NDLI: Design of a Cooling System for a REBCO Insert Coil in a Cryogen-Free 25 T Superconducting Magnet

Content Provider	IEEE Xplore Digital Library
Author	Iwai, S. Takahashi, M. Miyazaki, H. Tosaka, T. Tasaki, K. Hanai, S. Ioka, S. Watanabe, K. Awaji, S. Oguro, H.
Copyright Year	2002
Abstract	A cryogen-free 20 T superconducting magnet with a 52 mm room-temperature bore was developed and installed in Tohoku University in 2013. This magnet consists of a Bi2223 insert coil, which generates 4.5 T, and outer low-temperature superconducting (LTS) coils. Both coils were cooled by a GM/JT cryocooler with 4.2 W-class cooling capacity at 4.3 K. To generate a higher magnetic field, a new cryogen-free 25 T superconducting magnet using a REBCO insert coil, which generates 11.5 T, and new outer LTS coils is now under development. The magnetic field contribution of this REBCO insert coil is considerably higher than that of the previous Bi2223 insert coil, and the ac-loss of the insert coil during field ramping rises to approximately 9.7 W. The LTS coils have to operate at about 4 K, but the REBCO coil can operate at various temperatures above 4 K. In addition, the cooling capacity of a GM cryocooler is greater than that of a GM/JT cryocooler around 10 K. Thus, the REBCO insert coil is cooled to about 10 K by using two GM cryocoolers, independently of the LTS coils, which are cooled by two GM/JT cryocoolers. To protect the cryocoolers from the leakage field of the magnet, the two GM cryocoolers cool circulating helium gas through heat exchangers, and the gas is transported over a long distance to another heat exchanger provided for the REBCO insert coil. The maximum temperature of the REBCO insert coil was calculated under the most severe condition where an insert coil ac-loss of 9.7 W was generated continuously. And it was confirmed to be less than the target maximum temperature of 12 K.
Sponsorship	Council on Superconductivity Appl. Superconductivity Conference Inc MIT
Starting Page	1
Ending Page	4
Page Count	4
File Size	669399
File Format	PDF
ISSN	10518223
Volume Number	25
Issue Number	3
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2015-01-01
Publisher Place	U.S.A.
Access Restriction	One Nation One Subscription (ONOS)
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Coils Superconducting magnets Cooling Heating Helium Temperature distribution Aluminum REBCO coil High-field magnet Superconducting magnet Cooling system superconducting magnet high-field magnet
Content Type	Text
Resource Type	Article
Subject	Condensed Matter Physics Electronic, Optical and Magnetic Materials Electrical and Electronic Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Design of a REBCO Insert Coil for a Cryogen-Free 25-T Superconducting Magnet

Design of YBCO Insert Coil for a Cryogen-Free 22 T Superconducting Magnet

Testing of Stacked Pancake Coils for a Cryogen-Free 25-T Superconducting Magnet

AC Losses of an HTS Insert in a 25-T Cryogen-Free Superconducting Magnet

Future Upgrade of the Superconducting High Field Facility HOMER II to 25 T

8 T Cryogen Free Magnet With a Variable Temperature Insert Using a Heat Switch

Performance Test of 20-Stacked Two-Tapes-Bundled REBCO Pancake Coils for Upgrading of 25-T Cryogen-Free Superconducting Magnet to 30 T

Observations from the Analyses of Magnetic Field and AC Loss Distributions in the NHMFL 32 T All-Superconducting Magnet HTS Insert

Development of 15 T Cryogen-Free Superconducting Magnets

Design of a Cooling System for a REBCO Insert Coil in a Cryogen-Free 25 T Superconducting Magnet

Similar Documents

Design of a REBCO Insert Coil for a Cryogen-Free 25-T Superconducting Magnet

Design of YBCO Insert Coil for a Cryogen-Free 22 T Superconducting Magnet

Testing of Stacked Pancake Coils for a Cryogen-Free 25-T Superconducting Magnet

AC Losses of an HTS Insert in a 25-T Cryogen-Free Superconducting Magnet

Future Upgrade of the Superconducting High Field Facility HOMER II to 25 T

8 T Cryogen Free Magnet With a Variable Temperature Insert Using a Heat Switch

Performance Test of 20-Stacked Two-Tapes-Bundled REBCO Pancake Coils for Upgrading of 25-T Cryogen-Free Superconducting Magnet to 30 T

Observations from the Analyses of Magnetic Field and AC Loss Distributions in the NHMFL 32 T All-Superconducting Magnet HTS Insert

Development of 15 T Cryogen-Free Superconducting Magnets

Design of a Cooling System for a REBCO Insert Coil in a Cryogen-Free 25 T Superconducting Magnet