NDLI: Microstructured surface layer induced by shot peening and its effect on fatigue strength

Content Provider	IEEE Xplore Digital Library
Author	Mano, H. Kondo, S. Matsumuro, A.
Copyright Year	2006
Description	Author affiliation: Togo Seisakusyo Corp. (Mano, H.; Kondo, S.)
Abstract	The shot peening process under normal conditions produces a compressive residual stress on the surface of a material without inducing a phase transformation. However, the shot peening process produces a phase transformation (e.g. nanoferrite-phase and metal flow layer) on the surface of carbon steel under the intensified peening conditions of high peening velocity and the use of a high-hardness shot media. Previously, we reported that the fatigue strengths of springs having a nanocrystalline phase were higher than those that did not have a nanocrystalline phase. In this study, we investigated the microstructure of the surface layer produced by shot peening and its effect on fatigue strength. The test specimens were compressive coil springs made of oil-tempered wire. The test springs were all manufactured by the same process, except that the shot peening times were varied. The shot peening times used were 100, 300, 500, 1000, 2000, 3000 and 6000 s. The shot media was steel cut wire having a diameter of 0.25 mm. The surface roughness and residual stress distribution of the test springs were measured. Microstructures were observed using an optical microscope and a scanning electron microscope. In addition, fatigue tests were carried out using a spring fatigue testing machine. The residual stress distribution and the surface roughness were almost the same for springs having shot peening times in the range 300-6000 s. The spring shot-peened for 300 s consisted of a matrix phase and a surface metal flow phase, while the spring shot-peened for 1000 s had a white layer on a portion of its surface. For shot-peening times greater than 3000 s, the white layer covered almost the entire surface. The fatigue strength of the springs increased with shot-peening time up to 1000 s, above which it remained constant
Starting Page	1
Ending Page	4
File Size	3286147
Page Count	4
File Format	PDF
ISBN	1424407176
DOI	10.1109/MHS.2006.320259
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2006-11-05
Publisher Place	Japan
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Fatigue Springs Testing Rough surfaces Surface roughness Optical microscopy Residual stresses Steel Microstructure Wire
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in