sensor for prosthetic limb control using polypyrrole-coated nonwoven fabric sheet

Three-dimensional graphene-polydimethylsiloxane composite as a conductive substrate for cell-based electrochemical detection

A fully integrated CMOS interface ASIC for two-axis piezoelectric angular rate MEMS inertial sensors

Calculating depth image with pixel-parallel processor for a TOF image sensing system

A new adaptive front-end circuit for high-resolution magnetic scales

A smart sensory platform based on field programmable analog array

Measurement uncertainty of time-based and voltage-based wheatstone bridge readout circuits

A low-power readout circuit design for capacitive microsensors

Mathematical model for biomolecular quantification using surface-enhanced Raman spectroscopy based signal intensity distributions

Towards proper acceleration estimate by using spectral acceleration information. Application to train transportation

Acoustic streaming driven by immersed resonator structures

Microcavity assisted acoustic wave channeling can lead to high sensitivity and ultra-low power SAW sensors

Behavioral modeling and experimental validation of uncooled microbolometer

One computer-aided equivalent circuit model of a MEMS phase detector applied in phase locked loops

Adaptive sensor fusion technology for mobile and wearable applications

Modal coupling error suppression in micromachined gyroscopes by UV laser trimming

A novel feature extraction algorithm for on the sensor node processing of compressive sampled photoplethysmography signals

Improved path loss prediction model for short range indoor positioning using bluetooth low energy

Detection of volatile organic sulfur compounds (VOSCs) by SAW sensor based on hydrogen-bond acidic polymers

Optical gas sensor based on LSPR using ZnO nanoparticles and AAO nanostructure

Enhancement humidity sensing properties of graphene oxide/Poly(ethyleneimine) film QCM sensors

Alignment-less microchannel integration onto a stacked carbon electrode set for highly sensitive electrochemical sensor applications

The effect of electrolyte concentration on the characteristics of MEMS based electrochemical seismic sensors

Ink-jet printed flexible gas sensors based on electromagnetic transduction and carbon materials

A highly selective MEMS transducer for hydrogen sensing based on stress modification in palladium thin films

Investigation of Zinc phthalocyanine films for QCM sensing applications

The gas multisensor chip fabricated by direct electrochemical deposition of tin oxide

Selective quantification of humidity and ammonia by optical excitation of molecular semiconductor-doped insulator (MSDI) sensors

Nickel oxide thin film sensor for fluctuation-enhanced gas sensing of formaldehyde

Design and fabrication of a MEMS magnetic sensor utilizing ferromagnetic-piezoelectric composites

Ultra-sensitive and label-free biosensors using surface plasmon resonance of nano-grating structure in nanofluidic preconcentrator

Hydrogel matrix effects on oxygen diffusion: Controlling properties for biosensor applications

A stretchable and wearable printed sensor for human body motion monitoring

Non-enzymatic graphene-based biosensors for continous glucose monitoring

Electrical characterization of nanostructured 3D microelectrodes for retinal neuron stimulation

Thermal measurement of cerebrospinal fluid flow rate in hydrocephalus shunt

Droplet DNA binding detection on microfluidic flow-focusing

Development of amperometric ion sensor array for multi-ion detection

Highly sensitive SAM modified electrospun zinc oxide nanofiber based label free biosensing platform

Detection of L-Histidine using solution-processed ZnO nanopillar

Frequency characterisation of an optically-interrogated Rogowski coil for smart grid protection applications

D-shape optical fiber pH sensor based on Lossy Mode Resonances (LMRs)

Extrinsic optical fibre bending sensor for spine monitoring

Lens-free automated cell detection system for telemedicine application

Dynamic positioning sensing system for estimating size and depth of embedded object

A fiber-optic pH sensor with wireless Radio over Fiber read-out

Current source dedicated for direct digital synthesizers: Application to the giant magneto-impedance (GMI) sensors

Tunable eddy current device for the contactless characterization of a large variety of semiconductor materials

A temperature self-calibrating torsional accelerometer with fully differential configuration and integrated reference capacitor

MEMS flow sensors with silicon-carbide erosion resistant coating

Fabrication of a high sensitivity MEMS accelerometer with symmetrical double-sided serpentine beam-mass structure

Development of stretchable strain sensor using elastic fibrous membrane coated with conducting polymer

Inductive detection of gas bubbles in a liquid metal flow: A contactless and non invasive methode

Implementation of the Digital-Down-Conversion (DDC) and software for the optimization of the Giant Magneto-Impedance (GMI) sensors

Performance analysis of miniaturized PCB coils for small-aperture magnet qualification

Development of a hall-effect based skin sensor

Wi-Fi-connected radiation measurement system by small-scale solar energy harvesting

A handy motion driven, frequency up-converting piezoelectric energy harvester using flexible base for wearable sensors applications

Pressure compensation behavior inside an EWOD oscillator

Electrowetting interfacial tension measurement system

The study of a RF MEMS switch based on LCP substrate

A milli-volt triggered MEMS paddle switch

Fabrication of microcoil with large tilt-angle on polymer tube for electromagnetically-driven scanner in single fiber endoscope

Study on the PZT diaphragm actuated multiple jet flow in a circulatory miniaturized system

A wireless multi-sensor system for soil moisture measurement

Acoustic echo path delay estimation by means of a BOC-BPSK correlation method

HRCCTP: A hybrid reliable and congestion control transport protocol for wireless sensor networks

Internet of things: Sensor to sensor communication

Cloud-based remote environmental monitoring system with distributed WSN weather stations

Ubiquitous monitoring of pedestrian dynamics: Exploring wireless ad hoc network of multi-sensor technologies

A mesh network for mobile devices using Bluetooth low energy

TRCCTP: A traffic redirection based congestion control transport protocol for wireless sensor networks

Design of cryogenic flow meter using fiber Bragg grating sensors

Mobile robot localization system using multiple ceiling mounted cameras

STR-octree indexing method for processing LiDAR data

Turbidity monitoring of lake water by transmittance measuresment with a simple optical setup

Reflection based blood pulsation measurement using linear polarization of light

Hyperspectral imaging applied to the identification and classification of asbestos fibers

In-orbit error calibration of star sensor based on high resolution imaging payload

A portable system for estimation of chemical oxygen demand in wastewater using ultraviolet-visible spectroscopy

Fourth-person sensing for a service robot

Sensing fresh water contamination using fluorescence methods

Real-time whitening application to two microphone sensors for comb filtering and smoothing

A novel dual pipeline ultrafast real-time ‘Ripple sort’ algorithm and circuit implementation

Fabrication of CMUTs with a low temperature wafer bonding technology

A fluxgate magnetometer for navigation and sensing: Noise character and digital filtering

Fabrication of SWNTs/α-Fe as room-temperature LPG sensor

GEMINI, a CMOS 180 nm mixed-signal 16-channel ASIC for Triple-GEM detectors readout

Multi-dimensional vibration energy harvester for efficient use in common environment

Energy harvesting from food waste by inoculation of vermicomposted organic matter into Microbial Fuel Cell (MFC)

A high-performance self-clocked digital-output quartz gyroscope

A characterization method for projected capacitive touch screen panel using 3-port impedance measurement technique

Influence of deposition temperature on TiO films for infrared image sensor applications: TiO films: Infrared image sensor applications

Custom PXIe-567X software defined interrogation signal generator for surface acoustic wave based passive rfid

Phosphate sensors based on Co-Cu electrodes fabricated with a sacrificial glass fiber paper template

ISFET-based pH sensor composed of a high transconductance CMOS chip and a disposable touch panel film as the sensing layer

Selective electrochemical sensor for phosphate determination toward a silicate interference free method in freshwater

Chemical analysis of thin ALD-Al films and their applications as pH-sensitive layers in CMOS-compatible Ion-Sensitive Capacitors (ISCAP)

A microfluidic device fully integrated with three pH sensing electrodes and passive mixer for nanoparticle synthesis

Evaluating contact force based on displacement measurement of cantilever beams for MEMS switches and sensor applications

MEMS-based capacitive pressure sensors with pre-stressed sensing diaphragms

Novel method to operate piezo-FET-based stress sensor offers tenfold increase in sensitivity

Characterization of BiFeO thin film for tactile sensor using microcantilevers with piezoelectric capacitor and strain-gauge

Microcantilever arrays coated with photoactive polymeric brushes as systems to measure photo-induced surface stress changes

Tunable quality factor through 1:1 modal coupling in a disk resonator

Highly-symmetric silicon dioxide shallow shell resonators with angstrom-level roughness

Degenerate modes of operation in lithium niobate sensors

Sensor design and calibration of piezoresistive composite material

Nonlinear dynamics of circular capacitive micromachined ultrasonic transducers

A new method for mapping fields in coupled cylindrical dielectric resonators

Palmtop sensor for detection of viruses based on optical waveguide mode

A two-dimensional fluorometric imaging "sniffer camera" of ethanol vapor for evaluation of alcohol metabolism using enzymatic reaction

Discrimination of target proteins using arrayed fluorescent liposomes incorporated with cholesterol by principal component analysis

SERS-based hydrogel sensors for pH and enzymatic substrates

High-throughput droplet-based screening system for investigating microalgae library

Nanomaterial integrated microfluidic devices for virus analysis

Integration of fractal biosensor in a digital microfluidic platform

An electrochemical sensor system with renewable copper modified electrode for continuous nitrate determination

A renewable BOD microsensor based on magnetically functionalized microorganism and ultramicroelectrode array

Facile detection of Troponin I using dendritic platinum nanoparticles and capillary tube indicators

Multimodal analog front-end for wearable bio-sensors

A mutual-capacitive touch sensor ROIC using a PLL to reduce LCD noise by synchronizing ROIC TX clock to LCD clock

All-digital-ADC TAD in sensor digitization for scaling over wide temperature ranges

Silicon carbide based instrumentation amplifiers for extreme applications

Interface circuit for three-electrode metal-oxide (MOX) gas sensor

Concentration-independent fingerprint library of volatile organic compounds based on gas-surface interactions by self-assembled monolayer functionalized film bulk acoustic resonator arrays

Chemical sensing based on graphene-aluminum nitride nano plate resonators

Polymer coated film bulk acoustic resonator (FBAR) arrays for Indoor Air Quality (IAQ) monitoring

Inkjet — Printed graphene layer by layer on SAW devices for gas detection applications

A polymer based sensor for phosphate detection in water

Towards low-cost printed flow sensors

A 2D particle velocity sensor with minimal flow-disturbance

U-shaped wire based resonators for mass density and viscosity sensing

Application of carbon nanotube and graphene nanocomposites for fabrication of micro-bolometers

MOS-capacitor-based ionizing radiation sensors for occupational dosimetry applications

CMOS BEOL-embedded lateral accelerometer

An integrated potentiostat sensor with digitally-controlled input-parasitic compensation for nanopore applications

A new method for measuring the temperature-dependent dielectric constant of the PDMS fluids

A delay locked loop for instantaneous time-of-flight sensing based on a CMOS demodulation detector

Robust digital calibration engine for MEMS inertial sensor systems

Smartphone-based system for the monitoring of vital parameters and stress conditions of amatorial racecar drivers

High temperature reliability and failure of W-based microhotplates

Radioluminescence based optical fibre sensor for radiation monitoring during brachytherapy

Tapered photonic crystal fiber based Mach-Zehnder interferometer for enhanced refractive index sensing

Interferometric fiber-optic current sensor with inherent source wavelength shift compensation

Refractometer using photonic crystals for fermentation process characterization

Temperature-compensated optimized relative humidity and refractive index sensors using a hybrid fibre grating configuration

Heat event detection in dairy cows with collar sensors: An unsupervised machine learning approach

A study of sensor derived features in cattle behaviour classification models

Design of a memory-card based low-cost GPS data-logger for livestock monitoring

Visualisation of acoustic entropy index for rainforest health monitoring system

Detection of gunshots using microphone array mounted on a moving platform

Combination of radar and audio sensors for identification of rotor-type Unmanned Aerial Vehicles (UAVs)

A 0.13μm-CMOS 90μW 51dB-SNR continuous-time accelerometer front-end with 10b SAR-ADC

A CMOS digitized monolithic sun sensor transducer with calibration circuits for monitoring solar radiation of tomato crops

HVCMOS pixel sensors

Batteryless 900-μs-latency FM transmitter powered by piezoelectric generator for wireless electronic drums

Temperature compensated MEMS oscillator using structural resistance based temperature sensing

Batteryless sensorless bicycle speed recorder with hub dynamo and STT-MRAM

Multi-functional 3D printed and embedded sensors for satellite qualification structures

A survey of printable piezoelectric sensors

3D printed bio-inspired angular acceleration sensor

3D printed multi-channel EEG sensors for zebrafish

Moball: An intelligent wind-opportunistic mobile sensor to monitor the polar regions

An electrochemical seismometer with frequency features under regulation

Fabrication of a hydrophilic property impedance sensor to stably monitor soil water content for slope failure prognostics

A surface conductance based fully integrated standard CMOS humidity sensor without post-processing

Separate experimental investigation of the influence of liquids' mass densities and viscosities on the frequency response of resonant sensors using designated liquid series

A novel MEMS-based piezoelectric multi-modal vibration energy harvester concept to power autonomous remote sensing nodes for Internet of Things (IoT) applications

Magnetic domain observation of stepped giant magneto-impedance sensor with subjecting to normal magnetic field

Asynchronous, electromagnetic sensor fusion in RatSLAM

Improved droplet size stability using phase-guide structures

Tomography defined as sensor fusion

Low temperature, 400 °C, pure boron deposition: A solution for integration of high-performance Si photodetectors and CMOS circuits

Pulsed TOF laser rangefinding with a 2D SPAD-TDC receiver

A novel blue-enhanced photodetector using honeycomb structure

Continuous-wave time-of-flight CMOS detector with common-mode feedback for strong background light applications

A high efficiency UV-VIS organic photodetector by an invertedPTB7: PCBM bulk heterojunction structure

Power allocation in sensor networks for surveilling security zones

Vibration energy harvesting and management for wireless sensor networks in bridge structural monitoring

RF energy harvester-based wake-up receiver

Analysis of low energy consumption wireless sensor with BLE

Piezoelectric micromachined ultrasonic transducers for human-machine interfaces and biometric sensing

Tactile and proximity measurement by 3D tactile sensor using self-capacitance measurement

Design and modeling of 1000ppi fingerprint sensor

An integrated and wearable healthcare-on-a-patch for wireless monitoring system

Design of a novel magnetic field generator: Applied in dynamic characteristics measurement of magneto-dependent sensors

A thermal network model for piezoresistive pressure sensors

Research on response time of thermoelectric power sensor

3D model of the thermoelectric microwave power sensor by MEMS technology

"Modeling memristive biosensors"

Detection of ungrounded objects on mutual capacitance touch screens

Differential capacitively coupled contactless conductivity detection $(DC^{4}D)$ sensor for detection of object in microfluidic channel

Near real-time reconstruction of 2D soil gas distribution from a regular network of linear gas sensors

Room temperature sensing performance of graphene-like SnS2 towards ammonia

[6,6]-Phenyl C butyric acid methyl ester/α-sexithiophene hetero-junction thin film transistors gas sensors for ammonia detection

Amorphous indium gallium zinc oxide thin film-based ozone sensors

Detection of seasonal allergic rhinitis from exhaled breath VOCs using an electronic nose based on an array of chemical sensors

Dopamine sensing upon amphetamine administration

An experimental study of 3D odor plume tracking using multicopter with gas sensor array

High-sensitivity parametrically amplified chemo-mechanical vapor sensors

Room temperature alcohol sensors based on PANi/MWCNT composite thin film

Effects of post-thermal annealing on the performance characteristics of Pd/GaN Schottky diodes hydrogen sensors

Room temperature gas sensing with potassium titanate nanowires

Direct partial CH termination into carboxyl terminated diamond surface for biosensor

Fabrication of ferrocene modified microsensors for the sensitive detection of glutamate

Development of a real-time QCM bond-rupture system for POCT applications

Patterning an enzyme-membrane of bio-image sensor using lithography technique

High sensitivity rare cell capturing biochip with separable microstructures

Sensing and quantification of salivary beta-amyloid peptides and protein sequencing for the saliva of normal and AD patients

Chemostat-like microfluidic platform for highly sensitive detection of heavy metal ions using microbial biosensors

Development of integrated flexible penetrating microelectrode array with interconnection cable for use in various nervous systems

New copolymer brushes for label-free affinity biosensors

High-throughput and real-time microalgae monitoring platform using lens-free shadow imaging system (LSIS)

Ge/Ge heterostructure infrared photodetector

Time-resolved detection of x-ray generated pulses on coplanar stripline sensors

Fiber optic refractometer based in multimode interference effects (MMI) using Indium Tin Oxide (ITO) coating

Room temperature deposition of highly sensitive vanadium oxide films for infrared light sensing applications

Utilizing new erbium-doped fiber laser scheme for long-distance fiber Bragg grating (FBG) sensor system

Mode-switching VCO and double balanced mixer in optical communication and sensor application

MASH2-0 electromechanical sigma-delta modulator for capacitive mems sensors with digital filter calibration using Simulated Annealing

Optimization of a bio-inspired sound localization sensor for high directional sensitivity

A novel flexographic printed strain gauge on paper platform

Measurement of 3-D vibration by dynamic photogrammetry using least-square image matching for sub-pixel targeting

A flexible strain-gauge sensor for flexible input devices

Design and fabrication of buckled metal strain gauges using shape memory polymer and inkjet additive microfabrication

Design and fabrication of individualized capacitive microsensor for tilt measurement

Underwater observation of vibration behavior of the miniature circular piezoelectric micromachined ultrasonic transducers

Highly flexible and sensitive graphene-silver nanocomposite strain sensor

PVDF based artificial canal lateral line for underwater detection

Skin force sensor using piezoresistive PEDOT:PSS with arabitol on flexible PDMS

High temperature pressure sensor using Cu-Sn wafer level bonding

High-speed sensing of softness during grasping process by robot hand equipped with tactile sensor

Development of an actuation system for a rotary hydraulic brake on a low cost light weight knee-ankle-foot orthosis

Energy efficient routing scheme using leader election in ambient energy harvesting wireless ad-hoc and sensor networks

Distance control between multiple drones for stable communication

Deployment algorithms for coverage improvement in a network of mobile sensors with measurement error in the presence of obstacles

Traffic deduction exploring sensor data's intra-correlations in train track monitoring WSN

Compact wireless sensor network for web and mobile applications

Comparative analysis of a contention based (RI-MAC) and TDMA based (ATMA) MAC protocols for Wireless Sensor Networks

Design and implementation of a connected farm for smart farming system

Capacitor charging using aluminum/phosphate-based cell

Dynamical threshold setting method using outlier rejection test for sensor reaction detection

Fluidics-based plant study platform with colorimetric humidity monitoring

Smart chair based on multi heart rate detection system

Photoplethysmography as a form of biometrie authentication

Robotic gas source localization assisted by active airflow generation

Experimental validation of mouse EEG sensor through the analysis of visually evoked potential elicited by successive flash stimuli

3D multi-function bio-sphere Drosophila behavior platform

Implementation of wide range soil moisture profile probe by coplanar plate capacitor on film substrate

Electrochemical impedance spectroscopy for in situ monitoring of early zeolite formation

A CMOS BEOL accelerometer low-noise readout amplifier with 4.2 zF/√Hz total noise floor

Theoretical analysis and simulation of SU-8 microneedles for effective skin penetration and drug delivery

Simple and efficient interface circuit for vibration electrostatic energy harvesters

Birdcage type NMR receiver coil sensor with integrated detuning circuit for 3T MRI system

A low-power integrated circuit for interfacing a capacitive micromachined ultrasonic transducer (CMUT) based resonant gas sensor

Inductive sensing technique for low power implantable hydrogel-based biochemcial sensors

Advanced conformal parylene fabrication for micro/nano devices

Embedded sacrificial layers for CMUT fabrication

Directed growth of metal nanoparticles on substrates by polarized light irradiation

Piezoelectric strain sensor array fabricated by transfer printing methods

MoS nanosensors fabricated by dielectrophoretic assembly for ultrasensitive and rapid sensing of volatile organic compounds

Biomimetic magnetic nanocomposite for smart skins

Universal double-spatial-resolution solution for capacitive tactile sensors

Piezoelectric PVDF thin films with asymmetric microporous structures for pressure sensing

Silver nanowire strain sensors for wearable body motion tracking

Fully printed and flexible piezoelectric based touch sensitive skin

Game theoretic approach towards energy-efficient task distribution in wireless sensor networks

Energy efficient weighted sampling matrix based CS technique for WSN

Improving sensor-fusion with environmental models

An ultraviolet radiation sensor using differential spectral response of silicon photodiodes

Improved photo response of hybrid ZnO/P3HT bilayered photo diode

Organic photodetectors with active layer patterned by lithography

X-ray detectors based on $p^{+}-Si/n-ZnO$ abrupt heterojunctions

High-speed gated CMOS detector for fluorescence lifetime microscopy extending to near-infrared wavelengths

Improving the reliability of carbon nanotube based infrared sensors

Spherical magnetic energy harvester with three orthogonal coils

Low power adaptive power management with energy aware interface for wireless sensor nodes powered using piezoelectric energy harvesting

A piezoelectric micro-energy harvester for nanosensors

Electret stability related to the crystallinity in polypropylene

Plug-through energy monitor for plug load electrical devices

Miniaturized two stage aerosol impactor with chip-scale stages for airborne particulate size separation

Comparison of two types of tactile sensing layer in touch screen panel for force sensitive detection

Fully biodegradable pressure sensor, viscoelastic behavior of PGS dielectric elastomer upon degradation

Latest results on the HV-CMOS pixel sensor in the ams H18 process

A motion-tolerant heart rate detection method using bio-impedance and MUSIC algorithm

Development of a three-dimensional integrated image sensor with pixel-parallel signal processing architecture

Terahertz gas-sensors: Gas-phase spectroscopy and multivariate analysis for medical and security applications

A two-channel bacteria-based biosensor for water quality monitoring

A novel olfactory neural network for classification of Chinese liquors using electronic nose

Portable active sensors for human sweat rate monitoring

TDLAS using FPGA-based lock-in detection for multi-channel Chemical Species Tomography

An RF/microwave microfluidic sensor for miniaturized dielectric spectroscopy based on sensor transmission characteristics

Performance of the engineering model of the CSES high precision magnetometer

A machine learning approach to find association between imaging features and XRF signatures of rocks in underground mines

A novel capacitive micromachined transducer for micro-pressure measurement

A surface acoustic wave sensor terminal based on one-port resonator for contact stress measurement in slits

Estimating particulate matter using COTS cameras

Finger motion detection glove toward human-machine interface

Real-time reconstruction of footprint positions using an "intelligent carpet" imaging sensor

Vision-based interface for people with serious spinal cord injury

Smart optrode for neural stimulation and sensing

Memristor-based pixel for event-detection vision sensor

Three sources, three receivers, six degrees of freedom: An ultrasonic sensor for pose estimation & motion capture

Wafer-level fabrication of strain gauges on PDMS membranes for low-pressure sensing

Encroachment and line of sight blocking in micro-cavity sealing

Modulate the chamber pressure of the hermetic sealed MEMS device by varying the cavity depth of cap Si

A novel optical self-alignment technology for realization of compact optical multi-gas sensor system

IEEE SENSORS 2014 Proceedings

2013 IEEE SENSORS

2012 IEEE Sensors

2011 IEEE SENSORS Proceedings

2010 IEEE Sensors

2009 IEEE Sensors

2008 IEEE Sensors

2007 IEEE Sensors

2006 5th IEEE Conference on Sensors

IEEE Sensors, 2005.

Proceedings of IEEE Sensors, 2004.

Proceedings of IEEE Sensors 2003 (IEEE Cat. No.03CH37498)

Proceedings of IEEE Sensors

Magnetic field sensor based on a single mode-multimode-single mode optical fiber structure

Content Provider	IEEE Xplore Digital Library
Author	Ascorbe, J. Corres, J.M. Arregui, F.J. Matias, I.R.
Copyright Year	2015
Description	Author affiliation: Electr. & Electron. Eng. Dept., Public Univ. of Navarra, Pamplona, Spain (Ascorbe, J.; Corres, J.M.; Arregui, F.J.; Matias, I.R.)
Abstract	A single mode-multimode-single mode structure (SMS) has been used for developing a magnetic field sensor without using magnetic fluids. The SMS optical fiber was coated with a magneto-optical material by means of sputtering. The sputtering process was monitored in order to achieve the optimum thickness of the coating and the best sensitivity. Sensitivities of 1.45 dB/T and 6 nm/T have been achieved. Repeatability in the fabrication and in the behaviour of the device has been checked.
Sponsorship	IEEE
Starting Page	1
Ending Page	4
File Size	1275642
Page Count	4
File Format	PDF
e-ISBN	9781479982035
DOI	10.1109/ICSENS.2015.7370226
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2015-11-01
Publisher Place	South Korea
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Magnetic fields Optical fibers Optical fiber sensors Periodic structures Magnetic liquids Sputtering magneto-optic materials optical fiber sensor magnetic field sensor single mode-multimode-single mode SMS structure optical fiber interference thin films
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in