NDLI: Detection System for Propagating Normal-Zones With Pick-Up Coils in the LHD Helical Coils

Content Provider	IEEE Xplore Digital Library
Author	Imagawa, S. Yanagi, N. Mito, T.
Copyright Year	2002
Abstract	Propagation and recovery of normal zones were observed several times in a pair of helical coils, which are H1 and H2 coils, of the Large Helical Device. In order to detect the position of a propagating normal zone, pick-up coils were installed along the helical coils by the pitch of 30 degree of the poloidal angle. The diameter and turn number of the pick-up coil are 99 mm and 10,000, respectively. They detect the change of magnetic field by current transfer between the superconducting strands and an aluminum stabilizer. The position and the velocity of propagating normal-zones were detected successfully 15 times since the pickup coils had been installed. They were induced 12 times in H1 coil and three times in H2 coil. Most of the normal zones were induced at the bottom of the coils, and all of them propagated to one side, which is the downstream of the transport current, with recovery from the opposite side. The propagation velocity can be estimated from the delay time of the peak voltage of the pickup coils. These obtained data are very useful to investigate the cause of the normal-zone propagation and cryogenic stability of the helical coils. Furthermore, this method is applicable for other superconducting magnets made of asymmetrical conductors.
Sponsorship	Council on Superconductivity Appl. Superconductivity Conference Inc MIT
Starting Page	2316
Ending Page	2319
Page Count	4
File Size	878993
File Format	PDF
ISSN	10518223
Volume Number	21
Issue Number	3
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2011-06-01
Publisher Place	U.S.A.
Access Restriction	One Nation One Subscription (ONOS)
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Aluminum Conductors Superconducting magnets Superconducting coils Current density pick-up coil Aluminum stabilizer helical coil normal-zone propagation
Content Type	Text
Resource Type	Article
Subject	Condensed Matter Physics Electronic, Optical and Magnetic Materials Electrical and Electronic Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Effects of Subcooling on Lengths of Propagating Normal Zones in the LHD Helical Coils

Improvement in Cryogenic Stability of the Model Coil of the LHD Helical Coil by Lowering the Temperature

Reconsideration of Evaluation of Balance Voltages During a Normal Zone Propagation in the LHD Helical Coils

Current diffusion and normal zone propagation inside the aluminum stabilized superconductor of ATLAS model coil

The normal zone propagation in ATLAS B00 model coil

Asymmetrical normal-zone propagation observed in the aluminum-stabilized superconductor for the LHD helical coils

Stability test results on the aluminum stabilized superconductor for the helical coils of LHD

Transient Stability of Large Helical Device Conductor With and Without Aluminum Stabilizer (1)—Experimental Results

Aluminum Stabilized NbTi Conductor Test Coil Design, Fabrication, and Test Results

Detection System for Propagating Normal-Zones With Pick-Up Coils in the LHD Helical Coils

Similar Documents

Effects of Subcooling on Lengths of Propagating Normal Zones in the LHD Helical Coils

Improvement in Cryogenic Stability of the Model Coil of the LHD Helical Coil by Lowering the Temperature

Reconsideration of Evaluation of Balance Voltages During a Normal Zone Propagation in the LHD Helical Coils

Current diffusion and normal zone propagation inside the aluminum stabilized superconductor of ATLAS model coil

The normal zone propagation in ATLAS B00 model coil

Asymmetrical normal-zone propagation observed in the aluminum-stabilized superconductor for the LHD helical coils

Stability test results on the aluminum stabilized superconductor for the helical coils of LHD

Transient Stability of Large Helical Device Conductor With and Without Aluminum Stabilizer (1)—Experimental Results

Aluminum Stabilized NbTi Conductor Test Coil Design, Fabrication, and Test Results

Detection System for Propagating Normal-Zones With Pick-Up Coils in the LHD Helical Coils