NDLI: Theoretical study on characteristics of clipping for different layered structure

Please wait, while we are loading the content...

2011 Second International Conference on Mechanic Automation and Control Engineering

Organizing committees

Table of content

58SiMn metallographic analysis and mechanical properties in the waste heat recovery system

A watermark scheme based on residual

A co-simulation of seam tracking system based on ADAMS and SIMULINK

A cross four-order cumulants based harmonic retrieval TLS-ESPRIT method in the estimation of harmonic parameters

A kind of control method and application of the sluice gate on the Lower Yellow River

A micromechanical damageconstitutive model for solid propellant

A model of maneuverability for a steam-powered vessel

A novel chaotic neural network with Morlet-wavelet activation function

A pilot study of ultrafiltration pretreatment for seawater reverse osmosis desalination in Bohai Bay

A Stewart platform-based 3-axis force sensor for robot fingers

A study on interaction of high pressure gas jet and liquid medium

A Universal Kinesiology modeling of multi-axis CNC machine

Adaptive bit loading algorithm of shortwave broadband OFDM system

Agile product development paradigm based on mass customization

Algorithm research on GPS-based bus-stop auto-announcement system

Almost surely asymptotic stability of neutral stochastic neural networks with multiple time-varying delays

Notice of RetractionAnalysis and optimization of the slide block of YQK-1250 hydraulic machine based on ANSYS

Analysis and research of card ticket's security based on card scraping & vending technology

Analysis and structural improvement of the rubber part in packer in a way of non-linearity finite element

Analysis of the Bertoni-Walfisch propagation model for mobile radio

Analysis on flexibility of industrial welding robots and simulation research

Analysis on managers' behavior choices under the fixed wages form in state-owned enterprise

Anti-synchronization of Liu system and Rössler system with unknown parameters based on adaptive control

Application in Vehicle Routing Problem of hybrid discrete particle swarm optimization

Application of fuzzy and binary algorithm to regulation of load in locomotive load test

Application of Grey Relational Analysis Method in evaluation of bearing design projects

Application of laser welder LW-21-L in hot-dip galvanizing line

Approximation of large time delay for MIMO systems by using matrix Pade-type

Autocorrelation performance improvement of CML Hyperchaos sequence based on APAS theorem

Characteristic recognition of pulse in frequency domain based on probabilistic neural network

Closed-form solution exploration study for general second-order vehicle control system modeling

Notice of RetractionCombustion characteristics of test and research on electronic control fuel injection system of cars GDI engine

Notice of RetractionCrack processing technology and equipment of research

cSPACE-based data-driven control theory application for the linear servo system

Damage detection based-propagation of the longitudinal guided wave in a bimetal composite pipe

Damage identification based on AR coefficients and PCA

Data processing system based on CNC carpentry line trace mill

Decoupling research on a car suspension using principal coordinate of oscillation equations

Delay detached eddy simulation of hydraulic characteristics after a new sudden lateral enlargement and vertical drop at the end of reversion curve of a spillway

Design and analysis on the main frame of Marine Tensioner

Design and evolution of variable topology parallel mechanisms

Design and implementation of high-accuracy FOG-IMU

Notice of RetractionDesign and implementation of the file system

Design and optimization for gating system of bearing base molding

Design and realization of software for a visibility measurement system based on WSN

Design of assembly system for an automobile idle valve

Design of date storage and analysis system for photoelectric encoder based on GUI

Design of ecological material of the ring-plate indexing mechanism based on analytic hierarchy process

Design of photo-electric diameter-measuring device based on FPGA

Design of portable avaition bus adapter based on FPGA

Design of shock simulation system for shipborne weapons based on electrohydraulic servomotor

Design on 10/350µs Crowbar impulse current system

Designing lag observer scheme for unified chaotic systems

Development of an intelligent modeling system for detailed design of steel Industrial plant structures

Notice of RetractionDevelopments trend of new infrared detectors domestic and abroad

Diagnosis method for single fault of aerospace bearings

Disturbance observer enhanced model predictive control with experimental studies

Dynamic analysis of the oscillation system for continues casting mold

Dynamic design and analysis of the new space CCD camera

Dynamic formulation of the 2-DOF parallel platform with actuation redundancy and the designs of the drivers

Dynamic integration oriented data exchange methods for distributed instrument

Dynamic performance research for toroidal motor

Dynamic response test and analysis of a typical aviation pipeline

Notice of RetractionDynamic simulation and optimization design of polished rod hoisting system based on VB combined with matlab and ansys

Dynamics and control of injection molding takeout manipulator

Edge preparation of carbide tools with abrasive brushing method

Effect of yaw velocity feedback in electric power steering system on handling stability of vehicle

Effects of property parameters and blank holding force on the deformability of sheet metal in deep drawing

Electromagnetic field models' building and simulation in workpiece of inductive disassembling of bearing inner race

Enhanced nitrogen and phosphorus removal from urban wastewater in a membrane sequencing batch reactor system

Evaluation of student dormitory's design project based on improved AHP

Experimental analysis of pinhole on electrolytic copper foil and its prevention

Experimental study and numerical simulation of active vibration control on high order mode of piezoelectric flexible beam

Experimental study on the friction and wear performance of new dual friction materials

Experimental study on vehicle speed estimation using accelerometer and wheel speed measurements

Extend UDDI using ontology for automated service composition

Finite element comparative analysis of two doorframe structures in container crane

Flexible method research of combined molding and manufacturing system

Fracture analysis for brake drum of the truck

Freeport communication protocol for S7-200 Programmable Controllers

Game theory-based research on cooperative behavior of group robots

Hardware design of a full-digital AC-servo driver based on TMS320F2812

Hydraulic sheet metal bending machine hydraulic servo valve synchronization systems research

Hydraulic support entire strength research under four kinds of typical load working conditions

Notice of RetractionHydrogen sulfide and carbon dioxide to the gas pipeline corrosion mechanism and protection research

Image processing algorithm of weld seam based on crawling robot By Binocular Vision

Improved fuzzy control for resistance spot welding based on microcontroller

Improved swing frame of mine trunk based on stress and strain analysis and fatigue life

Indentation test of soft tissue for investigating needle tissue machining

Influence of processing parameters of semicircular drawbead on the critical blankholder force for drawing cone part

Notice of RetractionINS/GPS integrated navigation technique for intelligent vehicles

Notice of RetractionInstantaneous velocity test system of automatic mechanism driving component based on virtual instrument

Intelligent sliding-mode control based on cloud model for ship steering

Inverse identification research for dynamic constitutive parameters of thread material based on MSARS algorithm

Investigation of combination characteristic of damage location and intensity in arch using wavelet coefficient

Key technologies of the new concept safety system for vehicle automatic anti-collision

Notice of RetractionLaser CAD/CAM

Loader transmission multi-parameters optimization design based on the satisfactory degree theory

Low-dimensional approximation strategy for a class of nonlinear distributed parameter systems

Magnesium electrolyzer structural optimization based on energy balance

Magnetic field analysis of MSMA single-coil self-sensing actuator

Notice of RetractionMatching research between ZOTYE AUTO and a new generation of Double-CST

Mathematical model and analysis on cycloid planetary gear

Mechanical design and kinematic analysis of a new kind of palletizing robot

Modal analysis of construction hoist based on ANSYS

Modal analysis of transmission gear in gearbox based on SolidWorks

Model to forecast the popularity of electric vehicles

Modeling and analysis on cutting force in high speed milling aeronautic aluminum alloy

Modeling of the feed drive system basing on torsion multi-oscillator

Modeling research of a combined press device for ridge-till and no-till seeders

Modeling the region manufacturing innovation ability with ICA and DEA

Motion model and dredging accuracy of trailing suction hopper dredger

Multi-integral identification based on Feature-Data

Multi-port gear pump design based on virtual prototyping technology

Natural frequency of truss bridge in different support forms

New vertical type reducer with small teeth difference

Nonlinear numerical analysis of high voltage cable terminal rubber stress cone

Numerical comparative analysis of hybrid ventilation system and single fresh air system

Numerical investigation on shock wave interaction in a turbine cascade

Numerical simulation of electromagnetic stirring in purification of polysilicon

Numerical simulation of fluid-solid coupling properties for underwater buoy by taking into account virtual mass

Numerical simulation on air-flow field in the milling chamber of hammer mill

Numerical simulation on the determining technological parameters of vibratory aging treating for large-sized welding box-section beam structures

Numerical simulation research on flow pattern of gas-water two-phase flow in horizontal pipeline

On self-diagnosis technique of wear in auto cylinder-piston system

Open NC system design based on embedded flexible manufacturing system

Notice of RetractionOptimization of hydrogen cooled turbo-generator rotor wedge cooling method

Oracle transaction processing method in MES

Parameters and process of electrochemical machining of blades

Notice of RetractionParametric design research of cam drive mechanism

Performance research of increasing-friction herringbone driving roller based on finite element analysis

Periodic solutions for higher order neutral type delay functional differential equation

Phase-field simulations of non-isothermal binary alloys solidification with Neumann boundary conditions

Power management and energy harvesting for indoor photovoltaic cells system

Prediction of rural electricity consumption based on Grey-Markov model

Predictive functional control simulation of boiler combustion control system

Process prediction model for wood plastic composites pencil boards based on BP neural network

Notice of RetractionProcessing methods of thread of sucker rod joints connection

Remote distributed control and management system for power devices based on GPRS

Research and application on thermal dispatch supporting system

Research and experiment on the drive frequency control of the MEMS gyroscope

Notice of RetractionResearch for fuzzy control system of recoil tension

Research of automobile panel dies deformation based on similitude theory

Research of conceptual design of electromechanical products based on KBE

Research of Continuous Variable Camshaft Timing system based on fuzzy-PID control method

Research of Energy Optimization Dispatching Model in EMS of iron and steel enterprises

Research of game-theoretic approach for aircraft ground deicing operation scheduling

Research of security analysis based on subjective Bayesian Networks

Research on CAD and CAE integration technology in driving axle design system

Research on CAD/CAM technology of high-order elliptical gears

Research on calculation of transport resistance of piping dense paste

Research on COTDR for measuring distributed temperature and strain

Notice of RetractionResearch on embedded fingerprint identification system

Research on feed servo system of CNC Machine based on ControlLogix system

Research on fuzzy random reliability based on wear Prediction model

Research on high speed sprag overrunning clutch

Research on material removal rate of each element of chemical mechanical polishing

Research on new magnetic roller for magnetite preselection with discarding tailings

Research on new method of automobile developing process reengineering

Research on new vibratory energy-recycling hydraulic damping system

Research on precision testing and error compensation for B-axis of turning and milling composite machine tool

Research on signal processing of continuous wave mud pulse

Research on simulation for fracture process of T-type adhesive bonded joint under peel load

Research on speech characteristics based on compressed sensing theory

Research on the dynamic characteristics of the dynamic track stabilizer side searing

Research on the method of testability modeling based on Bayesian Networks

Research on the roller feed track during spinning of hollow part with triangle cross-section

Scientific analysis on the comparison of several physics textbooks

Short-term load forecasting based on wavelet transform and BP neural network

Simulation analysis of new safety impact regulation on cab of commercial vehicle

Simulation and research of reliability enhancement testing about the pulley mechanism

Simulation and test study on particulate materials flow in rotary dryers

Simulation for structure Optimization design on truck rollover test

Simulation on actuating input-combinations of 5-UPS/PRPU Parallel Machine Tool

Stepwise confidence interval method for dose-response and effectiveness studies

Strength finite element analysis of 130t liquid iron tank lifting lug

Strong convergence theorems of relaxed hybrid steepest-descent methods for variational inequalities

Studies on the limiting resistant torque characteristics of the Skewed-Roller Slipping Clutch

Study of active ultrasonic localization in LED street light controller

Notice of RetractionStudy of NURBS-based multi-axis NC milling tool path generation algorithm

Study of the medium-long load forecasting based on the identical dimension addition grey model

Study on 3-D Computer Aided Design for the small bore directed-injection engine combustion system

Study on control system for oblique lane transportation system of coal mine

Study on early forecast and recognition of emergency braking based on FCM and PNN

Study on gear-tooth bending fatigue strength of China-made steel

Study on optimization design of coal filling mining pipeline parameters

Study on Realtime Ahead Detection Technology for mining roadway based on double frequency induced method

Study on the pre-warning system of ecosystem health in mineral area

Study on Thermal conductivity and wear characteristic of basalt coating sprayed by APS

Surface characterization and alternate of related technological parameters for LST

Synchronization and parameter identification of hyperchaotic Lorenz systems

Tensile shear strength of laser welded Ti-6Al-4V lap joints

The detection of active power filter

The algorithm design of wavelet image fusion based on M interest operator on the determined condition

The application of DSP in shunt active power filter

The application of improved Apriori algorithm in continuous Speech Recognition

The application of the fuzzy control algorithm in the automatic track following robot

The calculation of single-phase impedance current on heavily loaded long circuit of double end power

Notice of RetractionThe calculation of uphill belt conveyer catcher

The controlling-study on the sensorless brushless DC motor and its application in a new type automated transmission

The correlation influence factors analysis in the initial dosage of insulin therapy of diabetes

The CST design method of matching both European and American crash regulations

The design and implementation of automated smart car system based on camera

The design and realization of multi-channel parallel testing system based on FPGA

The design of a kind of multivariable nonlinear real-time simulation platform

The design of a Solar-Pull-Push-DC-Power-Supply based on DSP

The design of flight control system for small UAV with static stability

The design of mine air door based on the finite element analysis

The design of pressuring and conveying snow removal machine on multi-span greenhouse roof

Notice of RetractionThe design of testing system based on eddy current technology

The design of the barycenter testing platform

The design on vehicle body panels based on three-dimensional laser scanning technology

The determination of rotational inertia of flywheel for pulsed-load diesel Generator

The effect of electric current on coupling temperature field of stainless steel/copper under friction and wear

The effects of pre-load magnitude on the radial loading performance of pre-loaded cylindrical roller bearings

The exploration of natural gas pressure loss calculation method

The existence of the solution for the nonlinear coupled oscillator networks

The innovative design of product based on component value and lines analysis

The investigation on soft sensor technique of sinter mixture moisture

The measuring of elastic modulus based on ultrasonic

The method of vibration Fault Detection and diagnosis in rotor systems based on Hilbert-Huang Transform

The passenger door system and its control principle on Shenzhen Metro Line 2

The research of speed control system based on intelligent PID controller to mine local ventilator

The safety protection of power dispatching second order system

The singularity research of a novel 2T2R parallel mechanism

The state-owned enterprises operators' behavior analysis based on equity and dual reputation incentives

Notice of RetractionThe study on conveyor belt materials to heat-resistant performance characteristics

The study on electrical control system of machine for supplementing the traditional Chinese medicinal pills based on PLC

The study on self-adaptive predictive arithmetic based on RBF neural network applied in the proportion control of hydrogen and nitrogen in synthesis ammonia production

The study on the Effect of virtual current distribution in an electromagnetic flow meter with bubble

The subdivisions of mesh crack and stress intensity factors about the semi-elliptic surface based on FEM Analysis

The technology and application of voice coil actuator

The way for process decision of generative CAPP

Theoretical model of electromagnetic separation in circular current and experimental study

Topological optimization of the elastic member of dynamometer based on ANSYS

Notice of RetractionTurbocharger turbine shaft critical speed calculation and analysis

Notice of RetractionTurbocharger turbine shaft seal structure and analysis

Notice of RetractionUrban road traffic status evaluation analysis based on AHP

Notice of RetractionVirtual green manufacturing and its application in manufacturing

Virtual prototype design and experimental study on a patented double-ring-plate gear reducer

Warpage simulation and optimization for the shell of color liquid crystal display monitor based on Moldflow

Waterplant remote control system of combining Data Transceivers and GPRS

Wavelet analysis of pressure fluctuation in gas-solid two-phase flow in a horizontal pipe

Wleding head control analysis based on the root locus method

A design of mixed-signal test controller based on boundary scan

A DNA genetic algorithm with reconstruct operator for chemical process modeling

A fast transient load current regulator

A hybrid based GA and HS algorithms in blocking flow shop scheduling problems

A new target tracking and positioning method for grayscale images

A novel digital sphygmomanometer using Cortex-M3 microcontroller

A novel beam model based on ultra-sparse arbitrary spatial array

A novel design for the receiver of SAW reader

A novel multi-strategy cognitive routing

A precision carbon fiber hexapod for the installation of an optical telescope

Notice of RetractionA pressure sensor based on PVDF films for human

A project variable metric algorithm for solving electromagnetic inverse problems

A quantificational study on the radial velocity of fluid in Hydrocyclone

A SIFT descriptor with local kernel color histograms

A smoke detection algorithm of energy difference between frames based on adaptive LOG operator on the infrared video processing

A study on arc tube of ceramic metal halide lamp based on finite element analysis

A water-level controller for greenhouse sump tank

A wavelet packet analysis based method for fault diagnosis of dynamic circuits

ABS control design for two-wheel drive electric vehicles

An aerodynamic study of aspirated and unaspirated consonants in Mongolian

An avoiding obstacle algorithm of mobile robot under complex unknown environments

Notice of RetractionAn improved securities network traffic management scheme

Analysis and evaluation to park green spaces status of Wuhan main city in China

Analysis and study of the crushing mechanism of the MPS vertical roller mill

Analysis of driving capacity on traveling wave pump of magnetic fluid

Analysis of inhomogeneously filled cavities by vector finite element method

Notice of RetractionAnalysis of thread rolling die and its application on automatical screwmachine

Analysis on crankshaft of 12V190 engine using 3-D FEA method

Analysis on hydrodynamic characteristic and cavity form of high-speed projectile with small angle of attack

Analysis on the static property of BZZ5 full hydraulic steering device

Analysis on vibrator of vibrating compactor based on ANSYS

Analytical method for steady temperature and thermal stresses of a FGM hollow cylinder with temperature-dependent material properties

Anti-tilting technology of online measurement for large-size optical lens

Application of Dijkstra algorithm in robot path-planning

Application of improved ant colony algorithm in load distribution optimization of tandem cold rolling

Approximate formula of the lowest-order TM mode of a pentagonal waveguide family

Automatic locked control system of vehicle drunken driving based on PIC16F877A

Notice of RetractionBased on the application of the KBE technique of UG-NX4 platform in the design of the panel dies of the automobiles

Boundary absorbing computations in wave simulation with the finite element method

Centralized control system of nodes based on wireless sensor network

CFD simulation of separation of two-phase flows systems

Chemical evolution of mesons in hadronic matter

Chip ignition in research on high-speed face milling AM50A magnesium alloy

Notice of RetractionCloud computing based on internet of things

Comparison of the test and measurement system with the automatic control system

Composition-dependent properties of MgxZn1−xO films by sputtering

Computation of the simplest normal form for the singularity of two non-semisimple double zero eigenvalues

Control system software design of injection molding machine based on neural network

Crashworthiness design optimization of S-rail

Data processing of on-machine measuring in fine grinding for optical lens

Densification of graphite/copper compound powders

Derivation of analytical calculation of area mobility of a thin plate under a uniform velocity excitation

Design 6-DOF fatigue life test system for vehicle driver seat

Design and Development of a pluggable PEMFC extended Range Electric Vehicle

Design and implement of 3D chemical pipes

Notice of RetractionDesign and implementation for CMMB frame-head and control information demultiplex error handing based on finite automaton

Design and optimization of automatic machine for almond opening

Design and realization of CAN bus vehicle instrument cluster based on μ C/OS-II

Notice of RetractionDesign and research on support plate torsion spring of special electromechanical device

Design of 3201Z-type Dump Truck's lifting mechanism

Design of an axially telescoping wing control system based on servo motor

Design of an experimental system for cryogenic compact exchanger

Design of anti-lock braking system for electric vehicles via short-circuit braking

Design of automatic cage door based on endless rope

Design of automatic hydraulic test bench based on LabVIEW

Design of electric drive system with SRM and its fuzzy controller for armored vehicles

Design of fuzzy-CMAC neural-network complex controller for gas mixing process

Design of high-speed Boundary-scan master controller base on SOPC

Design of multi-channel high-precision data acquisition system based on AD574A

Design of new-type electric control system based on power panel and PCC for boom-type roadheader

Design on torsion test-bed of automobile drive shaft

Designing and tuning current loop on AC servo system base on PMSM

Determination of the maximum power generation of renewable energy generating units in an islanded microgrid

Developing of data recorder of using USB flash disk as storage media

Development and trend of high-speed hydrodynamic and hydrostatic hybrid spindle unit

Development of 2YAC2460 super-heavy vibrating screen

Development of hybrid power train system for hybrid electric vehicle

Development of multi-axis stepper motion control system based on nios II

DFT accurate amplitude, phase and frequency analysis method

Direct torque control of permanent magnet synchronous motor based on second order sliding mode

Distributed kernel Fisher discriminant analysis for radar image recognition

Dynamic analysis of doubly fed induction generator during symmetrical voltage swells

Dynamic analysis of load sense steering hydraulic system priority valve

Dynamic response of low truss bridges subject to lateral loads

Dynamic simulation of rocket launch system based on virtual prototype technology

Dynamical analysis of a generalized Camassa-Holm equation

Dynamically reconfigurable modular design of a new type of mobile manipulator joint system

Dynamics simulation of floating automatic rifle

Dynamics simulation of high speed slot-puncher indexing system

Dynamics study on stable operations of central pin assembly of the dynamics stability vehicles

Effect of multi-pass hot rolling process on the microstructure of steel 2.25Cr1MoNb

Electromagnetic analysis of a novel Lorentz-force-driven planar motor via 3D FEM calculation and experimental verification

Electronic control system design and test of pure electric vehicle battery management system

Equilibrium between spontaneous polarization, piezoelectric polarization and crystal defects for blue LEDs on sapphire substrate

Error sensibility analysis of 3-UPU parallel manipulator based on probability distribution

Establishment of buffer dynamic model for polyethylene foam cushion

Experiment investigation on dynamic performance of tool system and influential factors

Experimental study of magneto-acousto-electrical tomography

Experimental study on the five sort algorithms

Extraction on polysaccharide of Camellia Cake by response surface methodolog

Fault diagnosis of fuel oil system for diesel engines based on wavelet neutral network

Finite element simulation system for hot rolled H-beam in finish rolling process

Flow visualization and measurement in flow field of a torque converter

Gear fault diagnosis of wind turbine generator system based on lifting wavelet- zooming envelope analysis

Generalized function projective synchronization and tracking control of a class of hyperchaotic systems with unknown parameters and disturbance

Global dynamics of a functionally graded material rectangular plate

H.264-based video network server design

Helical-via-type mushroom EBG structure for size reduction

Hybrid power supply of rescue robot based on supercapacitors

Improved generalized predictive control in polymerization process

Influence of temperatures on the mechanical properties of AZ91D Mg alloy processed by ECAP

Information scheduling optimization algorithm based on FlexRay

Inner boundary conditions of mindlin plate with a finite-length part-through crack

Iterative learning control of nonlinear marine course system

Kinematics analysis and simulation of a new 3 degrees of freedom spatial robot mechanism composed by closed chain

Levitation fluctuation constraint strategy in bearingless motor based on disturbance acceleration observation

Measurement and repair of structural body damage to cars in collisions

Measuring and calibrating flow rate of primary air for medium speed mills by numerical simulation

Mechanical forces and magnetic field simulation of transformer with finite element method

MIMO radar 2-D real-time imaging algorithm and simulation

Miniaturization coaxial cavity filter design used in 3G communication

Minimizing assembly variation in selective assembly for complex assemblies using genetic algorithm

Modeling simulation and kinematic analysis based on Pro/Engineer for jaw crusher mechanism

Motion analysis of conjugate side about opposed biconical cone screw high-pressure seawater hydraulic pump

Notice of RetractionMultiobjective evolutionary algorithms applied to compressor stations network optimization scheduling control system

Multisensor information fusion algorithm and application combining D-S evidence theory and BP neural network

New stopping criteria for turbo decoder

Nonharmonic system with greedy algorithm

Nonlinear dynamics modeling of axially moving cantilever laminated composite plates

Nonlinear numerical simulation of roll-over protective structure of cabs in underground engineering services vehicles

Nonlinear vibrations of the blade with varying rotating speed

Novel iterative detection of MC-CDMA with two sets of orthogonal spreading sequences

Novel large negative dispersion photonic crystal fiber for dispersion compensation

Numerical simulation on the heating process of regenerative heating furnace affected by buoyancy force

On ADRC for photoelectrical stabilized platform

On-line prediction of surface roughness in cylindrical traverse grinding based on BP+GA algorithm

Optimal medical management of enterprise information resources

Optimization model of equipment maintenance

Performance of anti-rutting agent modified asphalt mixture in northwest regions

Power flow analysis of a grid-connected high-voltage microgrid with various distributed resources

Prediction at China's coal production quality based on VEC model early “12 5”

Prediction of critical cutting conditions of adiabatic shear of Ti6Al4V in high speed cutting

Preparation and thermal shock properties of Si3N4-WC nanocomposites

Prototype development of AN 8mm-band two dimensional interferometric synthetic aperture radiometer

Rapid and accurate alignment method for SINS on stationary base aided by double-antenna GPS

Research about intake and exhaust mulffer: A review

Research and design of vacuum system for A 10MeV cyclotron

Research and development for brake test-bed based on electrical inertia simulation

Research for cylindricity prediction model of inner-hole honing

Notice of RetractionResearch of detection of a crack on pressure vessel based on both of acoustic emission diagnosis and ultrasonic testing

Notice of RetractionResearch of impact test method based on tri-component force

Research of notch fatigue crack initiation cycles for 10 steel

Research of variable frequency control technology for heavy adjustor in power plant fuel system

Research on application of data mining based on FP-growth algorithm for digital library

Research on control system of new type ceramic polishing machine

Research on defining equipment support unit based on fuzzy clustering analysis

Research on esplanade-cleaning robot's target recognition

Research on fractal trait of surface topography of tangential turn-milling

Research on indirect lighting protection for military power supply

Research on machining precision of CNC spiral bevel gear grinding machine

Research on modeling of contour error for motion control system of CNC machine

Research on piezoelectric transducer application in micro hole vibration drilling

Research on self-sensing technique of giant magnetostrictive actuator for seawater hydraulic servo valve

Research on static clustering for wireless sensor networks

Research on the application of extension rule on fault diagnosis expert system inference engine

Research on the data checking of digital definition of mechanical products

Research on the influence of rainfall on millimeter wave Doppler fuze

Research on the thermal simulation experiment of AZ80A magnesium alloy

Retrospect and prospect to the research on faults diagnosis of rotating machinery in noninertial reference frames

Rigid method for dispersion relation of plasma antenna

Same pressure of two-point clamping device based on permanent force increasing lever - symmetrical toggle mechanism driven by pneumatic muscle

Self-learning control for gear position of automotive AMT

Simulation and test study on rotary dryers

Simulation of digital hydraulic controllable pitch propeller based on virtual prototype

Simulation on performance of rubber isolator based on ANSYS

Simulation planning of robot welding line

Simulation research of laminated solid armature based on orthogonal experimental method

Simulation research on the multi-way valve of outlet pressure compensation in crane hydraulic system

Stress analysis and optimal design of titanium sponge crusher rotating blade

Stress analysis of main spindle for permanent drum magnetic separation based on COSMOS

Structural correlations between liquid and solid Ag70Au30 alloy

Structure design and fabrication of a bistable microvalve

Study of blend films from methacryloyl guar gum and sodium alginate

Study of buck-boost photovoltaic inverter based on discrete sliding mode control strategy

Study of high-power and high-energy laser fiber coupler

Notice of RetractionStudy of Network Planning, optimization for WLAN

Study on Bluetooth technology and its access to BACnet

Study on dynamic optimum design of tower crane structure

Study on electromagnetic detection transmitter system

Study on experiment of vertical impact damping system

Study on friction compensation for gun control system of tank based on ADRC

Study on grinding force of grind-hardening based on orthogonal experimental method

Study on oxidation and dissolution of tungsten carbide in water

Study on remote PLC experiment system based on web

Study on simulation of extended-circular flights of rotary dryers

Study on the application of fuzzy-PID control to precision seeding technology of wheat

Study on the motion control system of a novel 3-DOF PKM module based on Turbo PMAC

Study on the new joining technology of aluminum alloy / Q235 steel dissimilar metal by the longitudinal electromagnetic hybrid TIG welding-brazing method

Study on the position of space manipulator's locked points

Study on wettability and corrosivity of a new no-clean flux for lead-free solder paste in electronic packaging technology

Survey of signal processing methods and research on vibrating screen fault diagnosis

Teaching of Engineering Drawing in the 21st century

Temperature and thermal stress analytical models of metal materials in heat treating

Test analysis of metallic material's elasto-plastic properties and macroscopic fracture criterion

The application of Improved Quantum Genetic Algorithm to beam forming of adaptive array of smart antennas

The application of Wavelet Transform in the processing of low frequency distortion of pyrotechnic shock signal

The calculation of shaping curve for step with minor width in Cross Wedge Rolling

The cost control of communication construction projects: Case study of Zhejiang Post and Telecommunication Construction Corporation

The crosscut production line control system based on PROFIBUS-DP Bus

The design and implement of micro autopilot system for low-altitude mapping of MAV

The design and implementation of intelligent campus security tracking system based on RFID and ZigBee

The design of multi-channel data acquisition system based on virtual instrument technology

Notice of RetractionThe design of traffic lights fuzzy controller based on PLC

Notice of RetractionThe discussion about ether and the ⋀ term in the Einstein gravitational filed equation

The experimental research and numerical simulation on flow across bluff body in vertical upward gas-liquid two-phase flow with low liquid volume fraction

The influence of nitrogen pressure on the microstructure and mechanical properties of TiSiN coatings by cathodic arc ion-plating

The ISMVSC system for PMSM based on DSP

The monitoring system of leakage accidents in crude oil pipeline based on ZigBee technology

The network nodes design of gas wireless sensor monitor

The nonlinear compensation of output frequency of the I/F converter

The prediction of SOC based on multiple dimensioned Support Vector Machine

The research and application for improving the coarse pitch numerical control program

The research for the stationkeeping system and the mooring system for deep-water drilling device

The research of insulation failure on signals transmission in electrical connector

The research of stability performance of 4WD vehicles basing on electric wheels torque control

Notice of RetractionThe research on HEV Ni-MH battery discharge model

The research on the new boiler water level automatic control system

The simulation of four non-isolated DC boost circuits

The strong-coupling bound magnetopolaron in a quantum well

The study and simulation of Clutch control strategy in starting process

The study on hot test and thermal stress and distortion of cast copper staves with buried copper pipe

The study on modal analysis theory and measurement method for transmission towers

Thermal properties and degradation of Phenolic Resin/Zn composite films

Time-varying reliability design of non-road heavy vehicles key part

Notice of RetractionTire pressure monitoring system

Topology optimization design for two- material micro compliant mechanism with stress constraint

Traffic flow detection method based on fusion of frames differencing and background differencing

VDT: A data integration model for web applications

Vector-matrix analysis method for designing disk-shaped milling-tool outlines in forming helical surfaces

Notice of RetractionWater conservancy monitoring system based on wireless sensor network

Waveform inversion of crosshole data based on acoustic wave equation

Wavelet Neural Network based fault detection method in power system

Wear mechanism of the rollers of MPS vertical roller mill

Wind turbine condition monitoring and reliability analysis by SCADA information

Wire extension with Dual freedom PID control in pulsed MIG welding process of aluminum alloy

A case of hotel reclaimed water treatment project

A comparative study of statistical learning methods to predict eutriphication tendency in a reservoir, northeast China

Notice of RetractionA micro-grid reactive voltage collaborative control system configuring DSTATCOM

A modelling and simulating tool for activated sludge system

A non-linear rheological model for typical soft clay in Tianjin coastal areas

A organization method study on increasing the cargo capacity of the railways of harbor

A research of similarity design of collision guardrails under the overpass

A study on comparison of atmospheric temperature profiles

Advanced treatment of molasses alcohol wastewater using Fenton-like reagent

Airflow through crushed-rock layers

An analysis of carbon emission intensity influenced by regional structure in China

An analysis of the dispersive features of Galerkin meshfree formulation for shear deformable beam

Notice of RetractionAn estimation of urban ecosystem health under mode of recycling economy

Analysis and evaluation of soil heavy metals in the southern suburbs of Jiaozuo

Analysis and mitigation of progressive collapse for steel truss girders

Analysis of cable curve and determination of finished state of self-anchored suspension bridge

Notice of RetractionAnalysis of comparing between Tokyo and Paris urban planning

Analysis of formation conditions of collapses in the Himalaya region

Analysis of segmental cave-in Probability of Maojingba tunnel in Daqing-Guangzhou Expressway

Notice of RetractionAnalysis of Small box profiled lightweight reinforced concrete wall structure

Analysis of the effect of tunnel construction on frame structure buildings in Xiamen Airport Road

Analysis of thermal stresses of concrete small hollow block

Analysis on reservoir desilting by spiral flow

Analysis on river regime of the North Branch in the Changjiang River estuary

Analytical solution of the roof safe thickness of the mined-out areas under dynamic loading

Analyzing sustainable development model of Wuhan“1+8” city cluster area from some complex scientific management views

Application of ANSYS/PDS in reliability analysis of Formation-Cement-Casing

Application of Attribute Recognition Theoretical Model on Dam Severity Evaluation

Application of fuzzy analytic hierarchy process in the selection of highway route program

Application research on construction technology of spin dig cast-in-place pile based on the spin dry homework

Application study on the solar energy heating system in Luoyang

Assessment of the load-carrying capacity of the concrete pier subjected to the freeze-thaw cycles

BAF using large-size lightweight ceramic filter media for pretreatment of micro-polluted raw water

Bus vehicle status analysis in China

Calculation of human body respiration and metabolic heat and moisture in Mine Refuge Chamber

Characteristic and Metabolic pathways of 2,6-Di-tert-butylphenol degradation by Alcaligenes F-3-4

Characteristics of coalbed methane isothermal adsorption and its controlling on productivity

Characterizing changes in surface ozone levels at an urban site in Xi'an, China

Chemical characteristics and sources of precipitation around Qinghai Lake valley, NW China

Chinese Ancient Ruler Research

Civic architecture energy-saving design principles and strategies

Combination prediction model and dynamic analysis of arable land pressure in Shandong

Combustion of industrial gas in porous media burner

Comparison of the inhalable particles transportation in the kitchen in different seasons

Concerning with standby power consumption and creating low carbon life —Trailing and studying the standby power consumption of office equipment in Kunming

Conductivity and mechanical properties study of steel fiber reinforced graphite conductive concrete

Construction and application of water flow chart in steel rolling process

Construction risk management through insurance and bonding in China

Deep defects analysis and treatment of in-situ bored pile based on grouting technique

Design of information management system for regional cleaner production based on B/S structure

Design of vibro-replacement stone column for foundation of multipurpose utility tunnels in Dalian

Development of EMI shielding materials characterized by low secondary electromagnetic radiation pollution

Discussion of coal mine development prospects of low-carbon economy

Distribution and relationships of phosphorus fractions in sediments of middle-lower reach of East Tiaoxi River

Drag estimation of single tetrahedron block in multi-direction flow surroundings

Dynamic analyses for plates on half space by point-radiate infinite element

Dynamic method of embedded large cylindrical structures considering plastic strain of soft soil

Dynamic optimization design of valve train in internal combustion engine

Earth slope safety factor enhance with zoology protective technologies

Earthquake resistance present situation and suggestion of the rural buildings

Effect of alfalfa(Lolium multiflorum L)on degradation of trichlorophenol in soil

Effect of CaO additive on formation of PM2.5 under O2/CO2 atmosphere during coal combustion

Effect of organic acid on heavy metals removal from sewage sludge

Effects of ambient conditions on the impedance-based health monitoring technique

Effects of bisphenol a on dissolved organic matter fluorescence characteristics using parallel factor analysis (PARAFAC) modeling

Effects of defoliation on the growth plasticity in stolon of centipedegrass

Effects of grazing intensity on the small-scale pattern in a Dactylis glomerata-Trifolium sward

Effects of soil condition on stolon growth of centipedegrass

Effects of soil condition on the population dynamics of rhizome on Aneurolepidum chinense

Electromagnetic navigation system design of the green house spraying robot

Emulational simulation of valve train based on rigid-flexible coupling model

Evaluation of steel truss construction scheme based on Vague sets

Notice of RetractionEvolution of the Judian lake wetland on the seaboard of Shouguang County, China

Experimental of vertical casing soil-air heat exchanger

Experimental studies on a CCHP system based on a micro-turbine

Experimental study on cyclone separator

Experimental study on cooling characteristics of a radiant floor cooling system in Beijing

Factorial decomposition of GHGs emissions of Taiwan electricity production

Finite element analysis and strength calculation of steel-plate silo

Notice of RetractionFinite element analysis of reinforced concrete beams strengthened with prestressed CFRP sheets

Finite element model updating for space truss structure by fuzzy pattern identification

Formation of soluble microbial products (SMP) in an anaerobic sludge system

Formulation of river health index and its application to the upper reach of minjiang river

Full-scale test study on DX piles and post grouting bored piles

Geotechnical stability simulation of single bucket offshore platform under vertical cyclic loading

Guidelines for synergetic utilization of Chinese agricultural land based on the emergy balance law

Health diagnosis for the Yellow River delta wetland, China

Heat transfer analysis of uniform annular fin on regular perturbation method

Impact analysis on pedestrian traffic flow in weave area of building

Impact of global climatic change on runoff in the upper reaches of the Yellow River

Impact of human activities and climatic change on surface runoff in Hebei Province

Impacts of seawater desalination on environment

Influence of explosion parameters on energy distribution of blast vibration signals with wavelet packet analysis

Influence of free chlorine on nitrite accumulation in biological aerated filter(BAF)

Influence of homogeneity of rock material on rockburst based on numerical analysis

Influence of hydraulic turbine operation modes on the hydraulic vibration of pressurized conveyance system in hydropower station

Influence of matrix suction on engineering properties of unsaturated soil

In-situ thermal response test of the ground thermal properties for a ground source heat pump project located in the Inner Mongolia district

Instability analysis of fluid and elastic panel system based on the differential quadrature method

Interface stress distribution law of SMW method section steel-cemented soil

Interfacial debonding stress in cracked RC beams strengthened with CFRP

Internet-based platform for power system simulating and planning

Investigation and analysis of existing building use and maintenance

Kinetic study of the isomerization for endotetrahydrodicyclopentadiene over AlCl3 catalyst

Law and prediction model of smoke backflow distances under fire of railway tunnel

Life cycle assessment of recycled aggregate concrete containing fly ash

Local analysis of the anchorage zone between the suspenders and the deck of large span basket handle through tied arch bridge

Macro-monitoring and evaluation of mining ecosystem based on HJ satellite — Taking Shenfudongsheng mining as an example

Measures of introduction and look forward to prevent breeze vibration of overhead power transmission lines

Modal analysis and experimental study on round-ended CFST coupled column cable stayed bridge

Modelling on multiyear lag of Ejina Oasis vegetation behind Heihe river's runoff

Modification on terzaghi's one-dimensional consolidation equation with the consideration of viscoelastic soile

Multi-points synchronous measurement of pressure used in burst and leakage monitoring along the water transmission pipeline

Numerical investigation of gangue waste heat recovery and utilization in tunnel kiln

Numerical investigation of the oscillatory free surface profiles of overfalls

Numerical simulating for non-stationary combustion in the ring porous medium burner

Numerical simulation of a new set of fully nonlinear Boussinesq wave equations

Numerical simulation of impact of the upstream discharge on salinity at Qingcaosha reservoir

Numerical study of the effect of air outlet opening on natural ventilation in a workshop

Optimization design of C-post wire rope safety barrier

Optimization of the level of SS crash barrier Overpass Bridge on highway

Optimizing of operation parameters in EDI process by orthogonal test method

Parameter estimation of the pyrolysis model for fir based on particle swarm algorithm

Performance of anaerobic sequencing batch reactor (ASBR) for domestic wastewater treatment in low temperature

Persulfate oxidation activated by peroxide with and without iron for remediation of soil contaminated by heavy fuel oil

Phosphate removal from water by zero-valent iron / activated carbon fiber felt galvanic couples

Phytoplankton assemblage variation in relation to environmental parameters at two river reaches in Chongming Island

Prediction of the coal gas distribution with GIS-FUZZY

Preparation and characterization of polysaccharide/ protein biodegradable membrane

Pretreatment experiments for photographic waste water

Prevention and control of debris flow in the small watershed based on ecological landscape remediation: a case study of the Tianchi Lake Nature Reserve in Xinjiang, China

Principle of work analysis and experimental research of magnetic separation column

Progress of research on the dilatancy mechanism of soil and the constitutive model for dilatancy of sandy soil

Properties of the fully weathered gravelly sandstone as filling material

Protect environment and explore a new sustainable socio economic development road under the guidance of scientific outlook on development

Rainfall infiltration-derived submarine groundwater discharge from coastal multi-layered aquifer system

Rainfall-runoff forecast method based on GIS

Rapid reproduction technology system of Rhododendron dauricum — Selection of medium and explant

Rare earth elements stratigraphic significance in Late Permian mudstones from Mount Huaying, Sichuan Province, China

Real-time simulation platform for inland ship maneuvering

Reflective cracking dynamic response of asphalt concrete under vehicle loading

Reliability evaluation of ground source heat pump in interval parameters of stochastic model

Removal of mixed volatile organic compounds using bipolar pulsed DBD

Research and application on ground prevention technique of saturated silt sandy soil

Research and application on meshless method of radial basis functions

Research development of antibiotic pollution and toxicity in soil

Research development of treatment and repairing technology of polluted river

Research of mechanical property of pre-twisted rectangular beam

Notice of RetractionResearch of treatment of wastewater containing copper using new modified ceramic filter media

Research on agricultural product international competitiveness of Northeast China

Research on Carbon Problems in the construction industry

Research on dry permanent magnetic separator of fine coal

Research on effect of CaO/SiO2 on recovery iron from converter slag under smelting condition

Research on fault polygon extraction and smoothing method

Research on hydrophilicity and hydrophobicity of adsorption of NOM on metal oxide/ water interface in different pH values

Research on improvement of the sludge odor by using HAS soil stabilizer and mechanism

Research on method of calculating the bearing capacity of timber columns repaired and strengthened by BFRPS

Notice of RetractionResearch on natural design seismic wave in Yinchuan

Notice of RetractionResearch on security measures under overpass bridge

Research on the approaches of low-carbonization of residential building based on whole life cycle theory

Research on the design method of conceptual detailed planning

Research on the impact Of intermittent aeration ways on short-cut nitrification

Research on the influence of regional tectonic stress field on coal and gas outburst

Research on the interaction of rock-mass with multiple cracks under seepage pressure

Notice of RetractionResearch on the mechanism of sustainable growth based on dynamic core competence

Notice of RetractionResearch on the setting of vertical clearance under the overpass bridge

Research progress of a GIS-based DRASTIC model

Researches on mining rock failure process and gas flow with upper protective layer extraction

Review of ecological water demand in water areas

Rick structure to resist earthquakes & consumption of energy to study

Risk analysis and emergency measures for shallow tunnel construction embedded in watery and arenaceous stratum

Seismic response analysis of CFRP retrofitted RC columns

Shaking table test of a mega steel structure

Shallow reinforcement effect of plant roots on construction stability of shallow tunnel

Simplified seismic design and analysis of structures with nonlinear fluid viscous dampers

Simulation of flow around open storage pile based on low Reynolds number turbulence model

Simulation of pressure effect on water in the cathode for the PEM fuel cell

Simultaneous decolorization and degradation of azo dye with electricity generation in microbial fuel cells

Some issues in research on block preconditioning for coupled Biot's linear system

Strengthening the construction and protection of ecological environment and maintaining the social stability and environmental security

Study of micro-structure of asphalt mixture based on fractal theory

Study of traffic flow detection method based on Nearness Degree Data Fusion Technology

Study on artificial soil rapid infiltration system for treating restaurant wastewater

Study on parameter vibration of stay cable and resistance measure in consideration of bridge deck vibration

Study on propagation laws of blasting vibration in deep roadway

Study on rheology property of muddy clay

Study on stability of geogrids-reinforced high embankment

Study on stress and deformation of support pillar of vacuum flat glazing

Notice of RetractionStudy on technology of prevention outburst with uncovering coal rapidly in Cross-cut in severe Outburst Coal seam

Study on the CO concentration upper limit in highway tunnel

Study on the effect of hydrolysis acidification for divisional influent ABR

Study on the hydraulic impedance of surge tank

Study on the interaction of a single pile and pile groups with the soil in layered foundation

Study on the mathematical model and primary frequency regulation characteristics of combined cycle plants

Study on the numerical simulation research of uranium and strontium's dynamic migration on the soil

Study on the recycle of rare-earth in rare-earth leaching wastewater

Study on variation rules between heavy metal ions' concentration and pH value in acid mine drainage

Notice of RetractionStudy on V-I characteristic of carbon fiber

Sulfur balance in the treatment of sulfur-containing wastewater in a biotrickling reactor

Supply chain coordination of construction management based on multi-agent

Notice of RetractionTechnical exploration of the outburst prevention and the rock burst of working face at coal mine with deep shaft

Tests of ionic soil stabilizer reinforcing expansive soil

The application of fuzzy comprehensive evaluation method in factory site scheme selection of thermo-electricity project

The application of gas chimney volume forecast technique on shallow natural gas and natural gas hydrate of the engineering geological disaster in the region of LW21-1-1 well

The application of Ground Penetrating Radar in advanced prediction of tunnel

The application of Improved Back Propagation Neural Network on the determination of river longitudinal dispersion coefficient

The benefit models of new energy vehicles on industry value chain

The city bus driving cycle construction

The critical technics of construction of group piles foundation of Sutong Bridge

The design principles and control measures of preventing the cracks in the exterior wall insulation

The ecosystem service values of a farmland ecosystem with straw recycling

The effect of alkali-saline stress on the growth of rhizome of Aneurolepidium chinense

The environment control of the coal mining collapse

The Ermi landslide mechanism analysis

Notice of RetractionThe growth risk identification method of small and medium real estate brokerage business

The impacts of drainage and reclamation on wetlands water resources in the Sanjiang plain, China

The inversion of the coefficient of permeability with genetic algorithm

The judgment of the degree of rural financial deepening in Jilin Province and the measures

The mechanism and parameters ascertainment of ground stabilization in the project of pipe jacking construction traversing pile laterally

The optimization study of the pile spacing for the transmission tower foundation considering soil-pile interaction

Notice of RetractionThe practice and application of temperature control technology of massive concrete in large-scale cushion cap

The research of natural environment capacity under Henan industrialization and urbanization

The research on investment control of large-scale project in karst area of Guangxi

Notice of RetractionThe roadside clear zone distance research

The speciation of phosphorus in the sand particles in Western Inner Mongolia

The study of driver's starting intentions

The study of ship's Oil spill risk management

The study on the development tendency of the Chinese road traffic safety management

The synthesis and characterization of glycine-lead

The tactics of architecture education under the contemporary cultural environment

The technical research of heat insulation and controlling of the temperature with the biogas digesters in the severe cold regions in winter

The technologic study in tension-reducing steel tube

The temperature adaptability of solar greenhouse vegetable in winter in Guanzhong and Northern Shaanxi

The theory on seasonal frozen soil's moisture migration and frost heave in Hetao Irrigation District

Notice of RetractionTheory and experimental study on soft rock roadway blasting destressing in deep mine

Total optimization design: A method of design and optimization for direct drive systems

Trampling effects on the stolon growth of centipedegrass

UAV aerotriangulation with flight-control data support

Unsaturated soil seepage analysis using temporal adaptive transformation method with under-relaxation

Use Triton X100 as additive for mesoporous carbon counter electrode to improve the photoelectric properties of dye-sensitized solar cells

Water environment evaluation based on fuzzy comprehensive method

Water relations of four perennial plant species at the southern periphery of the Taklimakan desert

A framework of early warning and emergency systems for highway natural disasters

A highly effective ASP flooding system

A modal analysis of bucket foundation breakwater based on the Lanczos method

A new criterion for evaluating stability of slope in strength reduction FEM Based on plastic dissipation energy

A non-uniform beam element considering shear deformation

A simplified method for vertical bearing capacity of bucket foundation breakwater under wave load

A structured model for natural soft clay

A study of driving cycles synthesis methodology based on the wireless remote data collection1

A study of using Fenton-like to enhance mass transfer during deep oxidative desulfurization

A study on Relaxation Camp Facility Management

A systematic study of comprehensive work plan establishment to the large-scale construction project

Adsorption characteristics of phenanthrene — A typical petroleum hydrocarbon on the aquifer media

Analizing the effect of high-speed railway on urban and regional development

Analyse on the characteristic of cooling load in light weight PCM building

Analyses of construction promotion differentiation of grid structure for Swimming and Diving Hall in Qingdao Sports Center

Analysis and optimization strategy on sunlight environment of residential area in Harbin

Analysis of Influence factors for Weigh-in-motion

Analysis of mechanism of semi-circular transverse cracks in light double column bridge piers

Analysis of the ground deformation to large cross- section tunnel by Pipe-roof Pre-construction Method

Analysis of the problems and causes in defining soil and water loss control responsibility areas of development projects

Analysis of the reputation effects of construction corporations based on reputation effects model in agent market

Analysis of vertically freezing reinforcement for shield launching and accessing on load-structure model

Analysis on surrounding rock stress in highway tunnel construction

Analysis to heat loss of steam pipeline network in economic development zone

Analyze the montanic pipeline construction bend and elbow measurement

Anoxic/aerobic biological aerated filter for treatment of domestic sewage

Application of excel in hydrologic frequency computation

Application of fuzzy comprehensive assessment in reservoir resettlement post evaluation

Application of hinged connection handle in concrete structures of high-rise building

Application of pinch technology for energy conservation in pharmaceutical factory

Application of the BP network evaluation method in desulfurization technology selection of thermo-electricity project

Application of thermal vapor compression to waste heat recovery systems and its efficiency evaluation

Application research of urban traffic pattern decision-making to the medium-sized & small cities in Anhui province based on fuzzy clustering method

Applications of underwater laser welding in nuclear power plant maintenance

Applied research of bolt-inject support technology in deep coal mine extremely unstable coal roadway

Approach to the variation of dry density and improvement depth of loess under dynamic consolidation when high embankment is filled

Aproximate solution of seismic bearing capacity of composite foundation under earthquake action

Assessment on the value of ecosystem service of important protected area for water supply of city

Biofiltration of waste gas containing sulfide hydrogen and toluene

Blasting and controlling technique of danger rock mass at Wuzhaoguan on Yichang-Wanzhou Railway

Calculation of cross-section average flow velocity in vegetated compound channels

Carrying capacity of “embodied energy spot” on Urban square by the pulsing control mechanism

Centrifuge modeling test of dynamic response and deformation law of concrete-faced rockfill dam under different input waves

Characteristics of the destroyed masonry structures in Wenchuan Earthquake and its numeric simulation

Chemical characterization of quaternary groundwater in southern Laizhou Bay

CO2 emission reduction through crucial industrial by-product exchange in an industrial area

Coal seam hard roof deep hole blasting relief technology and optimization

Comparative research on the vibration response between scale-model test and numerical analysis for highway bridge-vehicle coupled

Comparative study of cooling tower performance evaluation indicators

Comprehensive evaluation on water environmental carrying capacity of Qiantang River watershed based on index system

Computational experiment system architecture of extreme flood and drought disaster events

Computer simulation for stress distribution of prestressed cables

Construction technology and application of curve pushing accumulating sliding in large-span spatial steel structure

Deformation properties of diaphragm wall due to deep foundation pit of subway station in Ningbo soft soil

Design of low cost low power home independent photovoltaic power system

Determination of the main sliding direction of space rock landslide

Developing clean energy scientifically according to reasonable division

Development and application of software for ultrasonic testing on service stress of concrete

Development of the solar evaporation-dehumidification cooling system

Dielectric barrier discharges plasma inactivation of Microcystis aeruginosa: Effects and mechanisms

Diffusion leakage model study on chemical materials taking Liquid Ammonia as an example

Discussion of the maximum design current velocity of small towns' drainage pipelines in South China

Discussion on sustainable use of energy based on circular economy — A case study of Beijing

Discussion on the implementing approach of unsaturated matric suction in the slice methods

Distance discriminant analysis method for stability prediction of rock slope in hydropower engineering regions

Drawing management system design based on ObjectARX.Net

Ductility performance of reinforced concrete frame structure with specially shaped columns

Dynamics and driving factors on Hongjiannao lake in northern shaanxi province

Effect of a latent heat thermal energy storage unit used in project

Effect of irrigation and fertilization methods on yield and fruit quality of film-mulched watermelon in greenhouse

Energy efficiency research and analysis on district heating boiler in Tianjin

Environmental impact of lighting project on wetland on the edge of the city

Evaluating portal collapsing risk of Bailongshan mountain tunnel with grey clustering method

Evaluation and analysis of land suitability based on matter element analysis and GIS technology: An case study at Dongbeigou small watershed of Pingquan county in the water resource area of Beijing and Tianjin

Experiment research on decision of spontaneous combustion zone in goaf on fully mechanized coal face

Experiment research on the composite material produced by waste residue from paper mill and recycle polyethylene

Experimental study of thermal comfort for direct radiant floor heating system utilizing R22

Experimental study on ptc pile composite foundation with cap in treating expressway soft soil ground

Experimental study on anaerobic fermentation of high concentrated cow dung mixed with wheat straw

Experimental study on fractal characterization in damages crack of coral aggregate

Experimental study on interface friction characteristics between geosynthetics and fill materials by pull out tests

Experimental study on MAP recycling in landfill leachate

Experimental study on soil erosion process on the slopes of different soils texture

Experimental study on steel fiber reinforced concrete columns under low cyclic

Experimental study on the thermal expansion coefficient of high-strength/performance concrete at early ages

Experimental study on two dimensional carbonation of fly ash concrete

FEM study on the shrinkage property of fiber reinforced mortar

Field monitor and research of optimizing design on deep buried road tunnel in loosen and fractured layer

Filter technique of variable frequency speed control system

Finite element analysis of a half-through reinforced concrete tied-arch bridge based on FEM program ANSYS

Fluid-solid coupling analysis of safety of waterproof gate

Fuzzy comprehensive evaluation of durability based on the analytical hierarchy process

Fuzzy optimization of time-cost-quality for Dayawan water diversion project with FTOPSIS

GIS-based decision support system for urban land expansion

Grain pricing in the Huanghuaihai Plain based on green accounting

Highway construction and protection of sichuan giant panda sanctuaries

Influence of groundwater level lowering on working behavior of composite foundation

Influence of pH value on availability of heavy metals in municipal sludge

Landfill leachate treatment by electrocoagulation

Live load analysis under assessment reference period for in-service bridge basing on load survey

Low temperature performance evaluation of hard asphalt binder

Measurement of VOCs emissions from cooking in the Northeast Area of China

Measures to improve the recovery rate of fully mechanized caving

Measuring soil moisture and designing a automatic watering system

Mechanics parameter analysis model based on the composition reinforced steel-cemented soil beam

Migration characteristics of petroleum in aquifer

Modeling shipping energy saving and emission reduction in three gorges Wanzhou district and its application

Molecularly imprinted technique-flow injection-chemoluminescence system analysis detect hydroquinone in water

Monitor design research on slope stable in Haizhou Open-pit

Multi-objective Optimization design of the multiphase pump boosting cell

Noise pollution measurement and analysis of Wuhan-Guangzhou express railway train interior and exterior

Nonlinear numerical analysis of asphalt concrete pavement structure on settlement

Numerical simulation analysis on stability of tunnel under unsymmetrical pressure during excavation

Numerical simulation of acoustic wave field of seafloor sediments based on Biot model

Numerical simulation of wave-induced dynamic response of saturated silt seabed

Numerical simulation on tensile properties of Ω-shaped frozen pipe joint

On the application of spatial information technologies for highway environmental protection

On the concept planning for the central China international industrial materials city of Nanchang

Optimizations of contract incentives and duration for construction programme management

Parameter identification of vehicle step steering dynamic system by prediction-error approach

Participatory community planning approach in reconstruction of urban and rural communities

pH process modeling using neural network

Policy simulation and analysis of replacing outdated productivity towards iron and steel industry

Prediction model of water consumption using least square support vector machines optimized by hybrid intelligent algorithm

Prediction of silt soil subgrade moisture content based on unsaturated seepage theory

Preparation of diclofop-methyl enantiomers by a semi-preparative high-performance liquid chromatography

Quantitative Analysis of combined effect of multiple factors on CO2 internal corrosion in gas gathering pipeline

Relationship between bed and wall roughness coefficient of uniform flow in smooth flume

Removal of chromium Cr(VI) by electroflocculation process with double-aluminum electrode from wastewater

Research advance of thermodynamic systems with nonaqueous working fluids applied in low-temperature energy power generation

Research and application on soft soil foundation treatment by static-dynamic drainage consolidation

Research of bored pile drilling technique under complicated geological condition

Research on alternating projection algorithm in evaluation of urban space quality

Research on composite of pre-reservoirs technology for the removal of SS in non-point sources pollution

Research on dam seepage detecting based on EH-4

Research on deformation characteristics of slope based on slope monitoring

Research on divergence phenomenon and rejection method of Kalman filter on discrete system

Research on dynamic response of phosphogypsum tailing ponds under seismic load

Research on inductance parameters of transformer winding applied transient voltage

Research on neutralization mechanism of concrete subjected to acid rain

Research on photocatalytic activity of the titanium dioxide doped with transition metal ions in dyestuff wastewater

Research on soil improvement for waste rock piles remediation

Research on the caisson sinking method of north anchorage of Taizhou Changjiang River highway bridge

Research on the evaluation of air conditioning of the solar energy or the wind energy-ground source heat pump based on the cost year-end value

Research on the landscape of Terrace Land and discussion on the management pattern

Research on the strengthening method of long span two-way curved arch bridges

Resource and environmental pressure and carrying capacity of regional economies

Risk assessment of ground settlement induced by construction dewatering of Taizhou Bridge anchorage caisson foundation

Risk management in BOT projects of WTE plant

Road corrugated steel pipe culvert applying and strain measuring with fiber grating test technology

Rock burst trend research and burst hazard assessment of complex structure coal seam in deep mining

Route and countermeasures for the establishment of ecological cultural tourism environment

Screening and identification of aerobic denitrifier with nitrite as substrate

Simulation and factor experiment analysis for cooling and heating load of terminal based on TRNSYS

Simulation and optimization design of subway station foundation construction

Simulation of groundwater level variation of a rainfall-related landslide in Japan

Simulation of occupant evacuation based on 3D scenario analysis

Simulation on equivalent BSFC control strategy for hybrid electric bus

Simulative analysis of the influence on metro dynamic response by track curve radius

Slope finite element generalized reliability algorithms

Soil erosion change on the Fu-niu Mountains of Huaihe River Valley

Stability analysis of soil slope during rapid drawdown of water level

State of the art of researches on racking performance of post and beam timber construction

Studies on Loosened zone of surrounding rock underground powerhouse cavities for Jinping I Hydropower Station in construction

Study and application of dislocation repair of arch rib of steel tubular arch bridge with negative pressure grouting

Study and application of reinforcement of soft foundation with grouting anchor pipe nail

Study of grey correlation analysis on rigid frame bridge construction stress influencing factors

Study of quantity characteristics of double valves fuel injection system with electronically controlled

Study on active time-saving control system

Study on attenuation characteristics of stress wave in joint rock based on damage mechanics

Study on crystallization behavior of magnesium ammonium phosphate

Study on decolorization of yeast wastewater using ferric chloride

Study on dynamic mechanism and analysis of rural regional features

Study on energy efficiency renovation of existing residential buildings in severe cold district

Study on environmental geological problems in anqing copper and flood control

Study on hazard source evaluation in construction sites with modified LEC method

Study on local scour at bridge abutment of Mai Gaiti Bridge in Xinjiang with extension method of series models

Study on maximal allowable discharge amount of toxicant based on ecological risk

Study on micro-polluted raw water treatment by rectangular biological sedimentation tanks

Study on one-dimension consolidation mechanism, equation and Analytical Solution of soft soil in vacuum preloading

Study on photocatalytic degradation of dibutyl phthalate in aqueous solution by means of photo-Fenton technology

Study on residual strength of concrete filled steel tube after exposure to explosing impact

Study on Safe Rock Pillar Thickness and gas source control with short distance protective layer extraction

Study on simulation of Lean NOx Trap for lean burn gasoline engine

Study on smoke control efficiency in ultra-long railway tunnel under fire condition

Study on spatial-temporal evolution characteristics of landscape pattern in water-level-fluctuating zone of Three Gorges Reservoir Area within Kaixian County, Chongqing City

Study on the concrete carbonation depth based on genetic neural network

Study on the ecological ethic in highway construction

Study on the effect of fracture characteristics to ultra-low permeability reservoirs development

Study on the electrical resistivity and strength of cemented soil contaminated by Sodium Hydroxide

Study on the explosive fracturing technology for low permeability reservoir

Study on the Forming condition of human debris flows and its prevention

Study on the high-temperature gas field containing H2S sewage corrosive behavior

Study on the macro-treatment model of mine geological environment

Study on the method of use hot-box to calibrate heat flux sensor

Study on the properties of sea sand concrete

Study on the removal of nitrate from water by Fe/C micro-electrolysis process

Study on the removal of nitrate in groundwater using rice straw as the solid carbon source

Study on the structural form selection of high-rise building with MATLAB self-organizing competitive neural network

Study on the wind vibration response of the glass curtain wall considering the turbulent wind

Subgrade moisture content forecast based on probability of precipitation

Sustainable infrastructure under the influence of mega-events

The analyse of examples on sustainable development and building energy saving in Sweden

The analysis and research on water quality and consumption in concentrated apple juice production

The analysis of accident black spot at the intersection of NO. 320 state road crossed with Lingjia Bridge

The application of TPS modified asphalts in granulated crumb rubber asphalt mixture

The assessment of emergency system to sudden nature disaster in the city

The conception of prestressed reactive powder concrete composite box-girder bridge with corrugated steel webs

The current situation and development strategy of photovoltaic industry in China

The discussion of soil elements of the vertical distribution characteristics at scallions origin - Zhangqiu

The dynamic simulation experimental research on treatment of acid coal mine drainage by loess-microorganism system

The exploratory creation of modern hospitals' planning and design based on “inosculation”—The design of the newly-built complex building of Harbin No.242 Hospital

The factor analysis method applied into the flammability of tree species

The forecast of ship speedability based on model test

The influence of calcium to the map precipitate recycled from wastewater

The influence of clip bottles on top-coal's falling and release properties

The investigation and control of a typical landslide along ZaMo road of Tibet

The mechanism and application of Co-metabolism in north cold biogas fermentation

The monitoring and method of controlled blasting demolition of long span arch bridges

The pile foundation of high-rise buildings treatment depth optimization in covered karst areas

The psychrophilic methanogens application in anaerobic biological treatment and research on cold-adapted mechanism

The quantified board models of fine-grained soil layer subsidence caused by pit dewatering

The research and strategy on urban public transportation with game theory

The research on evaluation system for equipment manufactures

The setting of Acoustic Emission detecting parameters in running of steel structured

The situation and prospect of Led lighting using in building illumination design

The special strategic status of the Environmental Protection in the implementation of the scientific concept of development

The strategy and application of urban design in Paris

The study for the combination of SVG and TSC

The study of parameters in the construction technology of Lime-treated expansive soils

The study on 3D contact-friction pounding model based on OpenSEES

The study on degradation of 2,4-dichlorophenol by Pd catalyzed electrode modified with surfactants CTAB

The study on Size effect of fracture toughness of test of undisturbed frozen soils based on Gray theory

Theoretical study on characteristics of clipping for different layered structure

Three-dimensional stability analyses of isotropic earth slope based on strength reduction FEM

Time-dependent reliability analysis of cable-stayed bridge based on Monte-Carlo stochastic FEM

Variation of the fraction transformations and mobility of Cu and Zn in municipal sludge with pH

Variations of soil properties in succession process of Phragmites community in estuarine wetland of Panjin

Western architecture: A history of design approach

Dynamic failure of single-layer spherical reticulated shell with imperfections

Static behavior analysis of a space structure composed of annular tensile cable-truss structure and single layer lattice shell

A classification model based on extenics with weighted features for rolling bearing quality test

A design of intelligent electromotor protective device based on simplified thermal effect model

A detection method based on sonar image for underwater pipeline tracker

A fast hidden surface removal algorithm for electrically large problem

A fingerprint image enhancement method based on Gabor filter

A general query middleware based on web service

A new high resolution wide swath SAR system

A new improved direct anonymous attestation scheme with enhanced anonymity

A new kind of unidirectional waveguides

A new measurement of high-frequency voltage

A novel NUSS-FFT SAR imaging algorithm of non-uniform spatial sampling data

A numerical simulation on mining pressure law of mechanized mining face in Chang Gou yu Mine

A recent-biased clustering algorithm of data stream

A simple method of measuring for building-shielding-efficiency

A sort of control algorithm of PMSM based on the flux and the rapid control prototype development

A variational inequality model for supply chain

Algorithm of exposed terminals concurrent transmission based on reverse path in MANET

Amplitude-comparison monolulse for CWRadar low-altitude target elevation off-line measurement

An adaptive design for high speed space-time block code

An adaptive wavelet transform based on lifting scheme and its application

An algorithm of channel estimation in All-phase OFDM system

An automatic determination method based on color sensor at the end point of the titration

An immune based method for harmful network text information discovery

Analysis and computational methods for cascaded networks system

Analysis of excavator cab structure vibration and its noise response

Analysis of flow field and sound field characteristic of 2D airfoil based on FLUENT

Analysis of join-structure influencing on guidance system for high-speed maglev train

Analysis of lower frequent vibration of large wind turbine tower

Analysis of optimization operation for ultra-supercritical pressure generating units

Analysis of passive intermodulation based on Taylor polynomial

Analysis of pulse optimization of frontal crash on a specific vehicle

Analysis of the capability of casing tripping in horizontal well

Analysis of the statics blending problems by boundary element method for thin-plate with supporting in the domain

Analysis of transmission characteristics of waveguide with double ridges on the short narrowside using finite element method

Analysis of wavelet de-noising for porosity inspection in carbon fiber reinforced composite

Analysis on air-solid two-phase flow in the sieving-setup of a new -model hammer mill based on FVM

Analysis on principle and key techniques of deterministic finishing

Analysis on the influence of the posture error of 3-TPT PMT movable platform

Analysis the mathematical model and research on the experiment of controllable damping hydro-pneumatic spring

Ant colony optimization for design of FIR filters with signed-power-of-two coefficients

Anti-jamming communication decision engine based on Particle Swarm Optimization

Application of ACC/DEC interpolation algorithm in steam turbine blade NC machining

Application of differential evolution algorithm in purchase cost optimization

Application of hot-formed sheet steel on inner panel of front cross member

Application of projection pursuit regression method in the confirmation of liquefaction grade of sand soil

Avalanche effect performance test on AES algorithm

Based on Pro / MECHANICA structural analysis of diesel engine connecting rod

Cellular automation method on analysis of temperature field for milling insert with wave-edge

Chaos identification of tractor vibration signals with numerical methods

Closed-loop data flow in CAX chains and application

Clustering analysis of space reconnaissance intelligent service requirements in presence of military values

Computerized design and simulation of a high-ratio compound gearing

Construction of gas flow standard facilities by means of positive pressure sonic nozzle

Construction of the vehicle maintenance material precision support model

Constructucting method of VIP and VMM based SoC verification environment

Contact boundary of vibrating rotary forging deformation

Density detection of concrete structures with Wood Wool Cement Board as permanent shuttering template

Design and application on optimal calculation for time period's distributing in pumping station

Design and circuit implementation of a conjugate Lü chaotic system

Design and implementation of parallel word occurrence frequency based on message passing interface

Design and realization of gas-solid two-phase flow standard facility

Design of 13.56MHz RF card reader based on MF RC500

Design of a high gain circularly polarized microstrip antenna

Design of a trial undulator applied in THz radiation source

Design of ECG monitoring system based on wireless sensor network

Design of spectral analyzer based on FPGA

Design on SOC module-level functional verification platform

Development and application of the wireless transmission device in field data

Development and implementation of electrode management system in mold making shop

Development of deep hole machining tool

Diameter protocol analysis and applications

Dielectric properties of the polyaniline/Zinc oxide composite

Dynamic and static analysis and design of the 3-axis double-column machine tool

Effect of cold working on mechanical properties of a cobalt base superalloy

Effectivencess evaluation of artillery based on grey target theory

Effects of shape-gene on the secondary electron emission of curved-surfaces in low-octane primacy electrons

Electric driving requirements of large CMOS CCD array based on a 3-phase CCD cell by SOI LDMOS

Electromagnetic measurement and tomography

Electronic cash protocol with anonymity withdrawal under a third party supervision

Experimental study on acoustic emission characteristics of the damage process of concrete under uniaxial compression in different ages

Exploration and innovation of the construction for automobile structure

Fabrication of the polymer diffuser with surface microstructures by using the extrusion roller embossing process

Fast tuning algorithm of HF-VHF antenna tuner based on neighbor searching

Feasibility study on Electromagnetic Tomography system using GMR sensors

Feature extraction of turbine abnormal vibration condition based on ICA

First-principle calculation of Ge-doped anatase TiO2

Flight control system design for miniature unmmaned helicopter based on PowerPC

Float state and static stability analysis of the biomimetic robotic dolphin designed on the change of the barycenter

Fuzzy supervision control of the internal dynamics of 80MN titanium-alloy forging hydraulic press

Gray relational analysis decision-making model based on interval number operation rule

Grounding device of structural analysis and discussion

Home Health test Analyzer

How the interference between flows influents the fairness of IEEE 802.11 DCF

Improvement on electromagnetic compatibility of voltage source PWM rectifier based on chaotic SVPWM

Influence of cold arm thickness on mechanical property of U-shaped polycrystalline silicon microelectrothermal actuator

Influence of lightning attack to field in aircraft

Influences of shields to the inductance with transient currents

Manufacturing of bionic functional surface based on the replication of biological surface morphology

Measurement techniques for multiphase flow in productivity evaluation in petroleum industry

Mechanics-action analysis and research about wheelset dismantler in pressed conditions

Method and model of B-Ga-Al diffusion processes for fabrication of silicon on insulator wafer with buried P-type layer

Methods of reliability estimation for numerical control machine tool based on performance parameters

Millimeter wave near-field wideband array holographic imaging system

Mobile machine control in the internet of things

Mode-dependent non-fragile H∞ controller design for discrete-time Markovian jump system

Model analysis of single stacker fork based on FEM

Modeling and experimental analysis on the transverse nonlinear vibration of metal belt transmission with permanent magnets

Modification and properties study of thermo-responsive PVDF flat membrane

Moulds CAD/ CAM based on AutoCAD and MasterCAM

Multi-method integration software for radar low-altitude target elevation off-line measurement

Neural network and antenna model application on pulse magnetic field measurement

New method for compensating uncertainty of control plant

Numerical Analysis of Diesel Engine oxygen-enriched Combustion Characteristic Based on the Simplified Mechanism of n-heptane Oxidation

Numerical simulation on temperature field for arc spray rapid prototyping

Numerical simulation research on larger industrial heat exchanger

Numerical study on air-side flow and heat transfer characteristics of steel tube brazing snake-like fins for direct air-cooled condenser

On M-type fuzzy controller and simulation

On the cache mechanism for ISMBDI mode based on ontology

On the ontology-based semantic indexing mechanism in vocabulary knowledge base

Parametric CNC programming of reconfigurable machine tools based on remanufacturing

Passive automatic maximum wind energy tracking wind power generation system

Performance of systematic RA code in long haul optical fiber communication system

Phase-out factor with particle swarm optimization

PLC control system design of large gantry planer based on variable-frequency drives

Precision analysis and simulation research on control system of ballistic missile

Preparation of novel materials for set piece tube

Preparation of ODS iron base superalloy by powder metallurgy

Profile-based 3D modeling of urban underground space

Property Tests of Nano-indentation on pads of Gampsocleis gratiosa

PTFE composite membrane preparation and performance testing on alloy anode oxidation

Radar image simulation based on target microwave properties

Radiometric correction of hyperspectral imaging data in spacial dimension and spectral dimension

Reach on dynamic mechanism of land intensive use for highway construction

Reasonable coal pillar size design in Xiaoming mine

Remote control system for LED lighting based on CAN bus

Research of AC adjusting speed system based on DTC and neural network supervision control

Research of auto NVH material performance and noise reduction effect

Research of China's industrial sustainable development facing climate change

Research of cruise pre-warning system based on MMW radar

Research of section torsion beam based on multi-body dynamics

Research on 3-demision terrain generating technique for simulation of battlefield visualization

Research on art graduation design exhibition based on Virtual reality

Research on automobile intelligent anti-collision system

Research on cavitation flow in jet pump based on FLUENT

Research on deforming force of magnesium alloy tube extrusion

Research on digital design method of worm helicoidal surface

Research on Doppler frequency-shift in satellite communications based on ephemeris of satellite

Research on g-function of Camellia algorithm

Research on high-performance control methods of positioning for AC motor

Research on multi-pulse chaotic dynamics of six-dimensional nonautonomous rectangular thin plate

Research on On-line Monitoring & Trouble Diagnosis of Large-size Pump Set

Research on performance evaluation of Inter-Satellites laser communication system

Research on road feeling control of Steer-by-wire System

Research on several LEMP electric field measuring equipment's emendation devices

Research on the client-side cache technology of the intelligent network disk storage system

Research on the fracture toughness test methods for high grade pipeline steel

Research on the RCS of complex target using FEKO

Seismic evaluation and strengthening for a power-transmission frame

Simulant study about input/output characterization of highly nonlinear multivariable systems

Simulation analysis of time domain and frequency domain test methods of electromagnetic shielding effectiveness of materials

Simulation of MR semi-active control of tracked vehicles based on road multi-input excitation

Simulation research and programming of torque fluctuation of automotive steering system

Simulation research of wireless communication system of LDPC code based on the adaptive modulation and precoding joint optimization technology

Simulation research on the performance of IR-UWB rake receivers

Stamping of the Engineering Agricultural machinery parts

Structural stress analysis of infrared detector with underfill

Structure design and magnetic circuit optimizing simulation of vane MRF damper

Structure optimization of strap-down inertial navigation system support

Study of combined control strategies for Switched Reluctance Motor

Study of coupling characteristic of metal chamber with aperture based on FEKO

Study of EMP effects experiment on the solid state relay

Study of FPGA technology applied for stepping motor subdivision drive

Study of LED image detecting based on detail holding adaptive median filter

Study of numerical simulation of Aircraft Lightning Zoning based on CST software

Study on attitude measurement in gyro-free inertial navigation system

Study on automatic assembly technology for complicated gear trains based on topological unit

Study on designing driving coil with cooling chunnel of Electromagnetism Drive

Study on key techniques of control system for tread extruder production line

Study on key technology of mechanical system design and manufacture technology of three-axis turntable

Study on mixture formation for a direct injection lean-burn LPG engine

Study on richards model in the prediction of wharf foundation settlement

Study on serial collaborative optimization algorithm based on Nelder-Mead algorithm

Study on the dynamic equilibrium of control system

Summary and development of image reconstruction algorithm for ECT

Supplementary study on camera calibration based on triangle

Survey of reliable and efficient MAC layer multicast protocols in MANETs

SVPWM control on 2-phased hybrid stepper motor

System dynamic analysis for motor car-Influence of wheel tread reprofiling

Temperature compensation of high-precision I/F converter based on BP neural network

Testing electric resistivity with method of whirling currents

The analysis of attenuation of trapezoid ridge waveguide by finite difference time domain

The analysis of the properties of a tunable split-ring resonator of metamaterials

The analysis on the powerful devices in pulsed power supplies

The application and problem analysis of RFID

The application of μC/OS-II in welding machine control system

The control system and algorithm of brushless DC motor based on DSP

The covitation erosion behavior of copper alloy in the corrosive medium

The depolarization effects of Earth-Space link at MMW Bands

The design and implementation of automatic access control system based on the face recognition

The design and realization of a comprehensive SPI interface controller

The design of one Web 2.0 start system

The design of water quality environment automatic monitoring system based on wireless sensor network within industrialized aquiculture

The detection system of vehicle driving simulator attitude based on ADXL335

The essence of Toyota system in system theory

The evaluation of the second-order pre-iteration Landweber algorithm based on the method of model-group

The experimental study on biomass gasification characteristic by the influence of fluidized bed reaction temperature

The general MIPML absorbing boundary condition for frequency-dispersive media in FDTD analyses

The hot state test research of nozzle character on secondary cooling zone of slab continuous casting process

The implementation of GLOBE based WMS

The implicit method of solving common fault failure with GO-FLOW methodology

The improvement of side-scan sonar's towfish

The integrated scheme of High-Definition Environmental-Protection Multimedia Intelligent Conference System

The multiband microstrip patch antenna based on LTCC

The reliability-analysis of kinematics position accuracy of a kind of 3 - TPT parallel lathe

The research and application of the optimization technique of continuous annealing line temper mill roll contour

The research and schedule of E_carburettor for anti-disturbing

The research of Lightning Protect for aerocraft electro-equipments

The research on dehydrating of heavy oil by ultrasonic

The research on test scheme of the digital Electromechanical Actuator based on CAN Bus

The residuated lattice properties of MP-Algebras

The safety management of railway dangerous goods stations

The status of indoor air contamination concentration model and evapotranspiration prediction method

The study of motorized trunk treatment with advance and retreat injection needle and its clamping structure

The study on the emissions of a direct injection diesel engine fuelled with methanol/biodiesel blends

The study on the TERCOM mismatch diagnostic based on detecting the extreme value of similarity

The study on the test generation of digital circuit on the basis of the GA and the ant colony algorithm

The sweeping spectrum range and the instantaneous frequency estimation of the nonlinear chirp signal

The tangential stiffness matrix of Mooney-Rivlin model strain energy function-based rubber material in finite element method

The thought of the optimization algorithm for the commodity hard-packaging size

The three-dimensional virtual design technique based on AutodeskInventor2010 of food packaging rigid container

The transient sound radiation monitor of a free beam by a single point vibration measurement

The virtual assembly and motion simulation of belt Conveyor basing on SolidWorks

Thermal conductivity testing system of loose coal

Thermal-structure coupling analysis and optional design of altiplano rolling kitchen pressure vessel

Three-phase inverter circuit PWM controller which is based on CPLD

Trend analysis and prediction of mine earthquake of Pingdingshan coal mining area

Turbine inlet parameters' effect on diesel waste heat recovery by Organic Rankine Cycle

Two stage beamforming localization algorithm for secondary sound source

Use system theory made a model of petrochemical enterprise disasters

Using cluster technology for establishing meteorological communication system based on shared memory

Vector control of permanent magnet synchronous motor based on matrix converter

Visualization of the experts' opinion consistency for group discussion

Wireless Sensor Network based anti-theft system of monitoring on petroleum pipeline

Φ3.2m×5.3m damp mill virtual prototype design and kinematic simulation

Thermal-mechanical coupling finite element analysis of laser cladding process Part I: Temperature field

A compile method supporting multi-language of control engineering

A determination method of position,attitude and velocity based on inertial/magnetic for human movement

A hardware design of Steer-By-Wire system based on MC9S12XF512

A high-resolution time-to-digital converter based on the relationship of time-space

AGV trajectory track using nonlinear model predictive

An application study of EAN.UCC bar code identification system in the quality of agricultural products traceability

An passive terminal simulator of IEC 60870-5-104 protocol using ACE framework

Analyse the angular velocity estimation errors of α-β-γ filter based on high sampling rate

Analysis and improvement of corrosion problem in automobile components

Analysis and prevention of casting cracks of small tractor gearbox

Analysis and simulation for Vector Control VVVF System

Analysis of armature's characteristic in the induction coil launcher

Analysis of bed-building discharge in the middle and lower Ba River

Analysis of deformations of a machine tools' beam caused by linear motor's normal force

Analysis on periodic response of vertical impact damper system

Analysis on shear stress in interlayer interface of concrete bride deck pavement

Analysis on vibration and vibration-elimination of nuclear-powered pipe

Analysis of motorized spindle's thermal property based on thermal contact

Application and research of primer-free painting on automobile interior surface

Application of chaos in sonar detection

Application of preview control in linear motor servo mechanism

Application of two fuzzy c-means clustering algorithms in segmenting the sonar image from a small underwater target into multi-regions

Applied research of RFID cigarette pallet management system

Automatic control method research on pendulum speed of roadheader's cutting arm

Based on ANSYS to the finite element analysis of the Circular Stacker-Reclaimer

Based on the grey theory of a plane hydraulic system wear trend prediction methods

Based on the matlab permanent disc high magnetic separator magnetic field numerical analysis

Based on the power carrier and GPRS communication technology of CPS remote monitoring system research

Brief introduction to rock mass deformation test equipment and automatic servo system under high stress

CAD/CAE application in centering EDM machine design

Character recognition research based on BP neural network

Cold rolling force prediction for copper strip based on applications of GA and BPNN

Comments on large-signal based modeling methods of DC/DC converter

Control for the lateral vibration of footbridges induced by pedestrians

Control strategy and thermal management system research of fuel cell engine in sub-freezing

Coupled stress and fluid flow analysis of earth dam after concrete core-wall reinforcement based on non-linear finite element method

Defect detection of wind turbine gearbox using demodulation analysis

Design and dynamic simulation to virtual prototype of the fast hitching and unhitching device

Design and implementation of low-cost scissors gate control system

Design and implementation of No center self-organizing network IP phone system

Design and implementation of teaching 《The programming and processing of part》 (NC)

Design and realization of lake water quality detection system based on wireless sensor networks

Design of adaptive sliding-mode controller for buck DC-DC converter with power losses

Design of an electromechanical actuator used in a torpedo

Design of AT hydaulic shift system based on the logical-shift formula

Design of Brain Emotional Learning model based hydraulic servo system

Design of coal blending automation control system for coke-making

Design of electrostatic velocimetry correlator used in gas-solid two-phase flow

Design of monitor program based on status analysis for intelligent blood glucose meter

Design of the crystallization monitoring system based on CAN bus

Design of the detection system of CNC lathe thread machining

Design of the new multifunctional charge device system for taxi

Development and design of paint coating's preparation system

Development of access controller based on dual-CPU design

Discussion on transient response analysis based on DSP

Discussions on teaching methods for engaging students in engineering graphics course

Double-neuro-sliding mode position control for direct drive turning table servo system based on genetic algorithms

Dual adaptive predictive functional control of boiler deaerator system

Dynamic analysis of nonlinear elasticity beam using DQ semi-analytical method

Dynamic modeling and dynamic characteristic analysis of bonding wire

Dynamic properties of 1.5MW wind turbine blade with eccentricity fault

Dynamic weighing system for mining shovel based on sensors network technique

Effect of altitude height on combustion noise of DI-diesel engines

Effect of annealing on adhesion for Ti/Ni/Ag electrodes

Elastic wave band gaps of a one dimensional rod phononic crystal with two inside-period structures

Error sources analysis and optimizing for online detection system of automobile air flowmeter

Experimental investigation on chaotic vibration of cantilever beam subjected to base in-plane excitation

Experimental investigation on heat transfer and flow resistance characteristics of spirally fluted tubes

Fatigue test of carbon fiber used in repair and reinforcement on crack

Finite element analysis of large mirror based contact theory

Finite element solution method on power loss of plateau type and epoxy resin casting current transformer

Foundation design on geographic information system of heating networking district heating in Urumqi

Furnace thermal calculation of 300MW boiler by oxy-fuel combustion

Fuzzy control and simulation for double inverted pendulum based on information fusion technology

Fuzzy self-adaptive PID control in actuator control system of unmanned aerial vehicle

Gap status identification and control of wire electrochemical micromachining

Impact on thrust force in construction parameters of slotless permanent magnet linear synchronous motor

Influence of droplet diameter on vortex flow meter in steam flow measurement

Influencing factor and corresponding method of target drone dynamic stability

Information poor relation of inner ring rib roughness with tapered roller bearing vibration

Internal friction of nanocrystalline Ni and alloys of Ni and Fe

Inversion and virtual assembly of topological unit

Key technologies overview on mobile Internet access and mobility support

Key-free safe based on palmprint recognition

Kinematic and dynamic optimizations of the redundant manipulator via local degrees of freedom

Kinematic constraint conditions and dynamic equations of spatial flexible parallel manipulator

Laser beam welding of dissimilar metals of aluminum alloy and galvanized steel sheet

Linear generalized synchronization construction of chaotic systems with different dimensions

Measurement and control for ball mill system based on information fusion technology

Mechanism of assessing moisture in transformer insulation by return voltage method

Method of equivalent research of typical automotive parts

Mixed FEM of B-spline wavelet on the interval for beam structures based on node parameters

Modeling and fault analysis of EMB motor

Modeling and stability analysis of networked control systems with network-induced delay and data packet dropout

Network planning method for distribution systems based on planning analytical foundation

Notes on MacNeal slender beam

Numerical simulation and optimization of aerodynamic performance in a radial air turbine

Numerical simulation and testing research of minimal-oil ignition burner on pulverized coal fired boilers

Numerical simulation of bolt and cable support combined support based on finite difference calculation method

Numerical Simulation of flow and drag reduction characteristic of hydrophobic surface

Numerical simulation of surrounding rock activity and mining pressure regularity in Haoda mine fully mechanized working face

Optimal design of Flywheel Energy Storage System rotor supported by AMB

Optimization steady state control of turbofan engine in the whole flight envelop based on Support Vector Machines

Optimization study of automatic transmission power shift schedule

Path planning of robotic griding for workpieces with complex surface

Permeability test of pervious concrete in different rainfall

Prediction method for running-in status of wet clutch based on third-order cumulant

Range of flame free-jet in jet firing system

Research on kinematics and simulation of a three-DOF parallel manipulator

Registration method for scattered cloud data based on feature points

Research and application of VCR plus technology in hot strip mills

Research and upgrading based on SLC500 PLC on jigger control system

Research for surface semielliptical crack stress intensity factor numerical simulation in power station heat exchange tube

Research of an integration model combining Rough Set with extension theory for fault diagnosis

Research of modular machine tool design system rapidly base Group Technology

Research of VOC pollution of non-metallic components in a vehicle

Research on a combined opener device for the ridge-till and no-till seeder

Research on CAD/CAPP integrated system for automobile wiring harness

Research on camera calibration methods of the machine vision

Research on curvature ratio upon working properties of Linear Motion Guides

Research on double-motor synchronous control system based on active disturbance rejection control

Research on lubricating boundary conditions of rock bit journal bearing

Research on mathematical models of a novel “S” tooth profile gearing

Research on method of product configuration based on knowledge and Tabular Layouts of Article Characteristics

Research on process planning and progress control for large-scale ship building

Research on steering motion of omnidirectional platform based on Mecanum wheel

Research on the 4-axis numerical control flame cutting machine for practice teaching

Research on the hardware system of measurement on urban residential areas night light

Research on the influence factors of palygorskite nano-particles forming self-repairing film in steel-steel pair

Research on the micropump based on the magnetocaloric effect of magnetic fluid

Research on the pose error elimination control method for boom-type roadheader

Research on the simulation of cascade utilization of engines' waste heat based on TEG and ORC

Research on the software system of measurement on urban residential areas night light

Research on the temperature rising influence on the gas chamber length of hydro-pneumatic spring

Research on the test and the parameter design of hydro-pneumatic spring

Segmentation of a sonar image from a small underwater target using the improved fuzzy clustering algorithm

Simulation of liquid level maintain device of explosion-suppression water bag for mine

Simulation of the assembly process of new type single metal floating face seal

Simulation of the automatic coal flowing equipment based on Pro/E

Simulation On ABS and TPMS merging system based on fuzzy PID control

Simulation study of two-phase gas-liquid flow capacitance-cross-correlation flow velocity measurement based on MATLAB

Slewing maneuver and vibration control of tethered space solar power satellite

Strength and fatigue analysis for automotive pedal based on CAE

Structure innovation and example of double-enveloping cycloid planetary transmission

Structure optimization of rear door based on side impact of a specific vehicle

Structure parameter selection in rolls during hot rolling

Study and field application on broken-down tecnology of acoustic and negative pressure

Study for technics of friction stitch welding

Study of the cold-extruding tapping process of titanium alloy and the machine of compound vibration

Study on 3D node location algorithm for wireless sensor networks

Study on a small explosive magnetic flux compression generator design

Study on adaptive filtering detection for the rotor bar breaking of 3-phase asynchronous motor

Study on car body vibration transmissibility analysis approach for railway passenger carriage

Study on control strategy of starting process for clutch of AMT vehicle

Study on effect of elasticity on the mattress comfort with objective and subjective methods

Study on lubrication and dynamic sealing performance of seals under high pressure and high speed

Study on microstructure and mechanical properties of aseismic reinforcement Nb microalloying steel

Study on mixed quality of rare earth extract's double-decked stirring paddle

Study on principle and technology of position and attitude parameters measurement system for roadheader

Study on sintering technology of cemented carbide

Study on static rigidity of a high-speed vertical machining centers named VH1100

Study on supply chain performance measurement system for agribusiness

Study on the staff scheduling and evaluation model of Human-machine hybrid production system in small and medium manufacturing enterprises

Study on the “RRR” type-approval of proprietary brand

Study on the technology of quadric surface extracting base on least square method

Summing up the system reliability design method of mechanical structure system and discussing the application of engineering

Technique to deal with the frequency dependent character of viscoelastic material basing on ANSYS modal analysis

The analysis of using dejectas collecting device in passenger train

The angular velocity estimation principal of α-β-γ filter based on high sampling rate

The application and research about P control chart in leak detection process

The application of compressive sensing based on wavelet in the reconstruction of ultrasonic medical image

The application of time entropy of lift wavelet on ultrasonic signal detection

The automatic control system based on PLC in concrete's grouting and vibrating project

The calculation on liquid holdup in horizontal gasliquid two-phase annular flow

The design and implementation of an Intellectual Fire Truck used for competition

The design of local safety monitoring device for marine diesel engine

The design of Reference Sinusoidal Signal Generator Circuit for Photovoltaic Grid Based on CPLD

The design of the emperature and humidity supervisory monitor system

The effect of pre-deformation on the tensile properties for the CoCr alloy

The EMC analysis and design of the PCB

The excitation of synchronous generator based on fuzzy-single neuron PID intelligent controller

The FEM analysis of sliding column for inverted turning and milling machining center

The improved method of least squares support vector machine modeling and its application

The meshing force simulation of Synchronous Gear Pump

The recursive algorithm for Riccati matrix and the equivalent action

The research about ingredient of biaxial orientation pipe and the online detection of orientation by ultrasonic

The research and application of a portable and intelligent blast furnace cooling water temperature difference measurement instrument

The research of Electromachanical Actuator control system development based on the MATLAB platform using the RTDX

The research of license plate character recognition based on BP network trained by chaos particle swarm optimization

The research of silicon carbide rod heat control based on PLC

The simulation analysis of LPG engine combustion process by fire

The simulation of scara robot based on OpenGL and STL

The stamping and mold design on stainless steel cover

The structure and flow field analysis for a new static and dynamic combined high efficient mixer

The study on noise of main parts of diesel engine based on spectrum analysis technology

The study on radar synthesis measurement technology

The studying on the automation and control system of unloading line of tipper in PLC

The surface morphology of diamond films by hot cathode DC-PCVD

The vibration reduction and appraisal for little branch of a Nuclear Power Station

The YAG laser texturing technology and application with controllable disorder distribution

Thread probe measuring angle calculation of flexible calibration

Three-Phase asynchronous Motor Soft-starter via Thyristor for civic water supply system

Three-sample rotation vector algorithm with angular rate input

Track gauge dynamic measurement based on 2d laser displacement sensor

Two-stage DEA evaluation model with ideal-DMU

Underwater experiment and analysis of three-joint crescent caudal robot fish

Uneven cloud and fog removing for satellite remote sensing image

Using Petri Net to diagnose the fault location of Motor

Vibration transmission analyze based on wavelet theory and higher order spectrum

Thermal-mechanical coupling finite element analysis of laser cladding process Part II: Strain-stress field

A convolution type semi-analytical GD method for structural transient response

A nonlinear compensation method for Backlash transmission Backlash in Servo System

A novel digital predistortion technique for Ultra Wide-Band radar pulse-compression signals

A strong coupled CFD-CSD method on computational aeroelastity

A study on the park utilization status and park user's behavioral characteristics a case of Shanghai Zhongshan park

A study on construction contract management the establishment of Contract Management System

A study on failure model and mechanism of SFRC torsion member

Acquisition method research of parallel stereo binocular vision based on linear laser scanning

Active optimal control for multi-dim vibration damping device based on parallel mechanism

Adaptive control at launching using three loop autopilot

Adsorption of roxarsone from aqueous solution onto multiwalled carbon nanotubes

An automatic testing system for thermal batteries

An experimental Study on lubrication behavior of glass during deformation process of alloy Incoloy 800H

An experimental study on wheat husk ash affect the strength of mortar

An improved control method of maximum power point tracking of photovoltaic system

An optimization model of integrated forward/reverse logistics network for manufacturer of Joint operations under uncertain environment

An optimizing tool orientation method for positional 5-axis machining

Analyses on factors influenced top-coal caving of fully mechanized mining for thick coal seam

Analysis and determination of water level control system of boiler drum

Analysis of application characteristics of Chinese traditional architectural symbols

Analysis of Chinese urban skyline night view's design elements

Analysis of cost-benefit of green roof in Xi'an

Analysis of fire resistance of portal steel frame structure under different connections

Analysis of one-dimensional thermal consolidation of saturated soil under different thermal loading

Analysis of the PSD and PDF characteristics on typical flow regime of gas-liquid two-phase flow in horizontal pipes

Analysis of thrust and push speed based on BCF advance mode

Analysis on the worst load angle of Z-shaped concrete columns

Analysis on transmission characteristic of contactless power transfer system

Application and performance comparison of several new-type of building wall materials in China

Application and research on construction control of bridges on the basis of Artificial Neural Network

Application of fault tree analysis for fault diagnosis in screw pump

Application of FLAC strength reduction method to analysis of slope stability

Application of fuzzy matter-element model for water quality evaluation

Application of ISCST3 model on air environmental impact assessment of the Xishan Tunnel Project

Application research of ground shortest path based on GIS in the Emergency Rescue Information Management System for airport airside

Based on the battery voltage signal detection engine starting process

Calculation of additional pollutant gas emissions and their social cost from transport congestion

CFD simulation on ice slurry concentrating hydrocyclone

Characteristic of pollution and sources apportionment of PM2.5 in NanChang city

Classification algorithm based on rough set and support vector data description

CO2 removal from natural gas by hydrate formation

Comparison of response spectra in forward and backward directions in the Wenchuan earthquake

Comparison of sub-models of Heat transfer in network model of fire

Comprehensive evaluation of water resources carrying capacity in Huaibei City

Construction-control technique for PC bridge with cantilever casting method

Critical analysis of LOFT in the renewal of Chinese contemporary cities

Deformation mechanism and constitutive relation of soft soils

Design and development of a video and audio editing system for traffic safety education

Design and implementation of sunlight prototype system on cross-platform

Design and simulation analysis of UART IP Core

Design and simulation of temperature measurement circuit based on LabVIEW and Multisim

Design of DC motor position servo controler and simulation

Design of GNSS-R reflection channel based on segment correlation and FFT

Design of step motor control system based on AT89C51

Design research on the temperature sensor in hot iron based on ANSYS emulation

Designing and mechanical simulation analysis of grid-earth-rock emergency pavement slab

Detection of boom rotating angle for roadheader robot based on triaxial digit acceleration sensor

Detection, appraisement and strengthening of a plant building after fire

Determination of organic phosphorus pesticide in environmental water by flow injection-spectrophotometry

Development of automatic welding system applied in subsea pipeline laying

Development of internet of things for vehicle to promote electric vehicles large-scale demonstration application in Chinese cities

Development of marine main engine remote control system

Diesel noise measurement and control of behavior analysis

Discussion of Acipenser Sinensis habitat suitability index model

Discussion of influencing factors in electrochemical oxidation treatment of landfill leachate

Discussion on the applicable standards of railway environmental noise

Dynamic analysis of underground cavern's roof under motorcade load with thick-plate theory

Dynamic frosting characteristics on cold flat surface in different air temperature and humidity conditions

Dynamics of nitrogen with the development of C. Reinhardtii under a simulated water-sediment condition

Effect of electrical pulse on dynamic recrystallization of ferrite and properties of High-Carbon Chromium steel

Effect of excess-heat recycling on the performance of solar regenerator

Effluent organic matter removal during advanced wastewater treatment process: O3-BAC and AC/O3-BAC

Energy consumption and GDP growth in Beijing: Cointegration and causality analysis

Enhancement effect of microwave irradiation for treatment of low biodegradable organic wastewaters with a new combined process

Evolution of high concentration particle diffusion and coagulation in planar jet flow

Experiment study on beam-column joints strengthened by gluing steels

Experiment study on loess filling material improvement for the embankment of Zhengzhou - Xi'an railway passenger line

Experiment study on the law of thermal motion of water of soil freeze-thaw on the black land

Experimental measurement system based on CAN bus

Experimental Studies on the shear behavior of the PU material in the concrete's slot

Experimental study of mechanical performance of a new-style roof

Experimental study on heat pump integrating air conditioner and water heater with heat recovery of shower waste water

Experimental study on the seismic behavior of reinforced concrete short columns with high-strength longitudinal reinforcements

Explore on mould coordinated manufacturing based on Cloud Manufacturing

Fatigue performance of large stone asphalt mixtures for cement replacing mineral filler

Fault diagnosis of bearing oil whirl by Hilbert-Huang transmation

Finite element analysis of bonding connections between cold-formed steel Z sections

Finite element analysis of stability of the inverse T type breakwater with jackets and pile foundations

For the pressurized water on the coal-mining exploration review

FPGA-based design on control circuit of electricity-powered toy car

Fully-mechanized coalface periodic weighting analysis based on the SOS micro-seismic monitoring system

Fuzzy compensation control based on the synchronization error of 80MN titanium-alloy forging hydraulic press

Gravity distribution modulus calculation method of the belt conveyor with horizontal bend

Impact force analysis for ship-bridge collisions

Impermeability quality evaluation of rock mass

Influence of limestone powder on mechanical property of lightweight aggregate concrete

Influence of seepage on elastoplastic solutions of tunnels based on hyperbolic Mohr strength criterion

Influence of $Si/FeO^{2−}$ mol ratio on coagulation of poly-silicic-ferric coagulant from fly ash extract

Intelligent control of flywheel energy storage based on neural network

Investigation on densification of metal foam under dynamic loading

Laboratory experimental research and analysis on strength increasing trend of cement clays from shield work well of wuxi subway

Layout design for high strength steel automotive structural parts based on UG-PDW

Lesson from the development of domestic and foreign rural timber residence

Machine-calculation for driving hypoid gears of helix generating method

Mapping and valuating the wetlands ecosystem services in Huanghuaihai region

Measurement and allocation system for railway bearing

Mechanism study on vibration and noise reduction of circular saw with slots and filling material based on the theory of elastic wave

Method of manufacturing ceramic micro-features based on green machining

Modeling and simulation of a hydro-pneumatic spring based on internal characteristics

Modeling and simulation of directly facing the torque ripple compensation method

Modification of four-point bending test control system and development of laboratory asphalt mix fatigue prediction model

Multi-state program control parachute design and principle experiment

Multivariable method to analyze velocity of seismic wave

Node rigidity research of concrete filled steel tubular column to steel beam

Numerical analysis for load-bearing capacity of large-scaled molded pulp pallet

Numerical analysis of pile foundation in huge coal silo

Object recognition and centroid detection based on machine vision

On the seismic behavior of multi-story frame structure excited by near-fault ground motions

Optimization for high voltage porcelain insulators steel foot structural

Optimization of reinforcement design and construction sequence of double-curved arch bridge

Optimization of resources-constrained schedule for programme based on critical chain

Optimum design for beam-pumping unit based on chaos particle swarm optimization algorithm

Original design on the power transmission mechanism of a twin-rotor piston engine

Orthogonalization in electromagnetic protection

Overview of bridge structure damage criterion under seismic action

Performance experimental evaluation of compound modified asphalt by pyrophosphate and crumb rubber

Reconstruction of the village PPP project risk analysis and risk allocation

Repair welding of the crack on the large steel casting

Research and application based on PLC in electrical drainage stations' computer monitoring system

Research and application based on RK512 protocal in Impeller Coal Feeder

Research and design of ramcompressed rotor for rotary ramjet engine

Research and experiment on Affinity Propagation clustering algorithm

Research of acoustic characteristics and modal analysis of the muffler for steam trap

Research of critical displacement method for earthquake-induced landslides

Research of data mining of clustering analysis based on improved genetic algorithm

Research of deformation behavior of unloading soils

Research on automatic jump control of wrapper rolls base on CAN bus

Research on automotive chassis tuning

Research on braking energy regeneration of slewing mechanism in hybrid excavator

Research on concrete structure cracks with integrated basalt fiber repair and reinforcement method

Research on construction technology of cantilever expansion of some stage hall grid structure

Research on dynamic characteristics of sampling devices and its application

Research on manufacturing of a new bevel gear based on the three-axis CNC bevel gear machine

Research on newly silicone-acrylic emulsion for earthen sites consolidation

Research on order tracking and Teager-Huang transform based gear crack fault diagnosis

Research on reclamation and reuse of disuse automobile

Research on refining algorithm of information with equality constraints

Research on soil wetted front of gutter under water conservation in arbor-shrub-hedge-gutter

Research on the compensation of reactive power for wind farms on simulated Annealing's Particle Swarm Optimization Algorithm

Research on yaw moment control for light vehicle electromechanical brake system

Safety evaluation and feedback analysis of guide wall structure under flood discharge excitation

SiCp/Cu composites prepared by the dual-directional extrusion process of floating die

Simulation analysis of entropy generation of externally sweeping across tube hanks

Simulation and realization of Steer-by-Wire system

Simulation and test research on merge concreting at mass-concrete base slab of Nuclear Power Plant

Slope stability analysis of expansive soil considering the effect of rainfall

Spatio-temporal characteristics of friction torque of rolling bearing for space applications

Stabilization and tracking precision improved based on disturbance observer

Strengthening effect analysis of lightweight aggregate concrete restrained by steel tube

Stress analysis of high-strength bolts for steel box

Studies of fire prevention issues in exterior wall thermal insulation system

Study of available wind resources in the built environment

Study of the neural network constitutive models for turfy soil with different decomposition degree

Study on a new space pattern of gymnasium on natural ventilation and thermal comfort

Study on atomization and evaporation property of biodiesel

Study on combustion process estimation using frequency information of diesel engine vibration acceleration signal

Study on durability experiment of sub-sea tunnel grouting materials

Study on ecological compensation mechanism for urban drinking water source areas in Tibet

Study on optimal allocation of public service facilities in indemnificatory communities based on demand characteristics-a case study of Sigao Community in Shanghai

Study on planning strategy of residential district design based on local climate in Ganzhou city

Study on pulsed gas metal arc welding and its digital control strategy

Study on reinforced scheme of reinforced loess by triaxial tests

Study on self-organization of modular self-reconfigurable robot based on cellular automata

Study on the algorithm of increasing turning feedrate during continuous machining for multiple line segment trajectory

Study on the control system of piezoelectric ceramics micro-positioning stage

Study on the degradation of VOCs in a plasma-catalyst hybrid reactor

Study on the emergency system engineering construction scheme for the urban water supply in Dongguan city

Study on the environmental risk communication model for trans-boundary water pollution based on multi-agent

Study on the influence of parabolic-trough solar concentrator under snow load

Study on the influence regulations of noise on the curvature mode in damage detections

Study on the layout scheme of an ocean energy Isolated Power System

Study on the left-turn of non-power-driven vehicles at signalized intersection

Study on the relationship between rural road development and cultural change in the sociological vision

Study the relationship between the flow-ratio of air and solution (FRAS) and the dehumidify capability and optimize the FRAS in the solar dehumidification system

Survey on environmental awareness of small and mid-sized city residents and its influencing factor analysis

The 3-d numerical simulation analysis of internal forces and deformation which the large area long linear ultra deep excavation diaphragm wall is constructed used the covered back-digging method

The design and parameter setting methods for M-type fuzzy controller

The development of virtual test system of tool-angle measurement based on restraint under the environment of SolidWorks

The development planning of Railway Port Economic Zone in Loudi

The effect of floor structure on heat transfer of radiant floor heating system with air-source heat pump (ASHP)

The impact of forest cover degree of surface for runoff and geological environmental

The impact of pH on anaerobic phosphorus release from sludge

The influence of the structure of rotor cage bottom plates on the flow-field performance of O-Sepa classifier

The methods of compiling oval macro-program in turning operation

The model and experimental study for vibration control in Deep-hole Boring

The relation between city planning-construction and geological environment

The research and implementation of vehicle tracking system based on color histogram

The research of demarcation for bogie force-measuring frame of high-speed locomotive

The research on fuzzy PI self-setting control for Motor-type ELSD

The research on phenolic resin modified by nanoparticles and used for magnesite-carbon brick binder

The research on the energy-saving ways of the electric transmission on the bridge crane

The role of the ancient capital of Luoyang in the development of space form factors

The single closed-loop direct control of levitation force for bearingless permanent magnet synchronous motor

The stress and deformation analaysis of repair welding on the excavator bucket bandle

The study of large-scale campus planning methods

The study on phosphorus forms in central and southern distribution of Hongze lake

The study on standard of rock reference site

The thermal-mechanical coupling analysis of diesel engine cylinder head

Time lag effect in forecasting the amount of construction land

Dynamic failure of double deck spherical reticulated shell with imperfections

A new measuring method of friction losses of prestressed tendon in post-tensioning

A review on regional environmental risk study

A review on remediation of uranium-contanated environment

A study on the wrong way and countermeasure in the development of green building

A village landscape analysis based on the natural ecosystem

About influence of the spontaneous emission on the bistability of the VCSOA

An Analysis on the hydraulic resistance balance in the household horizontal heating system

An experimental study on the influence of curing temperature on autogenous shrinkage of high strength/performance concrete

Analysis of status quo, problems and potential about waste heat recovery of NSP cement production lines' exhaust gas

Analysis of strength reduction factor of RC frames

Analysis on deformation of diaphragm wall joints in soft soil

Analysis on evolutionary process of Liaohe Delta wetlands based on geographic information system (GIS) and remote sensing (RS)

Analyze of the society right structure behind significant pollution incidents — Gas blowout accident in Kaixian county of Chongqing as an example

Application of A/O+ refined diatomite strengthening process to treat sewage in small-sized cities and towns

Application of ecological retaining wall in slope engineering

Application of numerical simulation technology in withdrawal process in Suancigou Coal Mine

Application of Proteus software in MCU teaching

Application of the prestressed anchor and shotcrete technology in abutment strengthening works of highway bridge

Application of viscoelastic dampers system to super high building for control of wind-induced vibration

Based on different loading areas of steel structure framework simulation research of fire resistance performance

Climate simulation based on Star model

CMP pressure control based on dual-modes controller

Comparison and selection on scheme of tunnel construction under soft plastic-flow stratum

Control research on broken coal-wall and roof in the complex geological conditions

Correlation analysis of heavy metal content in the huai yam and the soil in huai yam planting areas of Wenxian

Damage identification of reinforced concrete beams

Database design and implementation based on GIS in slope engineering

Decalin dehydrogenation on active carbon supported Pt-Ni bimetallic catalysts

Decision-making of planning quantities based on discrete random qualified rate and rework success rate

Decolorization of acid red dyeing wastewater by Modified Bentonite-Chitosan Adsorbent

Degradation of PCB52 in Aqueous Solution by ultrasound/Fenton process

Design of wireless sensor networks for safety monitoring at civil engineering construction sites

Design on broad-band dual-layer microstrip antenna

Design on broadband multilayer parasitic microstrip array antenna

Desulfovibrio desulfuricans treatment of acid mine wastewater when the sodium lactate is as carbon source

Discussion of sewage sludge treatment on small towns in western China

Dynamic node routing and clustering of wireless sensor for mobile nodes in Internet of Things

Eco-hydrological study on restoration threshold of the Lhalu wetland

Ecological rehabilitation design of artificial river and seasonal variation of water quality In Tianjin airport economic area

Effect of heat treatment on thermal conductivity of 6063 aluminum alloy

Effect of the inlet configuration on the inner airflow distribution uniformity of the bag filter

Effect of the pH values on growth of Microcystis aeruginosa

Effect study of initial stress on bearing capacity of dumbbell-shaped CFST bridge

Effects of monosodium glutamate wastewater on yield and quality of tomato fruit, SOD, CAT, POD activities and MDA content in tomato leaves

Enantiomeric separations of neonicotinoid insecticides on a Chirobiotic V column by high-performance liquid chromatography

Establishment and implementation of large-scale heating networking district heating economic operations model

Estimating parameters of modified upgrade version three-parameters NHPP model

Evolution of dehydrogenase activity of activated sludge in biological contact oxidation process for treating photographic waste water

Experiment and analysis of the biological filter by falling water aeration

Experimental research on positive section' flexural performance of inorganic polymer reinforced concrete beam

Experimental research on progressive collapse performance of RC frame structures

Experimental research on stress-strain relationship of brick and motar in compression

Experimental study of garden waste and vegetable waste co-composting

Experimental study on application of saline water irrigation in north-west China

Experimental study on compressive strength of the red-bed soft rock highway tunnel's surrounding rock

Experimental study on Eisenia foetida activation of heavy metals (Pb,Cd) in residual sludge

Failure analysis of shrink fit tool chuck

Field experiments on triaxial mixing pile reinforcing the extra-deep starting and ending well of shield tunnel

Field testing study of deep soil displacement distribution during shield excavation

Finite element analysis on behavior of β=0.8 RHS trusses with concrete-filled in Partial chords

Fire resistance calculation of large span steel structure

Free-standing TiO2 nanotube arrays fabricated by anodization

Fuzzy comprehensive evaluation on slag-removal system plan selection in thermo-electricity project

FVM-based method to prediction of velocity of landslide

Ground source heat pump system reconstruction and analysis of technical feasibility

Group decision making in safety planning for earthquake disaster area reconstruction*

High-frequency sequence stratigraphy of carbonate and the corresponding shoal reservoir characteristics

Homer-dixon's environmental security theory: Analysis and enlightenments to the development and management of international rivers in China

Hydrogeochemical controls on fluorosis in the abandoned Yellow River flooding delta, East China

Hydrothermal liquefaction of corn straw under CO atmosphere: Effect of catalysts

Improved Genetic Algorithm for structure shape optimization design of mixed discrete variables

Improved method of tracking the maximum power point for photovoltaic system

In the construction of new countryside ecological landscape construction countermeasures

Industrial energy consumption forecast and carbon emissions accounting for Tianjin “12th Five-Year Plan”

Influence of HRT and temperature on treatment of micro-polluted river water by using integrated horizontal-flow constructed wetland

Land consolidation environmental influence retrospective evaluation of Guangxi

Large-eddy simulation of the flow behaviors of gas and particles in a riser

Luminescence characteristics for different compositions of organic matter in soil and sediment ozonation

Mechanical properties of clay under large shear displacement conditions

Mixed with lime powder on the performance test of autoclaved concrete

New method on assessment of membrane fouling potential -UMFI

Nonlinear analysis of the shear behavior of concrete beams pre-stressed with FRP tendons

Numerical analysis of rogue wave generation with boundary damping effects

Numerical implementation of pressure-dependent elasto-plastic cosserat continuum model in ABAQUS

Numerical simulation of dynamic ice action on cross-sea bridge foundation

Numerical simulation of vertical microphysical structure of a cold front precipitation cloud system

Numerical simulation of working performance for retaining structure with double-row piles

Numerical simulation research in soft rock mine of goaf caving height

Numerical simulation study on mine discharge of Xiyu coal mine in Taiyuan

Observable degree analysis of heavy-duty gas turbine based on svd method

On ecological flow influence of hydroelectric cascade development and compensating measures

On the application of foamed composites in building energy efficiency

Optimization research of anchor block cavity thickness in pre-stressed pier

Path stability analysis on shape adjustments for adaptive cable domes

Performance optimization of miller cycle apply on a natural gas engine

Performance-based design of smoke control strategy for an urban traffic tunnel fire

Point error research on fast calculating construction deformation observation control point based on Adobe Acrobat Software and CASIO program

Poles' effect on the qualities of a two-wheeled large-angle balancing mobile

Preliminary analysis of the effectiveness of desalting leaching using spring irrigation for use of brackish water for under-film drip irrigation of cotton

Preliminary experimental study on producing green building mortar by using recycled construction waste

Preparation of chitosan supported by modified bentonite and its discoloration with printing and dyeing wastewater

Preparation of K2O/ZrO2 catalyst and its Use in the synthesis of Di-2-ethylhexyl carbonate

Production of iminodiacetic acid by electrodeionization with bipolar membrane

Progress of unilateral contact buckling of steel skin sheet in composite wall

Real-time alarming of ship-collision accidents for bridges

Reaserch on the mathematical model of Rotating Electromagnetic Voltage Converter

Regional expression of modern architecture technology

Reliability inspection and identification for basement of a tall building

Removal of NOx using novel Fe-Mn-Ti compound catalysts at low temperature

Research and design of new home solar charge-discharge system

Research of ship structural system reliability considering fatigue-strength coupling

Research on common problem about quality in the system of exterior wall insulation

Research on correlation of sudden failure of aircraft with human-machine-environment

Research on effect of simultaneous nitrification denitrification under step-feed with three-stage catching bed reactor

Research on electromagnetic protection of mobile power station's generator

Research on fatigue mechanism and cracks propagation speed of the drill pipes used in coalmine

Research on green life cycle of mechanical product based on environment and resource

Research on hydrogen and oxygen isotope of leakage in branch construction tunnel of Tianhuangping Pumped-storage Station

Research on mechanism of increment reinforced subgrade bearing capacity

Research on modeling of human-machine hybrid production systems using CPN Tools

Research on preparation and properties of rapid adhesive for bonding raised pavement markers

Research on prestressed CFRP alarm sensors

Research on selection of prior distribution of Bayesian theory in hydrological uncertainty analysis

Research on the calculation method and dynamic modeling of traction-battery SOC for electric vehicle

Research on the characteristics of high-energy laser transmission in atmosphere

Research on the degradation of petroleum hydrocarbons on the effect of microbial activity in oil-contaminated sites

Research on the dynamic characteristics of the high-piled wharf considering soil-structure interaction

Research on the influence of soft interlayer to composite foundation

Research on the method of measuring the inertia moment of engine

Research on the removal of algae by inorganic-organic compound modified bentonite

Research progress and prospect of testing and application technology of highway snow-melting agent at home and abroad

Script files analysis and parameterization operation of GT-POWER

Simplified research on pier of simply-supported long bridge subjected to braking force

Simulation of prestressed concrete channel quality test by different electric heating method

Slenderness limit for hybrid FRP-concrete-steel double-skin tubular columns

Source apportionment and spatial-temporal variance of agricultural non-point source pollution in Chengdu, Sichuan Province

Spatial analysis of masonry building in earthquake

Statistic and analysis of specimens information of the national key protected wild plants in Hubei Province

Strategies to reduce carbon emissions of urban passenger transport

Structural damage identification based on information fusion technology

Studies on anti-dip layered rock mass high slope stability model test

Study based on operation by valve control for water distribution network

Study of automated point layout of radiological environment monitoring

Study of stability in surrounding rock masses and in-situ stress measurement for deeply buried metal mine

Study of the test of saturated soft soil under axial cycling loading and unloading and the constitutive equation

Study of the virtual reality smart simulation campus Based on Vega

Study of working properties of pile with branch plates based on Abaqus

Study on adsorption of molasses effluent by activated carbon

Study on effect of chemical deicing salt on soil salinity along highways in Shaanxi

Study on heavy metal contaminants in coal-mining area soil by gangue pile in the nature effloresce process at Cold and Arid Regions

Study on improvement in aerodynamic performance of Vertical Axis Wind Turbine using Gurney flap

Study on infiltration of Tianjin river systems in different typical years based on mapinfo

Study on Jatropha oil as a promising renewable lube base oil for bio-lubricant

Study on locally rennovation of mezzanine in R. C. structure

Study on permeability test and curve prediction of expansive soil

Study on photoelectrocatalysis humic acid of TiO2 films using micro-arc oxidation

Study on rainwater retention effect of an extensive green roof

Study on the accurate model of battery about rapid charger

Study on the construction method and deformation control technology of small interval cross tunnel in water-enriched soil layers

Study on the removal of $Pb^{2+}$ in water by γ-irradiation

Study on the shock response of typical plate and shell-support

Study on the strength of sea sand concrete introduced by chloride ions

Study on the tension in the geomembrane due to compaction work

Study on the theoretical system of green mining based on the scientific concept of development

Study on transcutaneous energy transmission system for heart pump

Test of post-fire bearing capacity of ceramsite concrete filled steel columns after exposure to fire

Test of post-fire bearing capacity of the circular steel tube with different coating

The analysis of the bearing capacity of scaffold used in the collar beam construction of Bao-Xi railway CFST arch bridge

The antiseismic energy dissipation safety factor of the reinforced concrete bridge piers based on the inverse deduction of the Park-Ang damage model

The application of MATLAB in the Moire method

The combined model of reliability analysis for stability in gravity dam

The design of the yaw control system for the MW generation set of wind power based on soft PLC

The development and prospect of biochar carbon sequestration based on agriculture and forestry resources in China

The development of smart power distribution system

The discussion on recyclable cultural buildings for exhibition in the creative Park

The ecological analysis of a new round land use planning based on ecological footprint in Guangxi

The effect of intake valve lift load control on gasoline engine fuel economy

The effect on methane emission by different soil enzyme activity in paddy soil

The engineering application and development direction of Recycled Concrete

The erosion hazards of red soil platform coast of Fujian province and its mechanism

The field measurement and analysis of freezing shaft lining pressure in special stratum of Inner Mongolia area

The geological hazards characteristics and engineering geology environment separating in Fushun city

The green mining of coal resource

The numerical simulation analysis of adjacent building vibration induced by urban subway transit

The numerical simulation of the spreading of oil spills

The operational ways to preserve traditional block in growing city

The path of the development of low-carbon economy in Nanchong

The practice on thermal stress and crack control in mass concrete base plate of large water conveyance pump station

The rebuilt of loft and the reuse of old industrial buildings

The research of DBD-corona discharge reactor and its atomization characteristics

The research of processing valve train dynamic data based on the wavelet packet analysis method

The research on the multi-layer survivability

The Review and Prospect of green space planning

The sewing performance research of industrial high-speed sewing machine based on performance-driven

The stability analysis of the protection pillar under railway coal mining

The study of targeting location of Qiqihar Nianzishan District tourism planning based on grounded theory

The test and study of Influencing the intensity of the solid excitant slag fly and ash Geopolymer

Theoretical analysis of the refrigerants for the moderate and high temperature water-source heat pump

Theoretical simulation and experimental study of phosphorus concentration profiles in laser doped crystalline silicon solar cells

Thermocouple sensor non-linearity compensation based on orthogonal polynomial basis functions neural network

Time sequence control of electromagnetic pulse simulator based

Variable fuzzy set model for evaluation of intergrity of pile foundation based on SPA

Visualization damage evaluation system research of structure in subsidence area based on GIS

Wetland area classification and accuracy evaluation of Poyang Lake based on remote sensing

Wind speed prediction based on Grey Markov model

Dynamic characteristics of a space structure composed of annular tensile cable-truss structure and single layer lattice shell

A dynamic burst detection model over data streams

A H-type microstrip slot antenna in Ku-band using LTCC technology with multiple layer substrates

A hydroelectric station intake construction simulation of high slope excavation

A kind of LC voltage-controlled oscillator based on centre-tapped inductance

A low-complexity IRA-LDPC coded noncoherent unitary space-time modulation system on Rayleigh flat fading channel

A method is proposed to optimize signal gain and noise for broadband FRA

A modified Krylov subspace model reduction method based on the Chebyshev polynomials

A new adaptive filtering acquisition scheme for PN code

A new structure of line traveling wave pump on magnetic fluid

A new synchronous decorrelating decision-feedback method in CDMA system

A novel design of an Electric Vehicle with lateral moving and in situ steering

A simple pendulum experiment for energy compensation automation

A study on the POD curve and initial crack size of steel truss bridge

All DPLLs based on fuzzy PI control algorithm

Alumina supported La, Co oxides and LaCoO3 perovskite: preparation and catalytic SO2 reduction by CO

Amelioraiton of triangle transport networks and its application

An experimental study on fatigue performance of T-shape RC beams strengthened with externally prestressed CFRP tendons

Analyses on control of water demand in an urban independent lake

Analysis of energy saving and emission reduction in coal industry

Analysis of loaded cavity by FDTD technique combining with sum algorithm and Padé approximation

Analysis of shear wall formwork burst in construction

Notice of RetractionAnalysis on fault identification of structure by magnetic impedance analysis method

Analysis on the coordinated development relationship between the oil and gas industry and the regional economy of Heilongjiang Province

Analytic solution of unstable state temperature field in asphalt pavement

Analyze relationship of rainfall-runoff through the distributed hydrological modeling

Application of chaotic ergodicity in image encryption and watermarking

Application of fuzzy predictive-PID control in temperature control system of Freeze-dryer for medicine material

Notice of RetractionApplication of grey system theory in detection of total station

Application of measurement technology of sound intensity in noise source identification of automotive interior noise

Application of mine electric method to probe mine water-conducting or water-bearing structures in potential under coal mining face floor

Calculation of groundwater use by natural vegetation in the non-irrigated plain areas in Xinjiang

Characteristic of combustion noise in a non-road diesel engine fueled with bio-diesel

Characterization of nickel-bismuth doped tin dioxide electrode

Notice of RetractionCity of Harbin Songbei wetland ecosystem functions and protection measures Prospects

Construction and installation technique of large-scale top-bearing bucket foundation for offshore wind turbine

Construction of dynamic feature semantic network based on model designed by feature

Contrastive analysis and test study of compaction standards used in China and Germany

Contribution rate of water-soluble polyacrylamide's COD and research of degradation bacterium's degradation behavior

Design and construction of intermediate tower's deepwater steel boxed cofferdam concurrently used as boring platform for Maanshan Changjiang River Highway Bridge

Design and develop of Multifunctional test-bed for in-wheel-motor

Design and kinematic analysis on vacuum-chuck automatic-grasping mechanism

Design for BIT of electronic system based on boundary scan

Design of dispersion-compensating fibers based on a hybrid photonic crystal fiber

Design of the equipment control strategies in central refrigerating station

Design of urban and rural water resources information management system based on Delphi

Design on the performance test development bench of high pressure valve class products

Determination of 2,4-DCP in ground water resource by solid phase microextraction and gas chromatography and ECD

Development of a particulate collection instrument for soil wind erosion in the near surface layer

Development of flexible three-dimensional machining force measurement and analysis system

Dielectric response of CaCu3Ti4O12 materials

Digitized occlusal reconstruction for dental prostheses

Discussion about the semi-active control for the electro-magnetism suspension and simulating to verify

Disposal engineering research and application progress of poultry wastewater

Distributed beamforming for source localization in wireless sensor networks

Dynamic behaviors analysis of concrete filled steel tube X-type arches bridge

Effect analysis after prohibition of pumping groundwater in Su-Xi-Chang area of China

Effect of stirring power on semisolid A356 alloy slurry prepared by low superheat pouring

Effectiveness research of oily gather sewage containing on Hydro Lysis-Acidizing-Bio-contact oxidizing treatment

Effects of micro-arc oxidation on the corrosion behaviors of magnesium alloy Mg-8.0Al-1.0Zn-1.0La

Elastic flexural-torsional buckling behavior of pre-twisted bar under axial pressure

Emergency treatment of phenol contamination in low temperature source water by powdered activated carbon

Enhance spectral efficiency using MEBPSK modulation

Environmental problems of Baiguishan Wetland Nature Reserve and the countermeasures

Evaluation of competitive capacity about regional mineral resources based on dynamic coordinated development

Experimental study on anti-carbonization performance of recycled high performance concrete

Experimental study on the effects of ambient pressure conditions on spray characteristics of water mist

Fast algorithm for matrix inversion in generalized predictive control

Fast VETSFD-TDFEM for 2-D electromagnetic scattering analysis

FD-TD analysis of bandwidth characteristics in the asymmetrical ridge rectangular waveguide

Feature analysis of industrial solid waste exchange's company in TEDA, Tianjin — A case study of industrial symbiosis in China

FEM analysis of treating expressway widening project with geocell

Flotation separation of Cu-Fe sulfide at low basicity for A Cu-Ag multi-metal ores

Fluent simulation of thermoacoustic effect

GPS location data reducing based on turning point judgment method

Harbin city wetland safety analysis and countermeasures

High-rise steel structure's performance-based fire protection design based on degree of probabilistic reliability

Hydrodynamic computation and numerical simulation on motion responses of three-dimensional planing boat

Identification of criteria analysis of the rights of ancient lights for constructions

Identification of seismic facies and its sedimentary facies prediction in DD block

IFDS operation mechanism and its implementation

Impedance mismatch theory and review of the blocking mass

Influence of bulking agents on speciation of heavy metals during sewage sludge composting

Influence of influent pH value on nitrite accumulation in a biological aerated filter (BAF)

Invasive PLA microneedle fabrication applied to drug delivery system

Inversion of geomagnetic north-pole using GPS signal and Klobuchar ionospheric algorithm

Investigate display means and spatial strategy of cultural heritage in Ruins Park

Luis Barragan and regionalism architecture

Maximal linear range of linear transformer analysis using maple & 1stopt

Microbial degradation and utilization of lignocellulosic biomass pyrolysis oil

Microwave transmission properties of conductive slabs

Modeling and optimization of acid chrome dark blue degradation by Fenton using Box-Behnken Response Surface Methodology

Movement analysis on materials flowing through a vertical pipe based on MATLAB

Nickel-based monolithic catalyst for tar cracking of biomass pyrolysis

Nonlinear backstepping sliding mode control for tank gun-control system

Nonlinear dynamics of composite laminated thin plate with 1∶2∶3 inner resonance

Novel design of a CMOS voltage-controlled oscillator with low phase noise and large tuning range

Numerical simulation of continuous extrusion forming of hollow copper conductor

Numerical simulation on temperature field in tunnel during seam steady smolder

Observation and dynamics of the tidal bore in the Qiantang River, China

On the cost estimation methods of college engineering based on BP neural network

On the existence of periodic orbits in the CR3BP

On the quick construction of all edge-balance index sets of the graph Cn×P7

Optimization design of testing center logistics on SLP

Phylogenetic analysis and Biodegradation characteristics of a kind of Normal foam agents degradation bacterium

Physical topology discovery algorithm based on SNMP

Practice of hydraulic tracking predictive test for the closure work of large project

Prediction model in correcting distortion for elevator guide rail base on FEM method

Preparation and characterization of activated pyrolytic tire char

Preparation and characterization of hollow micro-spheres alumina carrier with honeycomb structure

Pressure signal wireless transmission system for dense pastes transportation pipeline

Prevention and control for water hazard in Fenxiao coal mine

Principles of an in-process monitoring system for precision grinding machine

Quantitative analysis on stability for deep foundation pit support structure

Relay node selection and game theory-based power allocation in the cooperative networks

Research for the stability of PV trestle rooted in the land without groundsill in hohhot

Research of Active Disturbance Rejection Controller in speed regulation of induction motor

Research on ANN-based feature recognition and manufacturing behavior sequence

Research on C-function cutter radius compensation of irregular curves milling in polar coordination

Research on channel-base current of lightning return stroke

Research on collaborative reasoning for distributed reasoner

Research on cost-system and algorithm of residential construction products based on emergy analysis

Research on evaluation of groundwater resources and the problems by its development and use in Sanjiang low Plain

Research on Fingerprint image preprocessing and thinning

Research on hydrodynamic characteristic of supercavitating vehicle in vibrational state

Research on microstructure in semisolid A356-Sc alloy

Notice of RetractionResearch on modernization elements of exhibition centers

Research on modularity fitness degree of mechanical product

Research on NOx formation of flat-flame combustion with HTAC Technology

Research on state estimation of regional power grid based on improved least squares method

Research on the civilians' renovation investigation of urban open space baseon PVEE theory

Research on the forming technique and surface treatment process of quartz glass bulbs for arc tubes

Research on the pit lake water in an abandoned oil shale goaf

Research on the reliability of underground coal mine belt conveyor system

Research on the residual problem of delisting construction enterprises

Research on web process model for dynamic binding

Safety analysis of high and long-span structure formwork supporting system of fastener-style steel pipe

Screening of 4 dominant strains and their condition of degrading pollutants from cooking fume

Security issues of topology discovery in wireless sensor networks

Segmentation of liver tumor with local C-V level set

Separation efficiency research on oil-water coalescence using Frequency pulse electromagnetic waves technology

Similar simulation experimental investigation on the deformation and failure character of the stope pillar of gently inclined and medium thick phosphate rock under pillar and room caving

Similar simulation experimental investigation on the stability of the stope roof of gently inclined medium thick phosphate rock under the ming of cemented backfilling of waste rock

Simulation and design of broadband circular polarization stacked patch antenna in LTCC technology

Simulation study of Electrical Capacitance Tomography

Smart grid interoperability model

Soil microbial biomass carbon, nitrogen and nitrogen mineralization of grazing intensity response

Solution of complex characteristic equation of LPFG sensors coated with complex refractive index double-layer films

Sprayed concrete construction technology applications in bridge reinforcement

Study of a new shoulder-type electric brush cutter

Study of cone NC sheet metal incremental forming

Study of IC slabs reinforcement by transversal prestressing tension

Study on abrasion resistance mechanism of concrete and rotating-jet mode concrete abrasion resistance performance testing machine

Study on application model of three-tiered architecture

Study on change law of the inner texture of the square truncated cone in NC incremental forming

Study on correlation between food consumption and discharge of domestic pollutants in urban area

Study on design method of boundary-scan circuit architecture based on Verilog language

Study on green business process management system of small and medium real estate enterprise

Study on remediation of acidified soil using chemical modification agents

Study on stress and strain and characteristics of acoustic emission in the process of rock failure

Study on the comparation of the removal of nickel in wastewater with different absorption materials

Study on the comparison between ultrafiltration pretreatment without any chemicals and with coagulation in seawater desalination

Study on the continuous dehydration of super heavy oil

Study on the creep characteristic and model of overgrown joint rock

Study on the effects of the bent-height on the seismic performance of the aqueduct-water coupling structure

Study on the evaporation of High Salinity Oily Water

Study on the impact of rock and soil properties on pre-stressed cable's anchoring force loss

Study the impact of 9310 working face mining on −670 water sump

The analysis of friction welding process of turbocharger impeller and the shaft

The application of Chaotic masking and chaotic switching in communication

The application of common DC bus-bar in variable frequency AC speed-adjusting system

The application of GPRS remote wireless automatic monitoring system to Health Monitoring in Guangdong Science Center

The application of LCC technology in hyperstatic hydraulic support

The application of ultrasonic flowmeter on trade measurement in Yulin gas field

The CBM Recovery factor prediction of PanZhuang area in QinShui basion

The design and dynamics analysis of trajectory correction actuator with canard

The design for data collection terminal based on 32-bit Atmel

The design of automatic servo mechanism for the density of the weft knitted fabric high-precision vision measuring system

The design of control system for SZ-40 injection molding machine base on PLC

The development of 6 DOF driving simulation system

The effect of oxides doping on the desulfurization performances of Fe2O3/AC catalyst

The energy consumption monitoring platform design for large-scale industry users based on the GPRS

The frequency scaling ratio factor of rain attenuation in Ka waveband along earth-space path in China

The GPS-RTK satellite positioning technology and its application in construction of large scale bridge

The improvement of automobile-use lifter transmission shaft parameter

The relationship between the derivative of LEMP in near-field on the surface of ground and that of channel-base current of lightning return stroke

The reliability of CFRP strengthened Two-way slab with Monte Carlo method based on Matlab

The scattering property of small anisotropic dielectric ellipsoids

The simulation study of the maximum learning incremental worker-station assignment based on learning- forgetting

The study of film's local vacancy defect effects on the thermal conductivities of argon thin films

The study of polymeric Al/Fe modified zeolite as adsorbents for Cr(III) removal in water treatment

The study on the damped vibration of a strongly cubic nonlinear oscillator

The study on the effect of commercial space under the plan and construction of rail transport in the mountainous cities

The theory and practice discussion of compiling flexible talents training scheme in engineering management

Unoil effectiveness research of setting tank on Oily sewage using Air Flotation

Using the IOT to construct ubiquitous learning environment

Vibration analysis of multi-DIM vibration absorber based on parallel mechanism

Visual evaluation system for straightness error based on LabVIEW

2010 International Conference on Mechanic Automation and Control Engineering

Theoretical study on characteristics of clipping for different layered structure

Content Provider	IEEE Xplore Digital Library
Author	Guangfa Gao Yongchi Li Haichun Ma Ping Li
Copyright Year	2011
Description	Author affiliation: School of Energy and Safety, Anhui University of Science and Technology, Huainan, China (Guangfa Gao) \|\| Department of Modern Mechanics, University of Science and Technology of China, Hefei, China (Yongchi Li; Haichun Ma; Ping Li)
Abstract	Based on the classification and analysis for different layered structures and layered materials, the characteristics of clipping of them were deep systematically analyzed in theory. The relation between layout and effectivity of them was discussed after being compared, and the laws of relatively effective layout were presented. The conclusion of the study may be helpful for designing the layered structures or layered materials in design of protective engineering and impact-resistance materials.
Starting Page	3729
Ending Page	3732
File Size	278449
Page Count	4
File Format	PDF
ISBN	9781424494361
e-ISBN	9781424494392
DOI	10.1109/MACE.2011.5987806
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2011-07-15
Publisher Place	China
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Vibrations Stress wave Layout Vibration and Wave Materials Attenuation Clipping Layered structure Stress Layered Material
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in