NDLI: IAS 2008 [Title page]

Please wait, while we are loading the content...

2015 IEEE Industry Applications Society Annual Meeting

2014 IEEE Industry Application Society Annual Meeting

2013 IEEE Industry Applications Society Annual Meeting

2012 IEEE Industry Applications Society Annual Meeting

2011 IEEE Industry Applications Society Annual Meeting

2010 IEEE Industry Applications Society Annual Meeting

2009 IEEE Industry Applications Society Annual Meeting

2008 IEEE Industry Applications Society Annual Meeting

IAS 2008 [Title page]

IAS 2008 [Copyright notice]

IAS organization chart

2008 IAS Council

Model Predictive Control for Time-Delay Compensation of a Switched Reluctance Motor Drive in Smart Building Applications

New Built-In Induction Heating Cooker Using High-Frequency ZVS-PWM Converter with Single Stage Circuit Topology

Modeling and Analysis of a Tubular Oscillating Permanent Magnet Actuator

Stochastic Sliding Mode Arbitration for Energy Management in Smart Building Systems

Lebesgue Sampling with a Kalman Filter in Wireless Sensors for Smart Appliance Networks

Arc Linear Motors for Direct Drive Robots: Galileo Sphere

Performance Comparison of Permanent Magnet Synchronous Motors and Controlled Induction Motors in Washing Machine Applications Using Sensorless Field Oriented Control

Large Package Transfer Molded DIP-IPM

Lower-Cost Sensorless Vector Control Method for Three-Phase PMSMs That Uses One-Shunt Current Detection

Smart Home Appliance Control

Integrating System Functions Using a Single DSP Controller

A DSP-Based Switching Motor Controller

Comparison of Starting Method for Position Sensorless BLDC Motor Driven Reciprocating Compressor

Sensorless Stator Field-Oriented Control for Low Cost Induction Motor Drives with Wide Field Weakening Range

Performance of IPM-PMASR Motors with Ferrite Injection for Home Appliance Washing Machine

Design and Manufacturing of a Linear Transverse Flux Permanent Magnet Machines

A Stator Core Quality Assessment Technique for Inverter-Fed Induction Machines

A New Robust Method To Detect Rotor Faults in Salient-Pole Synchronous Machines Using Structural Asymmetries

Application of Piezoelectric Sensors to Rotor Fault Diagnostics in Squirrel-Cage Induction Machines

Experimentally Validated Dynamic Fault Model for PMSM with Stator Winding Inter-Turn Fault

Fast Single-Turn Sensitive Stator Inter-Turn Fault Detection of Induction Machines Based on Positive and Negative Sequence Third Harmonic Components of Line Currents

Diagnosis of Bearing Faults of Induction Machines by Vibration or Current Signals: A Critical Comparison

Study of Different Architectures of Fault Tolerant Actuator Using a Double-Star PM Motor

Investigation and Comparison of Inverter-Fed Induction Machine Loss

Synchronous Torques in Split Phase Induction Motors

Comparison of Induction Machine Performance with Distributed and Fractional-Slot Concentrated Windings

A Modeling Approach for Gearbox Monitoring Using Stator Current Signature in Induction Machines

Modeling of Mutual Saturation in Induction Machines

Comparison of Test Methods for Characterisation of a Doubly-Fed Induction Machine

Change of Mechanical Natural Frequencies of Induction Motor

Combination of Finite Element and Analytical Models in the Optimal Multi-Domain Design of Machines : Application to an Interior Permanent Magnet Starter Generator

Analysis of Rotor Core Eddy-Current Losses in Interior Permanent Magnet Synchronous Machines

Design Tradeoffs between Stator Core Loss and Torque Ripple in IPM Machines

A Study on the Acoustic Noise Reduction of Interior Permanent Magnet Motor with Concentrated Winding

Design of Saliency-Based Sensorless Drive IPM Motors for General Industrial Applications

A Study on Reduction of Vibration Based on Decreased Cogging Torque for Interior Type Permanent Magnet Motor

Analytical Study of Special Linear Motor-Transformer for Wireless Tram

Development and Test of a High Force Tubular Linear Drive Concept with Discrete Wound Coils for Industrial Applications

Power Supply of Long Stator Linear Motors - Application to Multi Mobile System

A Study on the Characteristics of PMLSM According to Permanent Magnet Arrangement

Linear Motors for Astronomical Mirrors

A General Model of the Laminated Steel Losses in Electric Motors with PWM Voltage Supply

On Liquid-Nitrogen-Cooled Copper-Wound Machines with Soft Magnetic Composite Core

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

End Space Heat Transfer Coefficient Determination for Different Induction Motor Enclosure Types

Isolating the Impact of PWM Modulation on Motor Iron Losses

New Epstein Frame for Core Loss Measurements at High Frequencies and High Flux Densities

Impact of Rotor Losses in a 12-Slot 10-Pole Axial Flux PM Machine

Influence of PWM on the Proximity Loss in Permanent Magnet Brushless AC Machines

Multi-Phase Flux-Switching Permanent Magnet Brushless Machine for Aerospace Application

Loss Analysis of Permanent Magnet Motors with Concentrated Windings - Variation of Magnet Eddy Current Loss Due to Stator and Rotor Shapes

Fault-Tolerant Flux-Switching Permanent Magnet Brushless AC Machines

Impact of Winding Layer Number and Slot/Pole Combination on AC Armature Losses of Synchronous Surface PM Machines Designed for Wide Constant-Power Speed Range Operation

Comparative Study of Flux-Switching and Doubly-Salient PM Machines Particularly on Torque Capability

Analysis of Axial Leakage in High-Speed Slotless PM Motors for Industrial Hand Tools

Optimal Skew Angle for Improving of Start-Up Performance of a Single-Phase Line-Start Permanent Magnet Motor

Winding Inductances of Fractional Slot Surface-Mounted Permanent Magnet Brushless Machines

Analysis of Flux Measurements on a PMSM With Non-Overlapping Concentrated Windings

Unbalanced Magnetic Pull in Fractional-Slot Brushless PM Motors

Flat Magnets in Surface-Mounted Permanent Magnet Machines

New Designs of a Two-Phase E-Core Switched Reluctance Machine by Optimizing the Magnetic Structure for a Specific Application: Concept, Design, and Analysis

A Novel High Power Density Segmented Switched Reluctance Machine

16,000-RPM Interior Permanent Magnet Reluctance Machine with Brushless Field Excitation

Calculation of Flux Linkages of a 12/8 Dual-Channel SRM Including Mutual Coupling and Saturation: From Magnetic Circuit Model to FEM Analysis

M-Phase N-Segment Flux-Reversal-Free Stator Switched Reluctance Machines

Two-Phase SR Drive with Flux-Reversal Free Stator and Balanced Normal Forces

Design of a Lightweight Transverse Flux Permanent Magnet Machine for Direct-Drive Wind Turbines

A Methodology to Design Linear Generators for Energy Conversion of Ambient Vibrations

On the Possibilities of Using a Brushless Doubly-Fed Reluctance Generator in a 2 MW Wind Turbine

Synchronous Reference Frame Grid Current Control for Single-Phase Photovoltaic Converters

Brushless DC Motor for a Solar Airplane Application: Comparison between Simulations and Measurements

Performance Characterisation of Brushless Doubly-Fed Generator

Outer Rotor Flux Reversal Machine for Rooftop Wind Generator

High-Strength Undiffused Brushless (HSUB) Machine

Development of Planar Microcoils for an Electromagnetic Linear Actuator Fabricated in Batch-Type Wafer Technology

Development of a Wound Rotor Brushless Doubly Fed Machine Based on Slot MMF Harmonics

A None-Intrusive Load and Efficiency Evaluation Method for In-Service Motors Using Vibration Tests with an Accelerometer

An Analytical-Numeric Method for Stator End-Coil Leakage Inductance Computation in Multi-Phase Electric Machines

Development of a Spirally-Shaped Linear Actuator

On a New Type of Inverter-Induced Bearing Current in Large Drives with Oil-Lubricated Bearings

Computation of Electrical Conditions Inside a Wire-Plate Electrostatic Precipitator Using an Unstructured Finite Volume Method

Graphitic Materials for RF Thermal Ablation of Tumors

Basic Study of Sterilization at Low Discharge Voltage by Using Microplasma

Pulsed Power Applied to Process Industry

Survivability of Inoculated Versus Naturally Grown Bacteria in Liquid Foods under Pulsed Electric Fields

Detection of Discharge Activities During Food Processing by Pulsed Electric Field

Capillary/Narrow Flow Channel Driven EHD Gas Pump for an Advanced Thermal Management of Micro-Electronics

An Electrically Driven Impinging Liquid Jet for Direct Cooling of Heated Surfaces

Numerical Models for AC Electro-Osmotic Micropumps

Innovative Electrode Arrangement for Electrohydrodynamic Pumping

Verifying Solution Component Concentration by Measuring Frequency Dependent Conduction of Electrically Charged Species

Analysis of the Effects of Solution Conductivity on Electro-Spinning Process and Fiber Morphology

Electrostatic Precipitators for Cleaning Diesel Exhaust

Electrohydrodynamically-Assisted Electrostatic Precipitator for Collection of Low Resistive Dust

Collection of Fine Particles by Novel Wet Electrostatic Precipitator

Enhanced Performance for Electrostatic Precipitators by Means of Conventional and Fuzzy Logic Control

Premises for the Electrostatic Separation of Wheat Bran Tissues

Set-Point Identification and Robustness Testing of a Free-Fall Triboelectrostatic Separation Process

Comparative Study between the Shewhart and CUSUM Charts for the Statistic Control of Electrostatic Separation Processes

Analysis of the Effect of ESD on the Operation of MEMs

A Study on Discharge Current and Radiation Noise of ESD from Charged Metal and Charged Human Body

Experimental Study of Corona Discharge Generated in a Modified Wire-Plate Electrode Configuration for Electrostatic Processes Applications

Basic Research on Low Voltage Electrostatic Discharge Phenomena

Evaluation of Surface Charge Density with Electrostatic Voltmeter - Measurement Geometry Considerations

Corona Charging and Charge Decay Characteristics of Non-Woven Filter Media

Non Contacting Measurement of Surface Resistivity Using Phi Type Electrodes

Analysis of Data Obtained Using the Thermal Step Method on a MOS Structure - An Electrostatic Approach

Electro-Chemical Preparation of Fine Needles for Field Ion Microscopy to Observe Biomolecules

Application of Atmospheric-Pressure Plasma for Enhancing Photoelectrochemical Properties of TiO2 Electrodes

Pt-Doped Al2O3 as Dissipative Gap-Material in Tape Heads

Multifunctional Coatings with Carbon Nanotubes for Electrostatic Charge Mitigation

Molecular Dynamics of Poly 3-Hexyl Thiophene by Broadband Dielectric Spectroscopy

Non-Thermal Plasma Process for Dilute Trichloroehtylene Decomposition Combined with Catalyst Position Effect of Plasma Reactor and Catalyst

Decomposition of Adsorbed Xylene on Adsorbent Using Nonthermal Plasma and Gas Circulation

Additive Effect of Water on the Decomposition of VOCs in Nonthermal Plasma

Performance Characteristics of Pilot-Scale Plasma-Chemical NOx Removal System from Boiler Emission

Automatic Control Method of NO Removal by a Combination of Ozone Injection and Exhaust Gas Recirculation

Continuous Regeneration of Ceramics Particulate Filter in Stationary Diesel Engine Using Nonthermal Plasma-Induced Ozone Injection

Observation of N2(A³SIGMA+u) Metastable in Pulsed Positive Corona Discharge Using Laser-Induced Fluorescence

Electrostatic and Gravitational Transport of Lunar Dust in the Airless Atmosphere of the Moon

Electrodynamic Suspension and Stability of a Charged Droplet in Quadrupole Electrode

Nebulised Aerosol Electrostatic Charge Explored Using Bipolar Electrical Mobility Profiles

Standards for Industrial Electrostatic Processes

Dynamic Induction Charging of Particles with Finite Conductivity

Factors that Influence the Fluidized-Bed Tribo-Electrostatic Separation of Plastic Granular Mixtures

Hydrogen Production from a Large Digester Gas Plant - Plant Layout, Modeling, and Evaluation

Experimental Validation of a State Model for PEMFC Auxiliaries Control

Optimal Design Analysis of a Stand-Alone Photovoltaic Hybrid System

Implementation of Fuel Cell Emulation on DSPand dSPACE Controllers in the Design of Power Electronic Converters

PEMFC Fault Diagnosis, Modeling, and Mitigation

A Multi-Agent Fuzzy Logic Based Energy Management of Hybrid Systems

An AMI System for the Deregulated Electricity Markets

Artificial Neural Network Based Adaptive Load Shedding for an Industrial Cogeneration Facility

Influence of Wind Energy Converter Control Methods on the Output Frequency Components

Combining the Wind Power Generation System with Energy Storage Equipments

Variable Speed Engine Generator with Super-Capacitor; Isolated Power Generation System and Fuel Efficiency

An Effort to Optimize Similar Days Parameters for ANN Based Electricity Price Forecasting

Solar Trigeneration for Residential Applications, a Feasible Alternative to Traditional Micro-Cogeneration and Trigeneration Plants

Effects of Voltage Unbalance and System Harmonics on the Performance of Doubly Fed Induction Wind Generators

Design of Optimal Coasting Speed for MRT Systems Using ANN Models

A Converter Topology Suitable for Interfacing Energy Storage with the DC Link of a StatCom

Optimization of Reactive Power Compensation in Wind Farms Using Sensitivity Analysis and Tabu Algorithm

PV-Microgrid Operational Cost Minimization by Neural Forecasting and Heuristic Optimization

Distributed Energy Resources and Renewable Energy in Distribution Systems: Protection Considerations and Penetration Levels

Voltage and Current Programmed Modes in Control of the Z-Source Converter

Experimental Performance Evaluation of a Nonlinear Controller Based IM Drive Incorporating Iron Loss in the Motor Model

Real Time Implementation of an Artificial Immune System Based Controller for a DSTATCOM in an Electric Ship Power System

New Power Quality Index in a Distribution Power System by Using RMP Model

Improved Control of DFIG Wind Turbines for Operation with Unbalanced Network Voltages

A Neural Inverse Control of a PEM-FC System by the Generalized Mapping Regressor (GMR)

Study on Dynamic Production Planning System Oriented to Shipbuilding Process

Implementation of an Automatic Counting and Control Production System for Metal-Mechanics Industries

Modeling and Control of Large Shovel Converter Systems Integrated with Supercapacitor

Hardware Implementation of an AIS-Based Optimal Excitation Controller for an Electric Ship

Security System for Die Cutting Press

Design and Development of a Flexible Multi-Purpose Controller Hardware System for Power Electronics and Other Industrial Applications

A Hand-Held Programmable-Logic-Device Based Temperature and Relative-Humidity Sensor, Processor and Display System Platform for Automation and Control of Industry Processes

Improving the Torque Ripple in DTC of PMSM Using Fuzzy Logic

A Novel Neuro-Wavelet Based Self-Tuned Wavelet Controller for IPM Motor Drives

Real-Time Implementation of Intelligent Modeling and Control Techniques on a PLC Platform

Identification of Induction Machine Electrical Parameters Using Genetic Algorithms Optimization

Development and Testing of Hybrid Fuzzy Logic Controller for Car Suspension System Using Magneto-Rheological Damper

On the Fuzzy-Based Control Strategy Design and Implementation of a Non-Contacting Steel Plate Conveyance System

Current Sharing and Sensing in N-Paralleled Converters Using Single Current Sensor

A Low Cost Linear Position Measurement System for Magnetically Levitated Rotor in Axial Flow Pump

Position Acquisition for Long Primary Linear Drives with Passive Vehicles

A Real Time Predictive Maintenance System of Aluminium Electrolytic Capacitors Used in Uninterrupted Power Supplies

Automated Monitoring of High-Resistance Connections in the Electrical Distribution System of Industrial Facilities

Bearing Fault Diagnostics Based on Reconstructed Features

Analysis and Development of a Resolution-Level Vector-Controlled WM Inverter-Fed IPM Motor Drive

A Novel Overmodulation and Field Weakening Strategy for Direct Torque Control of Induction Machines

On-Line Identification of PMSM Parameters: Model-Reference vs EKF

Direct Tuning Strategy for PMSM Drives

Modeling and Minimization of Speed Ripple of a Faulty Induction Motor with Broken Rotor Bars

CORDIC Implementation of Space Vector Modulation

BEGA Starter/Alternator - Vector Control Implementation and Performance for Wide Speed Range at Unity Power Factor Operation

Design Aspects of an Active Electromagnetic Suspension System for Automotive Applications

Design and Analysis of a New Drive-Integrated Auxiliary Dc-Dc Converter for Hybrid Vehicles

Design and Optimization of a Hybrid-Electric Vehicle for Advanced Urban Mobility

Design and Comparison of Power Systems for a Fuel Cell Hybrid Electric Vehicle

Monolithic Systems Using Standard Three-Leg Inverter Supplying Independently Two Motors

Power Factor Control for High Power Current Source Drive with Active Front End

A Series Connected Three-Level Inverter Topology For Medium Voltage Squirrel Cage Motor Drive Applications

Evaluation of the Auto-Associative Neural Network Based Sensor Compensation in Drive Systems

A New Walking Pattern SVM Technique for Five-Phase Motor Drives

Loss Comparison between an SPWM and Harmonic Elimination Excited Small, (<1kW) Induction Motor Drive Using Pspice Simulation and Calorimetry

Reversible AC Drive Systems Based on Parallel AC-AC DC-Link Converters

Performance of a High Speed Motor Drive System Using a Novel Multi-Level Inverter Topology

Power Control Algorithm for Hybrid Excavator with Super Capacitor

Analysis for Unstable Problem of PMSM Current Control System in Overmodulation Range

Space-Shifted Split-Phase High-Speed Motor/Converter Topology with Fault-Tolerance Capability

High Efficiency Single-Pulse Controlled Switched Reluctance Motor Drive for High Speed (48k RPM) Application: Analysis, Design, and Experimental Verification

A Failure Mode for PWM Inverter-Fed AC Motors Due to the Anti-Resonance Phenomenon

Reliability Improvement of Industrial Drives Using Multi-Objective Optimization

Contactless Planar Actuator with Manipulator: a Motion System without Cables and Physical Contact between the Mover and the Fixed World

On the Contribution of PWM Methods to the Common Mode (Leakage) Current in Conventional Three-Phase Two-Level Inverters as Applied to AC Motor Drives

A Decoupling Control Scheme of Combined Levitation-and-Propulsion SLIM for Maglev Vehicle

Design of Speed Control Loop of A Variable Speed Diesel Engine Generator by Electric Governor

Modeling of Torsional Resonances for Multi-Megawatt Drives Design

Regenerative Operation of DC-Series Machines in Pitchsystems for Multimegawatt Windturbines

Modular High-Power Shunt-Interleaved Drive System: A Realization up to 35 MW for Oil & Gas Applications

Current-Carrying Characteristics of Conductive Microfiber Rings for High Frequencies and Current Amplitudes

Advanced Control Strategies for Stability Improvement of Natural Field Orientation

Induction Motor Temperature Estimation Based on High-Frequency Model of Rotor Bar

Diagnostics of Induction Machines Operated from Inverters and Soft-Starters Using High Frequency Negative Sequence Currents

Model-Based Stator Fault Detection in Induction Motors

Pulsating Torques in PWM Multi-Megawatt Drives for Torsional Analysis of Large Shafts

Soft Starting of Induction Motor with Torque Control

Examination and Linearization of Torque Control System for Direct Torque Controlled IPMSM

Novel Voltage Trajectory Control for Flux Weakening Operation of Surface Mounted PMSM Drives

Precise Torque Control in Flux-Weakening Operation of Surface-Mounted PM Motor with Magnetic Saliencies

Investigation and Implementation of Control Strategies for Flux-Switching Permanent Magnet Motor Drives

IPM Machine Drive Design and Tests for an Integrated Starter-Alternator Application

Steady-State and Transient Analysis of Maximum Torque per Ampere Control for IPMSMs

Fault Tolerant Permanent Magnet Motor Drive Topologies for Automotive X-By-Wire Systems

Shaft Position Correction Scheme Comparison for Sensorless Control of a PMSM Based on State-Space Estimation between Variance Adjustment and Angle PI Regulation

Design of Flux Observer Robust to Parameter Variation of Interior Permanent Magnet Synchronous Motor

Sliding Mode Control with Double Boundary Layer for Robust Compensation of Payload Mass and Friction in Linear Motors

Modeling and Adaptive Decoupling of Transient Resistance and Temperature Effects in Carrier-Based Sensorless Control of PM Synchronous Machines

Sensorless Control of Linear Tubular Permanent Magnet Synchronous Motors Using Pulsating Signal Injection

Carrier Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low Speeds

Loss Minimizing Control of PMSM with the Use of Polynomial Approximations

Standstill Parameter Identification of Vector-Controlled Induction Motor Using Frequency Characteristics of Rotor Bars

Zero Speed Sensorless Control of Induction Machines Using Rotor Saliencies

Self-Commissioning Algorithm for Inverter Non-Linearity Compensation in Sensorless Induction Motor Drives

Sensorless Control of Induction Machines by Using PWM Harmonics for Rotor Bar Slotting Detection

A Robust Sensorless Control Algorithm for Induction Generator Operating in Deep Flux Weakening Region

Acoustic Resonance Characteristics in a High Pressure Sodium Lamp

Nanoimprint Applications for Liquid Crystal Displays

Current Trends in Field Emission Displays

Human Factors of 3-D Displays for Virtual Reality

High-Power EUV Source for Lithography Using Tin Target

Mercury Dosing in Fluorescent Lamps

Investigation of Moving Striations in a 50Hz AC Low-Pressure Ar-Hg Discharge

Energy Saver F32T8 Lamps and Dimming Ballasts for Sustainable Lighting

A Novel Driver Circuit for Multiple Cold-Cathode Fluorescent Lamps of LCD Backlight Modules

Fixed Frequency Self-Oscillating Electronic Ballast Design Procedure

Comparison of Self-Oscillating Electrode and Electrode-Less Compact Fluorescent Lamps from Loss Perspective

Comparison between Different Discharge Lamp Models Based on Lamp Dynamic Conductance

Analysis of the Output Capacitor and Lamp voltage Inversion for the Bidirectional Flyback Converter

Envelope Analysis of a Phase-Controlled Triple LCpCs Resonant Inverter for Electronic Ballast Applications

Self-Oscillating Full-Bridge Electronic Ballast with Constant-Lamp-Current Control and No-Lamp-Protection Circuit

Two-Stage High Power Factor Electronic Ballast for Metal-Halide Lamps

An Optimal LCC Design Method for Dimmable Electronic Ballasts of the HID lamp

A Novel Low-Cost Electronic Ballast for Automotive HID Lamps

A Novel Single-Stage Low-Frequency Square-Wave Driven Electronic Ballast for HID Lamps

A Dynamic Model of a High Temperature Arc Lamp

Characterization of Non-Stable States of Lamp Operation of High Power Lamps

Observer Based Ceramic HID Lamp Control

Warm-Up and Steady-State Control of High-Pressure Sodium Lamps Applied to Public Lighting Systems

Integration Methodology of DC/DC Converters to Supply HPS Lamps: An Experimental Approach

Design of Resonant Igniters for Metal Halide Lamps Supplied with High Frequency Square Waveform Inverters

A Simple Electronic Ballast to Supply HID Lamps

Suitable Switching Converter Topologies for Automotive Signal Lamps and Headlamps Using Power LEDs

Comparison Among Power LEDs for Automotive Lighting Applications

Compact Lamp Using High-Brightness LEDs

Dynamic Control Point Simulation of OLEDs

Design and Performance of a 200 kHz All-SiC JFET Current Source Converter

Unsymmetric Control of a Matrix Converter for Two-Phase Inductive Melting Furnaces

A Single- to Three-Phase Matrix Converter for a Vector-Controlled Induction Motor

Analysis of Power Cycling Capability of IGBT Modules in a Conventional Matrix Converter

Experimental Verification of Current Source Inverter with ZVS Commutation Circuit

Modular Load Commutated Inverters - A Proven Concept for High Power Applications

High Performance Harmonic Isolation and Load Voltage Regulation of the Three-Phase Series Active Filter Utilizing the Waveform Reconstruction Method

A Harmonic Damping Method for a Loop Power System

An Enhanced Shunt Active Filter with Energy Storage for Microgrids

Dynamic Var/Harmonic Compensation with Inverter-Less Active Filters

Harmonic Identification Methods Based on Moving Average Filters for Active Power Filters

Fuel Cell Based Battery-Less UPS System

Transformer-Less Converter Concept for a Grid-Connection of Thin-Film Photovoltaic Modules

Hybrid Modulation for Dual Active Bridge Bi-Directional Converter With Extended Power Range For Ultracapacitor Application

Control and Protection of a DFIG-Based Wind Turbine under Unbalanced Grid Voltage Dips

Power Converters and Controllers for UPS Applications with Backup PEM Fuel Cell

Maximum Power Control of Grid-Connected Solid Oxide Fuel Cell System Using Adaptive Fuzzy Logic Controller

A Novel Reactive Power Control Scheme for CSC Based PMSG Wind Energy System

Intelligent Modularized Emitter Turn-Off Thyristor (ETO)-Based High Power Converter

Fault Detection and Protection of Three-Level Neutral-Point-Clamped PWM Voltage Source Converters

Active Fault Protection for an AC Zonal Marine Power System Architecture

Control Strategy Improving Fault Ride-Through Capability of Cascade Multilevel Inverter Based STATCOM

An Active Common Mode EMI Filter for Switching Converters

Compensation of Switch Faults in a Three-Level Inverter

A Three-Phase Bidirectional DC-DC Converter for Automotive Applications

A New Soft-Switching PWM High Frequency Half-Bridge Inverter Linked DC-DC Converter with Diode-Clamped Active Edge Resonant Snubbers

Closed Loop Control Design of Two Inductor Current-Fed Isolated DC-DC Converter for Fuel Cells to Utility Interface Application

Analysis and Control of Chaos in SEPIC DC-DC Converter Using Sliding Mode Control

Digital Compensator Design to Reduce Phase Lag for Multi-Sampling Controlled DC-DC Converters

Interleaved Bidirectional DC-DC Converter for Automotive Electric Systems

Interleaving Impact on AC Passive Components of Paralleled Three-Phase Voltage-Source Converters

Analysis and Implementation of a Power Switch for Telecommunication Applications

Fault-Tolerant Transformerless Power Flow Controller Based-On ETO Light Converter

Modeling and Stability Analysis of Cascaded Multi-Converter Systems Including Feedforward and Feedback Control

High-Quality Single Phase Power Conversion by Reconsidering the Magnetic Components in the Output Stage - Building a Better Half Bridge

Dynamic Control of a 20kW Interleaved Boost Converter for Traction Applications

The Impact of Voltage Generation on Harmonic Spectra of Current and Flux Density in the Welding Transformer for a Middle Frequency Resistance Spot Welding System

PWM Inverters Using Split-Wound Coupled Inductors

Embedded EZ-Source Inverters

A Class of Quasi-Z-Source Inverters

Design and Implementation of Photovoltaic Power Conditioning System Using a Current Based Maximum Power Point Tracking

A Novel Soft-Switching Scheme for an Isolated DC/DC Converter with Pulsating DC Output for a Three-Phase High-Frequency-Link PWM Converter

Optimal Control of a Dual Three-Level Inverter System for Medium-Voltage Drives

Design of Power Supply for Driving High Power Piezoelectric Actuators

An Effective SPWM Control Technique for 1MVA 6000V Cascaded Neutral Point Clamped Inverter

High-Performance Control Strategies and Applications of a New Hybrid Cascaded Multilevel Inverter

Converter Topologies and Power Semiconductors for Industrial Medium Voltage Converters

A New Modulation Method for Hexagram Inverter

A New Balancing Algorithm of Neutral-Point Potential in the Three-Level NPC Converters

A Dynamic Boost Converter Input Stage for a Double 120° Flattop Modulation Based Three-Phase Inverter

A General Analytical Method for Calculating Inverter DC-Link Current Harmonics

Complex-Vector Time-Delay Control of Power Converters

Variable-Frequency Pulse-Width Modulation for an Improved Grid-Connected Converter Efficiency

Modulation Error Control for Medium Voltage Drives with LC-Filters and Synchronous Optimal Pulse Width Modulation

Simplified Space Vector PWM Algorithm for Multilevel Inverters Using Non-Orthogonal Moving Reference Frame

Sensorless Nonlinear Control of a Three-Phase/ Switch/ Level Vienna Rectifier Based on a Numerical Reconstruction of DC and AC Voltages

Power Quality Conditioning Using Bridged-T Filters for Passive Rectifiers

Comparison of LCL-Filter-Based PWM Rectifier with Different Current Sensor Positions

New Stationary Frame Control Scheme for Three Phase PWM Rectifiers under Unbalanced Voltage Dips Conditions

Application of IGCT in High Power Rectifiers

Unbalanced Voltage Sag Ride-Through of a Doubly Fed Induction Generator Wind Turbine with Series Grid Side Converter

Outline of the Control Design for a Cascaded H-Bridge STATCOM

An Inrush Current Mitigation Technique for the Line-Interactive Uninterruptible Power Supply Systems

A Single-Phase Utility-Interface Circuit without any AC Inductor nor EMI Filter

Design and Control for LCL-Based Inverters with Both Grid-Tie and Standalone Parallel Operations

Power System Stabilisation Using STATCOM with Supercapacitors

Direct Power Control of a Doudly Fed Induction Generator with a Fixed Switching Frequency

Development of a Camber Measurement System in a Hot Rolling Mill

Performance Improvements of an In-Mold Electromagnetic Stirrer with Minimum Hardware Adjustments

Model for Control of a Tandem Hot Metal Strip Rolling Process

Voltage Sag in Highly Automated Factories

Harmonic Analysis of a Mid-Frequency Welder Application for a Metal Working Facility

Protective Relay Settings of Tie Line Tripping and Load Shedding for an Integrated Steel-Making Cogeneration System

A New Field-Data Based EAF Model for Power Quality Studies

Design of an Ultra-Capacitor Energy Storage System (UESS) for Power Quality Improvement of Electric Arc Furnaces

Evaluation of Peripheral Visual Performance When Using Incandescent and LED Miner Cap Lamps

Full Measuring System for Copper Electrowinning Processes Using Optibar® Inter-Cell Bars

High Power Synchronous Machine fed by a Cascaded Regenerative Inverter

Utilization of Supplementary Energy Storage Systems in High Power Mining Converters

Design and Evaluation Criteria for High Power Drives

Feasibility of Using Intelligent Video for Machine Safety Applications

Requirements and Evaluation of an Active Harmonic Filter Application in an Actual Industrial Installation

Technological Aspects of Solid-State and Incandescent Sources for Miner Cap Lamps

Interharmonics Power Losses Estimation in Power Transformer fed High Power Cycloconverter Drive

Improving Efficiency in Iron Ore Mining Facilities

Highland Valley Copper Control Systems Upgrade - Technology, Design, Simulation, and Installation

A Novel Measuring Method of Capacitive Current for Ungrounded Distribution Systems

A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters

A Novel Short-Circuit Detecting Scheme Using Turn-On Switching Characteristic of IGBT

Physical Layout of High Current Rectifiers: Modern Methods for an Old Challenge

Analysis of Current Distribution in Parallel Semiconductors of High Current Rectifiers in Electro-Intensive Plants

The Application of FRD with Avalanche Capability for Improvement of Power Conversion Efficiency in Output Rectifier and PFC

Analysis and Control of Soft-Commutation of Inverter at Small Residual Voltage with Benign DV/DT and Integrated Converter Module

EMI Terminal Modeling

Improved Configuration of the Inductive Core-Saturation Fault Current Limiter with the Magnetic Decoupling

Multi-Layer Barrel-Wound Foil Winding Design

Analytical and Numerical Contributions for Winding Losses Estimation in an Integrated Magnetic Component

Fast Thermal Models for Power Device Packaging

Analysis and In-Situ Measurement of Thermal-Mechanical Strain in Active Silicon Power Semiconductors

Precision Calorimetry for the Accurate Measurement of Losses in Power Electronic Devices

Evaluation of Power Semiconductors Power Cycling Capabilities for Adjustable Speed Drive

10 kV SiC MOSFET Based Boost Converter

A Physics-Based Model for a SiC JFET Device Accounting for the Mobility Dependence on Temperature and Electric Field

High-Voltage Isolated Gate Drive Circuit for 10 kV, 100 A SiC MOSFET/JBS Power Modules

Impact of SiC Devices on Hybrid Electric and Plug-in Hybrid Electric Vehicles

A Circuit-Level Analytical Study on Switching Behaviors of SiC Diode at Basic Cell for Power Converters

Chip Improvements for Future IGBT Modules

Resonance Excited by Transformer Inrush Current in Inter-Connected Offshore Power Systems

Generalization of Methods for Voltage Sag Source Detection Using Vector Space Approach

Power Quality Investigation of Surge Protective Device Failures During Open-Transition for a Waste Water Treatment Facility

Architecture of Electrical Installations: The Node Double Two

Prospected Evolution for Low Voltage Customers: Ecodesign of the Electrical Distribution System

A Novel Control Strategy for a Variable Speed Wind Turbine with a Permanent Magnet Synchronous Generator

Induced Voltages and Power Losses in Single-Conductor Armored Cables

A Better Understanding of Load and Loss Factors

Influence of Subsea Cables on Offshore Power Distribution Systems

Stability Requirements for Implementation of Grid Separation Scheme in a Steel Mill with Internal Generation

Evaluation of the Prospective Joule Integral to Assess the Limit Short Circuit Capability of Cables and Busways

Dynamic Simulator for Thyristor Controlled Series Capacitor

Robust Optimization in HTS Cable Based on DEPSO and Design for Six Sigma

The Status of DC Micro-Grid Protection

Traveling Wave Based Distribution Lines Fault Location Using Hilbert-Huang Transform

An Approach to Improve Measurement Accuracy for Electric Power Fault Recorder

A Mal-Trip of Bus Relay Due to Visible Light

2007 IEEE Industry Applications Annual Meeting

Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting

Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005.

Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting.

38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003.

Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)

Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248)

Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129)

Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370)

Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242)

IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting

IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting

IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting

Proceedings of 1994 IEEE Industry Applications Society Annual Meeting

Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting

Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting

Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting

Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting

Conference Record of the IEEE Industry Applications Society Annual Meeting,

Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in