NDLI: Bottom-side wave solder process compatibility for 14 and 16-pin gull wing SOICs

Content Provider	IEEE Xplore Digital Library
Author	Yang, C.M. Shook, R.L.
Copyright Year	1995
Description	Author affiliation: AT&T Bell Labs., Whippany, NJ, USA (Yang, C.M.)
Abstract	Results are summarized on the process compatibility for bottom-side wave soldering of eleven different 14 and 16-pin plastic encapsulated Small Outline Integrated Circuits (SOICs) in a Gull Wing foot print (SOGs). Devices were preconditioned to a saturated moisture exposure of 85/spl deg/C/85%RH for 168 hours (to simulate a worst case storage environment equivalent to 30/spl deg/C/90%RH) before exposure to a total molten solder immersion at 260/spl deg/C. A low solids flux and a terpene hydrocarbon cleaning were applied for process chemical exposure. Damage analysis was assessed through the use of C-mode Scanning Acoustic Microscopy (C-SAM) followed by Temperature-Humidity-Bias (THB) life testing. The results of these test procedures showed that nine out of eleven device codes successfully passed the wave-solder process compatibility testing. Two codes did not pass all criteria established for the process compatability. One of these codes was found to fail because of internal cracking of the mold compound. Cracks were found to originate at the top of the die and propagated laterally towards the edge of the packages. A Finite Element Model was developed for predicting internal stresses that developed during the solder immersion process. Finite Element analysis indicated that the cracking behavior is associated with the development of high stresses at the die edge as a result of a large distributed water-vapor pressure built up in die surface delaminations. Based on the experimental results and the Finite Element Analysis, it is concluded that the observed moisture induced cracking is a function of both the size of the paddle as well as the die. For those devices included in this study it is considered that wave-solder process compatibility for non-dry bagged 14 and 16 pin SOGs can be assured provided a maximum allowable paddle-to-package size is maintained.
Starting Page	70
Ending Page	77
File Size	1284263
Page Count	8
File Format	PDF
ISBN	0780327365
DOI	10.1109/ECTC.1995.514364
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	1995-05-21
Publisher Place	USA
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Finite element methods Moisture Acoustic testing Soldering Plastics Foot Circuit simulation Solids Hydrocarbons Cleaning
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in