NDLI: Numerical Simulation of Transport Phenomena for a Double-Layer Laser Powder Deposition of Single-Crystal Superalloy

Content Provider	Springer Nature Link
Author	Liu, Zhaoyang Qi, Huan
Copyright Year	2014
Abstract	A turbine blade made of single-crystal superalloys has been commonly used in gas turbine and aero engines. As an effective repair technology, laser powder deposition has been implemented to restore the worn turbine blade tips with a near-net shape capability and highly controllable solidified microstructure. Successful blade repair technology for single-crystal alloys requires a continuous epitaxial grain growth in the same direction of the crystalline orientation of the substrate material to the newly deposited layers. This work presents a three-dimensional numerical model to simulate the transport phenomena for a multilayer coaxial laser powder deposition process. Nickel-based single-crystal superalloy Rene N5 powder is deposited on a directional solidified substrate made of nickel-based directional-solidified alloy GTD 111 to verify the simulation results. The effects of processing parameters including laser power, scanning speed, and powder feeding rate on the resultant temperature field, fluid velocity field, molten pool geometric sizes, and the successive layer remelting ratios are studied. Numerical simulation results show that the maximum temperature of molten pool increases over layers due to the reduced heat dissipation capacity of the deposited geometry, which results in an increased molten pool size and fluid flow velocity at the successive deposited layer. The deposited bead geometry agrees well between the simulation and the experimental results. A large part of the first deposition layer, up to 85 pct of bead height, can be remelted during the deposition of the second layer. The increase of scanning speed decreases the ratio of G/V (temperature gradient/solidification velocity), leading to an increased height ratio of the misoriented grain near the top surface of the previous deposited layer. It is shown that the processing parameters used in the simulation and experiment can produce a remelting ratio R larger than the misoriented grain height ratio S, which enables remelting of all the misoriented grains and guarantees a continuous growth of the substrate directional-solidified crystalline orientation during the multilayer deposition of single-crystal alloys.
Starting Page	1903
Ending Page	1915
Page Count	13
File Format	PDF
ISSN	10735623
Journal	Metallurgical and Materials Transactions A
Volume Number	45
Issue Number	4
e-ISSN	15431940
Language	English
Publisher	Springer US
Publisher Date	2014-01-17
Publisher Place	Boston
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Metallic Materials Characterization and Evaluation of Materials Structural Materials Surfaces and Interfaces, Thin Films Nanotechnology
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Metals and Alloys Condensed Matter Physics

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Pulsed Laser Deposition of the Ni-Base Superalloy Films

Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabricated by Laser Powder Deposition

Erratum to: Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabricated by Laser Powder Deposition

Creep and Stress Relaxation Anisotropy of a Single-Crystal Superalloy

Spinodal Decomposition Mechanism of γ′ Precipitation in a Single Crystal Ni-Based Superalloy

Femtosecond laser machining characteristics in a single-crystal superalloy

Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy

Influence of Processing Parameters on the Solidification Behavior of Single-Crystal CMSX-4 Superalloy

On the Mechanical Behavior of a New Single-Crystal Superalloy for Industrial Gas Turbine Applications

Numerical Simulation of Transport Phenomena for a Double-Layer Laser Powder Deposition of Single-Crystal Superalloy

Similar Documents

Pulsed Laser Deposition of the Ni-Base Superalloy Films

Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabricated by Laser Powder Deposition

Erratum to: Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabricated by Laser Powder Deposition

Creep and Stress Relaxation Anisotropy of a Single-Crystal Superalloy

Spinodal Decomposition Mechanism of γ′ Precipitation in a Single Crystal Ni-Based Superalloy

Femtosecond laser machining characteristics in a single-crystal superalloy

Numerical Simulation of Solidification, Homogenization, and Precipitation in an Industrial Ni-Based Superalloy

Influence of Processing Parameters on the Solidification Behavior of Single-Crystal CMSX-4 Superalloy

On the Mechanical Behavior of a New Single-Crystal Superalloy for Industrial Gas Turbine Applications

Numerical Simulation of Transport Phenomena for a Double-Layer Laser Powder Deposition of Single-Crystal Superalloy