NDLI: Characteristics of a molybdenum X-pinch X-ray source as a probe source for X-ray diffraction studies.

Please wait, while we are loading the content...

Year: 2017 Volume: 88

Year: 2016 Volume: 87

Year: 2015 Volume: 86

Year: 2015 Volume: 86 Issue: 12

Year: 2015 Volume: 86 Issue: 11

Year: 2015 Volume: 86 Issue: 10

Year: 2015 Volume: 86 Issue: 9

Year: 2015 Volume: 86 Issue: 8

Year: 2015 Volume: 86 Issue: 7

Year: 2015 Volume: 86 Issue: 6

Year: 2015 Volume: 86 Issue: 5

Year: 2015 Volume: 86 Issue: 4

Year: 2015 Volume: 86 Issue: 3

Contributed review: quantum cascade laser based photoacoustic detection of explosives.

A magnetic stirring setup for applications in ultrafast spectroscopy of photo-sensitive solutions.

Time-of-flight Extreme Environment Diffractometer at the Helmholtz-Zentrum Berlin.

Switchable Q-switched and modelocked operation in ytterbium doped fiber laser under all-normal-dispersion configuration.

PHARAO laser source flight model: design and performances.

Electron and recoil ion momentum imaging with a magneto-optically trapped target.

A design study for a compact two stage in-flight separator with a high mass resolution and large acceptance.

An ion trap built with photonic crystal fibre technology.

Flexible attosecond beamline for high harmonic spectroscopy and XUV/near-IR pump probe experiments requiring long acquisition times.

Tunable beam displacer.

A simplified scheme for generating narrow-band mid-ultraviolet laser radiation.

The resilient hybrid fiber sensor network with self-healing function.

An in situ sample environment reaction cell for spatially resolved X-ray absorption spectroscopy studies of powders and small structured reactors.

2-D energy analyzer for low energy electrons.

Development of an interpretive simulation tool for the proton radiography technique.

On the analysis of inhomogeneous magnetic field spectrometer for laser-driven ion acceleration.

An analytical study of double bend achromat lattice.

On the detection of mesospheric meteoric smoke particles embedded in noctilucent cloud particles with rocket-borne dust probes.

Implementation of EPICS based vacuum control system for variable energy cyclotron centre, Kolkata.

Impact of x-ray dose on the response of CR-39 to 1-5.5 MeV alphas.

An in-vacuo optical levitation trap for high-intensity laser interaction experiments with isolated microtargets.

Design and implementation of fractional order pole placement controller to control the magnetic flux in Damavand tokamak.

A simple experimental method to determine magnetic field topology in toroidal plasma devices.

Dynamical programming based turbulence velocimetry for fast visible imaging of tokamak plasma.

Time-resolved ion velocity distribution in a cylindrical Hall thruster: heterodyne-based experiment and modeling.

Characteristics of a molybdenum X-pinch X-ray source as a probe source for X-ray diffraction studies.

Plasma current start-up by the outer ohmic heating coils in the Saskatchewan TORus Modified (STOR-M) iron core tokamak.

Experimental demonstration of Martian soil simulant removal from a surface using a pulsed plasma jet.

Open-frame system for single-molecule microscopy.

Charge collection microscopy of in-situ switchable PRAM line cells in a scanning electron microscope: technique development and unique observations.

Characterization of three-dimensional structure using images.

A subsurface add-on for standard atomic force microscopes.

Nanomechanical and topographical imaging of living cells by atomic force microscopy with colloidal probes.

The ReactorAFM: non-contact atomic force microscope operating under high-pressure and high-temperature catalytic conditions.

Flexible digital signal processing architecture for narrowband and spread-spectrum lock-in detection in multiphoton microscopy and time-resolved spectroscopy.

Optoelectronic transport properties in amorphous/crystalline silicon solar cell heterojunctions measured by frequency-domain photocarrier radiometry: multi-parameter measurement reliability and precision studies.

Cantilever stress measurements for pulsed laser deposition of perovskite oxides at 1000 K in an oxygen partial pressure of 10(-4) millibars.

Two-step fabrication technique of gold tips for use in point-contact spectroscopy.

Combinatorial thin film composition mapping using three dimensional deposition profiles.

High-pressure generation using double stage micro-paired diamond anvils shaped by focused ion beam.

Magneto-optical Kramers-Kronig analysis.

Experimental measurement of characteristic I(c) (Îµ, Î¸, B) response in GdBa2Cu3OÎ´ coated conductor tapes under low magnetic field at 77 K.

Systematic approach to using isentropic stress reverberation techniques in approximating equation of state.

Parallelization of photocatalytic gas-producing reactions.

A high-temperature in situ cell with a large solid angle for fluorescence X-ray absorption fine structure measurement.

A new method for evaluating the degeneration of articular cartilage using pulse-echo ultrasound.

A device for rapid and quantitative measurement of cardiac myocyte contractility

Development of pulsed neutron uranium logging instrument.

Nested Helmholtz coil design for producing homogeneous transient rotating magnetic fields.

Optically isolated, 2 kHz repetition rate, 4 kV solid-state pulse trigger generator.

Developing instrumentation to characterize thermoelectric generator modules.

A high power microwave triggered RF opening switch.

Using fast moving electrode to achieve overvoltage breakdown of gas switch stressed with high direct voltages.

Post-assembly magnetization of a 100 kW high speed permanent magnet rotor.

Experimental study on parasitic mode suppression using FeSiAl in Relativistic Klystron Amplifier.

Low frequency noise elimination technique for 24-bit Σ-Δ data acquisition systems.

Reliable and integrated technique for determining resonant frequency in radio frequency resonators. Application to a high-precision resonant cavity-based displacement sensor.

An integrated wire harp and readout electronics inside vacuum.

Miniature coils for producing pulsed inplane magnetic fields for nanospintronics.

Free-space reflection method for measuring moisture content and bulk density of particulate materials at microwave frequency.

Estimation of channel mismatches in time-interleaved analog-to-digital converters based on fractional delay and sine curve fitting.

A prototype hand-held tri-modal instrument for in vivo ultrasound, photoacoustic, and fluorescence imaging.

Analyzing surface plasmon resonance data: choosing a correct biphasic model for interpretation.

A standing wave linear ultrasonic motor operating in in-plane expanding and bending modes.

Efficient block processing of long duration biotelemetric brain data for health care monitoring.

Design of a four-degree-of-freedom nano positioner utilizing electromagnetic actuators and flexure mechanisms.

Tetrafluoroethane (R134a) hydrate formation within variable volume reactor accompanied by evaporation and condensation.

A fluorescence XAFS measurement instrument in the soft X-ray region toward observation under operando conditions.

Spatially resolved and observer-free experimental quantification of spatial resolution in tomographic images.

Hard disk drive based microsecond X-ray chopper for characterization of ionization chambers and photodiodes.

A novel experimental approach to investigate radiolysis processes in liquid samples using collimated radiation sources.

A compact time-of-flight mass spectrometer for ion source characterization.

Explosively driven air blast in a conical shock tube.

Tip localization of an atomic force microscope in transmission microscopy with nanoscale precision.

Photoacoustic signal and noise analysis for Si thin plate: signal correction in frequency domain.

A methodology for high resolution digital image correlation in high temperature experiments.

Method for collecting thermocouple data via secured shell over a wireless local area network in real time.

Conduction-coupled Tesla transformer.

A novel design of Rogowski coil for measurement of nanosecond-risetime high-level pulsed current.

Experimental apparatus with full optical access for combustion experiments with laminar flames from a single circular nozzle at elevated pressures.

High average power, highly brilliant laser-produced plasma source for soft X-ray spectroscopy.

Note: self-biased magnetic field sensor using end-bonding magnetoelectric heterostructure.

Note: proton microbeam formation with continuously variable kinetic energy using a compact system for three-dimensional proton beam writing.

Note: fast neutron efficiency in CR-39 nuclear track detectors.

Year: 2015 Volume: 86 Issue: 2

Year: 2015 Volume: 86 Issue: 1

Year: 2014 Volume: 85

Year: 2013 Volume: 84

Year: 2012 Volume: 83

Year: 2011 Volume: 82

Year: 2010 Volume: 81

Year: 2009 Volume: 80

Year: 2008 Volume: 79

Year: 2007 Volume: 78

Year: 2006 Volume: 77

Year: 2005 Volume: 76

Year: 2004 Volume: 75

Characteristics of a molybdenum X-pinch X-ray source as a probe source for X-ray diffraction studies.

Content Provider	World Health Organization (WHO)-Global Index Medicus
Author	Loyen, A. Zucchini, F. Chauvin, C. Bland, S. N. Combes, P. Sol, D. Grunenwald, J. Roques, B.
Description	Country affiliation: France Author Affiliation: Zucchini F ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Bland SN ( Blackett Laboratory, Imperial College, London SW7 2BW, United Kingdom.); Chauvin C ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Combes P ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Sol D ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Loyen A ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Roques B ( CEA, DAM, GRAMAT, F-46500 Gramat, France.); Grunenwald J ( CEA, DAM, GRAMAT, F-46500 Gramat, France.)
Abstract	X-ray emission from a molybdenum X-pinch has been investigated as a potential probe for the high pressure states made in dynamic compression experiments. Studies were performed on a novel 300 kA, 400 ns generator which coupled the load directly to a low inductance capacitor and switch combination. The X-pinch load consisted of 4 crossed molybdenum wires of 13 µm diameter, crossed at an angle of 62°. The load height was 10 mm. An initial x-ray burst generated at the wire crossing point, radiated in the soft x-ray range (hυ < 10 keV). This was followed, 2-5 ns later, by at least one harder x-ray burst (hυ > 10 keV) whose power ranged from 1 to 7 MW. Time integrated spectral measurements showed that the harder bursts were dominated by K-alpha emission; though, a lower level, wide band continuum up to at least 30 keV was also present. Initial tests demonstrated that the source was capable of driving Laue diffraction experiments, probing uncompressed samples of LiF and aluminium.
ISSN	00346748
Issue Number	3
Journal	Review of Scientific Instruments
Volume Number	86
e-ISSN	10897623
Language	English
Publisher	American Institute of Physics
Publisher Date	2015-03-01
Publisher Place	United States
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Discipline Physics Discipline Chemistry
Content Type	Text
Resource Type	Article
Subject	Medicine Instrumentation

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in