Please wait, while we are loading the content...
| Content Provider | The American Society of Mechanical Engineers (ASME) Digital Collection |
|---|---|
| Author | Ward, John Akram, Muhammad Garwood, Roy |
| Copyright Year | 2011 |
| Abstract | It can be difficult to burn relatively cheap, poor quality, unprepared biomass materials in industrial heating processes because of their variable composition, relatively low calorific values and high moisture contents. Consequently the stability and efficiency of the combustion process can be adversely affected unless they are co-fired with a hydrocarbon support fuel. There is a lack of information on the “optimum” conditions for co-firing of coal and high moisture biomass as well as on the proportions of support fuel which should be used. This paper is therefore concerned with the pilot scale (<25 kW thermal input) fluidised bed combustion of blends of coal with pressed sugar beet pulp, a solid biomass with an average moisture content of 71%. The experimental work was undertaken in collaboration with British Sugar plc who operate a coal-fired 40 MW thermal capacity fluidised bed producing hot combustion gases for subsequent drying applications. The project studied the combustion characteristics of different coal and pressed pulp blends over a wide range of operating conditions. It was found that stable combustion could only be maintained if the proportion of pulp by mass in the blended fuel was no greater than 50%. However evaporation of the moisture in the pressed pulp cools the bed so that the excess air which is necessary to maintain a specified bed temperature at a fixed thermal input can be reduced as the proportion of biomass in the blended fuel is increased. Therefore, with a 50/50 blend the bed can be operated with 20% less fluidising air and this will be beneficial for the output of the full scale plant since at present the flow rate of the air and hence the amount of coal which can be burnt is restricted by supply system pressure drop limitations. A further benefit of co-firing pressed pulp is that NOx emissions are reduced by about 25%. Agglomeration of the bed can be a problem when co-firing biomass because of the formation of “sticky” low melting point alkali metal silicate eutectics which result in subsequent adhesion of the ash and sand particles. Consequently longer term co-firing tests with a 50/50 blended fuel by mass were undertaken. Problems of bed agglomeration were not observed under these conditions with relatively low levels of alkali metals in the ash. |
| Sponsorship | Heat Transfer Division |
| File Format | |
| ISBN | 9780791838921 |
| DOI | 10.1115/AJTEC2011-44093 |
| e-ISBN | 9780791838945 |
| Conference Proceedings | ASME/JSME 2011 8th Thermal Engineering Joint Conference |
| Language | English |
| Publisher Date | 2011-03-13 |
| Publisher Place | Honolulu, Hawaii, USA |
| Access Restriction | Subscribed |
| Subject Keyword | Temperature Fluidized bed combustion Combustion Biomass Combustion gases Fuels Pulp Specific heat Coal Co-firing Agglomeration (materials) Fluidized beds Stability Alkali metals Heat capacity Evaporation Adhesion Flow (dynamics) Emissions Sands Heating Pressure drop Collaboration Particulate matter Nitrogen oxides Melting point Drying |
| Content Type | Text |
| Resource Type | Article |
National Digital Library of India (NDLI) is a virtual repository of learning resources which is not just a repository with search/browse facilities but provides a host of services for the learner community. It is sponsored and mentored by Ministry of Education, Government of India, through its National Mission on Education through Information and Communication Technology (NMEICT). Filtered and federated searching is employed to facilitate focused searching so that learners can find the right resource with least effort and in minimum time. NDLI provides user group-specific services such as Examination Preparatory for School and College students and job aspirants. Services for Researchers and general learners are also provided. NDLI is designed to hold content of any language and provides interface support for 10 most widely used Indian languages. It is built to provide support for all academic levels including researchers and life-long learners, all disciplines, all popular forms of access devices and differently-abled learners. It is designed to enable people to learn and prepare from best practices from all over the world and to facilitate researchers to perform inter-linked exploration from multiple sources. It is developed, operated and maintained from Indian Institute of Technology Kharagpur.
Learn more about this project from here.
NDLI is a conglomeration of freely available or institutionally contributed or donated or publisher managed contents. Almost all these contents are hosted and accessed from respective sources. The responsibility for authenticity, relevance, completeness, accuracy, reliability and suitability of these contents rests with the respective organization and NDLI has no responsibility or liability for these. Every effort is made to keep the NDLI portal up and running smoothly unless there are some unavoidable technical issues.
Ministry of Education, through its National Mission on Education through Information and Communication Technology (NMEICT), has sponsored and funded the National Digital Library of India (NDLI) project.
| Sl. | Authority | Responsibilities | Communication Details |
|---|---|---|---|
| 1 | Ministry of Education (GoI), Department of Higher Education |
Sanctioning Authority | https://www.education.gov.in/ict-initiatives |
| 2 | Indian Institute of Technology Kharagpur | Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project | https://www.iitkgp.ac.in |
| 3 | National Digital Library of India Office, Indian Institute of Technology Kharagpur | The administrative and infrastructural headquarters of the project | Dr. B. Sutradhar bsutra@ndl.gov.in |
| 4 | Project PI / Joint PI | Principal Investigator and Joint Principal Investigators of the project |
Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon |
| 5 | Website/Portal (Helpdesk) | Queries regarding NDLI and its services | support@ndl.gov.in |
| 6 | Contents and Copyright Issues | Queries related to content curation and copyright issues | content@ndl.gov.in |
| 7 | National Digital Library of India Club (NDLI Club) | Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach | clubsupport@ndl.gov.in |
| 8 | Digital Preservation Centre (DPC) | Assistance with digitizing and archiving copyright-free printed books | dpc@ndl.gov.in |
| 9 | IDR Setup or Support | Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops | idr@ndl.gov.in |
|
Loading...
|