NDLI: A direct torque control strategy of five-phase induction motor with duty cycle optimization

Please wait, while we are loading the content...

2015 18th International Conference on Electrical Machines and Systems (ICEMS)

2014 17th International Conference on Electrical Machines and Systems (ICEMS)

Influence of magnet layer number on electromagnetic performance of ferrite interior permanent magnet synchronous machine

Optimization and performance analysis of E-core and C-core flux-switching permanent-magnet machines for electric vehicle applications

Mitigation of acoustic noise by minimize torque and radial force fluctuation in fault tolerant permanent magnet machines

Rotor strength analysis for high speed permanent magnet machines

Comparison of conventional and consequent pole interior permanent magnet machines for electric vehicle application

Optimization design of line-start permanent magnet synchronous motor based on ant colony algorithm

Design of a novel axial-radial flux permanent magnet motor

Analysis and determination of mechanical bearing load caused by unbalanced magnetic pull

Calculation method for single-phase line-start permanent magnet synchronous motor

Investigate the influence of magnetic bridge design on mechanical strength and electromagnetic characteristics in high speed IPM machines

Analytical modeling of multi-segment and multilayer interior permanent magnet machines

An optimized method based on maximum torque-per-ampere control for permanent magnet synchronous motor

Research on optimal design of permanent magnet synchronous motors based on field-circuit coupled method

Influence of magnet shape on torque behavior in surface-mounted permanent magnet motors

Demagnetization conditions comparison for line-start permanent magnet synchronous motors

Experimental study of losses during high-speed constant-voltage operation of three-phase squirrel-cage induction motors

Stator winding design of induction motors for high efficiency

Analytical method for starting performance calculation of induction motors considering skin effect and leakage flux saturation

Research on electrostatic shield for discharge bearing currents suppression in variable-frequency motors

Comparison between induction machine and interior permanent magnet machine for electric vehicle application

The research of marine shaft generator system based on brushless doubly-fed machine

Five-leg voltage source inverter for driving two single-phase induction motors

Analytical investigation of sideband torque ripple in induction machine drive with SPWM and SVPWM techniques

DTC strategies dedicated to IM drives fed by reduced-structure inverters emulating the conventional one: Application to low-cost automotive actuators

Slip frequency correction method for indirect vector control system considering parameters deviation

Soft starting control scheme for three-phase induction motor fed by PWM AC chopper

Research of the influence of different PWM inverters on the iron losses for induction motors

Analysis of electromagnetic torque of induction machines with the load torque changes suddenly

Research on a static excitation control method for the high-power induction generator with a H-bridge cascaded converter topology

Predictive current control for dual three phase induction machine with phase locked loop based electromotive force prediction

A direct torque control strategy of five-phase induction motor with duty cycle optimization

Loss minimization of speed controlled induction machines in transient states considering system constraints

Analysis and optimized control of emergency traction by storage battery for urban rail transit vehicle

Optimal idling speed control of direct-drive electric vehicle launch in consideration of drive comfort

A review of electromagnetic fields concerns on HEVs/EVs

Comparison of double-stator flux-switching permanent magnet machine and double-stator permanent magnet synchronous machine for electric vehicle applications

Anti-slip control of electric vehicles based on disturbance observer and PID controller

Method controlling four sets of permanent magnet synchronous motor by one inverter on a railway vehicle

The influence on characteristics of movable loosely coupled transformer from metal units in urban railway system

Utilization of the battery recovery effect in hybrid and electric vehicle applications

Fault current analysis of DC electric railway feeding systems using superconducting power cables

Development of switched reluctance traction drive for dumper BelAZ-7513

A new active dynamic voltage equalization technology for the series connected ultracapacitors used in EV

Modeling and simulation of shipboard DC power system

Research on the switched reluctance machine drive system for electric vehicles

Fuel cell applications on more electrical aircraft

An inductively coupled power transfer system based power control for motor drives of rail transit vehicle

A novel modular multistage axial-flux permanent magnet machine for electric vehicles

Alternative stator for new brushless dual-rotor flux-switching permanent magnet motor for extended range electric vehicles

Performance comparisons of emerging move-and-charge technologies for electric vehicles

Research of DC micro-grid based on sustainable buildings and electric vehicles

An improved discharge control strategy with load current and rotor speed compensation for High-Speed Flywheel Energy Storage System

Capacitor voltage balancing of a three-level bi-directional buck-boost converter for battery energy storage system

Power compensation in the microgrid by SMES using the current source inverters

Research of EV's charging and discharging control considering demand response

An efficient offshore wind-wave hybrid generation system using direct-drive multitoothed rotating and linear machines

A new control strategy of uninterrupted distributed generation system

Development tendency of positive feedback type anti-islanding of American companies

Frequency control of islanded microgrid based on wind-PV-diesel-battery hybrid energy sources

DC-Bus hybrid energy storage devices cooperation control strategy for stand-alone inverter under imbalance load

An intentionally seamless transfer strategy between grid-connected and islanding operation in micro-grid

Equivalent voltage and current models for PEM fuel cell generation system in grid-connected systems

A damping injection control of isolated bidirectional DC-DC converters based on the load parameter identification

The stator bar's transient temperature characteristic of evaporative cooling generator-motor

Influence of manufacturing tolerances on cogging torque of IPMSM for EPS application

Stator teeth shape design for torque ripple reduction in surface-mounted permanent magnet synchronous motor

New permanent magnet synchronous motor with reduced rare earth magnets

A low-cost permanent magnet synchorous motor with SMC and ferrite PM

Comparison of electrically excited and interior permanent magnet machines for hybrid electric vehicle application

The shape design of IPMSM for the efficiency improvement

Comparative study of novel biased flux permanent magnet machine with doubly salient permanent magnet machine

Characteristic analysis of Spoke-type IPMSM corresponding to the rib structure

A first-prototype of the claw pole type half-wave rectified variable field flux motor

A novel claw pole permanent magnet motor with SMC and ferrite PM

Effect of slot-and-pole combination on the flux-weakening properties of fractional-slot concentrated windings

Quantitative analysis for influence of structure parameters on the slot harmonic in fractional-slot permanent magnet motors

Studies on the structure of radial ventilation channel to improve the cooling capacity of large turbo generator stator

Influence of the stator deformation on the behaviour of a claw-pole generator

Comparison of loss and thermal analysis according to square conductor division considering skin effect

Research on self-excited initiation of a Medium-voltage DC (MVDC) multiphase synchronous generator-rectifier system

Analytical calculation of damper winding losses in large hydrogenerators

Torque ripple reduction in three-stage brushless synchronous motor based on α-β-γ Filter

Design of a twelve-phase flux-switching permanent magnet machine for wind power generation

Performance and demagnetization analysis of the permanent magnet generator with FSCW for small scale wind power systems

Grid-connected control of high-speed permanent magnetic generator based on Z-source inverter

Influence of magnet pole shifting on cogging torque for PMSG application

Control strategy of indirect matrix converter-permanent magnet synchronous generator system

Investigation on hybrid ratio between PM and current excitation sources for high-speed synchronous generator

Material-saving optimization of high-power direct-driven permanent magnet wind generator

The influence of rotor configurations on the performance of an regenerative permanent magnet retarder

Predictive direct power control for permanent magnet linear generator side converter

Dynamic performance of DC-link voltage for automotive hybrid excitation brushless starter/generator with trpezoidal back EMF

Electromagnetic design and analysis of a novel flux-concentrated transverse flux permanent magnet disk generator

Optimal design of inner evaporative cooling permanent magnet wind power generator

The influence of stator pole shape and its arrangements on cogging torque for double-sided AFPM generator

Design and research of 5 MW Permanent Magnet Synchronous Generators for wind turbines

Design and optimization of a nine-phase flux-switching PM generator for wind power systems

Analysis of losses in axial field variable flux permanent magnet synchronous machine with mechanical device

Multi-objective optimization design of interior permanent-magnet synchronous motors for improving the effectiveness of field weakening control

Direct instantaneous torque control of switched reluctance motor based on adaptive backstepping

Backstepping direct torque control of permanent magnet synchronous motor with RLS parameter identification

Research on direct torque control for permanent magnet synchronous motor drives

Improved model-based predictive torque control algorithm with modified modulation index for doubly salient permanent magnet synchronous machines

Research on sensorless DTC of PMSM based on non-singular terminal-sliding-mode observer

Improved model predictive control of permanent magnet synchronous motor

The electromagnetic performance calculation and comparison of flux reversal machine with different winding topologies

Flux-weakening performance comparison of conventional and E-core switched-flux permanent magnet machines

Simulation of flux-weakening control of PMSM for electrical vehicle

A new speed control strategy for interior permanent magnet motor at full speed range

Nonlinear speed control for PMSM using mixed H2/H∞ state output feedback control

Anti-windup speed regulator based on model predictive control

Adaptive sliding mode control for the speed regulation of PMSMs with load change

An improved current predictive control algorithm in the application of 22 KW variable speed permanent magnet synchronous motor

Dead time influence and compensation of direct torque control

A complete model characterization of dual three-phase permanent magnet brushless machine for electromechanical servoactuation

Design of a permanent magnet configuration for nuclear magnetic resonance logging

Design and analysis of a dual-rotor radial flux permanent-magnet generator

Design and evaluation of a new flux-intensifying permanent magnet brushless motor

Design of mining flameproof voltage stabilizing transformer adopting adaptive fuzzy PID controller

Theoretical analysis and simulation study of resonant coupling air core power transformers

Research on economic remaining life of power transformers based on the lifetime data

Joint simulation analysis of brushless DC motor and control system

Modeling analysis of switched reluctance motor with ANFIS and D-FNN

Optimization design of high efficiency variable frequency induction motor based on finite element analysis

State of art of sequential optimization strategies for the design of electromagnetic devices

Design and modeling of axial flux permanent magnet machine with yokeless and segment armature using magnetic equivalent circuit

Software based interaction of multiple domains for the design of electrical machines

Simulation for operating conditions transition of asynchronous machine in blower driving system of chemical industry for flue gas recovery

Study of multiphase modular stator SPM based on phase variable model

Overvoltage mitigation of submersible motors with long cables of different lengths

Study on impedance characteristic of aircraft cables

Methodical considerations for setting up space-resolved lumped-parameter thermal models for electrical machines

Design of a new magnetic-planetary-geared outer-rotor permanent-magnet brushless motor for electric vehicles

Improved square-wave voltage injection method for sensorless control of PMSM and its adaptability to motor parameter variations

Study on stator flux oriented sensorless induction motor control system

Low-speed direct-driven sensorless control including zero-speed for switched reluctance motor based on dynamic inductance model

Research on initial rotor position estimation for SPMSM

Research of Direct Power Control of PWM rectifier based on virtual flux

A novel position sensorless control of flux-switching permanent magnet linear machine for electromagnetic launch

Analysis and improvement of pulsating current injection based sensorless control of permanent magnet synchronous motor

Sensorless control of SRM based on improved simplified flux-linkage method

Rotor position and speed estimation of interior permanent magnet synchronous motor using Unscented Kalman Filter

A novel strategy of initial rotor position detection for surface mounted permanent magnet synchronous machines

Position and radial displacement sensorless control method for bearingless switched reluctance motors

Design on controller of claw pole motor with PM outer rotor

Self-sensing active magnetic bearing using wavelet based position estimation algorithm

Observer based sensorless predictive hysteresis control of a transverse flux machine

An efficiency optimization strategy of PV/DC modular integrated structure under power mismatch condition

Novel output filter of flyback inverter for photovoltaic AC-module

Empirical study of system-level PV power plant power factor adjustment relying on PV inverter

A multi-mode photovoltaic power generation system based on DC bus

Economic dispatch algorithm considering battery degradation characteristic of energy storage system with PV system

Adaptive parameter identification method and state of charge estimation of Lithium Ion battery

SOH estimation of lead acid battery by artificial deterioration

A new SOC estimation algorithm without integrated error using DCIR repetitive calculation

Review of equalizing methods for battery pack

Short-circuit characteristics and impact of PV inverter on the protection of distribution grid

An improved particle swarm optimization MPPT algorithm based on voltage window restrictions

Battery energy storage system smooth photovoltaic power fluctuation control method and capacity demand analysis

Leakage current reduction for transformerless three-level T-Type photovoltaic grid-connected inverter

Analysis on circulating current in parallel connected PV-inverters

Design and implementation of three-phase two-bridge advanced neutral point clamped three-level photovoltaic inverter

Evaluation of low-voltage ride-through capability of a two-stage grid-connected three-level photovoltaic inverter

Multi-level PV inverter with photovoltaic groups independent MPPT control

Calculation of the performance of the dual three-phase permanent magnet brushless machine system using matrix tensor approach

Model-based design for the control module of converter for wind turbine generator

The coordinated neutral point voltage balance control for back-to-back NPC converters used in the wind power system

A current control strategy of three-phase grid-connected inverter with LCL filter based on one-cycle control

An active damping method based on PR control for LCL-filter-based grid-connected inverters

Analysis in DSC-PLL grid synchronization method under grid frequency variation

A single-phase SPLL that combined the advantages of the PLL and the FFT algorithm

Nonlinear modeling and test of inverter based on FPGA

System construction method of parallel operation system constructed with three electric power converters

Examination of cross current suppression method using control of parallel operation system constructed by two electric power converters

Research a control strategy for wind power PMSG with full power converter

A SVPWM based on fluctuate capacitor voltage in 3L-NPC back-to-back converter applied to wind energy

A modulation method based on finite state machine of five-leg inverter for dual motor drives

A specific analysis model of three-level NPC inverter fed adjustable speed drive system with high accuracy

Research on the stability of a wide input AC-DC converter used in high-speed low-voltage generator

Unit power factor control of PMSM fed by indirect matrix converter

Design and optimization of high frequency current transformer

Compensation strategy of short-circuit fault for a single-winding bearingless switched reluctance motor

Six sigma management for fault-tolerant operation of the PMSM drive

On-site partial discharge test of medium voltage switchgear by time of arrival method

Fault-tolerant repetitive control of three-phase CVCF PWM inverters

Evaluating the stator winding inter-tern short circuit fault of permanent magnet motor using FEA combined with experiment

5-phase flux switching machine insulation failure detection using vibration monitoring

Reliability of parallel connected power transformers with failure correlation and its preventive maintenance

The designing and implementation of E2 industrial inverters working reliability testing system

Analysis of power system operation reliability incorporating human errors

Design and analysis of a five-phase double-stator permanent magnet synchronous motor

Analyze and improve lifetime in 3L-NPC inverter from power cycle and thermal balance

Stator inter-turn fault detection for the converter-fed induction motor based on the adjacent-current phase-shift

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Preventive Maintenance Schedule of CNC Machine Tool Based on Monte Carlo Simulation

A new SOH prediction model for lithium-ion battery for electric vehicles

Experimental study on SF6 decomposition characteristics under spark discharges

Open-circuit fault diagnosis of single converter device for directly-driven wind power system

A maximum current sharing method for dual-redundancy brushless DC Motor control

Comparison of electromagnetic performance on E-core axial field flux-switching permanent magnet machines

A parametric magnetic network model for axial flux permanent magnet machine with coreless stator

Design of variable air gap axial flux permanent magnet machine for extending the speed region

Analysis of losses of permanent magnet synchronous motor with PWM supply

Electromagnetic characteristics analysis of surface-mounted and interior hybrid PMSM based on equivalent magnetic circuit method

An approach to research the effect of time harmonic on permanent magnet synchronous motor

Magnetic and vibration element analysis of PM motor under frequencies including magnetostriction

A sensorless vector control system of permanent magnet synchronous motor based on line active disturbance rejection controller

Research on loss of axial field flux-switching permanent magnet machine

Research on stable regions of double-closed loop system for PMSM with low-pass filters

A novel twelve-step sensor-less control for torque ripple reduction in brushless DC motor

Influence of sleeve on rotor eddy current loss in 10kW permanent magnet BLDC motors

Inter-turn fault tolerant control system in brushless DC motor by using yoke winding

Investigation of disc-type brushless motor with PM bearing for LVADs

Current limit strategy for BLDC motor drive with minimized dc-link capacitor

The chaos research on anti-control of BLDCM of electrical vehicle based on adaptive method

Vector control study of axial field flux-switching permanent magnet machine

Influence of rotor design parameters on static characteristics of a novel Hybrid Axial Field Flux-Switching Permanent Magnet machine

Analysis on coupling effect of 2-DOF direct drive induction motor based on 3-D model

Dimension effect on a grid-connected brushless doubly-fed reluctance generator

Design and electromagnetic-thermal analysis of a 64kW Doubly-sine Wound-Rotor Brushless Doubly-Fed Generator

Control strategy for a four-phase fault-tolerant permanent-magnet synchronous machine

Research of torque balance control of dual-rotor motor based on MATLAB

Scheme optimization of an axial magnetic-field-modulated brushless double-rotor machine

Fault tolerant control of dual-rotor PMSM under open-circuit fault conditions

Design a wound rotor Brushless Doubly-Fed Generator based on tooth harmonic principles and finite element analysis

Research of hysteresis loss in large dry submersible motor with the fault of static eccentricity

Modified inverse decoupling control for bearingless switched reluctance motors operating in irreversible domain

Novel bistable PM electromagnetic clutch unit for wheel EV drive

Investigation of a five-phase 20-slot/18-pole PMSM for electric vehicles

Magnetic system study of a Halbach compound-structure PMSM used for hybrid electric vehicles

Torque density improvement of transverse-flux dual rotor machine for power-split hybrid electric vehicle application

Design and implementation of an electromagnetic clutch system for hub motors

Research on a four-phase fault-tolerant PMSM used for EVs

Novel switched-flux hybrid permanent magnet memory machines for EV/HEV applications

A novel wound rotor BDFIG for ship shaft generator application —Control and prototype tests

Numerical calculation and analysis of 3D transient temperature field for transverse flux tubular linear machine

Dynamic analysis of the single-sided linear induction motor with discontinuous secondary

Analysis and design of a magnetically levitated planar motor with multi-layer overlapping windings

Performance comparison of control methods for high speed long primary double-sided linear induction motor

Fault-tolerant primary-permanent magnet linear machine employing modular secondary

Levitation force control of maglev permanent synchronous planar motor based on multivariable feedback linearization method

Slot-pole combinations research of Permanent-Magnet linear synchronous motor with concentrated windings

Current control for the single degree of freedom linear maglev system

Analytical prediction and verifications for inductance profile of tubular transverse flux machines with generic steel lamination

Analysis and optimization of the inner armature tubular flux-switching permanent magnet linear motor

Calculation and analysis of the loss for tubular flux-switching permanent magnet linear motor (TFSPMLM)

Reduction of detent force in permanent magnet linear synchronous motor with double secondary side

Design optimization of permanent magnet synchronous linear motor by multi-SVM

Topology analysis and performance evaluation of a high thrust force density linear switched reluctance machine for low cost conveyor applications

Linear synchronous motor drive system based on proportion resonant current controller in maglev transportation

Control strategy for nine phase maglev permanent magnet synchronous planar motors driven by composite current

Research on small-signal stability of power system connected with different wind turbines based on PSAT

Reactive power dispatch for loss minimization of a Doubly fed induction generator based wind farm

Frequency response control of D-PMSG based on the active disturbance rejection controller

Harmonic reduction through resistive and inductive harmonic impedance

Decoupled direct power control based on improved sector selection algorithm for three-level grid-connected inverter

Torque ripple suppression of DFIG under unbalanced grid voltage conditions using reduced-order generalized integrators

An improved LVRT control method of MW level DFIG-based WECS

Investigation of harmonic current of power system using static var compensator for grid-connected induction generators under condition of low wind speed

Power fluctuation alleviation using cascade STATCOMs with energy storages for wind farm applications

Electromagnetic transient response analysis of DFIG under cascading grid faults considering phase angel jumps

Basic investigations on a wind power plant consisting of series-connected wind turbine generators

Experimental investigations of a hybrid wind power plant consisting of series-connected wind turbine generators when interconnected to the grid

Studies on a hybrid wind turbine generator system considering surplus power

Research on grid-connected and economy of distributed wind power generation

Maximum power point tracking control of brushless doubly-fed wind power generator with open winding fed by dual two-level inverters

Coordinated control of VSC-based DC network for wind farm integration

Performance analysis and comparison for the five-phase inverter SVPWMs

A simplified 3D-SVPWM algorithm for three-phase four-wire shunt active power filter

Voltage balancing strategy based on reference vector angle prediction for three-level shunt APF

An enhanced method based on wavelet for power quality compression

A study on realization of hysteresis current regulator for reducing switching loss using the slope of reference current

The subsection synchronous modulation strategy for high power NPC/H-bridge inverter

Experimental verification of dead-time compensation scheme for pulse width modulation scheme on six-switch two three-phase output inverter

Current harmonic minimum pulse-width modulation for ANPC-5L inverter

Investigation on a novel discontinuous pulse-width modulation algorithm for single-phase voltage source rectifier

An improved capacitor voltage balance control for cascaded H-bridge rectifier

Virtual flux based direct power control for three-level PWM rectifier

Research on the control technique of high power three-level PWM rectifier with IGCTs

A novel dead time compensation method of single-phase PWM rectifier

The calculation of radial force wave weakened percentage for doubly salient motor based on improved magnetic field division method

Indirect testing to determine losses of high speed synchronous permanent magnets motors

Design and packaging of 1200V/300A-IGBT power module for electric vehicle

Modeling and design of testing platform for permanent magnet linear synchronous motor

A new inductance measurement method for permanent magnet synchronous linear motor

Effects analysis of misalignments on dynamic characteristics test for permanent magnet synchronous motor

Numerical estimation and optimization of vibration noise due to magnetostriction and magnetic forces for laminated core structure

Electromagnetic noise assessment for EV's PM driving machines

A new broadband bipolar electrical controlled attenuator

Electric field research of ±800kV dry-type smoothing reactor

Identification of laminated core and winding's physical parameters by stator's modal testings

Research on the vibration and noise of less rare-earth interior U permanent magnet synchronous machine

Interior permanent magnet motor drive system modeling for electromagnetic interference analysis

An inductance testing method for multi-unit PMSM without any auxiliary equipment

A torque measuring method based on encoder for permanent magnet synchronous machine

Development of high speed characteristic measurement method for permanent magnet motors

Improvement of pole-splitting permanent-magnet vernier machine with permanent magnets on both stator and rotor sides

24-Sector space vector decomposition for a dual three-phase PMSM

Current control strategy for six-phase PMSM based on MPC under open-circuit fault condition

Current control method of six-phase PMSM drive system with parallel back-to-back converters

Sensorless switching-table-based direct torque control for dual three-phase PMSM drives

A novel space vector modulation strategy for a five-phase flux-switching permanent magnet motor drive system

Analysis and design of a fault-tolerant six-phase permanent-magnet synchronous machine for electric vehicles

On fault tolerance for IPM-FSCW machines adopting a modular converter

Design and analytical inductance calculations of five-phase fault-tolerant permanent-magnet Machine

Design and test of torque adjustment system of five-phase fault-tolerant permanent-magnet machine

Remedial operation of five-phase tubular fault-tolerant linear PM actuator for active electromagnetic suspension

Influence of flux gaps on the performance of modular PM linear synchronous motors

Investigation of multiphase modular stator SPM with fault tolerance

Analysis of electromagnetic coupling in double-rotor permanent magnet reluctance motor

Rotor design techniques for reducing the cogging torque in a novel dual-rotor axial field flux-switching permanent magnet machine

Modeling of double-rotor permanent magnet reluctance motor

Design and simulation of dual rotor permanent magnet brushless DC motor

Four-dimension current vector control for dual three-phase PMSM

Design of novel disc transverse flux permanent magnet machine

Research on the electromagnetic performance of less rare-earth interior V permanent-magnet synchronous machine

Research on variable flux permanent magnet pole-changing machine with harmonic excitation

Design and analysis of modified spoke type BLDC motor using a ferrite permanent-magnet

Analysis and research of a novel axial field variable flux permanent magnet synchronous machine with mechanical device

Modeling and analysis of a maglev vibration isolation unit using rectangle Halbach permanent magnet array

Design of building air-conditioner control system based on PROFIBUS

Characteristic analysis of a novel series magnetic path hybrid excitation linear eddy current brake

A new calculation method for electromagnetic torque of stepping motors —Teeth Layer Calculated Torque method

Numerical investigation of heat transfer for high-speed permanent-magnet machine with spiral-duct rotor

Design of fuzzy controller with linear extended state observer for magnetic suspension bearings

Magnetic field analysis and optimal design of a novel bistable permanent electromagnetic clutch

Conceptual design of self-sensing actuator based on giant magnetostrictive material

Vibration control strategy for bearingless switched reluctance motors

Pole-shape optimization of flux-switching permanent magnet machine

A design approach integrating the magnetic circuit and electric circuit models for BDFIM

Research of fuzzy two degree of freedom PID control for permanent magnet synchronous linear motor

Magnetic modeling of a linear motor using lumped approach

Nonlinear calculation methods of long primary double-sided linear induction motor

Proposing of high thrust double-sided PM-LSM with magnetic configuration

Performance analysis of a high power density tubular linear switch reluctance generator for direct drive marine wave energy conversion

Design and control of single phase tubular permanent magnet linear motor

Analysis of a permanent magnet linear synchronous motor with segmented armature for transportation system

Characteristics analysis of Permanent Magnet Flux Switching Linear Machines

Thrust characteristic analysis and test of the synchronous permanent magnet linear motor

Design and optimization of a single-phase oscillating PM alternator used for free-piston stirling engines

Reducing detent force and three-phase magnetic paths unbalance of PM linear synchronous motor using modular primary iron-core structure

The research of parallel structure and composite fuzzy control for linear machine based on Mamdani method

A linear consequent pole stator permanent magnet vernier machine

A C-core linear flux-switching permanent magnet machine with positive additional teeth

Magnetic field analytical calculation of the permanent magnet synchronous linear motor with fractional slot concentrated windings

Characteristics comparison of conventional and modular E-core stator with segmental rotor switched reluctance motors

A novel rotor structure design of single-phase flux switching motor

Load characteristics of position control using measured torque curves for Switched Reluctance Motor

Vibration and noise analyzes of canned switched reluctance machines with different winding topologies

Design of synchronous reluctance and permanent magnet synchronous reluctance machines for electric vehicle application

Optimal design of axial flux switched reluctance motor for electric vehicle application

Torque ripple minimization of switched reluctance motors by controlling the phase currents during commutation

Design of stator and rotor for noise reduction of SRM

Direct torque and force control for dual-winding bearingless switched reluctance motor

A new fault-tolerant switched reluctance motor with reliable fault detection capability

Fault-tolerant performance of a mutually coupled dual-channel switched reluctance generator under open-circuit faults

Comparative evaluation of voltage space vector control and direct instantaneous torque control for switched reluctance motor drives

Research on a switched reluctance motor with auxiliary rotor teeth

Switched reluctance motor for electric drive of overland belt conveyor

Calculation of inductances with 3-D FEM for SRM with segmental rotors and fully-picthed windings

Optimization of a switched reluctance motor with unequal rotor arc width

Decoupling control of single winding bearingless switched reluctance motors based on support vector machine inverse system

Decrease torque ripple for SynRM using barrier arrangement design

Nonlinear decoupling control of three-phase AC/DC voltage-source converters

Design of a wireless power transmission system for portable electronic equipment

Considerations of the influence of secondary-side converter type and of the primary-side inverter input voltage on the efficiency of inductive power transfer system

On-line measuring method of high-power IGBT collector current

Comprehensive comparative analysis of two types of commonly-used layouts of IGBT packages

Experimental research on stray inductance extraction of planar bus bars based on HVIGBT dynamic characteristics

A novel 3D space vector PWM control method for 3D magnetic property measurement apparatus

A novel soft-switching DC-DC converter with high-step-down conversion

Electrolytic capacitor free and reduced 120[Hz] ripple on the output of a single-stage CCM flyback converter with power factor correction for LED lightings

Automatic frequency tuning method of ozone power supply to optimize ozone generation system

Comparative analysis of GaN FET power system for maximizing system benefit

A new power circuit topology for energy router

Impact of source internal resistance on efficiency of four resonant wireless power transfer topologies

Design and control of a novel electromagnetic driver for wireless micro-robots

Leakage field computational analysis of closed slot motor based on Ansoft

The effects of stator and rotor eccentricities on measurement accuracy of axial flux variable-reluctance resolver with sinusoidal rotor

The decoupling study on the dual-channel radial flux reluctance resolver with common magnetic circuit

Skew effect on demagnetization of permanent magnet synchronous machines with three-phase short-circuit fault

Soft magnetic material degradation due to manufacturing process: A comparison of measurements and numerical simulations

Optimal design based on genetic algorithm and characteristic test for giant magnetostrictive actuator

Comparison of electromagnetic performances of amorphous and nanocrystalline core-based high frequency transformers

Analysis of electromotive force characteristics and device implementation for ferrofluid based energy harvesting system

Impact of built-in lung-type magnetic shielding on short-circuit strength of large power

Time-stepping finite element analysis on iron loss distribution of cage induction motors

The influence of optimizing rotor on the performance and the iron loss of the permanent machine

Feature investigation of axial flux leakage of a hybrid excitation synchronous machine

Vector Jiles-Atherton hysteresis model and its application to magnetizing analysis for a four-pole isotropic bonded NdFeB permanent magnet

Research of the demagnetization mechanism of line-start permanent magnet synchronous motor under operating condition of sudden reversal

Minimization the torque ripple of flux-switching permanent magnet motor based on iterative learning control

Electromagnetic performances analysis of flux-intensifying permanent magnet synchronous machine with modular fractional slot concentrated windings

Design and electromagnetic performance analysis of a new stator-permanent magnet bearingless machine

Research on main insulation temperature field for open-type high energy density permanent magnet motor

An improved method to estimate initial rotor position for surface-mounted permanent magnet synchronous motors

Influence of periodic carrier frequency modulation on inverter loss of permanent magnet synchronous motor drive system

Research on single-pulse control of traction PMSM in high speed train based on co-simulation model

Comparison of synchronization control techniques for traction motors of high-speed trains

Elevator Energy Regenerative Unit (EERU) for energy saving in a Permanent Magnet Motor Elevator system

Optimal design of Interior Permanent Magnet Synchronous Machine for electric spindle

Optimal efficiency control of modular PMSM on EVs based on iso efficiency contours

Analysis and reducing methods of cogging torque on permanent magnet AC servo motor

Bearingless motor's radial suspension force control based on virtual winding current analysis

Calculation of magnets' average operating point during the starting process of line-start permanent magnet synchronous motor

Comparison of torque densities in alternate wound-field switched flux machines

A new fuzzy active-disturbance rejection controller applied in PMSM position servo system

Study on key technologies of permanent magnet synchronous motor design for electric vehicles

Position control for PMSM servo system using non-smooth feedback and disturbance estimation compensation

A novel acceleration estimation algorithm for mechanical vibration suppression of two-mass system

An enhanced reliability method of initial angle detection on surface mounted permanent magnet synchronous motor

A small size and low cost controller of permanent magnet synchronous motor

Experimental verification of novel hydrogen supply system on a high-pressure tankless fuel cell electric vehicle

Overcurrent suppression scheme for DC bus current at sudden load change of interior permanent magnet synchronous motor

Influence of periodic carrier frequency modulation on stator steel core loss and rotor eddy current loss of permanent magnet synchronous motor

Analysis of torque characteristics of magnetic gears

A study of network emulation for IP network-based control system of a small motor

Dual-redundancy PMSM servo system: Using single neuron PID controller

Speed control with vibration suppression of two-inertia servo system based on resonance ratio control

A method of speed observation based on least-squares linear-fitting with weight factor

Servo control technique of gyro stabilized platform for gravimeter

Modeling and composite nonlinear feedback control of voice coil motor in high precision positioning system

Performance improvement in mini-type brushless DC motors with fractional-slot concentrated windings

Design and manufacture of LLC resonant ultrasonic motor drive $circuit^{1}$

Control scheme for obstacle avoidance navigation of autonomous mobile robots

Design and characteristics of novel 2-phase 4/3 switched reluctance motor

Modelling and design of complex geometry parts vibratory conveying

Adaptive fuzzy tracking control based on backstepping for permanent magnet spherical motor

Rotor orientation detection method of spherical motor based on single 2-DOF optical sensor

Research of orientation detection method for spherical motor and effect on PD control system based on machine vision

Adaptive fuzzy decoupling control for permanent magnet spherical motor dynamic system

Optimisation of the mover kinetic energy of a miniature linear actuator

A novel electronically-controlled linear escapement mechanism

Design of a cylindrical moving core small linear PM oscillatory actuator

Chaos genetic algorithm optimization design based on linear motor

A decoupling method for current regulation in bearingless motors using AC suspension current

Finite element analysis of a novel bearingless flux-switching permanent magnet motor with the single winding

Implicit generalized predictive control of an active magnetic bearing system

Design of a high-performance linear permanent magnet gear

Multiple linear motor control system based on FPGA

The chaos research on anti-control of BLDCM of electrical vehicle

Research on linear induction motor of stereo garage with low frequency

A novel series block feeding method for long primary linear motor

Flux leakage analysis of transverse-flux PM linear machine

Design of the particle swarm optimized PID for permanent magnet synchronous linear motor

A design of eddy current brake for rail vehicle training set

Research on control strategy of free-piston stirling-engine linear-generator system

A proposal of a novel identification method of radial force parameters for bearingless motors

Preliminary study of a relay transmitted cooling system with heat pipes and LHP system in large capacity gas insulated transformers

Steady-state performance of evaporative cooling system of stator busbar in hydro-generator

Temperature rise anomaly analysis of the stator winding in large-capacity high-torque-density evaporate cooling induction motor

Research on motor iron losses and temperature field calculation for mini electric vehicle

Analysis of gas-liquid-solid stator-insulation system in the evaporative cooling turbogenerator

Theoretical and experimental study of the influence of different spray inclinations and positions on spray cooling heat transfer

Analysis of 3D thermal field in the stator of high-capacity and high-torque-density motor with forced evaporative-cooling system

A study of reliability improvement of high capacity cooling system for machine tool

Cooling method of periodic pulse-type linear induction motor armature

Current progress in high thermal conducing insulation technology for large capacity turbine generator

Optimization design and analysis of cooling system used for mini electric vehicle motor

Research on two-phase flow instability in parallel inclined hollow conductors in the evaporative inner cooling power generator

Analysis of heat transfer performance for megawatt wind generator in high altitude extreme conditions

Fluid-to-fluid modeling study on critical heat flux of R134a flow boiling in helically-coiled horizontal tubes

Numerical simulation of air flow distribution in large air-cooled turbo generator rotor at different rotation speed and inlet pressure

Effect of flow rate on the gas-liquid two-phase pressure drop in the evaporative cooling generator stator bar

Temperature field and heat load research for main propellant direct drive Permanent Magnet Motor of Unmanned Aerial Vehicle

3D steady-state thermal load analysis of the bus-bar in large-scale generator with evaporative cooling system

Research on evaporative cooling medium for large generator

Research on matrix converter operated as static reactive power generator

Control strategy for balancing capacitor voltage of modular multilevel converter

Comparison of different DC-link voltage balancing methods for cascade H-bridge multilevel converter

Research and design on multi-target current tracking control strategy of cascaded H-bridge static var generator

Circulating current analysis and suppression of modular multilevel converters

A novel modulation with voltage balancing control for a modular matrix converter

A voltage balancing controller with fuzzy logic strategy for neutral point clamped multilevel converter

A universal power loss estimator for three level IGCT converter

Chain circuit active power filter for high voltage high power applications

Reactive power and harmonics compensation using a flying capacitor multilevel inverter

Suppression of sub-synchronous oscillation caused by HVDC using supplementary excitation damping controller

Control and experiment of a modular multilevel converter-based HVDC transmission system

Performance study of solid state transformer applying BP artificial neural network PID regulator

Parameter design principle of the capacitors and inductors in the power electronic transformer based on MMC

High voltage, high power and medium-frequency power transformer parameters design

A simplified method for controlling the Modular Multi-level Converter energy based on modified Carrier Phase-Shift Modulation

High power wind generator designs with less or no PMs: An overview

Design of permanent magnet brushless motors for high speed applications

Overview of recent advances in innovative electrical machines — With particular reference to magnetically geared switched flux machines

Torque ripple reduction in permanent magnet synchronous machines with concentrated windings and pre-wound coils

Torque ripple reduction of flux-switching machines with twisted-rotor structure

Analysis of cogging torque in surface-mounted permanent magnet machines with segmented stators

Influence of end-effect on torque-speed characteristics of various switched flux permanent magnet machine topologies

Analysis and optimization on characteristics of brushless DC motors based on overlapping commutation

Sensorless DTC of a self-decelerating permanent-magnet wheel motor at full speed range

Induction motor parameter identification based on T-model equivalent circuit

Parameter identification of nine-phase induction machines with concentrated windings

Identification of self-tuning induction motor drive system based on improved least-square algorithm

A simplified approach for identification of parasitic capacitances in three-phase induction motor driven by PWM inverter

Influence of mechanical parameters on power efficiency of induction motors

Measured loss evaluation of asymmetrical parameter type two-phase induction motor supplied with a three-leg voltage source inverter

Integrated system for electrical generation and boosting (iSGB)

Design of dual rotor — Axial gap PMVM for hybrid electric vehicle

DC micro-grid based on DC traction power supply system and electric vehicle batteries charging & discharging system

Design of an automotive 48 V integrated starter-generator on the basis of an induction machine with concentrated windings

Design and operational analyses of an electromagnetic hybrid shock absorber system for scooter application

Investigation of a five-phase 30-slot/32-pole in-wheel outer-rotor permanent-magnet synchronous machine for electric vehicles

Stability of DC-link voltage affected by phase-locked loop for DFIG-based wind turbine connected to a weak AC system

Control of converter-based generators for a single-phase microgrid

Comparison of interior and surface permanent magnet machines with fractional slot concentrated windings for direct-drive wind generators

Synchronizing stability of DFIG-based wind turbines attached to weak AC grid

Small signal modeling and stability analysis of a DFIG based wind power system under unbalanced grid voltage condition

Stability analysis of grid-connected converter based on interconnected system impedance modeling under unbalanced grid conditions

Research on optimization regulation method of ampere density and coil space factor for switched reluctance machine

Influence of rotor pole arc on generating and motoring performance of doubly salient electro-magnetic machines

Evaluation of efficiency optimized variable flux reluctance machine for EVs/HEVs by comparing with interior PM machine

Design of novel 12/14 bearingless permanent biased switched reluctance motor

The effect of excitation angles in single-pulse controlled switched reluctance machines on acoustics and efficiency

Suppressing control of rising bus voltage for switched reluctance motor in braking operation

Loss investigation of Motor Integrated Permanent Magnet Gear

Cost reduction and performance improvement opportunities in automotive accessory motors exploiting 3-D flux paths

Design and analysis of a novel hybrid permanent magnet memory motor

Study on electrically excitation system of a novel brushless synchronous machine

Design and characteristic study of large torque micro-nano platform based on piezoelectric stack

DC motor control based on artificial neural network and adaptive PI

Parameter estimation of PMSM for aiding PI regulator design of field oriented control

A new motor speed extraction method based on the combination of smoothing and polynomial fitting filter

A compensation method for sequential current sampling in multi-phase AC motor control

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

Influence of back-EMF and current harmonics on position estimation accuracy of permanent magnet synchronous machine

Self identification and compensation of position sensor error in interior permanent magnet synchronous machine (IPMSM) drives

Nonlinear adaptive control of induction motor with sliding mode flux observer

Simulation and analysis of novel three-winding series-connected single-phase induction motor under fault operation process

Analysis of electromagnetic torque of a fifteen-phase induction machine in ten-phase operation mode

The research of vector control system harmonic suppression technology based on variable inductance reactor

High speed solid rotor induction machine: Analysis and performances

An improved two-vectors-based model predictive torque control without weighting factors for induction motor drives

Design aspects of a high torque density machine for an aerospace traction application

Power characteristics of isolation units in a novel power electronic transformer (PET) for locomotive traction applications

Control of a three-sources-power-net for More Electric Aircraft application including a fuel-cell-APU

Design and analysis of a novel fault tolerant permanent magnet synchronous motor for aircraft application

Large signal stability analysis for constant power loads with RC parallel damping filters

Experimental study on the effects of the pulse load characteristics on the performance of the slack bus generator

A coordinated control strategy of DFIG-based WECS for high voltage ride-through enhancement

Model predictive control of smart microgrids

Controller design of flywheel energy storage systems in microgrid

Optimal renewable energy farm and energy storage sizing method for future hybrid power system

Dynamic compensating strategy and en-stabilizing compensator to enhance the stability of wind farms integrated into weak grid

A novel output power control for variable-speed switched reluctance generators using artificial neural network

The coupling characteristics analysis of a novel 12/14 type bearingless switched reluctance motor

Is acoustically oriented control always inefficient for an automotive switched reluctance machine?

A thrust force characteristics measurement of the planar switched reluctance motor using flux linkage characteristics

A high efficiency direct instantaneous torque control of SRM using commutation angles control

DC excited flux-switching motor: Rotor structural optimization

3D global windings hybrid excitation switching flux machine

A study of piezoelectric generator based on the flow around a blunt body

Comparison of variable flux reluctance, switched flux and fractional slot PM12-stator slots machines having 10- and 14-rotor poles

Analysis and design of separated permanent magnet actuator for 225AF molded case circuit breaker

AC breakdown voltage of thermal bubble induced two-phase flow condition of inflammable fluorocarbon by self-heating electrode

Research on electromagnetic performance of an axial magnetic-field-modulated brushless double-rotor machine for hybrid electric vehicles

Novel switched flux machine with radial and circumferential permanent magnets

Control of a hybrid excitation machine with open-winding structure for hybrid electric vehicles

A modified flux weakening direct torque control for open winding PMSM system fed by hybrid inverter

Analysis on constant power range enhancement in hybrid-inverter open winding PMSM drive system

The use of genetic algorithms for speed and current controller designs for IPMSM drive

Chaos control of the permanent magnet synchronous motor using an improved sliding mode controller

Analysis of electromagnetic stiffness in submersible motors with inclined rotor eccentricity

Research on discharging bearing currents of PWM inverter-fed variable frequency induction motor

High frequency modeling and analysis of voltage reflection in the three-level PWM inverter-fed high power induction motor drive system

Power supply for testing of induction motors and generators complied with IEEE std. 112-2004 for an energy conversion laboratory

A model predictive control strategy for dual induction motor drive system fed by five-leg inverter

High performance field-weakening control algorithm of sensorless induction motor using speed adaptive full-order observer

A new five-level converter for low-voltage motor drive applications

A new method to reduce both conduction and commutation torque ripple for BLDC machines

Performance evaluation of single-phase PWM AC chopper fed three-phase induction motor

Wide speed range six-step mode operation of IPMSM drives with adjustable dc-link voltage

Induced state space average model of isolated power system

Periodic orbit model of 6-pulse diode rectifiers

A new-type predictive direct power control solution for three-phase grid-connected inverters

A study on a wind turbine simulator with a DC motor considering various moments of inertia

Improved voltage vector control for a stand-alone DFIG system based on predictive current regulation algorithm

A novel inertial control strategy for full-capacity wind turbine with PLL by optimizing internal potential response

Modeling and control of a novel dual-stator brushless doubly-fed wind power generation system

Concerns to the emerging grid codes for wind turbines' LVRT in weak AC grid

The influence of cutting edge deformations on magnetic performance degradation of electrical steel

Innovative needle winding method using curved wire guide in order to significantly increase the copper fill factor

Influence of manufacture process on magnetic property of FeCoV alloy

Analytical approach for magnetic and acoustic modeling of flux-switching permanent-magnet motors: Application to geometrical optimization

The breathing mode-shape 0: Is it the main acoustic issue in the PMSMs of today's electric vehicles?

Control of three phases — Single phase matrix converter for transient electromagnetic sounding

Iron loss investigation of miniaturized magnetic gears having solid cores

A ring-type traveling wave ultrasonic motor using optimized design of piezoelectric ceramics

Study on unit combination type direct-driven submersible permanent magnet motor

Design and first experimentation of an electromagnetically actuated ferrofluidic micropump

Design of a novel electromagnetic planetary gear used for hybrid electric vehicles

Design and analysis method for a DC magnetic contactor with a permanent magnet

Performance analysis of switched-flux machines with hybrid NdFeB and ferrite magnets

Fault tolerant control of harmonic injected nine-phase flux switching permanent magnet motor drive system

Hybrid motor control application with moving average based low-pass filter and high-pass filter

Stator iron loss measurement method in permanent magnet synchronous motor to remove the mechanical loss effect

A general and intuitive approach to understand and compare the torque production capability of AC machines

A comparative study of model predictive current control and FOC for PMSM

Performance evaluation of a single-phase grid connected induction generator

Dynamic loss minimizing control of DB-DTFC IM drives using a flux command look ahead filter

Remanufacturing of low-efficiency induction machines with interior permanent-magnet rotors for energy efficiency improvement

Estimation of saturation characteristic of induction motors by injecting sinusoidal currents with customized low frequency

Comparative study on structure of laminated-rotor high-speed induction machine

Transient behavior of doubly fed induction generator during voltage recovery

Voltage balance control of Vienna-type rectifier using SVPWM based On 60° coordinate system

Boundary and optimum of constant-voltage load three-phase bridge rectifier

Direct power control of PWM rectifier under unbalanced grid voltage

A novel switched-capacitor AC-AC converter with a ratio of 1/4

PWM strategy of a novel cascaded multi-level converter for battery management

Analysis of the Jensen's model, the Frandsen's model and their Gaussian variations

PV powered three-leg VSI fed asymmetrical parameter type two-phase induction motor

Modeling and operation characteristics of large-scale photovoltaic power plants based on PSASP

A two-dimensional direct-drive generator for wave energy conversion

Control of a multifunctional 3-phase 4-wire grid connected converter using adaptive hysteresis current controller

Study of direct-drive permanent magnet synchronous generators with solid rotor back-iron and different windings

Investigation of lumped-parameter thermal model and thermal parameters test for IPMSM

Computation of radiated electric fields from cables using the 1D time-domain and frequency-domain TLM methods

Coupling calculation of temperature field for dry-type smoothing reactor

Investigation of the heat transfer coefficient on the fins for total enclosed fan cooled permanent-magnet motor

Mechanical and thermal management design of a motor for an aircraft wheel actuator

Influence of stator end-winding structure on the end-winding leakage inductance with method of vector-potential

Simulation analysis of load characteristics of roller washers under BLDCM direct driving

Unified spiral vector model of the Dual-Stator Brushless Doubly-Fed Induction Machine

Measurement-parameterized synchronous machine model with spatial-harmonics

Design and analysis on switched reluctance motor system using field-circuit coupled method

A novel modelica based design platform for switched reluctance drive systems

Influences of machine structure on high speed PM BLDC motor

Stability analysis for matrix converter fed permanent magnet synchronous motor system based on PDF control

Comparison of parallel BLDC FSPM machines with strong flux-weakening capability

Novel external rotor switched flux memory motor with hybrid magnets

Comparison of FPCB windings of BLDC machines with paralelly and radially magnetized rotor poles

Simultaneous optimization of voltage vector and duty cycle in model predictive torque control of PMSM drives

Research on an axial-axial flux compound-structure PMSM with varying air gap to fulfill field-weakening control

Optimal design of an axial flux permanent magnet motor

Effect of saturation on iron loss in PMSM

Monitoring of shaft voltages and grounding currents in rotating machines

Design and loss analysis of a new self-decelerating PM in-wheel motor

A novel inertia identification algorithm for PMSM

Low THD modulation strategy for matrix & multi-level matrix converter based on modified DVM

Phase-shift space vector pulse width modulation for nine-switch inverter

Design of a self-oscillating class D power amplifier for piezoelectric actuators

Study on high frequency inverter with 100kHz current feedback control by using FPGA

High power induction heating

Optimal control for shunt active power filter based on adaptive-hysteresis controller and droop controller

System for the insulation fault detection of AC electric machines cores, based on magnetic field scanning

Fault-tolerant performances of switched reluctance machine and doubly salient permanent magnet machine in starter/generator system

Integrated fault diagnosis and fault-tolerant control of IPMSM system

Fault detection technique for identifying broken rotor bars by artificial neural network method

Synthesis of stator current waveform of inverter-fed induction motor with broken bar conditions

Design and research of a novel controllable reactor based on two-phase magnetic material

Extended model of flux displacement in rectangular iron sheets and geometry-dependent hysteresis loss considering saturation

Equivalent stator slot model of temperature field for high torque-density permanent magnet synchronous in-wheel motor

3D electromagnetic and thermal field analysis of edge induction heater

An improved method for design of symmetrical multiphase winding with optimal space harmonics spectrum

Electrical machine optimization using a kriging predictor

Per-unit HIL real-time simulation modeling & test of permanent magnet synchronous motor based on FPGA

Design optimization of electrical transformer using genetic algorithm

Modeling and characterization of a MEMS synchronous generator

Electrokinetic modeling of ion and fluidic transport property in nanopore systems

Mathematical analysis for predicting an unbalanced force in a simple asymmetric circuit using Maxwellian electrodynamics

Hybrid excited claw pole alternators: Attempt to satisfy the increasing power need on board

Construction of a 3kW, 250 kRPM permanent magnet synchronous machine for a combined heat and power unit

Direct torque control of a permanent magnet synchronous generator based on space vector modulation

Study on the optimization of battery voltage in open-winding generation power system

Comparative study on two field orientation control methods for the excitation field in the hybrid excitation synchronous generator

Development of an air-cooled 150 kW high speed permanent magnet motor with Gramme ring windings for turbo blowers

Sensorless IPMSM drive system using saliency back-EMF-based observer with MTPA control

High bandwidth zero voltage injection method for sensorless control of PMSM

Indirect position estimation method for switched reluctance motor using searching windings

Sensorless control of switched reluctance motors based on high frequency signal injection

Stable sensorless V/f and cosφ =1 control for permanent magnet synchronous motor drives

Active flux based full-order discrete-time sliding mode observer for position sensorless IPMSM drives

A new approach for teaching power electronics in electrical engineering courses

Performance evaluation of single-phase full bridge grid-connected converter with reduced switching losses

Hierarchical control system of modular multilevel converter used in high-voltage direct current transmission

An improved 4-step commutation method application for matrix converter

Hybrid SVPWM strategy for diode-clamped 3H-bridge inverter

Fault tolerant control of double-stator-winding PMSM for open phase operation based on asymmetric current injection

Full 3D eddy current and temperature field analysis of large hydro-generators in different operating conditions

Torque ripple reduction in an axial-flux jigsaw-coil permanent magnet machine

Numerical computation of coupled electromagnetic-thermal field in an induction edge heater for the hot strip mill

Study on main magnetic field of ultra-high voltage magnetically controlled saturated reactor

Analysis of torque capability and quality in vernier permanent magnet machines

Redundant performance of multi-primary coupling linear induction motor

Optimal design of a linear induction motor for woodworking machine application

Analysis of coupling effect of double-side linear induction motor with shielding structure

Magnet arrangement of linear PM vernier machine

A new modular and complementary double-sided linear flux-switching permanent magnet motor with yokeless secondary

Dynamic MEC modeling of a linear tubular PM machine

2013 International Conference on Electrical Machines and Systems (ICEMS)

2012 15th International Conference on Electrical Machines and Systems (ICEMS)

2011 International Conference on Electrical Machines and Systems

2010 International Conference on Electrical Machines and Systems

2009 International Conference on Electrical Machines and Systems

2008 International Conference on Electrical Machines and Systems

2007 International Conference on Electrical Machines and Systems (ICEMS)

2005 International Conference on Electrical Machines and Systems

Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003.

ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501)

A direct torque control strategy of five-phase induction motor with duty cycle optimization

Content Provider	IEEE Xplore Digital Library
Author	Wang, Ting Yang, Jiaqiang
Copyright Year	2014
Description	Author affiliation: College of Electrical Engineering, Zhejiang University, China (Wang, Ting; Yang, Jiaqiang)
Abstract	The conventional direct torque control has some disadvantages, such as large torque ripple and high harmonic components. In order to make the best use of five-phase motor's more freedom and flexibility for direct torque control, the concept of a direct torque control strategy with duty cycle optimization is introduced in this paper. It adds a medium vector in each sampling period to reduce the influence of harmonic current. Not only the torque ripple is decreased, but also the third harmonic current appeared in the motor is suppressed. Simulation results verify the proposed strategy can achieve a good torque and current performance.
Starting Page	118
Ending Page	122
File Size	338219
Page Count	5
File Format	PDF
ISBN	9781479951628
DOI	10.1109/ICEMS.2014.7013465
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2014-10-22
Publisher Place	China
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Vectors Torque Induction motors Harmonic analysis Torque control Switches Optimization methods
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in