NDLI: Advanced modular communication concepts for data logging and conditioning in photovoltaic inverter systems

Please wait, while we are loading the content...

2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe)

2014 16th European Conference on Power Electronics and Applications

2013 15th European Conference on Power Electronics and Applications (EPE)

Proceedings of the 2011 14th European Conference on Power Electronics and Applications

2009 13th European Conference on Power Electronics and Applications

2007 European Conference on Power Electronics and Applications

Harmonic draining transformer-coupled boost-type rectifier systems with sinusoidal input currents

A five-level inverter scheme with common-mode voltage elimination by cascading conventional two-level and three-level NPC inverters for an induction motor drive

High efficiency control methods for class-E resonant converter for step-down applications using Piezoelectric Transformers (PT)

Universities collaboration in teaching power electronics

Multi-interleaved zero-ripple VRM to power future microprocessors

A simple feedback for parallel operation of current controlled inverters involved in UPS

A new structure of a switching flux synchronous polyphased machine with hybrid excitation

General aspects of the electrical drive systems optimal control

Additional application fields of a modern wind generator even at no-wind

DC-reactor-less hybrid DC-DC converter with a core composed of four legs

A novel space vector modulation control strategy for three-leg four-wire voltage source inverters

EPE 2007 Aalborg, Denmark 2-5 September 2007

An online control strategy for a modular DC coupled hybrid power system

Dynamic characterization of power converters for distributed power supply

Design and implementation of a fuzzy controller for wind generators performance optimisation

A single sensor type MPPT control method for PV generation systems

Predicting the influence of placement of passive components on EMI behaviour

EPS system analysis using multi domain simulation for conventional 12V power network design in a vehicle

Speed measurement and estimation algorithms in AC Induction Motors

New algorithm for grid synchronization based on Fourier series

Three phase current source auxiliary resonant commutated pole inverter using IGBTs

Efficient scheduler-dispatcher software architecture of the spacepower facility distributed control computer

Design of avalanche capability of Power MOSFETs by device simulation

Matrix converter with advanced control for contactless energy transmission

A mathematical description of control method on the basis of difference correction

Impact of power quality disturbances on PV inverters 7#x2014; performance of integrated protective functions

Control system simulation of a 40 kW half-bridge isolated DC/DC converter

Comparing piezoelectric transformer working with PLL and with nonlinear load approaches in DC-DC converter

ESBT® power switch in high-power high-voltage converters

Direct torque control using space vector modulation and dynamic performance of the drive, via a fuzzy logic controller for speed regulation

High efficiency, high reliability 2 kW inverter for aeronautical application

Robustness and turn-off losses of high voltage IGBT

FACTS for dynamic load balancing and voltage support in rail traction

Reduction of common mode currents generated by three-level inverters with consideration of motor overvoltages

Real-time performance testing of a 3Φ VS WM inverter-fed induction motor

An adaptive hysteresis current control for a multilevel inverter used in an active power filter

Construction of a hybrid electrical racing kart as a student project

Test bench for the simulation of a hybrid power train

Potentials for reducing the power requirement of magnetic suspension systems by implementing a linear quadratic gaussian controller

Sensorless operation of the switched reluctance machine

Earth-fault protection of VLT® automationdrive FC 301

Development of a 1.2MVA active front end using parallel industrial units

Control and energy management of a wind-photovoltaic hybrid system

Core losses measurements in intercell transformers for interleaved converters

Magnet power converters for the new booster of elettra

A two-motor centre-driven winder drive fed by a five-leg voltage source inverter

Voltage and current ripple considerations for improving ultra-capacitor lifetime while charging with switch mode converters

Optimized destabilizing islanding protection scheme for grid-tied inverters insensitive to short term network disturbances

A less sensor control method of PMSM using a hall sensor

Synchronous balanced control of cascaded two-level inverters with separated DC sources

Inverter topology comparison for remedial solution in transistor faulty case

Investigation on power supply operation for the helias stellarator fusion reactor

Performance characteristics of the reduced common mode voltage near state PWM method

FPGA based sequential switching control strategy for a three phase inverter

Study of SMES system using dry type superconducting coil designed to protect from momentary voltage drop

A non-isolated interleaved ZVT boost converter with high step-up conversion derived from its isolated counterpart

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

An isolated interleaved active-clamp ZVT flyback-boost converter with coupled inductors

Robust DTC-SVM method for matrix converter drives with model reference adaptive control scheme

Photovoltaic power system with simplified cascade boost choppers

A new on-line approach for determining conducting angles in a multilevel cascaded inverter

A comparative study of steady-state characteristics of permanentmagnet synchronous generator systems

Numerical analyses of minimum energy operation of multiple trains under DC power feeding circuit

Impact of remote sensing on converter stability and performance

Influences of magnetic inductance, leakage inductance and saturable inductance on an active clamp forward converter

Envelope model for resonant converters and application in LLC converters

Design of robust PID controllers for PMSM drive with uncertain load parameter

The bidirectional Z-source inverter for energy storage application

Comparative study of the optimal number of phases for interleaved Voltage regulator modules

Analysis of a DSP-system in order to flexibly control a switch mode power supply

New space voltage vector modulation inverter based on FPGA considering voltage saturation for speed servo system of induction motor

One-phase reluctance generators in low-power wind plants

Preliminary experimental evaluation on PT-IGBT in parallel connection

A novel soft-switching bridgeless power factor correction circuit

Control model of a closed loop power-controlled series-type resonant induction heating system

Novel analytical calculation method for the non-linear Ѱ -і- characteristic of switched-reluctance-machines in arbitrary rotor positions

Analysis and compensation methods of dead-time effects in a PWM AC chopper

Sensorless control of PMSM based on extended kalman filter

Analysis and calibration of a high precision AD converter

Lagrange’s energy method based approach for switched reluctance drive systems modelling

Influence of voltage vectors of a NPC inverter on torque and flux variations of a DTC drive considering different load and speed conditions

Multi-level converter dimensioning with structure and losses consideration for DFACTS applications

Control of doubly-fed induction generators under asymmetrical grid conditions

High-resolution phase shift and digital implementation of a fuel cell powered UPS system

Low stand by power, self oscillating power supply

Stability of DC link with reduced energy storage for regenerative synchronous drive - Analytical approach

Dual-inductive snubber circuit design for three-level inverter

A new stacked NPC converter: 3L-topology and control

Comparison of active stabilization methods for the doubly-fed induction generator - quadrature versus direct inner control loops

state control of an electromagnetic guiding system for ropeless elevators

Performance enhancement and comparison of discrete time current regulators for parallel active filters

Control of grid connected AC-DC converters with minimized DC link capacitance under unbalanced grid voltage condition

Algorithm evaluation for the optimal selection of the space vector voltage using DPC in power systems

A control algorithm for power converters in the field of photovoltaic applications

600kJ high temperature SMES-based sag compensator

A redundant electrical braking system for wind turbine generators

Comparative study of IPMSM control strategies for torque ripple reduction

Predictive direct torque control of an induction motor fed by a matrix converter

The automotive system simulation by using multi domain modeling technique

A study on the reactor parameter of atmosphere plasma power supply

Characteristics of a novel switched reluctance motor having permanent magnets between the stator pole-tips

Fuel cell powered railway vehicle and experimental test results

Carrier PWM algorithm for multileg multilevel inverter

Diode-assisted buck-boost voltage source inverters

Analysis of carrier pwm method for common mode elimination in multilevel inverters

Novel sensorless control for pm synchronous motors based on maximum torque control frame

Operational analysis and modulation control of three-level Z-source inverters with enhanced output waveform quality

Predictive direct power control of MV-grid-connected two-level and, three-level npc converters: experimental results

Induction generator model in phase coordinates for fault ride-through capability studies of wind turbines

A new 7.2kV medium voltage 3-Level-NPC inverter using 6.5kV-IGBTs

A new low-cost motion control educational equipment

A cascaded H-bridge BLDC drive incorporating battery management

Convergence test of model reference signal adaptive SRM drives

A new electromagnetic model for PM synchronous machines

A high power density converter system for the Gamesa G10x 4,5 MW wind turbine

Modular pulsed generator for kV and kHz applications based on forward converters association

Three-level converter based active filter for harmonic compensation of 4MW induction furnace

Supercapacitors and battery power management for hybrid vehicle applications using multi boost and full bridge converters

A back to back multilevel converter for driving low inductance brushless AC machines

Inverter power sizing considerations in grid-connected PV systems

Parallel-connected converters for optimizing efficiency, reliability and grid harmonics in a wind turbine

A buck-boost bidirectional converter to drive piezoelectric actuators

Power-factor control of the LCC current-output resonant converter

Design of an LCC current-output resonant converter for use as a constant current source

Resonant converter, DC power supply, Soft switching, ZVS converters novel adaptive flux observer for wide speed range sensorless control of induction motor

Comparison of methods for the analysis of the parallel resonant converter with capacitive output filter

Control method and snubber selection for a 5 MW wind turbine single active bridge DC/DC converter

Real-time compact electronic thermal modelling for health monitoring

A current-mode controlled maximum power point tracking converter for building integrated photovoltaics

Two rotors designs’ comparison of permanent magnet brushless synchronous motor for an electric power steering application

Sliding mode control of a doubly-fed induction generator

An accurate evaluation of electric discharge machining bearings currents in inverter-driven induction motors

Transformerless topologies for future stationary AC-railway power supply

Industrial D-STATCOM chain link modelling and control

Research and test platform for hybrid electric vehicle with the super capacitor based energy storage

Energy management and sizing of a hybrid locomotive

Method of identifying voltage difference of super capacitors and principle of voltage balancing

Configuration and verification of the super capacitor based energy storage as peak power unit in hybrid electric vehicles

An education and research prototyping platform for switched reluctance motor drives

High temperature behaviours of aluminium nitride

Feed-forward control of non-linear inductors providing soft-switching of DC-DC-converters

A hybrid, physical-behavioral fluorescent lamp model suitable for use in Spice and Simulink

Increase pedestrian safety by critical crossroads: lighting measurements and analysis

Power energy meter in a low cost hardware/software

Simplified drive system models for power system transient studies in industrial plants

Fast on-line symmetrical components separation method for synchronization and control purposes in three phase distributed power generation systems.

A new architecture for offshore wind farms

A variable frequency high-voltage power supply for hot-restrike modelling of HID lamps

Design approach of newly developed 3.3kV IGBT modules

Design of brushless DC motor for air management system of fuel cell modules

A simple induction motor parameter estimation method for vector control

Study and simulation of the energy balance of an urban transportation network

New flux weakening control for high saliency interior permanent magnet synchronous machine without any tables

High current capacitor discharge power converters for the magnetic lenses of a neutrino beam facility

Analysis of stator voltage observers for a doubly fed induction generator

Determination of the feedback capacity of a low voltage trench gate MOSFET from dynamic measurements

The modern approach to practical trainings for specialists of automatics

Loss calculation of a frequency converter with a fixed-step circuit simulator

Performance characteristics of a practical scale wind turbine generating system using a shaft generator system

Modelling & control of a bidirectional converter for a standalone photovoltaic power plant

On-line phase measurements in switched reluctance motor drives

Simulation model based control development of a multifunctional PV-inverter

Analytical model describing the operation behaviour of transverse flux machines in flat magnet configuration

Selective harmonic current mitigation with shunt active power filter

Active damping of LCL resonance with minimum sensor effort by means of a digital infinite impulse response filter

High performance cooling system for automotive inverters

Position control of a transverse flux motor with reduced torque ripples for direct servo-drive applications using shaped currents with harmonics control

Position control of a transverse flux motor with reduced torque ripples for direct servo-drive applications using shaped currents with harmonics control

Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay

New compensation method of unbalanced 3-phase voltage supply in soft- starter for induction motors

A software simulation program for a hybrid fuel cell - battery power supply for an electric forklift

Low EMI noise techniques of the $6^{th}$ generation IGBT module

Direct torque control for interior permanent magnet synchronous motors with respect to optimal efficiency

Evaluation of silicon carbide devices for hybrid vehicle drives

Core loss model for nanocrystalline cores for full and half bridge waveforms

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

Advantages of 3-stage-DC/DC-converters for Server Switch Mode Power Supply (SMPS) applications

A novel control algorithm of a three-phase PWM inverter with output LC filter

Multilevel converters for UPS applications: comparison and implementation.

Space vector modulation of nine-phase voltage source inverters based on three-phase decomposition

Anti-slip re-adhesion control based on disturbance observer considering bogie vibration

Next generation of IGBT-modules applied to high power traction

Energy generation system behaviour using a clocked fuzzy peak current control

Measurements of HF current propagation to low voltage grid through frequency converter

Intelligent bidirectional power switch module for matrix converter applications

WINDFACT®, a solution for the grid code compliance of the windfarms in operation

Experimental setup for measuring the local temperature of active electronic components

Three-phase inverter with output LC filter using predictive control for UPS applications

A high voltage pulsed power supply with magnetic switch for ESP

EPE 2007 Aalborg, Denmark 2 - 5 September 2007

Modulation method for the three-level-output-stage matrix converter under balanced and unbalanced supply condition

Output maximization of wind generation system using sensorless controlled IPMSG

Long life ups based on active filter and flywheel without electrolytic capacitor

Buck-boost impedance networks

Design and experimental investigation of a magnetically suspended rotary table

Traction power converter for PEM fuel cell multi-stack generator used in urban transportation

A selective harmonic elimination system for restoring and equalising DC link voltages in a multilevel active rectifier

A performance oriented wind turbine model for grid stability studies

Friction compensation for a robust, low order H∞-optimal position control of a multi-mass system

Optimal operation of a single phase converter by switching frequency changes

A novel 60 MW pulsed power system based on capacitive energy storage for particle accelerators

A novel vector controlled current source shunt active power filter and its comparison with a traditional topology

Energy storage system with ultracaps on board of railway vehicles

A novel high channel density trench power MOSFETs design by asymmetric wing-cell structure

Optimization of soft-switched flying capacitor multi-level converters applied to STATCOMs

Analysis of stability for networks including converters

Parallel operation of thyristor- and IGBT-based HVDC

Fully FPGA-based system on chip solution for current control of AC machine.

Failure models in power device interconnects

Electric power divider of hybrid car propulsion systems

Active snubber circuit for source commutated converters utilizing the IGBT in the linear region

Experimental studies on fault current limiter by voltage source inverter with line voltage harmonics compensation

A simple design method based on vector control of AC machines with LC filter

A direct predictive control of shunt active power filters using multicell converter

Zeta DC/DC converter used as led lamp drive

Microcontroller-based quadratic buck converter used as led lamp driver

Three-phase multi-level PWM rectifier multi-carrier discontinuous voltage modulation strategy

Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating

Short-circuit faults in distributed and concentrated windings of PM synchronous motors

Analysis and implementation of a 2-degree of freedom control for a three-phase induction machine

Novel 3-phase phase-locked loop composed of adaptive linear combiner

Sensorless control of SRM using position observer

Five-phase inverter modulation strategy for high performance motor drives: analysis of the voltage limit

Adjustment, measurement and on-line detection of air gap asymmetry in AC machines

Redundant Drive with Direct Torque Control (DTC) and dual-star synchronous machine, simulations and verification

A comparison of SPSA method and compact genetic algorithm for the optimization of induction motor position control

Physical dynamic modelling and systematic control structure design of a double linear drive moving gantry stage industrial robot

Electric bicycle using batteries and supercapacitors

Digital compensation of a high-frequency voltage - mode DC-DC converter

Advanced modular communication concepts for data logging and conditioning in photovoltaic inverter systems

New self-switching mechanisms for active bidirectional switches

Poles position identification of permanent magnet axial flux motor using PIPCRM sensorless method.

Modified sliding mode controller for positioning of micro linear motors

Control unit for a laboratory motor test bench for monitoring and controlling PMSM and induction motors

A 4-quadrant 300kW-peak high precision and bandwidth switch mode power converter for particle accelerator magnets supply

Ageing Test Results of low voltage MOSFET Modules for electrical vehicles

A new FPGA based control system for electrical propulsion with electronic differential

Real-time simulation of finite-element analysis permanent magnet synchronous machine drives on a FPGA card

Introduction and evaluation of novel multi-level carrier-based PWM strategies using a generalized algorithm

Bi-directional DC-DC converters for supercapacitor based energy buffer for electrical gen-sets

A novel nine-switch PWM rectifier-inverter topology for three-phase UPS applications

High performances supercapacitor recovery system including Power Factor Correction (PFC) for elevators

Single-phase hybrid transformer using matrix-reactance chopper with Ćuk topology

Two examples of pedagogical applications of electrical go-karts

Output voltage control of a four-leg inverter based three-phase UPS

Efficient control method of switched reluctance motor using direct neighboring phase torque distribution technique

Sensorless control of hybrid stepper motor

A New FACTS component — Distributed Power Flow Controller (DPFC)

Design of PM integrated motor-drive system for axial pumps

Digital control of a three-phase four-leg inverter under unbalanced voltage conditions

Base-plate solder reliability study of IGBT modules for aeronautical application

Output voltage distortion compensation for half-bridge inverters

A simple photovoltaic simulator for testing of power electronics

Dynamic analysis of hybrid DC-DC converters

Modeling of common mode conducted noise emissions in PWM inverter - fed AC motor drive systems

Digital closed-loop high-speed thyristor firing system for line-commutated converters

Phase-controlled line-commutated converter control in discontinuous conduction mode

An improved power electronics training platform using PIC microcontrollers

Optimization of combined thermal and electrical behavior of power converters using multi-objective genetic algorithms

Comparison of stress distributions and failure modes during thermal cycling and power cycling on high power IGBT modules

Fast connection /reconnection of the VSC to the power network

Contribution to the stress grading in integrated power modules

Robust performance of self-scheduled LPV control of doubly-fed induction generator in wind energy conversion systems

VHDL-AMS model of IGBT for electro-thermal simulation

A simple indirect voltage sensing method for line-connected inverters

Wind generation stabilization using a hydrogen buffer

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

Electromagnetic analysis of the induction motor with spiral sheet rotor

Current demand of high performance inverters for renewable energy systems

Feasible series compensation applications using Magnetic Energy Recovery Switch (MERS)

EPE 2007 Aalborg, Denmark 2 - 5 September 2007

Theoretical analysis of cancellation of DC-link current harmonics in the inverter-controlled DC electric railcar

Position sensorless control of permanent magnet synchronous motor at low speed range using harmonic voltage injection

Exercise bike powered electric generator for fitness club appliances

Thermal runaway evaluation for high temperature TRIACS

The BTF (Beam Transfer Facility) DC/Pulsed 50 kW power converter for DAΦNE injector

1.2 kV Rectifiers Thermal Behaviour: comparison between Si PiN, 4H-SiC Schottky and JBS diodes

Evaluation of three-phase transformerless photovoltaic inverter topologies

Integrated propulsion and auxiliary supply systems for multi-system operation

Comparison of direct resonant converter topologies for high power RF applications

Modulation strategies for a mutually commutated converter system in wind farms

A multi-pulse diode rectifier with a coupled three-phase reactor and additional small shunt active power filter

Test bench for grid code simulations for multi-MW wind turbines

Inverter excited induction machine for high performance wind power generation system

Digital speed control system for a motor using two speed detection methods of an incremental encoder

Stationary frame voltage harmonic controller for standalone power generation

600V SOI Gate Driver IC with advanced level shifter concepts for medium and high power applications

Centralized supervision of reactive power generation for a wind farm

Novel motion sensorless control of stand alone Permanent Magnet Synchronous Generator (PMSG): harmonics and negative sequence voltage compensation under nonlinear load

Torsional dynamics of generator-units during autonomous operation

Turn-off failure mechanism analysis of Punch Through Trench IGBT under clamped inductive switching operation

Power stage for permanent magnet synchronous motors in high current automotive applications

A novel control method for direct interface converters used for DC and AC power supplies

Contactless planar actuator with manipulator

Balanced grid currents in three-level voltage-source inverters connected to the utility under distorted condition using symmetrical components and linear quadratic regulator

An approach to building more compact power electronic converters

New field weakening strategy for AC machine drives for light traction vehicles

On the properties of full-order observers for sensorless induction motor drives

Modeling the space elevator - a project oriented approach for teaching experimental power electronics

Stability analysis of converter-grid interaction using the converter input admittance

Design considerations of a voltage-fed full bridge DC-DC converter with high voltage gain for fuel cell applications

An experimentally verified compact transient electro-thermal modeling procedure for power modules

Novel voltage balancing technique for series connection of IGBTs

High temperature characterization of SiC-JFET and modelling

Design and control of a fuel cell DC/DC

Grid frequency control design for offshore wind farms with naturally commutated HVDC link connection

Implementation of dynamically reconfigurable control structures on a single FPGA platform

Class-D amplifier for automotive and public audition applications

Gate driver with feed forward control of turn off performances of an IGBT in short circuit conditions

Virtual laboratory for combined solar energy system

Optimal direct-drive permanent magnet wind generator systems for different rated wind speeds

Hybrid cycloconverters: An exploration of benefits

Contribution of energy storage systems for power generation and demand balancing with increasing integration of renewable sources: application to the Portuguese power system

Induction machines fault simulation based on FEM modelling

Fault detection in induction machines by using continuous and discrete wavelet decomposition

Four-leg parallel Z-source inverter based DG systems to enhance the grid performance under unbalanced conditions

DC-link voltage balancing algorithm using a space-vector hysteresis current control for three-level VSI applied for wind conversion system

Development of a single-stage three-phase PV module integrated converter

A novel high DC voltage generator by LC resonance in supply frequency

Dynamic iron loss measurement method for an AC filter inductor on a PWM inverter

CRA based robust digital controller for a single phase UPS inverter

200KV pulse power supply implementation

Energy consumption analysis of FC-EDLC hybrid railway vehicle by dynamic programming

Influence of power semiconductor and power supply design on EMC relevant emissions by the example of an arc welding inverter arrangement

Nonlinear dynamics in direct torque controlled induction machines analyzed by recurrence plots

50kVA Regenerative Active load for power test system

Performance evaluation of buck-boost three-level inverters with topological and modulation development

Digitalizing gate control of high efficiency, high frequency and high power chopper circuit SAZZ using FPGA

On the simulation of valve reactors

Benefits of system-oriented IGBT module design for high power inverters

Precise digital control method with sinusoid based model for single phase utility interactive inverter with FPGA based hardware controller

Variable sampling quasi multirate deadbeat control method for PWM Inverter in low carrier frequency

Comparison of DC-DC-converter architectures of power management circuits for thermoelectric generators

PWM rectifier with LCL-filter using different current control structures

Doubly Fed Induction Machine speed drive for hydro-electric power station

Hermetic packaging for power multichip modules

A simple excitation position detection method for sensorless SRM drive

An encoder-free grid synchronization method for a Doubly-fed Induction Generator

Extended EMF- and parameter observer for sensorless controlled PMSM-machines at low speed

Fault-tolerant inverter for on-board aircraft EHA

A new topology for PV DC/DC converter with high efficiency under wide load range

Comparison of 3D-SVPWM and Carrier-Based PWM of three-phase four-leg voltage source inverter

Comparison of signal injection methods for sensorless control of PMSM at very low speeds

Modeling and simulation of variable speed wind generator system using boost converter of permanent magnet synchronous generator

Indirect Maximum Torque per Ampere control of induction motor drives

Design and comparison of full-size converters for large variable-speed wind turbines

Multi-domain simulation platform for virtual prototyping of integrated power systems.

A novel Parallel Active Filter for Current Pulsation Smoothing on single stage grid-connected AC-PV modules

Optimal Operation of Induction Motor Drives

Single-phase current-source active rectifier for traction applications: new control strategy based on phase shift controller

Analysis of frame alignment issues in natural field orientation including non-linear and leakage inductance effects

Comparison of Si- and SiC-powerdiodes in 100A-modules

Stability analysis of the Instantaneous Power Control (IPC) algorithm for induction machines

Simulation results of novel energy storage equipment series-connected to the traction inverter

Distributed generation power inverters as shunt active power filters for losses minimization in the distribution network

Nonlinear adaptive control of magnetic bearings

Reduction of magnetic field strength on PCB level laboratory for power electronics students

Evaluation of the iron loss of an inductor based on dynamic minor characteristics

A physics-based power diode model optimized through experiment based parameter extraction

Robust speed and position control based on neural and fuzzy techniques

ZVS-ZCS full-bridge DC-DC converter for voltage step-up in fuel cell distributed generation systems

Implementation of supercapacitors in uninterruptible power supplies

Demodulation methods on fully FPGA-based system for resolver signals treatment

A novel topology with high efficiency with high efficiency for grid connected photovoltaic PCS

Full solid-state pulsed power supplies for injection/extraction at SOLEIL

A New soft switching multi-output forward converter with independent and precise regulation

Recent developments in IGCT gate units

Design of the DC and AC magnet power supplies for the soleil synchrotron radiation source

The system simulation for small size and ultra-high speed motor drive system using coupled analysis

Integrated design procedure for printed circuit board inductors in DC-to- DC converters

Analysis of the base current and saturation voltage in 4H-SiC power BJTs

Accurate initial pole-position estimation of surface PM-LSM in the position control

Medium frequency topology in railway applications

Concept of novel CVD diamond high voltage, high power and study of ohmic contacts on diamond

A simple model of photovoltaic module electric characteristics

Optimization of a linear induction oscillatory machine in a stirling cogeneration system

A new model for the determination of copper losses in transformer windings with arbitrary conductor distribution under high frequency sinusoidal excitation

Stability analysis of grid-connected voltage source inverters with LCL-filters using partial state feedback

Wide-band power electronics current source for reference purposes

Space vector modulation extended to voltage source converters with multiple legs in parallel

Test platform for hybrid electric power systems: Development of a HIL test platform

Signal processing of zero sequence voltage technique

Noise propagation path identification of variable speed drive in time domain via common mode test mode

Disturbance rejection limitations of back-emf based sensorless PM drives

Assessment of an induction motor drive for high speed operation based on matrix converter

Deep trench MOSFET structures study for a 1200 Volts application

Three-level quadratic non-insulated basic DC-DC converters

Experimental characterisation of high efficiency resonant gate driver circuit

Optimal sizing of stand-alone hybrid wind/PV system with battery storage

Neural network controlled voltage disturbance detector and output voltage regulator for Dynamic Voltage Restorer

Performance comparison of a left shunt UPQC and a right shunt UPQC applied to enhance fault-ride-through capability of a fixed speed wind generator

Impact of permanent magnet field on inductance variation of a PMLSM

Steady-state behaviour of an ac autonomous switched reluctance generator

Control strategies for an autonomous induction generator taking the saturation effect into account

A new control method of single-stage 4-leg matrix converter

A self-commissioning method for permanent magnet dc-motor drives

Influence analysis of the effects of an inductive-resistive weak grid over L and LCL filter current hysteresis controllers

An electronic ballast for driving hid lamps controlled with a FPGA device

High efficiency LEVs

Maximum torque/minimum flux control of Interior Permanent Magnet Synchronous Motor based on magnetic energy model

Injecting position dependent currents in order to reduce oscillations caused by the gearbox of a dc-motor drive

A new modeling approach for circular spiral inductors

A novel engine generator system with active filter and UPS functions using a matrix converter

A fault tolerant converter topology for wind energy conversion system with doubly fed induction generator

Quasi-static decoupled load flow modelling of a power supply network with AC-DC converters applied to light rail system

SiC-Powerdiodes: Design and performance

Use of resonant controller for grid-connected converters in case of large frequency fluctuations

Emulator for a DC-Machine, working as an actuator in a torque split unit of an all-wheel driven automobile

State-space average modelling of 6- and 12-pulse diode rectifiers

An education tool for laboratory exercises with SMPS

Power conditioning in electrical vehicles fed by fuel cells and supercapacitors with a matrix converter

Control principle and modulation method for bi-directional and dual coupled series resonant converters

Considerations of the performance characteristics of the cableless micro-actuator by using mechanical DC-AC inverter

Core power losses characterization based on inverter/induction machine design

New plasma shaping technology for optimal high voltage diode performance

Experimental analysis of temperature distribution within traction IGBT modules

Performance of 3D capacitors integrated on silicon for DC-DC converter applications

A novel small-scale variable speed hydropower emulator using an inverter-controlled induction motor

Design of current controller in an AC drive using a state stimulator concept

Fault-tolerant hybrid four-leg multilevel converter

EMC issues of controlled rectifiers

Experimental study of temperature effect on ultracapacitor ageing

Detent force compensation in segmented long stator permanent magnet linear drives using Finite Element Models

Analysis methods and design of transformers with low leakage inductance for pulsed power applications

Modelling of permanent magnet synchronous machines for simulations of transient phenomena

Medium voltage three-level inverter for high speed applications

On the common mode resonant frequency of transformers

Integration of supercapacitors as transient energy buffer in automotive power nets

Three phase four wires LC coupled shunt active power filter (APF): New topology and control

GA-Based autonomous electromagnetic design and experimental verification of two-phase switched reluctance compressor drive

Adaptive backstepping control of a completely unknown permanent magnet motor

EMI characterization and communication aspects for power electronics in hybrid vehicles

A new method of adaptive predictive control in multimass electromechanical systems with variable parameters

Direct power control of shunt active filter

A zero speed operation sensorless PMSM drive without additional test signal injection

Experimental characterization methods for power MOSFET assemblies

Studies on a LV DC network

Teaching drive control using Energetic Macroscopic Representation - initiation level

Hardware-in-the-loop simulation of the traction system of an automatic subway

State-of-the-art Piezoelectric Transformer technology

Parameterization of DC/DC converter models for system level simulation

Theoretical analysis and optimal design of LLC resonant converter

A Novel maximum power point tracker controlling several converters connected to photovoltaic arrays with particle swarm optimization technique

A novel resonant boost converter with double switches improved by PLL

Improved STATCOM operation under transient disturbances for wind power applications

Application of multiple integrator based controllers for low switching frequency multilevel NPC power active filters: Limitations and improved structures

Field oriented control of IPM drives for optimal constant power operation

FPGA-based Vector PI regulator for electrical drives control

Presentation of a four-quadrant converter based system in traction applications — Reference to modeling, simulation and analysis

Power electronic converters distribution in HOST hybrid propulsion system

3-Level high power converter with press pack IGBT

Power electronics traction transformer

Digital Power Supply Controller for control of extremely precise power supplies

Power supply with independently regulated multiple outputs

Sensorless control of a wound rotor synchronous belt-driven starter-alternator

Simulation based analysis of a monolithically integrated fast and slow IGBT structure (U)

Silicon Carbide (SiC) D-MOS for grid-feeding solar-inverters

Association of wind turbine based dispersed generators and storage systems to participate in primary frequency control

Experimental comparison of three-phase distributed generation systems based on VOC and DPC control techniques

A novel method for PM synchronous machine rotor position detection

Modified double-modulation signal PWM control for D-STATCOM using Five-Level Double Converter

Current measurement-based detection of load torque changes in a variable speed VSI induction motor drive to support motor diagnostics

A wireless ZigBee-based torque sensor for an underwater power generator

A simple starting method for self-controlled synchronous motors in electric propulsion systems for ships

Induction machine modelling using Permeance Network Method for dynamic simulation of air-gap eccentricity

Resonance suppression control in complex frame for three-phase to three-phase matrix converters

Simple fault ride-through capability analysis for wind power plants under different grid code requirements

Optimising high frequency integrator operation of Rogowski current transducers

Power loss design platform for high output power density converters

Novel inverter topologies for two-wheel drive electric vehicles with two permanent magnet synchronous motors

Phase-locked loop with adaptive signal cancellation for three-phase network side voltage source inverter

Design of current controllers for active power filters using naslin polynomial technique

Multiphase converter structures applied to integrated micro-power application circuits.

The control and structure of the power electronic system supplying the Flywheel Energy Storage (FES)

Single-phase grid-connected photovoltaic systems with power quality conditioner functionality

Static synchronous series compensation applied to small wind energy conversion system

Real-time estimation of fundamental frequency and harmonics for active power filters applications in aircraft electrical systems

Compensation of output voltage distortion analysis of PWM inverter with LC filter caused by device voltage drop

Clamping for current-fed de/dc converters with recovery of clamping energy in fuel cell inverter systems

Regenerative turn-off power devices

A novel hysteresis voltage control of series active power filter

A robust control technique for parallel operation of uninterruptible power supply inverters

Piezo-actuators for force feedback in human-computer interfaces: Advantages and drawbacks with regard to electromagnetic actuation

Electrical characterization of 5kV SiC bipolar diodes in switching transient regime

Modelling and control of a 100kW photovoltaic inverter with an LCL grid filter for distributed power systems

AC motor transients and EMI emission analysis in the ASD by parasitic resonance effects identification

Using the model of the solar cell for determining the maximum power point of photovoltaic systems

Analysis of three phase grid failure and Doubly Fed Induction Generator ride-through using crowbars

Run-time reconfiguration of FPGA-based drive controllers

STATCOM Operation under single line-ground system faults with magnetic saturation in series connected transformers based 48-pulse voltage-source converter

Digitally controlled point of load converter with very fast transient response

Cancellation of the common mode voltage in a 3-phase current source rectifier

Parameter estimation for induction motors to study the effects of voltage, frequency and slip

Analytical calculation of the RMS current stress on the DC link capacitor for a VSI employing reduced common mode voltage PWM

Full bridge phase-shifted soft switching high-frequency inverter with boost PFC function for induction heating system

Power electronics for hybrid-drive systems

An Improved ZVT PWM boost rectifier with high power factor and low conduction losses

High first torque harmonic due to insufficient function of dead time compensation in PWM inverters

Power conditioning of a 132 MW wind farm

A first evaluation on the usage of threshold triggered magnetic field sensors for current polarity detection in power conversion systems

Specialized receivers for three-phase contactless energy transfer desktop applications

Multi-dimensional space vector pulse width modulation for disturbance-free operation of a five-phase AC motor drive

Modelling of quantization effects in current control for a synchronous servo drive

Simplifying approach for analysis of space-vector PWM for three-phase and multiphase converters

Power cycling induced failure mechanisms in solder layers

New drive concepts reduce power requirements of large servo presses

Servo drives introduce improved synchronization of large presses with robots

Analysis on the increased losses in supply systems due to voltage drop and voltage distortion

Research on eliminating common-mode voltage of cascaded medium-voltage variable frequency driver with phase-difference SVPWM

Use of dynamic emulation of mechanical loads in the testing of electrical vehicle driveline control algorithms

High Voltage 3D-Capacitor

Wide input voltage range compensation in DC/DC resonant architectures for on-board traction power supplies

Diagnosis of rotor faults in direct and indirect FOC induction motor drives

Active rectifier design and advanced control for medium voltage

Load sharing of the parallel operating adjustable speed generation systems without control signal interconnection

A novel technique to reduce the reverse recovery charge of a power diode

A comparative analysis between the symmetric and the hybrid asymmetric nine-level series connected H-bridge cells inverter

A stand-alone photovoltaic system based on Dc-Dc converters in a multi string configuration

Control of back-to-back-connected neutral-point-clamped converters in wind mill applications

Design of closed loop audio power amplifiers by means of an accurate model of vented box loudspeakers

Improvement of the voltage compensation performance of the series active power filter using a simple PI-Control method

Development of high torque density and efficiency vswitched reluctance motor with 0.1mm short airgap

Modelling magnetic saturation effects in IPMSMs for use in sensorless saliency based methods

Rotor time constant adaptation with ANN application

A low voltage dynamic voltage restorer with self-charging capability

A new method to define power and energy share in a DC link Hybrid wind-diesel powered system by means of storage and dual time-frequency approach

Study on advanced power device performance under real circuit conditions with an exact power loss simulator

A method of power regulation applied to the high frequency inverter for the IH home appliances

A three level inverter concept for low voltage applications

Parameter Estimation of a DC/DC Buck converter using a continuous time model

Accurate sliding-mode control system modeling for buck converters

Study of CVD diamond films for thermal management in power electronics

SMIS - a prospective solution for power MOSFET transistor

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

Improved vector control of induction motor drives using genetic algorithms-based machine and control parameters estimation

Parallel operation of uninterruptible power supply systems in microgrids

Active damping of resonance oscillations in LCL-filters based on virtual flux and virtual resistor

A network model for inverter-fed induction-motor drives

Harmonic distortion of multicarrier PWM strategies in cascaded multilevel converters with unequal DC sources

Developing a simple, modern and cost effective system for EMC pre-compliance measurements of conducted emissions

Application of digital phase locked loop for control of SRM drive

Implementation of a control strategy for PFC with FPGA

A new modulation technique for a three phase PWM buck rectifier

Comparative study of two predictive direct power control algorithms for three-phase AC/DC converters

A new cycle test system emulating inductive switching waveforms

Analysis and filtering of common mode and shaft voltages in adjustable speed AC drives

Loop-shaping H∞ control for a doubly fed induction motor

Increased recuperation efficiency by increment of the recuperation voltage to 1950V in a 1500V DC catenary system

A soft-switched bi-directional DC-DC converter

Integrated series active filter for aerospace flight control surface actuation

Prototype of an axial flux permanent magnet generator for wind energy systems applications

Torque ripple reduction in PMSM DTC drives using matrix converters

Active piezoelectric vibration control for high speed switched reluctance machine

A simpler and faster method for SVM implementation

A current-controlled fuel cell system with short-time storage for grid feeding application

Modelling and simulation of controlled bi-directional power electronic converters in a DC energy distribution line with AC grid- and motor-side active filtering

Detection of rotor faults in torque controlled induction motor drives

Comparative evaluation of IGCT and GTO thyristor for series connection in high power voltage source inverter based FACTS applications

The design method of the inverter for heating both a ferromagnetic metal and a paramagnetic metal

Variable sampling period IM vector control for high performance medium voltage drive

High power inverter using press pack IGBT for high speed applications

Design of propulsion system for a fuel cell vehicle

Harmonic suppression technology of three-phase diode rectifier based on third harmonic current injection

A novel simulation algorithm for frequency analysis of switching converters

Analysis and development of a ride-through device for ac contactors

Control of induction motor drives equipped with small DC-Link capacitance

A single-stage power factor correction switched mode power supply

High reliability motor control for aerospace applications

Remote controlled practical education for power electronics

Mechanical resonance damping in an industrial servo drive

Self-tuning of MTPA current vector generation scheme in IPM synchronous motor drives

Small-signal model for saturated deep-bar induction machines

A new balancing technique with power losses minimization in diode-clamped multilevel converters

Improvement of a static system for water condensation supplied with photo voltaic energy

Interleaved boost converter system for unity power factor operation

Tap changer for distributed power

Control of series compensated induction motor using magnetic energy recovery switch

QFT based robust controller design for a DC-DC switching power converter

Ruggedness of high voltage diodes under very hard Commutation Conditons

Reactive power generation by DFIG based wind farms with AC grid connection

Advanced composite materials with tailored thermal properties for heat sink applications

Estimation of the costs due to renewable energies for a transmission system operator

A simple method for analytical evaluation of LVRT in wind energy for induction generators with STATCOM or SVC

Storage of fluctuating wind energy

Silicon carbide power devices - status and upcoming challenges

Fault ride-through capability implementation in wind turbine converters using a decoupled double synchronous reference frame PLL

Hysteretic current controlled ZVS dc/dc converter for automobiles

Today’s and tomorrow’s meaning of power electronics within the grid interconnection

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

Utility-connected power electronic compensators in wind power applications

Grid Compliance Conditioning of Renewable Power Sources by Means of Modern Power Electronics

Wind farm Flexible AC Transmission Systems

STATCOM Utility-connected power electronic compensator

EPE 2007 Aalborg, Denmark 2 – 5 September 2007

EPE 2007 Aalborg, Denmark 2 ‐ 5 September 2007

EPE 2007 Aalborg, Denmark 2 ‐ 5 September 2007

2005 European Conference on Power Electronics and Applications

Advanced modular communication concepts for data logging and conditioning in photovoltaic inverter systems

Content Provider	IEEE Xplore Digital Library
Author	Mielke, J. Ide, P.
Copyright Year	2007
Description	Author affiliation: Delta Energy Syst. (Germany) GmbH, Soest (Mielke, J.; Ide, P.)
Abstract	This paper describes an investigation in order to find an optimal solution for the communication of a PV installation. Most important is the quality of the collected data to be able to do detailed analysis. High investment costs make it necessary to get the PV installation controlled. In addition to that, because of variable power categories, different requirements in the data acquisition are also necessary. These requirements are overlapping various areas beginning from a LED in the PV inverter up to a data collection in a storage system. In addition to that, the price for a solution must be in a reasonable relationship to the size of the PV installation.
Starting Page	1
Ending Page	9
File Size	344839
Page Count	9
File Format	PDF
ISBN	9789275815108
DOI	10.1109/EPE.2007.4417427
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2007-09-02
Publisher Place	Denmark
Access Restriction	Subscribed
Rights Holder	EPE Association
Subject Keyword	Photovoltaic systems Switched-mode power supply Electrical engineering GSM Measurement Costs Communication system control Data transmission Converter control Inverters Solar power generation Photovoltaic Prototypes System integration Testing
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in