NDLI: Ascertainment of static characteristic fluctuation of photovoltaic cells and evaluation of high-speed maximum power point tracking control

Please wait, while we are loading the content...

2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe)

2014 16th European Conference on Power Electronics and Applications

2013 15th European Conference on Power Electronics and Applications (EPE)

Proceedings of the 2011 14th European Conference on Power Electronics and Applications

Prediction of the noise power level of squirrel cage induction machines in different operation points taking into account mechanical boundary conditions for modal analysis

Radiation prediction of power electronics drive system for electromagnetic compatibility in aerospace applications

Sensorless control of SRM by the aid of artificial neural network adaptive reference model

A comprehensive physics-based power MOSFET model in VHDL-AMS for circuit simulations

Stability analysis of motor drive interactions in aircraft electrical systems

Gating signal generator for multiphase voltage source inverters using space vector PWM

Sensorless control drive of permanent magnet motor based on a simple on-line parameter identification scheme

A design methodology of resonant LLC DC-DC converter

A 6-in-1 IGBT module performance evaluation platform determining the trade-off between dV/dt and turn-on loss of different IGBT / FwDi chip setups

Comparative evaluation of Fuzzy-PI and PI control methods for a three phase grid connected inverter

Design control of DC/AC converter for a grid connected PV systems using Matlab/Simulink

Space vector modulation strategy applied to interphase transformers-based five-level current source inverters for electric propulsion

Laboratory scale prototype of a power electronic transformer for traction applications

Control of five-level single-phase current-source inverters operating at high and low load conditions

Finite-set model predictive control of a flying capacitor converter with hysteresis voltage balancing

Finite-set model predictive control with heuristic voltage vector preselection for higher prediction horizons

Saturation induced harmonics in permanent magnet synchronous motors

Standalone power supply system under high FCs efficiency and new technique for batteries charging/discharging

Current distribution in copper coils with parallel windings

Evolutive discontinuous SVM for variable speed electric drive

A high speed synchronous drive with very sensitive back-emf based indirect sensors

A comparison between two-commutation-cell multichannel and multilevel buck-derived topologies

Multiobjective optimal choice and design of isolated dc-dc power converters

A surface response methodology approach to study the influence of specifications in the multiobjective optimal design of power converters

A new power MOSFET generation designed for synchronous rectification

Enhanced TFTs model using novel nano-composite high-k gate dielectric

Improved characterization of the magnetic properties of hexagonally packed wires

Control strategies of microgrid with Hybrid DC and AC Buses

Current-fed quadratic full-bridge converter for PV systems interfacing: Static operation

Commutation effect of Adjustable Speed Drives due to installation of active harmonic filters

Small-signal model of photovoltaic power converter for selection of Perturb and Observe algorithm step time

Triangular carrier self-alignment using modular approach for interleaved converter control

The 1200V direct-driven SiC JFET power switch

Study of thermal interfaces aging for power electronics applications

Direct torque control scheme of IM drive with 12-sided polygonal voltage space vectors

Integrated current balancing transformer for primary parallel isolated boost converter

Power quality conditioner with series-parallel compensation applied to single-phase systems

A sensorless control for damping of torsional vibrations with middle voltage induction motor drive for compressor application

Electro-thermal modelling of three phase inverter

Modelling of switching over-voltage on ship service transformers

Simulink-based floating-point DSP Control Platform

STATCOM size optimization through wind turbine operation with fixed power factor

High efficient winding drives with continuous variable transmission (CVT)

Multilevel NPC inverter for low-voltage applications

Multiport converter for fast charging of electrical vehicle battery

Design and control of a single stator dual PM rotors axial synchronous machine for hybrid electric vehicles

Harmonics reduction in high-efficiency operation of double-conversion UPS

Thermal modeling of a high-speed switched reluctance machine with axial air-gap flow for vacuum cleaners

A fault tolerant control and power electronic for a permanent magnet synchronous motor drive

Efficiency comparison between motor friendly hard and soft switching inverters

Direct thrust control of linear induction motor in full operation range for traction application

Stability in automotive power nets: Definitions, algorithms and experimental validation

Motor terminal overvoltage suppression method for parallel inverters

Principle and basic characteristics of hybrid variable-magnetic-force motors

Control scheme of three-level H-bridge converter for interfacing between renewable energy resources and AC grid

Fundamental experiments of transfer device using ultrasonic levitation

High frequency AC distributed power system for fluorescent lighting

A new unequal DC link voltage configuration for a single phase multilevel converter to reduce low order harmonics

Control strategies of DC-based offshore wind farm

Dynamic properties of PCM-controlled current-fed boost converter in photovoltaic system interfacing

Indirect vector control of an induction generator with LVRT capability

Sensorless flow rate estimation in frequency-converter-driven fans

Predictive control of a permanent magnet synchronous machine based on real-time dynamic optimization

Concept of low-voltage AC drive based on double-side cooled IGBT press-pack modules

Voltage vector selection strategy for the interior PMSM DTC system

EMC modelling of drives for aircraft applications: Modelling process and optimisation of EMI filters

Analysis of energy losses for SiC and Si diodes in half-bridge modules and future applications

Encoderless field-oriented control of a synchronous reluctance machine with an estimator in polar stator-current coordinates

One dimensional feed-forward modulation of a cascaded H-bridge multi-level converter including capacitor balancing with reduced switching frequency

High-temperature die-attaches for SiC power devices

Route-dependent power-adapted operation strategies in range extender hybrid vehicles

Energy management for range enlargement of a hybrid battery vehicle with battery and double layer capacitors

Single-phase boost-type rectifier with fault-tolerant capability

Manufacturing tolerances: Estimation and prediction of cogging torque influenced by magnetization faults

Comparison of the semiconductor losses in self commutated inverter topologies for HVDC

FPGA-based sliding mode direct power control of three-phase PWM boost rectifier

Performance optimization of a square wave operation in an indirect matrix converter with a reactor free DC boost converter

Efficiency and hardware comparison of analog control-based and digital control-based 70 W two-stage power factor corrector and DC-DC converters

Impact of solder fatigue on module lifetime in power cycling tests

A space vector PWM algorithm for a three-level seven-phase voltage source inverter

Construction of a multi-frequency compact electro-thermal model for IGBT-based power inverters

New approaches for contactless power transmission systems integrated in PM motor drives transferring electrical energy to rotating loads

Modeling of the air film pressure for a haptic touch actuator

Contactless energy transfer system for computer peripherals

A digital platform for real-time simulation of power converters with high switching frequency

Improved thermal design of a high frequency power transformer

Air-cooling optimization at system level

Application of a power electronic based fault current limiter (FCL) to reduce arc flash energy in electrical grids with high short-circuit power

The accuracy of the classical machine phasor diagram and on-line measurements for permanent magnet machines

Comparison of line and load converter topologies in a bipolar LVDC distribution

Sliding-mode control, dynamic assessment and practical implementation of a bidirectional buck/boost DC-to-DC converter

Development of a real time monitoring and control system for PLC based elevator

IGBT series connection under Active Voltage Control

Chances and limits of a thermal control for a three-phase voltage source inverter in traction applications using permanent magnet synchronous or induction machines

Effect of material technologies on equivalent structural parasitic capacitance of high-voltage cascade rectifier

Power supplies for the Diagnostic and Main Beam Dumps of FERMI@Elettra

A fully automated measurement set-up for the determination of the reverse recovery behaviour of ultra-fast diodes

A simple adaptive control for a novel voltage bus conditioner with reduced capacitive storage

Introduction of a hybrid MOSFET-IGBT power switching device utilising a novel Schottky biased minority carrier injector

Decrease of asynchronous rotation-frequence noise and vibration caused by electromagnetic force inside the motor for a hybrid vehicle

Design study of low ripple and large current dc power supply for fusion plant's superconducting magnet

Numerical modelling in plate-type electrostatic precipitator supplied with pulse energization

Braking chopper solutions for Modular Multilevel Converters

Negative differential miller capacitance during switching transients of IGBTs

Research on the Z-source inverter grid-connected control of micro-grid based on differential geometry

Self-optimizing, high dynamic control of magnet power supplies for particle accelerators

Ripple current minimization of an interleaved-switched multi-phase PWM inverter for three-phase machine-emulation

Investigation of control scheme based on stationary reference frame using three level space vector modulated grid connected inverter with NP balancing algorithm

Enhanced oscillation circuit analysis of switching mode power supplies

Voltage-hold perturbation & observation maximum power point tracking algorithm (VH-P&O MPPT) for improved tracking over the transient atmospheric changes

Generalized integration duty cycle conversion pulse-width modulation (IPWM) algorithm for multilevel-PV DC-link inverter

Dielectric elastomers as generators

Assessment of power electronic inverter cooling requirements for a rear-axle drive

Comparison of resonant LLC and LCC converters for low-profile applications

Voltage balancing control in 3-Level Neutral-Point Clamped inverters using triangular carrier PWM modulation for FACTS applications

An open-circuit faults diagnosis method for matrix converters based on DWT analysis of output current

Thermal stress analysis of IGBT modules in VSCs for PMSG in large offshore Wind Energy Conversion Systems

High-temperature behavior of SiC power diodes

Online parameter-estimation of feedforward gains in cascaded control structures for servo drives

Real time implementation of suboptimal control position drive system with induction machine

Analysis of space vector modulation techniques applied in voltage source converters of ultrahigh speed induction motor drives

Feasibility of time-delay based frequency-control of a sliding-mode buck converter

Optimizing broadband harmonic filter design for adjustable speed drive systems

Multilevel two quadrant DC/DC converter for regenerative braking in mobile applications

Primary-controlled high-PF flyback converters deliver constant dc output current

A novel approach for a Marx topology with bipolar output voltages for Dielectric Barrier Discharge

Laboratory evaluation of the VSD-based hybrid estimation method for the pump operational state

Half-bridge power device gate driver circuit with isolation using integrated magnetic component and carrier signal phase switching

New evaluation of low frequency capture for a wide bandwidth clamping current probe for ±800 A using GMR sensors

Development of a modular high-power converter system for battery energy storage systems

Electrical gearbox equivalent by means of dynamic machine operation

Design, implementation and performance of a modular power electronic transformer (PET) for railway application

Test platform of smart grids with renewable energy systems and plug-in hybrid electric vehicles

Comparison of an Active Stator and a 3-phase synchronous machine

Sandwich design of high-power thyristor based devices with integrated MOSFET structure

Detection of inter-turns short circuits in permanent magnet synchronous motors operating under transient conditions by means of the zero sequence voltage

High efficiency drive system with 3-level T-type inverter

Ascertainment of static characteristic fluctuation of photovoltaic cells and evaluation of high-speed maximum power point tracking control

A fault-tolerant permanent magnet synchronous motor drive with integrated voltage source inverter open-circuit faults diagnosis

2 MW active bouncer converter design for long pulse klystron modulators

Improved control strategy for active bouncers used in klystron modulators

High-precision current control through opposed current converters

Suitable operation conditions for different 100V trench-based power MOSFETs in 48V-input synchronous buck converters

Derivation and characterization of switched-boost inverter

A new control method for eliminating the $2^{nd}$ harmonic at the DC link of a shunt APF under an unbalanced and nonlinear load

Combined solar and AC mains powered LED lighting system

Techniques for the optimal design of photovoltaic inverters interconnected with the electric grid

Influence and benefits of stray magnetic couplings in EMC filtering

Control of SCIG wind farm using a single VSC

Solid state circuit breakers enabling optimised protection of DC aircraft power systems

Diffusion soldering for automotive power MOSFETs offers the first 100% lead free die attach

Critical evaluation of FBD, PQ and generalized non-active power theories

A novel class E RF self-oscillating topology for induction heating applications

Reduction of the number of power amplifiers for an advanced single-stage planar actuator

A new structure of 12Slot-10Pole field-excitation flux switching synchronous machine for hybrid electric vehicles

Electric, hybrid electric and combustion engine driven cars and their impact on environment

Design rules for permanent magnet synchronous machines with tooth-coils for sensorless control up to overload range

Solutions of DC-DC converters for G-class audio amplifiers in mobile platforms

A robust top structure design in a field-stop emitter-implant trench-gate IGBT for improved short circuit ruggedness

Design of 10 kW resonant push-pull DC-DC converter for solid oxide fuel cell applications

Piezoelectric 10W DC/DC converter for space applications

Assessment of dynamic phasors modelling technique for accelerated electric power system simulations

Speed-based supercapacitor state of charge tracker for light railway vehicles

Sensor fault-tolerant control of an induction motor based electric vehicle

P+resonant control of a Z-source inverter for mains voltage drop compensation

Stability analysis of multi-parallel APF systems

Hardware-in-the-loop capable state-space-averaging models for power converters in discontinuous conduction mode considering parasitic component behavior

Harmonic optimization for multilevel converters using space vector fundamental frequency modulation

Sensorless control at high starting torque of a 4000 Nm traction drive with permanent magnet synchronous machine

Straightforward current control — One step controller based on current slope detection

First experimental results of highly efficient permanent magnet synchronous machine for hybrid electric vehicle

MASH Δ-Σ DPWM based sliding-mode controller dedicating to high frequency SMPS

Energy efficient sensorless scalar control for full speed operating range IM drives

High efficiency rectifier for a variable speed transverse flux permanent magnet generator for wind turbine applications

Extended-flux model with core-loss resistance of synchronous reluctance motors and torque estimation without core loss measurement and position encoder

Modified four leg DSTATCOM topology for compensation of unbalanced and nonlinear loads in three phase four wire system

Ramp based control of DVR to mitigate voltage sags/swells

Control of a modular multilevel converter-based HVDC transmission system

A novel method for torque ripple reduction in 6/4 two rotor stack switched reluctance motor

Complete short-circuit failure mode properties and comparison based on IGBT standard packaging. Application to new fault-tolerant inverter and interleaved chopper with reduced parts count

Lifetime investigation of high power IGBT modules

Seven-level single-leg flying capacitor converter voltage balancing dynamics analysis

Design and evaluation of state of the art rectifiers dedicated for a 46 kW E-ECS aerospace application with respect to power density and reliability

Design of a sustainable residential microgrid system including PHEV and energy storage device

Dual active bridge modulation with complete zero voltage switching taking resonant transitions into account

Optimal direct torque control for PMSM based on model predictive control

A new high step-up voltage ratio soft switching PWM boost DC-DC power converter with edge resonant switched capacitor modular

Vehicle fuel consumption simulation model using VHDL-AMS

Improvement of fault ride through capability of wind farms using DFIG considering SDBR

Thermal-electrical modeling and simulation of resonantly operated DC-DC converters based on extended describing function method

Comparison of chip- and module-measurements with high power IGBTs and RC-IGBTs

A current fed multi-resonant converter with extended voltage regulation range

Matrix converter systems stability analysis taking into account switching effects

Improvements of speed adaptation response for IPMSM position sensorless vector control with parallel feedforward compensator

PWM-based control of a cascaded three-phase multilevel inverter

Soft switching three level inverter with passive snubber circuit (S3L inverter)

Optimization of micro-grid operation by dynamic grid mapping and token ring control

Short fail-safe capability and fault diagnosis strategies dedicated to a reconfigurable 5-level double-boost PFC

Design considerations for the fast charge of supercapacitors in the frame of low voltage applications

Comparison of 3 self-starting step-up DC:DC converter topologies for harvesting energy from low-voltage and low-power microbial fuel cells

Digital proportional-resonant (PR) control with anti-windup applied to a voltage-source inverter

A 4-limb flying capacitor — Based active power filter for unbalanced distribution networks

Experimental comparison of dc-dc boost converters with SiC JFETs and SiC bipolar transistors

Control system of the multistage active rectifier energizing power shovel multi-motor variable-frequency drive for mining applications

Optimal control of voltage source converters for fault operation

On the design considerations of a 1.5 MVA wind energy system

Direct modular multi-level converter for gearless low-speed drives

Operation of multi-phase converters with coupled inductors at reduced numbers of phases

Three-dimensional parasitics cancellation in EMI filters with Power Sandwich construction

Models and effects of different updating and sampling concepts to the control of grid-connected PWM converters — A study based on discrete time domain analysis

Distribution grid impact of Plug-In Electric Vehicles charging at fast charging stations using stochastic charging model

A method of voltage limiting and distortion avoidance for islanded inverter-fed networks under fault

Accuracy study of frequency converter estimates used in the sensorless diagnostics of induction-motor-driven systems

Failure modes and robustness of SiC JFET transistors under current limiting operations

Evaluation of machine learning techniques for electro-mechanical system diagnosis

Generator Emulation Controls for photovoltaic inverters

Necessity and possibility of smart grid technology application on railway power supply system

Improving the performance of modular multilevel converter by reducing the dead time effect

A novel AC-AC shunt active power filter without large energy storage elements

Research on three-phase PWM hybrid-clamped five-level AC-DC converter with high power factor

ZVS three-level phase-shift high step-down DC/DC converter with two transformers

Interleaved high step-up converter with built-in transformer and voltage doubler for PV grid-connected generation systems

Parameter optimization study and performance analysis of 6S-8P permanent magnet flux switching machine with field excitation for high speed hybrid electric vehicles

Disturbance compensation method for single phase utility interactive inverter with FPGA based hardware controller

Modeling and simulation of heat pump air conditioning unit intending energy capacity reduction of energy storage system in microgrid

Improved modulation of two-stage matrix converter for EMA in aircraft applications

Bidirectional converter interface for a battery energy storage test bench

Thermal analysis of permanent-magnet synchronous reluctance machines

Turn-off behavior of 4.5 kV asymmetric IGCTs under zero voltage switching conditions

Transient stability analysis of inverter-interfaced distributed generators in a microgrid system

DC-Link voltage ripple minimization in a modular multilevel voltage source converter for HVDC power transmission

Low power rectenna topologies for medium range wireless energy transfer

A Coffin-Manson model to predict the TRIAC solder joints fatigue during power cycling

Smoothing control of wind farm output fluctuation by new scheme with energy storage system

Ground fault detection method for three phase inverters based on the third harmonic

A new carrier-based PWM strategy with minimum output current ripple for five-phase inverters

New 1700V SPT+ IGBT and diode chip set with 175°C operating junction temperature

A pumped storage power plant with double-fed induction machine and cascaded frequency converter

Parametric study of dead time effect on three phase AC output impedance of Voltage Source Inverter (VSI)

An analytic simulation model for a supercapacitor-based energy storage system

Modeling of IGBTs with focus on voltage dependency of terminal capacitances

Railway catenary parameters identification based on harmonic current injection

Development of a grid connected micro wind generator. A practical activity for the course on electric generation with wind energy

Laboratory tests of linear electric machines for wave energy applications with emulation of wave energy converters and sea waves

Service continuity of an IM distributed railway traction with a speed sensor fault

Open-loop approach to control a Modular Multilevel Frequency Converter

Drive systems with torsional load: Versatile low-cost educational laboratory set-up

A new topology of direct AC to AC converter with soft-switching based on a MERS pulse link concept

The use of real time digital simulation and hardware in the loop to de-risk novel control algorithms

A new multilevel converter with multi-winding medium-frequency transformer

Online STATCOM load estimation using inverter synchronized sampler and recursive least-squares

Experimental verification for a matrix converter with a V-connection AC chopper

Two phase interleaved buck converter for driving high power LEDs

Power quality improvement by UPQC with minimum real power injection

Wireless communication system for microgrids management in islanding

Thermal modelling to analyze the effect of cell temperature on PV modules energy efficiency

A magnetically isolated gate driver for high-speed voltage sharing in series-connected MOSFETs

Grid connection for wave power farms

Design optimization methodology for power converters based on global energy requirement criteria. Application to a DC-DC flyback structure

Multilevel high voltage converter driving dielectric elastomer generators

Implementation of harmonic control for a 3-phase 4-wire inverter with harmonic-loaded neutral

Resonant inverter with a variable-frequency asymmetrical voltage-cancellation control for low Q-factor loads in induction cooking

A soft switching class D current source inverter for induction heating with non-ferromagnetic load

Dual-mode current-fed semi-quadratic buck-boost converter for transformerless modular photovoltaic applications

The influence of asymmetries on the parallel connection of IGBT chips under short-circuit condition

Current distribution in high power laminated busbars

Gatecard reliability prediction analysis

Controlling the ac-side voltage waveform in a modular multilevel converter with low energy-storage capability

Pre-sizing optimization of an inverter and the passive components

Frequency switching analysis of an iUPQC with hardware-in-the-loop development tool

Design and characterization of planar integrated passive component for power converters

Sensorless control of a doubly fed induction machine based on an Extended Kalman Filter

A predictive dead-beat PI current controller for active power filters

A high frequency high voltage power supply

Monitoring of rotor bar faults in induction generators with full-size inverter

Transformerless series active power filter to compensate voltage disturbances

Analysis of an inductive charging system for a commercial electric vehicle

Simulation of a commercial electric vehicle: Dynamic aspects and performance

Single-phase series active conditioner active power flow in a harmonic free electrical system during sag and swell events

Investigation of tradeoffs between efficiency, power density and switching frequency in three-phase two-level PWM boost rectifier

Investigation of mechanical stress effect on electrical behavior of Trench Punch Through IGBT under short-circuit condition at low and high temperature

Optimisation of a distributed generation power pack using a novel dynamic system model including efficiency characteristics

Active protections for normally-on SiC JFETs

Parameter adaptation of a sensorless controlled induction machine by measurement of the slip frequency

Teaching non linear systems: The educational approach of power electronics

Two control strategies comparison of a three phase shunt active power filter for power quality improvement with experimental validation

Power distribution architectures and converters for high energy physics: Application to LHC experiments

Genetic algorithms for maximum power point tracking in photovoltaic systems

An improved Finite Control Set-Model Predictive Control (FCS-MPC) algorithm with imposed optimized weighting factor

Power quality analysis of a static synchronous compensator (STATCOM) connected to a high voltage transmission network

Simulations of a current-source Shunt Active Power Filter with Carrier-Based PWM and Periodic Sampling modulation techniques

Design of integrated electro-hydraulic power unit for hybrid mobile working machines

Decentralized active gate control for current balancing of parallel connected IGBT modules

A hybrid RMRAC-LQR control scheme applied for power quality conditioning devices

Surface permanent magnet synchronous machine self-sensing position estimation at low speed using eddy current reflected asymmetric resistance

Novel phase shifted carrier modulation for a cascaded H-bridge multi-level StatCom

Modularized design consideration of a general-purpose, high-speed phase-leg PEBB based on SiC MOSFETs

A novel parallel voltage and current control scheme implementing P-F and Q-V droop in a microgrid

A method for controlling three-phase-laminated-core variable inductor applied to reactive power compensator by voltage reversible chopper

A novel switched reluctance machine with windings and permanent magnets in the stator yoke

Current ripple reduction in synchronous machines driven from multi-functional converter systems

Efficiency improvement of contactless energy transfer systems using series compensation device named MERS

Sensorless control method with relatively low frequency signal injection for low acoustic noise

Evaluation of inherent elements in a SiC power MOSFET by its equivalent circuit

FOC and DTC comparison in PMSM for railway traction application

A multi-physics model of the VJFET with a lateral channel

Preliminary investigations of piezoelectric based LED luminary

A converter topology for high current density drive applications

Fast switching 1200 V 50 A silicon carbide BJT's in boost converters

Design optimization of a five-level active NPC inverter

Multilevel converters for 10 MW Wind Turbines

Design and analysis of a bus bar structure for a medium voltage inverter

Dynamic simulation of planetary type magnetic gear based on reluctance network analysis

Effects of varying load conditions on adaptive gate control methods

The application of the SHE-PWM based on Particle Swarm Optimization for the improvement of the cascaded H-Bridge inverter output voltage

Comparison of direct voltage control methods of multi-terminal DC (MTDC) networks through modular dynamic models

High performance position sensorless control using rotating voltage signal injection in IPMSM

Circulating current control of double converter system for wind power generation

On the role of the shaft end in the radio-frequency emission of discharge bearing currents in induction motors

Dynamic emulation of multi-mass mechanical loads in electric drives

Fault detection algorithm for an UPS operation of power-station

Study on the PWM methods of the unbalanced input voltage three level inverter with the energy storage device

Stochastic model in eddy current Non Destructive Testing

Implementing clamp on wireless torque measurement system for rotating shaft applications (UI)

Basic examination of eddy current estimation based on reluctance network analysis

Position estimation in a true asymmetric cascade H-bridge multilevel inverter

Reliability models applied to a system of power converters in particle accelerators

Failure tolerant operation and trimming principle in the CLIC main linac

Circuit for reducing devices voltage stress due to DC-link capacitor voltage ripple in a Neutral-Point-Clamped inverter

Achieving higher power density in DC-DC converters for photovoltaic applications

New resonant inverter topology with active energy recovery in PDM mode for DBD plasma reactor supply

Flicker mitigation in DFIG wind turbine systems

Voltage sag ridethrough of PMSG wind turbines using droop control stabilization

Medium frequency transformer in resonant switching dc/dc-converters for railway applications

Design of passive converter for wind driven generators

Stator current and power factor optimization in an IPMSM for railway traction application

A versatile DC-DC converter for energy collection and distribution using the Modular Multilevel Converter

A PWM strategy dedicated to RMS current reduction in DC link capacitor of an embedded three phase inverter

A new peak-current injected digital control circuit for dc-dc converter

Operation and control of VSC-HVDC multiterminal grids for offshore wind

Using SPICE for power system simulations

Control scheme for a single phase hybrid multilevel converter using repetitive and resonant control approaches

Sensorless torque control of a PM motor using modified HF injection method for audible noise reduction

The influence of impact load on torsional dynamics of generator units

Transformer-less PWM high power medium voltage Variable Speed Drive

A new digital modulated interface for a precise and robust current sensor

Soft switching interleaved active clamp flyback inverter for a photovoltaic AC module system

The design and application of flow cell systems

Contactless charging for electric vehicles with a large air gap

Modelling of electrically excited synchronous machine (EESM) considering nonlinear material characteristics and multiple saliencies

Power cycling test bench for IGBT power modules used in wind applications

Programmable Logic Device based brushless DC motor control

Adaption of MOSFETs current slope by systematic adjustment of common source stray inductance and gate resistance

Simulation and analysis of low-resistance AlGaN/GaN HFET power switches

Reducing passive filter sizes with tuned traps for distribution level power electronics

Analysis of a deeply saturated sensorless PMSynRel drive for an automotive application

A high-efficiency resonant solar micro-inverter

Power and DC link voltage control considerations for indirect AC/AC Modular Multilevel Converters

Universal DC-DC converter using SEPIC

Transient modeling of an integrated charger for a plug-in hybrid electric vehicle

Design of a powermanagement for a battery buffer system in an electric lift truck by means of fuzzy control and genetic algorithm

Fractional-order based droop control of an universal wind-turbine system

Sensorless position control for SPMSM at zero speed and acceleration

Accurate sizing of supercapacitors storage system considering its capacitance variation

Capacitor voltage balance limits in a multilevel-converter-based energy storage system

Full-power converter based test bench for low voltage ride-through testing of wind turbine converters

A fast estimation algorithm for low-frequency oscillations in power systems

Model predictive control strategies for DC-DC boost voltage conversion

A new 5-level topology allowing the balancing of the DC bus capacitors voltages

Fast acting autonomous and rugged shunt protection against open circuit faults in high power conversion

The circuit-level decoupling modulation strategy for three-level neutral-point-clamped (TL-NPC) inverter

Perspectives of high-voltage SiC-semiconductors in high power conversion systems for wind and photovoltaic sources

An all-in-one power electronic solution for the introduction of PV and storage for smart grids

A 200mA switched capacitor voltage regulator on 32nm CMOS and regulation schemes to enable DVFS

Multi-fidelity Simulation modelling in optimization of a hybrid submarine propulsion system

Energy efficiency analysis of grid-connected photovoltaic inverter with storage battery

Thermoelectric power generation: Properties, application and novel TCAD simulation

Lifetime calculation for power modules, application and theory of models and counting methods

Steady state performance and electrical stability analysis of matrix converter fed induction motor drive under Volt/Hertz control

Ultrafast safety system to turn-off normally on SiC JFETs

Fault tolerant operation of power converter with cascaded cells

Power losses evaluation of three multilevel converter topologies for direct interface with medium voltage grids

Supporting unbalanced grids with induction machine drives by inverters without intermittent energy storage

A comparison of PWM techniques for three-level five-phase voltage source inverters

A review of parallel operation of active power filters in the distributed generation system

Simulation of linear switched reluctance motor drives

Design and analysis of a flatness-based control approach for speed control of drive systems with elastic couplings and uncertain loads

Analytical evaluation of switching characteristics in five-phase drives with discontinuous space vector pulse width modulation techniques

AC power source based on series-connection between cascaded PWM multilevel inverter and linear power amplifier

Hardware-in-the-Loop simulation of a complex AC-fed motor drive with triple active front-end 3-level rectifiers and induction motor drive using an intra-step-parallel state-space-nodal solver

Investigation of variable DC link voltage operation of a PMSG based wind turbine with fully rated converters at steady state

A datasheet driven power MOSFET model and parameter extraction procedure for 1200V, 20A SiC MOSFETs

Analysis of the technology of cable fault detection and location online

Development of an optimized power section for a 5 kW low voltage traction inverter

Prospects and challenges of future HVDC SuperGrids with modular multilevel converters

A comparison of two methods of estimating losses in the Modular Multi-Level Converter

Evaluation of the machine non-linearities as an aid to develop self-commissioning in sensorless drives

Adaptive cooling of power modules for reduced power and thermal cycling

Loss comparison of different sub-module implementations for modular multilevel converters in HVDC applications

Analysis and comparison of performance evaluation methods of battery electric vehicles

Selection of a semi-empirical model for use as a real time model in a virtual fuel cell

A power converter topology for high efficiency DC magnet power supplies

Control scheme for source voltage sensorless PWM converters under source voltage unbalance

A new approach to higher density rectifier with SiC power devices for 380 V DC distribution systems

Temperature adaptive IGBT gate-driver design

Field programmable gate array based control of Dual Active Bridge DC/DC Converter for the UNIFLEX-PM project

Modelling and control of one bearingless 8–6 switched reluctance motor with single layer of winding structure

Advanced three-level converter with newly developed 1200V reverse blocking IGBTs

DC-link voltage ripple analysis and impedance network design of single-phase Z-source inverter

EMC and safety in vehicle drives

Optimisation of the design parameters of an asymmetric brushless DC motor for cogging torque minimisation

A simple current control method with instantaneous reactive power minimization for four-leg indirect matrix converters

FRT capability of direct power controlled converters connected by an actively damped LCL-filter for wind power applications

Demonstration of 25 $W/cm^{3}$ class all-SiC three phase inverter

Heating method for ferromagnetic metal by power factor control

Active control of series connected, voltage driven power devices using a single gate drive

Performance analysis of active damped small DC-link capacitor based drive for unbalanced input voltage supply

Vector control of primary active rectifiers in traction converter with medium-frequency transformer

Modeling of Flux Reversal Machines for direct drive applications

Optimised power converter for multi-MW direct drive permanent magnet wind turbines

Hybrid sensorless control of axial flux permanent magnet motor drives, including zero speed

Development of a boost converter for PV systems based on SiC BJTs

Design approach for the cold cathode fluorescent lamps backlight inverters with lamp current balancing chokes

Magnet eddy current loss calculation method for segmentation analysis on permanent magnet machines

A review on synchronization methods for grid-connected three-phase VSC under unbalanced and distorted conditions

Averaging methods for electrical-thermal converter models

Design and supervision strategies for embedded electric power systems equipped with energy storage devices

Planar layer permeability measurement setup

A simple yet efficient doubly-fed drive/generator controller

Robust control of UPFC for MV distribution grid interconnection under unbalanced conditions

Evaluation and proposal of MMC-HVDC control strategies under transient and steady state conditions

A new fault detection method for NPC converters

Incorporation of non-linear dynamics to the observability formulation of shipboard power systems

A hold-up time extending method for asymmetrical half-bridge converter

Power Sandwich industrial drive with SiC JFETs

High-frequency soft-switching current-fed inverter for off-grid micro-generation: Fuel cell application for rural electrification/development

Eliminating current sensors of Indirect Matrix Converter using neuro-fuzzy controller

Mix-voltage power conversion for single-inductor dual-output (SIDO) boost converters and SIDO bipolar converters

3D Integration of a three-phase bi-directional power switch

Design and implementation of the distributed control for parallel AC/DC converters

Design and implementation of 50kW multi-string photovoltaic PCS using three-phase interleaved DC-DC converters

A novel power converter suitable for contactless power distribution with capacitive coupling using series-connected switched-mode active negative capacitor

Reliability analysis of DC power distribution network based on minimal cut sets

Fault detection in multilevel cascaded inverter using park's vector approach with balanced battery power usage

Validation of non-linear dynamic FEM model for design of PM machines with concentrated windings in ship application

Comparison of press-pack IGBT at hard switching and clamp operation for medium voltage converters

A dual high-speed PMSM motor drive emulator with Finite Element Analysis on FPGA chip with full fault testing capability

Space vector modulation scheme to minimize common-mode voltage generated by a three-phase hybrid multilevel inverter

Resonant controllers for the control of 4-leg Matrix Converters

EMC behavior of PWM inverter structure based on coupled interleaved cells using Intercell Transformers

Control of a hybrid excitation synchronous generator for a wind energy application

Method of evaluating the zero-sequence inductance ratio for electrical machines

A simple calorimetric setup for the accurate measurement of losses in power electronic converters

Control of a Brushless Doubly-Fed induction generator via a matrix converter

Direct torque control and virtual-flux based direct power control of current source converter in wind turbine application

Efficiency improvement in DC and AC motor powered electric vehicles

A fault tolerant drive for high speed permanent magnet machines

Powering low-cost utility sensors using energy harvesting

Performance analysis and comparison of three IPMSM with high homopolar inductance for electric vehicle applications

A new multiple coils topology for domestic induction cooking system

Operating characteristics of a three-phase to single-phase matrix converter with hybrid control scheme of power compensation and modulation applied to gas engine cogeneration system

A novel method for collective dimming of high intensity discharge lamps

Comparison of multilevel converter-based STATCOMs

Flux-weakening strategies for a five-phase PM synchronous machine

Fault ride through capability for solar inverters

Frequency / duty cycle current-mode fuzzy control for LCC resonant converter

Sensorless control of permanent magnet synchronous motor employing extended Kalman filter in combination with HF injection method

Comparison of power converter circuits for HVDC with SMES

Liquid cooling methods for power electronics in an automotive environment

Poly-phased Matrix Converter — A 27 input phases to 3 output phases experimental set-up running with hard and soft commutations

Preliminary feasibility study of a speed estimator for piezoelectric actuators used in forging processes

Contactless power supply system with resonant circuit parameter change compensation

Control of the Modular Multi-Level Converter for minimized cell capacitance

Parallel/series connection of self-sustained oscillating series-parallel resonant converters

Steady state lifetime estimation of the power semiconductors in the rotor side converter of a 2 MW DFIG wind turbine via power cycling capability analysis

Open-loop approach for control of multi-terminal DC systems based on modular multilevel converters

10kV/30kA unipolar arbitrary voltage source for Hardware-in-the-Loop Simulation Systems for HVDC circuit breakers

New junction temperature balancing method for a three level active NPC converter

Analysis and evaluation of interleaved class D-E resonant converter

On understanding and driving SiC power JFETs

Novel switched reluctance motor drive circuit with voltage boost function without additional reactor

Efficiency optimization of a 30KW interleaved 4-channels DC/DC converter with variable number of active channels

A capacitor charging power supply for repetitive pulsed power systems

Energy efficient storage systems in the DC link for the drive unit of machine tools

Model predictive current controller for four-leg converters under unbalanced conditions

Transferable skills and engineering practices — Case analog signal processing

A single loop repetitive voltage controller for a four legs matrix converter ground power unit

Small signal modelling and stability analysis of multiterminal VSC-HVDC

A MATLAB Simulink model for Toyota Prius 2004 based on DOE reports

Evaluation of a flyback regenerative voltage equalisation circuit for series-connected supercapacitor stacks

Design and optimization techniques for the current return path in a composite aircraft

Measurements on IGCTs and diodes series connection

Effects of machine asymmetry on a two-machine direct torque controlled induction motor drive

Novel bearingless slice motor design with four concentrated coils featuring a unique operational behavior

Characterization of a new 1.2 kV IGBT 3L-NPC phase-leg module for low voltage applications

Improvements in SOA ruggedness of 6.5 kV IGBTs

A SEPIC LED driver with a hybrid dimming technique for road vehicles

System integration of a Variable Speed Generator Set: Challenges and system design

Design of a 12-pulse cycloconverter with fault-tolerance capability

DC-AC inverter based on a Cycloconverter output stage with active filter for peak power reduction in transformer and switches

A new method for AC traction drive frequency characteristic measurement

Preliminary hardware implementation of a six-phase quad-inverter induction motor drive

Design considerations for core material selection and operating modes for a high frequency transformer used in an isolated DC/DC converter

FlePS: A power interface for Power Hardware In the Loop

New type LCCT-Z-source inverters

PVECLAB: Interactive power electronics training, teaching and experimentation tool

Supercapacitors-based energy storage for urban mass transit systems

Wind/PV/diesel energy system: Modeling and sizing optimization

Dynamic capacitor — VAR and harmonic compensation without inverters

Reduction of high frequency zero sequence harmonics in parallel connected PV-inverters

Fault ride through study of doubly fed induction generator wind turbine in real-time simulation environment

A novel design methodology maximizing the weighted-efficiency of flyback inverter for AC photovoltaic modules

Impact of different control schemes on the life consumption of power electronic modules for variable speed wind turbines

Novel high efficiency multilevel DC-DC boost converter topologies and modulation strategies

Active du/dt filter dimensioning in variable speed AC drives

Open-circuited switch fault detection for fault tolerant matrix converter motor drive systems

Minimizing temporal simulation time to estimate common mode disturbances

Connection and disconnection transients for micro-grids under unbalance load condition

DC-link voltage oscillations reduction during unbalanced grid faults for high power wind turbines

Lighting systems: A course for increasing power electronics attractiveness in non-specialized engineer school?

Multiphysic optimal design of an inverter fed PMSM and choice of switching frequency

LED dimmer as versatile hardware platform for practical exercises in power electronics and control courses

Motor condition monitoring of induction motor with programmable logic controller and industrial network

Power flow management design for an electric propulsion system of a hybrid catamaran

Overview of novel loss-mitigating schemes for high-frequency-link inverters with application potential for photovoltaics, wind, fuel cell, energy storage, and EV/HEV

Reduction of voltage violations at remote location by intelligent active and reactive power control of a DFIG based wind turbine

A new capacitor balancing technique in Diode-Clamped Multilevel Converters with Active Front End for extended operation range

Performances regeneration of supercapacitors during accelerated ageing tests in power cycling

Thermal modeling of the module integrated DC-DC converter for flexible thin-film PV modules

Cascaded H-bridge with bidirectional boost converters for energy storage

Comparative estimation of efficiency of LED dimmers at different modulation techniques

Optimum input-filter-capacitor sizing for fuel-cell based single-phase inverter for current-ripple mitigation

Efficiency measurements on active du/dt output filtering

Investigations into commutation torque ripple reduction in a BDCM drive using various combined PWM-square-PWM control strategies

A sensorless control method for maximum power point tracking of wind turbine generators

Six-phase PMSG wind energy conversion system based on medium-voltage multilevel converter

Dynamic modeling of modular multilevel converters

Energy-efficient control of induction motor servo drives with optimized motion and flux trajectories

Predictive zero-crossing detection algorithm by time localised iterative least-square technique

Behavioral analysis of a single-switch step up converter

First principle and electrical simulation with characterization of GaN/(4H)SiC heterostructure vertical PN power diode

Predictive control of a grid-connected cascaded H-bridge multilevel converter

Calorimetric comparison of the use of Silicon Carbide diodes in a 100kW matrix converter for aerospace applications

A high power density SiC-JFET-based matrix converter

Analog-to-digital converter for input voltage measurements in low-power digitally controlled switch-mode power supply converters

Neural network aided unscented Kalman filter for sensorless control of PMSM

Buck type (8kA, 10V) high frequency quasi-resonant converter

Experimental and simulation methods for evaluation of electrical bicycle motor drives on riding profiles

Diode based HVDC link for the connection of large off-shore wind farms with self start capability

A comparative study of predictive current control for three-phase voltage source inverters based on switching frequency and current error

Line impedance estimation using model based identification technique

High performance stationary frame AC current regulation incorporating transport delay compensation

A 2.5kV to 22V, 1kW radar decoy power supply using silicon carbide semiconductor devices

A three-phase hybrid filter for medium voltage applications using an H-bridge

Autonomous operation of hybrid microgrid with AC and DC sub-grids

A new methodology to optimize the efficiency of a multi-sources and multi-converters system under harmonic constraints. Application to light rail system

Practical evaluation of rectangular-voltage-fed distribution system loaded by choke-input type three-phase diode rectifier through delta/star winding isolation transformer

A current symmetrical hybrid multilevel DC-AC converter

Power conditioning system with cascaded H-bridge multilevel converter — DC-link voltage balancing method

Buck AC/DC converter for aircraft applications

Flux-weakening in IPM motor drives: Comparison of state-of-art algorithms and a novel proposal for controller design

Buddy bidirectional supply for traction substations

Motor drive common-mode EMI reduction by passive noise cancellation

PSIM based dynamic simulator for analysis of SPHEV operation

N-type doping of silicon by proton implantation

One more way to increase the recovery softness of fast high-voltage diodes

Current control design with a fractional-order PID for a three-level inverter

Optimal structure selection for small-size hybrid renewable energy plants

Space vector modulation scheme for six-switch two three-phase output inverter

An electric vehicle model and a driving cycle for mail delivery use

Teaching drive control using Energetic Macroscopic Representation — Summer schools

Impact of source metallization ageing on thermo-mechanical characteristics of a vertical power device

A monolithically integrated vertical bidirectional IGBT having all the main electrodes on the front side

A new 3-phase direct modular multilevel converter

Speed estimation using ANFIS with the adaptive controller of magnetically saturated induction motor

DC circulating current for capacitor voltage balancing in modular multilevel matrix converter

Modular quasi-8-level inverter topology by binary voltage adding through transformers with test bench results

Analysis, control and comparison of DC/DC boost converter topologies for fuel cell hybrid electric vehicle applications

Toyota's activities on power electronics for future mobility

Drivetrain architectures and their impact on the choice of the electrical machine

Power transmission with power electronics

Technical challenges of realising multi-terminal networking with VSC

Modular multilevel converters and HVDC/FACTS: A success story

Investigation of Neel Effect technology for current sensors in next-generation aeronautical applications

Reliability of insulating substrates — High temperature power electronics for more electric aircraft

Stability of three-phase grid-connected inverters

Wind power collection and transmission with series connected current source converters

Direct power control strategies of a grid-connected three-level voltage source converter VSI-NPC

Reliability evaluation of power system with large-scale wind farm integration using first-order reliability method

Stability analysis of an offshore grid supplied by a HVDC-VSC

Power electronic converters in wind energy systems — Considerations of reliability and strategies for increasing availability

Parametric sensitivity of transients in an islanded system with an offshore wind farm connected to an oil platform

Power system islanding operation support by wind power plants

Power conversion system for transformer-less offshore wind turbine

Hybrid simulation methods to perform grid integration studies for large scale offshore wind power connected through VSC-HVDC

2009 13th European Conference on Power Electronics and Applications

2007 European Conference on Power Electronics and Applications

2005 European Conference on Power Electronics and Applications

Ascertainment of static characteristic fluctuation of photovoltaic cells and evaluation of high-speed maximum power point tracking control

Content Provider	IEEE Xplore Digital Library
Author	Tanaka, S. Yoshida, T. Ohniwa, K. Miyashita, O.
Copyright Year	2011
Description	Author affiliation: TOKYO DENKI UNIVERSITY, Department of Electrical and Electronic Engineering, Kanda Nishiki-cho, Chioyoda-ku, Tokyo, 101-8457 Japan (Tanaka, S.; Yoshida, T.; Ohniwa, K.; Miyashita, O.)
Abstract	In this paper, tracking speed of maximum power point tracking (MPPT) control of photovoltaic (PV) generation systems is investigated. To observe quick changes of the static characteristics of PV, a high-speed measurement system is developed. Ability of MPPT control is evaluated with voltage-current chart recorded by the proposed system at speed of about 100 charts per second. By the discussions, speedup of MPPT control is effective when especially the PV system is mounted on automobiles running on streets.
Starting Page	1
Ending Page	10
File Size	655103
Page Count	10
File Format	PDF
ISBN	9781612841670
e-ISBN	9789075815146
e-ISBN	9789075815153
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2011-08-30
Publisher Place	United Kingdom
Access Restriction	Subscribed
Rights Holder	EPE ASSOCIATION
Subject Keyword	Voltage measurement environment Photovoltaic efficiency Current measurement Power amplifiers Electrical resistance measurement Automobiles solar cell system Vehicle dynamics Voltage control
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in