NDLI: Towards a Novel Type of Ice for Model Tests With Vertically Sided Structures

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

25th International Conference on Offshore Mechanics and Arctic Engineering(OMAE2006)

ASME 2002 21st International Conference on Offshore Mechanics and Arctic Engineering(OMAE2002)

ASME 2003 22nd International Conference on Offshore Mechanics and Arctic Engineering(OMAE2003)

ASME 2004 23rd International Conference on Offshore Mechanics and Arctic Engineering(OMAE2004)

ASME 2005 24th International Conference on Offshore Mechanics and Arctic Engineering(OMAE2005)

ASME 2007 26th International Conference on Offshore Mechanics and Arctic Engineering(OMAE2007)

ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering(OMAE2008)

ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2009)

ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2010)

ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2011)

ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering(OMAE2012)

ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering(OMAE2013)

ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering(OMAE2014)

ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2015)

ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2016)

ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2017)

ASME 2018 1st International Offshore Wind Technical Conference(IOWTC2018)

ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering(OMAE2018)

Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology

Refinement of Approaches to Estimation of Ship Ice Resistance in Ice Channel Based on Data From Physical Model Experiments

Cargo-Flow-Oriented Design of Supply Vessel Operating in Ice Conditions

Study on Resistance Performance of Ice-Breaking Tanker According to Ship’s Length

Ice Propulsion Performance Calculation As per Alternative System of Propeller-Hull Interaction Coefficients

An Analysis on the Change of Ship Speed According to Ice Load Signal in Continuous Icebreaking and Ramming

Towards a Novel Type of Ice for Model Tests With Vertically Sided Structures

Challenges of Speedy Icebreaker-Assisted Operation of Heavy-Tonnage Vessels in Ice

Application of Special-Purpose Equipment for Management of Ice Buildups Around Prirazlomnaya Platform

Investigating the Influence of Bridge Officer Experience on Ice Management Effectiveness Using a Marine Simulator Experiment

Numerical Simulations of Continuous Icebreaking Process With Different Heel Angles in Level Ice

Study on Force and Movement of Unconstrained Ice Fronting a Propeller

Shadowing Effect Analyzing for Propeller-Ice Milling Condition With Peridynamics

Multibody Dynamics Simulation on Ice Resistance of Ship in Pack Ice Environment

Modelling Randomness in the Simulation of Ice-Induced Vibrations

Applications of Wavelet Transform in Ice-Induced Vibrations of Structures

Study on the Influence of Ice-Water Coupling on Numerical Calculation of Ice Load

A New Icebreaking Pattern for the Application in Numerical Simulation of Ship Performance in Level Ice

Study on Influence of Bow Configuration on Dynamic Response of Ship Collision With Ice

Preliminary Analytical Formulation of Ice-Floater Interactions Including the Effect of Wave Load

Simulator for Arctic Marine Structures (SAMS)

3D DEM Study on the Effect of Ridge Keel Width on Rubble Resistance on Ships

Station-Keeping Trials in Ice: Numerical Modelling

Station-Keeping Trials in Ice: Marine Spread

Station-Keeping Trials in Ice: Data Acquisition, Post-Processing, Storage and Visualization

Station-Keeping Trials in Ice: Dynamic Positioning in Ice — Results and Learnings

Distributed Sensing of Loads Acting Against the Hull of a Stationkeeping Vessel in Ice

Station-Keeping Trials in Ice: Overview of Ice Management Support

Station-Keeping Trials in Ice: Test Scenarios

Station-Keeping Trials in Ice: Project Overview

Station-Keeping Trials in Ice: Ice and Metocean Conditions

Station Keeping Trials in Ice: Ice Load Monitoring System

Verification of Twistlock Simulations for Modular Use in the Arctic

Scale Effect in Freshwater Ice Flexural Strength

The Study on Design and Ice Collision of Icebreaking Tanker

Modelling Results With a New Simulator for Arctic Marine Structures - SAMS

Definition of Efficiency and Safety Criteria for Icebreaker in Ice Management Operations

Numerical Study of a Fishing Vessel Operating in Partially Ice Covered Waters

Ice Pressure Prediction Based on the Probabilistic Method for Ice-Going Vessels in Inland Waterways

Numerical Modeling of Sand Production Potential Estimation and Passive Control Optimization: A Case Study

Analysis of Wellbore Instability in an Offshore Field: A Case Study

Experimental and Numerical Characterization of the Stress-Strain Behavior of Weak Sandstone Formations for Sanding Assessment

An Integrated Numerical and Mineralogical Study of a High Pressure High Temperature Well

Similarity Analysis for Downscaling a Full Size Drill String to a Laboratory Scale Test Drilling Rig

Machine Learning Approaches to Anomaly Detection of Top Drive Torque Causing Drill Pipe Failure

Combining Physics-Based and Data-Driven Models for Estimation of WOB During Ultra-Deep Ocean Drilling

Calculation of Friction Factors and Downhole Weight on Bit Using Analytical Model of Torque and Drag

Multiphase Flow in a Subsea Hilly Terrain

Drilling Data Quality Management: Case Study With a Laboratory Scale Drilling Rig

Carbon Dioxide and Water Mixture in Pipeline Flow Systems

CFD and Experimental Studies of Yield Power-Law Fluids in Turbulent Pipe Flow

Time-Dependent Computational Fluid Dynamics (CFD) Simulations of a Closing Blowout Preventer

PFC-2D Numerical Study of the Influence of Passive Vibration Assisted Rotary Drilling Tool (pVARD) on Drilling Performance Enhancement

Petroleum Exploration Using New Technologies in 3D Seismic Operations in Arctic Environment - North Slope Alaska

CFD Numerical Simulation for Downhole Thruster Performance Evaluation

State of the Art in 3D Seismic Survey Design for Petroleum Exploration in the Arctic Regions

Technical Challenges for Mantle Drilling

High Geostress Advantageous for Arctic Field Developments

Comparison of Oil Recovery and Carbonate Rock’s Properties Alterations by CO2 Miscible Flooding

Consideration of the Human Element in Cementing Operations and Well Integrity

Implementing Human Factors in Oil and Gas Drilling and Completion Operations: Enhancing Culture of Process Safety

Analytical Models to Estimate Temperature Profiles During Drilling and Shut-In in Deepwater Environment

Effect of Human Factor on OCTG Collapse Testing

International Standards Used Locally Worldwide: Adopting ISO Standards for the (Offshore) Oil and Gas Industry As National Standard by 34 European Countries in a Single Process

Autonomous Inflow Control Device Pilot Application for Extra Heavy Oil Field

Application of Fine Water Plugging Technology With Coiled Tubing in High Water Cut Wells

Increasing Performance of Smart Well Systems by Downhole Chemical Injection

Stabilized Water-Cut in Carbonate Naturally-Fractured Reservoirs With Bottom Water With an Implication in Well Spacing Design for Recovery Optimization

Virtual Subsea Flow Metering Technology for Gas Condensate Fields and its Application in Offshore China

The Investigations of Two Analytical Heat Transfer Modelings to Predict the Temperature Profile in the Wellbore

Quantification of Multiple Factors and Interaction Effects on Drilling Fluid Invasion

Investigations on the Mud Pumps Valves Repair Using Hard Metal Depositing by Welding

Smart Communicative Cement: On the Move Towards the Future of Zonal Isolation Monitoring

Numerical Integration of the AUSMV Scheme With a Dynamic Wellbore Temperature Model

Cement Hydration in the Presence of Nano Magnesium Oxides With Controlled Reactivity

Potential Utilization for a Rock-Based Geopolymer in Oil Well Cementing

On Technologies for Shale Barrier Evaluation in the North Sea

Laboratory Set-Up for Determination of Cement Sheath Integrity During Pressure Cycling

Fluid-Fluid Displacement for Primary Cementing in Deviated Washout Sections

Biosurfactant Versus Commercial Surfactant: Study on Effectiveness for Application in EOR

Proposition of Operational Maps As Tools for Evaluating Safety During the Emergency Disconnection of Risers

Surface Facilities for Thermal EOR Projects: Extra Heavy Oil

Experimental Study of Two-Phase Flow in an Oscillating Vertical Pipe

Workflow for Oil Recovery Design by Polymer Flooding

Use of Integrated Production Modeling to Estimate the Influence of Subsea Manifolds in Reservoir Production Management

Experimental Study and Modeling of Heating Effect in Electrical Submersible Pump Operating With Ultra-Heavy Oil

Can Titanium and Copper Oxide Commercial Nanoparticles Be Used for HP/HT Applications? A Comparison With the Very Well Performing Fe3O4 NP

Study of Frictional Forces Between Rotating Pipe and Wellbore in Horizontal Wells: Experimental and Modeling

Modelling of Drilling Fluid Thixotropy

Steady-State Cuttings Transport Simulation in Horizontal Borehole Annulus

Modeling, Simulation and Validation of the Fluid Temperature of a Physical Drilling Simulator for Experimental Planning

Experimental Investigation of Flow Field Past a Spherical Particle Settling in Viscoelastic Fluids Using Particle Image Velocimetry Technique

Dynamic Cuttings Slip Velocity Evaluation in Non-Newtonian Fluids Using a Temperature Dependent Transient Drift-Flux Model for Directional Wells

Experimental and CFD Study of Circulation Efficiency in Simulated Irregular Annulus

Effect of Buoyancy and Inertia on Viscoplastic Fluid: Fluid Displacement in an Inclined Eccentric Annulus With an Irregular Section

A Transient Flow Model for Investigating Parameters Affecting Kick Behavior in OBM for HPHT Wells and Backpressure MPD Systems

PIV Analysis of Dynamic Velocity Profiles in Non-Newtonian Drilling Fluids Exposed to Oscillatory Motion

Using Lightweight or Low Viscosity Preflushes for Primary Cementing of Surface Casing

Tracking Fluid Interface in Carbon Capture and Storage Cement Placement Application

Dynamic Particle Transport in Horizontal Pipes Based on Three-Layer Modeling: Simulation and Experimental Study

Wood Fibre Based Lost Circulation Materials

Mathematical Modeling and Analysis of Riser Gas Unloading Problem

Kick Management Study on Automated Well Control for Managed Pressure Drilling in Long Wells

Cuttings Bed Removal in Deviated Wells

Eco-Friendly Drilling Fluid Deflocculant for Drilling High Temperature Well: A Review

The Application of Fuzzy-Ball Drilling Fluid to Deepwater Drilling to Deal With Highly Mineralized Formation Brines and Low-Temperature Environment

Rheological Properties of Barite Sediments in Water-Based Drilling Fluids

Effect of MWCNT and MWCNT Functionalized -OH and -COOH Nanoparticles in Laboratory Water Based Drilling Fluid

Casing Removal Tests in Laboratory Setup

Laboratory Test on Cement Plug Integrity

Permanent Plug and Abandon of a Subsea Well With Obstructed Well Access: A Success Story

Shale As a Sealing Barrier Around Deep Wells

Volume 5: Pipelines, Risers, and Subsea Systems

Volume 2: CFD and FSI

Volume 7B: Ocean Engineering

Volume 7A: Ocean Engineering

Volume 1: Offshore Technology

Volume 4: Materials Technology

Volume 11A: Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering

Volume 9: Offshore Geotechnics; Honoring Symposium for Professor Bernard Molin on Marine and Offshore Hydrodynamics

Volume 6: Ocean Space Utilization

Volume 11B: Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering

Volume 3: Structures, Safety, and Reliability

Volume 10: Ocean Renewable Energy

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Towards a Novel Type of Ice for Model Tests With Vertically Sided Structures

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Ziemer, Gesa
Copyright Year	2018
Abstract	Model tests in ice are well-established to assess ice loads acting on ship-shaped structures. Model basins worldwide have elaborated different types of model ice over the past decades and gained confidence in e.g. predicting ship’s resistance which is validated by full scale data. Driven by industrial needs, the model ice was invented and modified with emphasis on the failure observed on ship hulls: Mostly flexural failure with only limited influence of crushing, i.e. against a vertical stem contour. Nowadays, the same model ice is occasionally used for structures exposed to ice action which are far from being ship-shaped, such as vertical sided monopiles or artificial islands. This approach is often questioned as the currently used model ice is usually insufficiently brittle, overstates out-of-plane deformation and flexural failure of the ice sheet, and transfers most of the ice load by a hard top layer rather than creating a wedge-shaped ice edge with a line-like contact approximately at middle height of the ice thickness as observed in full scale indentation tests. Therefore, results from tests with vertical structures in model ice have to be treated cautiously and not all observations are directly scalable. In an attempt to overcome the most severe issues with HSVA’s model ice in tests with vertically sided structures, a new way of initiating the formation of a model ice sheet was tested as a part of the IVOS project. Instead of spraying a top layer, the water in the basin was kept in motion by a wave maker while crystals formed. When the waves were stopped, an ice sheet with larger crystals in the top layer grew. A compliant vertical structure was pushed through this ice sheet and global and local loads were measured. The measurements were compared to tests with the same structure in conventional columnar model ice. Various ice properties were measured throughout the tests. This paper introduces an alternative way to create a model ice sheet for tests with vertically sided structures utilizing a wavemaker, and discusses the findings from first model tests.
Sponsorship	Ocean, Offshore and Arctic Engineering Division
File Format	PDF
ISBN	9780791851296
DOI	10.1115/OMAE2018-77850
Volume Number	Volume 8: Polar and Arctic Sciences and Technology; Petroleum Technology
Conference Proceedings	ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering
Language	English
Publisher Date	2018-06-17
Publisher Place	Madrid, Spain
Access Restriction	Subscribed
Subject Keyword	Model basin Water Deformation Crystals Spraying (coating processes) Ice Brittleness Wedges Waves Stress Hull Ships Plasma spraying Failure Artificial islands
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in