NDLI: Preparation and cutting performance of WS2 soft-coated tools

Content Provider	Springer Nature Link
Author	Lian, Yunsong Deng, Jianxin Li, Shipeng Xing, Youqiang Chen, Yangyang
Copyright Year	2012
Abstract	WS2 soft-coated tools were produced by medium-frequency magnetron sputtering, multi-arc ion plating, and ion beam-assisted deposition technique on the cemented carbide YT15 (WC + 15 % TiC + 6 % Co) substrates. The thickness, microhardness, surface morphologies, crystallization, and coating/substrate critical load of the coatings were tested and investigated. Dry turning tests on no. 45 quenched and tempered steel were carried out with the coated tool and uncoated YT15 tool. Cutting forces and cutting temperatures were tested, respectively. The result shows that the cutting force of WS2 soft-coated tool was decreased by 30–35 %, and the cutting temperature was reduced by 10–15 % in comparison with the uncoated YT15 tool. Through cutting force and cutting temperature theoretical analysis, the lower average shear strength of WS2 soft coating at the tool–chip and tool–workpiece interfaces leads to the decrease of cutting force and cutting temperature during cutting process. The advantage in cutting force and cutting temperature is obvious in relatively high-speed and high-temperature conditions may be because of the high temperature resistance and the oxidation resistance of WS2 soft coating which is not sensitive to high cutting temperature and high cutting speed.
Starting Page	1027
Ending Page	1033
Page Count	7
File Format	PDF
ISSN	02683768
Journal	The International Journal of Advanced Manufacturing Technology
Volume Number	67
Issue Number	5-8
e-ISSN	14333015
Language	English
Publisher	Springer London
Publisher Date	2012-10-10
Publisher Place	London
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	WS2 soft-coated tools Medium-frequency magnetron sputtering Cutting performance Wear behavior Dry cutting Industrial and Production Engineering Production/Logistics/Supply Chain Mechanical Engineering Computer-Aided Engineering (CAD, CAE) and Design
Content Type	Text
Resource Type	Article
Subject	Industrial and Manufacturing Engineering Control and Systems Engineering Mechanical Engineering Computer Science Applications Software

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Preparation of tungsten disulfide (WS2) soft-coated nano-textured self-lubricating tool and its cutting performance

Cutting force and tool wear of single diamond-coated bead

Cutting performance and wear mechanisms of Sialon–Si3N4 graded nano-composite ceramic cutting tools

Cutting performance of coated carbide tools in high-speed face milling of AISI H13 hardened steel

Study on cutting forces and experiment of MoS2/Zr-coated cemented carbide tool

Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V

The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting

An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools

A review of cryogenic treatment on cutting tools

Preparation and cutting performance of WS2 soft-coated tools

Similar Documents

Preparation of tungsten disulfide (WS2) soft-coated nano-textured self-lubricating tool and its cutting performance

Cutting force and tool wear of single diamond-coated bead

Cutting performance and wear mechanisms of Sialon–Si3N4 graded nano-composite ceramic cutting tools

Cutting performance of coated carbide tools in high-speed face milling of AISI H13 hardened steel

Study on cutting forces and experiment of MoS2/Zr-coated cemented carbide tool

Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V

The relationship between the cutting speed, tool wear, and chip formation during Ti-5553 dry cutting

An investigation on wear mechanism of high-speed turning of free-cutting steel AISI 1215 using uncoated and multi-layer coated tools

A review of cryogenic treatment on cutting tools

Preparation and cutting performance of WS2 soft-coated tools