NDLI: The realisation of the control of an AC/DC converter using a motor control DSP

Please wait, while we are loading the content...

2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe)

2014 16th European Conference on Power Electronics and Applications

2013 15th European Conference on Power Electronics and Applications (EPE)

Proceedings of the 2011 14th European Conference on Power Electronics and Applications

2009 13th European Conference on Power Electronics and Applications

2007 European Conference on Power Electronics and Applications

2005 European Conference on Power Electronics and Applications

A five-level inverter topology with common-mode voltage elimination for induction motor drives

Applications of power electronics converters for control of specific parameters in high voltage transmission network

A fixed point variable sample rate frequency adaptive bandpass filter for extraction of synchronization information from AC utility network signals

Space vector modulation schemes for a five-phase voltage source inverter

4-13 kA DC current transducers enabling accurate in-situ calibration for a new particle accelerator project, LHC

Control strategies of active filters in the context of power conditioning

The DC-link capacitor current in pulsed single-phase H-bridge inverters

Frequency modulation techniques for EMI reduction in SMPS

Controlling voltage source converters with minimal energy storage

A novel power control method achieving high reliability of auxiliary power supply system for trains

Current measurement dedicated mixed system-on-chip for highly integrated power control

Experimental performance evaluation of six-phase series-connected two-motor drive systems

Hybrid energy storage systems based on compressed air and supercapacitors with maximum efficiency point tracking

Modeling the lift DC-DC converter in the state space discrete time

Calculation and display of influences on field-oriented control of three-phase induction machines with interactive parameter modification using LabVIEW

Five-level inverter having only double DC power supplies

Some measurement techniques of distribution line impedance on hot-line

Universal power losses estimator for low voltage IGCTs switching cells

High power resonant topology for DC-DC converter

Minimising in-rush current at resonant converter start-up

Resonant standby mode for LLCC load resonant power converters

Series connection of insulated gate bipolar transistors (IGBTs)

Dynamic damping with power electronics: industrial cases

Speed and torque control of a permanent magnet excited transverse flux motor for direct servo-drive applications

Bidirectional switches for matrix converter in contactless energy transmission systems

Control of front-end converter with shunt active filter using adaptive gain

Polyphase boost converter for automotive and UPF applications

New field-weakening control considering voltage saturation for vector control system of induction motor

Verification of frequency converter with small DC-link capacitor

Iron loss measurement technique and experience for flux including DC offsets

Experimental investigation of the current synchronized control: application to high voltage/high power DC/DC converters

Application of the matrix converter for the sensorless position control of permanent magnet AC machines using high frequency injection

Power factor correction of three-phase diode rectifiers using optimum ripple currents injection

Electronic stabilization methods for switched reluctance drives in weak supply nets

Novel lumped-parameter thermal model for electrical systems

Integrated inverter/induction machine design based on operating conditions for electrical generation

Stabilization of an induction motor drive with resonant input filter

Current controller with low total harmonic distortion

Reducing cogging torque of interior permanent magnet synchronous motor for electric bicycles

A new sensorless control for switched reluctance motor

Development, test and large production of soft switching high current power converters for particle accelerators

The optimization of high frequency operated transformers for resonant converters

Regenerative braking by electric hybrid vehicles using super capacitor and power splitting generator

VHDL-AMS based design methodology of very large scale integration fully digital controller for intelligent power control

An optimized snubber design for three level inverter systems

Overview of low cost converters for single-phase switched reluctance motors

A novel technique for control of cascaded multilevel inverter for photovoltaic power supplies

Sensorless speed operation of cage induction motor using zero drift feedback integration with MRAS observer

An experimental and training platform for uninterrupted power in isolated locations: wind turbine - electric generator - battery bank (TP-WT-UPS)

Control-Oriented Dynamic Model of Single Magnetic Push-Pull Forward Converter with Built-in Input Filter

High frequency 3 MHz offline SMPS for audio applications

Real time simulation of matrix converter drives

PWM control of direct frequency converter in AC electric drive

Design of a predictive current controller for a separated starter-generator application

Test-bench for ultra high-speed electrical drives

Scalable fluorescent lamp driver using magnetic amplifiers

Influence of power electronics on design of switched reluctance machines

A new family of modular IGBT converters for traction applications

Multicommutation of IGBTs in large inverters

A new current sensorless MPPT control method for PV generation systems

Active filtering applied to a doubly-fed induction generator supplying nonlinear loads on isolated grid

A hybrid multi-converter system combining single-phase converters with three-phase converter

Self-excited hybrid-field synchronous motors - new dynamic mathematical model and new dynamic vector simulators

Measuring method for determining the reasons of magnetically caused structure-borne sound on electrical drive systems

Comparison of series hybrid active power filters based on experimental tests

Active power filter for harmonic distortion compensation of induction motors with soft starting

Convergence test of model reference parameter adaptive SRM drives

Resonance phenomena and propagation of frequency converter harmonics the catenary of railways with single-phase A.C

Converter control and stability of the 110-kV railway grid increasing use of the static frequency converters

Current control for the switched reluctance motor with enhanced performance

Real-time PMSM rotor position estimator based on virtual HF injection method (VHFIM)

High accurate position control of a hybrid driven circuit breaker

Active three-phase rectifier for aircraft equipment

Combined electrical and thermal modeling in power supplies

Teaching systems engineering: a multidisciplinary project based feedback on a pedagogic experiment: "EasyKawa 2004" Project

Excitation control of a synchronous generator using fuzzy logic stabilizing controller

Numerical coupled analysis of DC motors including saturation and commutation effects

A fully integrated 30 kW motor drive using matrix converter technology

Design optimization of interior permanent magnet (IPM) motors with maximized torque output in the entire speed range

A new application of the coupled-inductors SEPIC converter to obtain I-V and P-V curves of photovoltaic modules

Paralleling of low-voltage MOSFETs operating in avalanche conditions

A non-resonantly coupled parallel resonant converter for stand-alone applications

An auxiliary power supply based on the phase voltage ripple employed in a micro inverter for feeding three phase Tesla induction motor

Prony's method versus FFT for analyzing power converters signals

Steady-state time-domain simulation of power converters using a differentiation matrix

Isolation amplifier for high voltage measurement using a resonant control loop

Medium voltage converter for permanent magnet wind power generators up to 5 MW

Effect of the high input capacitance of 1200 V trench IGBT on the switching characteristics under inductive load

Stabilized series compensation of induction machines in motor operation fed by voltage source inverter

ESD laboratory for power electronics students

A first loss evaluation using a vertical SiC-JFET and a conventional Si-IGBT in the bidirectional matrix converter switch topology

Three-phase sigma-delta modulation using zero-sequence components

Implementation of a digital filter for speed noise reduction in drives with electromagnetic resolver

A new voltage sag compensator with a gradationally controlled voltage inverter

Digital control methods for current sharing of interleaved synchronous buck converter

Converter used as a battery charger and a motor speed controller in an industrial truck

Dynamic emulation of mechanical loads - approach based on nonlinear control

Characteristic measurement system for automotive class switched reluctance machines

A universal analytic model for planar coils with circular windings close to conductive-permeable foils

Compensating the line current harmonics with three-switch current-source PWM rectifier

Power system emulation using a real time, 145 kW, virtual power system

The serial resonant converter with controlled rectifier stage

Periodic and traveling current-density distributions in high-voltage diodes caused by avalanche injection

Robust speed controller for PMSM based on artificial neural network

A 250 W high pressure sodium lamp high power factor electronic ballast using an ac chopper

Experimental and numerical investigations of 13-kV diodes and asymmetric light-triggered thyristors

Selection of parameters for balancing circuit of DC-DC and AC-AC multicell converters

Analysis of non-idealities in direct and indirect matrix converters

Eddy current losses in SMPS transformers round wire windings: a semi-analytical closed-form formula

Irradiance equalization method for output power optimization in plant oriented grid-connected PV generators

High-voltage high-frequency Marx-bank type pulse generator using integrated power semiconductor half-bridges

Controlled active- and reactive-power flow using a DIPFC

Integral design of a high power density DC/DC converter for harsh environments

Analysis of premature breakdown in high-power devices using IBIC microscopy

A robust method for flux weakening operation of DTC induction motor drive with on-line estimation of the break-down torque

Power error vector control for doubly-fed induction machine

Concept of 50 kW DC/DC converter based on ZVS, quasi-ZCS topology and integrated thermal and electromagnetic design

Active gate driver for dv/dt control and active voltage clamping in an IGBT stack

Design of a soft-switched three-port converter with DSP control for power flow management in hybrid fuel cell systems

Speed sensorless control of PM synchronous machine using direct current control

A simple DTC-SVM method for matrix converter drives using a deadbeat scheme

Comparison of simulation and measurement of thermal resistance of surface mounted power packages for high power density ballasts

EMC of an induction motor: measurements compared to calculations

The use of pitch factor in calculations of AC-machines with concentrated windings

Control of a doubly-fed induction wind generator under unbalanced grid voltage conditions

The minimization of copper losses in core-less inductors: application to foil- and PCB-based planar windings

Rotor flux and speed estimators for induction motor drives. A performance evaluation

Online diagnostics and condition monitoring in voltage source inverters

Energy efficient drive system for a diesel electric shunting locomotive

Project oriented education: Build your own electric go-kart

Using a CLC low-pass filter to reduce the consequences of aging in steady-state regime of DC-DC converters

Mains harmonic reduction circuits using non linear inductances

300/spl deg/C operating junction temperature inverter leg investigations

Multi-level converter power unit

Intelligent measurement and control platform using Spartan3 FPGA

Fast over-current protection of high power IGBT modules

Quantitative analysis of the external radial magnetic field for detection of stator inter-turn short-circuit in induction machines

Fast waveform and EMI calculation of a PFC converter

Simulation of the magnetic and dynamical characteristics of micro linear motors

Five years of operational experience with digitally controlled power supplies for beam control at the Paul Scherrer Institut (PSI)

Impacts of cross-saturation on sensorless control of surface permanent magnet synchronous motors

Self-oscillating sine wave oscillator for ferrite loss measurements

A 20 kHz high speed hexfet FQS direct AC-AC chopper: operating and improvement of EMC conducted modes

A 200 kVA prototype of kinetic energy storage system based on switched reluctance machine technology

Direct model predictive control - a new direct predictive control strategy for electrical drives

A three-level voltage source inverter controlled by means of a hysteresis-band current strategy, driving a synchronous machine

Comparison of low frequency hysteresis current control power inverters with accurate selection of applied vectors - two and three level comparators

An active filter for eliminating harmonics and interharmonics in the input current to an AC voltage controller for refrigeration and air-conditioning applications

Reduction of vibrations in an induction machine supplied by high power PWM inverter

Inductors combining ring cores and I cores

Doubly fed induction generator with active filtering function for wind energy conversion system

Application of packet control method for a high power high voltage flyback converter to reduce noise influence

Analysis of the possibility to use 1200 V IGBT devices in snubberless medium power motor converters supplied from the 600 V mains

Improvement of position-sensing characteristics in self-sensing active magnetic bearings

A self-sensing active magnetic bearing with zero-bias-current control

Sensor fault detection for fault tolerant vector controlled induction machine

A double step-down two-phase buck converter for VRM

Method for measuring torques of induction motors for the slip ranging from 0 to 2 by detecting twists of stator

Implementation of deadbeat control for single phase utility interactive inverter using FPGA based hardware controller

Combining exact linearization and model reference techniques for design of adaptive global asymptotic stabilizer and application to adaptive control of induction motor

FPGA based multi-sampling pulse compensation method with deadbeat control for single phase PWM inverter

Development of economical UPS system having active filter across DC-bus

Simulation and control of electrical ship network

Transformer used as a DC link filter inductance in DC high power traction applications

Doubly-fed induction machine as generator in wind power plant: nonlinear control algorithms with direct decoupling

Dynamic reconfiguration of direct torque and stator flux control by means of sliding mode theory

Transformerless voltage clamp circuit applied to a soft switched DC/AC current source inverter

New concepts for distributed power generation and power quality for large scale integration of renewable energy sources

Advanced control principles of voltage source inverters for use in power distribution or/and harmonics compensation

Grid connection of active stall wind farms using a VSC based DC transmission system

Single-phase serial AC voltage controller based on bipolar PWM AC matrix-reactance chopper

Optimized selection of switching algorithm in space vector modulated neutral point clamped converters

Unity power factor control method of single-phase to three-phase power converter without reactor and electrolytic capacitor

Advanced high frequency transformer linked soft switching PWM DC-DC power converter with utility AC dual voltage modes for low voltage and large current applications

Finite element analysis of a novel centrifugal induction blood pump

Hot-melt adhesive method using metal foil induction heating and performance of long E-type core head

Advanced anti-slip and anti-skid re-adhesion control considering air brake for electric train

Novel space vector based hysteresis current control (HCC) strategies for matrix converter

A novel technique for photovoltaic maximum power point tracking system

Non-punch-through insulated gate bipolar transistors under high temperature gate bias and high temperature reverse bias stresses-hard-switching performances evolution

Hidden reflection phenomena on inverter-fed induction motors

Joint use of mono-phase and three-phase inverters for improvement of characteristics of multilevel frequency converters

High voltage igniter based on discontinuous working mode of piezoelectric transformers

Voltage source converters for maintaining of power quality and stability in power distribution

Fuzzy state feedback controller tuning for DC/DC converter

Detailed study of the rotor asymmetry effects of induction machine under different supply conditions

A new robust power MOSFET family in the voltage range 80 V-150 V with superior low R/sub Dson/, excellent switching properties and improved body diode

Design of current control of fully integrated surface-mounted permanent magnet synchronous motor drive servo actuators

The experimental coaxial transformer - technology and characteristics

Diesel-generator-units dynamic analysis during the start-up of induction motors drives

Super cooling structures for power electronics

Parameter estimation for traction drive-trains

Measurement and analysis of line interference currents generated by an IGBT four quadrant converter

Speed sensorless vector control for rolling stock

Zero ripple DC-DC converter

A current compensation circuit for VRM in the sudden change of the load

A modified modulation control of a single-phase inverter with enhanced power decoupling for a photovoltaic AC module

Characteristic of a vector controlled induction motor drives with electrical double layer capacitor

UPS SMES using dry type superconducting coil designed to protect from momentary voltage drop

Coordinate control of distributed generations with power converters in a micro grid

A method to analyze the current ripple distribution in multi-drive systems

Comparison of university level study methods and laboratory equipment for teaching of electrical drives

Supply power quality of a micro grid based on distributed generations in relation with power converter control

FPGA based dead-time compensation for PWM inverters

A novel control strategy for high-frequency AC-link AC/AC direct converter based on virtual converter system

Single chip implementation of the frequency converter controller using FPGA circuit and soft processor

A half-bridge series resonant inverter for induction cookers using a novel FPGA-based control strategy

A novel control method of boost and buck-boost converters with a hysteretic PWM controller

Combined power supply method for micro grid by use of several types of distributed power generation systems

Independent vector control of two PM motors with five-leg inverter by the expanded two-arm modulation method

Monitoring system for the diagnostic of sparking in doubly-fed induction generators

Broken rotor bar fault detection in induction motors using starting current analysis

Analytical investigation of rotor slot harmonics in a three phase induction motor with broken rotor bars

Analysis of the dynamic characteristics of a power semiconductor module, considering the influence of electromagnetic coupling between wiring

Stability of voltage and frequency control in distributed generation based on parallel-connected converters feeding constant power loads

Vehicle drivetrain customization: application to a postal service fleet

Active- and reactive-power control for a wind generator connected to the grid using a predictive-integral control and a PI control schemes

Lateral running control for air-suspended hybrid linear motor vehicle

Development of a high bandwidth multi-phase multilevel power supply for electricity supply network emulation

Energy storage on board of railway vehicles

Filtering techniques for matrix converters to achieve environmentally harmonious drives

Remote system for the study of DC-DC converters

Load invariant buck converter - analysis and implementation

Low power converters for high output voltages

Sensorless instantaneous power control of induction machines

Network friendly low-switching frequency high-power three-level PWM rectifier

Induction heating using traveling magnetic field and three-phase high-frequency inverter

Modelling of asymmetrical pulse width modulation with frequency tracking control using phasor transformation for half-bridge series resonant induction cookers

Four-quadrant flyback converter for direct audio power amplification

On DC injection to AC grids from distributed generation

AC-side current waveform improvement of single-phase rectifiers using a triple-frequency PWM scheme

A comparison of the reliability of a matrix converter and a controlled rectifier-inverter

Sensorless direct instantaneous torque control for switched reluctance machines

Grid connected inverter suitable for economic residential fuel cell operation

Simulation of switched-mode power supplies (SMPS) through an accurate non-quasi-static SPICE power diode model

Performance of diagnosis methods for IGBT open circuit faults in three phase voltage source inverters for AC variable speed drives

Managing power semiconductor obsolescence by press-pack IGBT substitution

(De-)stabilising effect of power electronic interfaced DG units in distribution networks

A double resonance generator simulation using a hybrid approach

Multi-machine modelling of two series connected 5-phase synchronous machines: effect of harmonics on control

A novel iron loss calculation method on power converters based on dynamic minor loop

Training platform for teaching power electronics Using PIC microcontrollers

Driving stability for electric vehicle with independently driven two wheels in case of inverter failure

Analysis of a 300 MW variable speed drive for pump-storage plant applications

New solutions to the old problems of buck and boost converters

The new construction of the low voltage electric machine for automotive industry

Control of zero-sequence current in parallel connected voltage source PWM rectifiers using converter-flux-based control

Pulse operation of HPS lamp in high-frequency modulation

Modelling, Simulations and Experimental Tests of an Induction Machine with Rotor Asymmetries

Modelling and control of four-wire voltage source inverter under unbalanced voltage condition for hybrid power system applications

Cost effective solutions to increase the immunity of AC drives against voltage dips

Feedback linearization control with average current sharing for multiphase synchronous buck converter

A simple, digital current control design for grid-connected inverters

Theoretical output current spectra of three phase current source converters

Three-phase active power filter using the sliding DFT control algorithm

Decentralized control for parallel operation of distributed generation inverters using resistive output impedance

Analytical evaluation of the total harmonic current in three phase voltage and current source converters

Space vector modulation strategy for conventional and indirect matrix converters

Integrated current sensing for power electronic modules using GMR field detectors

Small-scale test bench of a hybrid power system

A versatile zero-speed sensorless position detection technique for PMSMs

Switching cell optimisation minimising the common mode current for the power factor corrector

Three-dimensional space vector modulation for a four-leg three-level inverter

Optimal design considerations for a linear actuator with active magnetic suspension

Stability analysis of a compensated load on a grid to obtain unity power factor

New zero-voltage switching HF link single-phase UPS system with input PFC

Mathematical modelling and digital control for power supplies of current pulsed for welding machine

Comparison of three phase current source inverters and voltage source inverters linked with DC to DC boost converters for fuel cell generation systems

Thermal design of converters using discrete power components incorporating an IGBT and a freewheeling diode

The ARCP flying capacitor inverter

Modeling and analysis of PM brushed DC motor using FEM

A novel ZVT-ZCT PWM DC-DC converter

A 3-phase 12/10 asymmetrical switched reluctance motor

A novel sliding mode observer applied to the three-phase voltage source inverter

PWM-synchronised flux position estimator for sensorless motor drive with IM based on FPGA

Sinusoidal waveform compensator for optimal digital control of three-phase PWM inverter

Addressing the topologies, converters, and switching devices for intermediate bus architectures

Multi-level medium voltage inverters for reactive power and harmonic compensation

Design considerations for sensorless control of PMSM drive based on extended Kalman filter

Development of power quality controller connected in parallel to dispersed generations

High efficiency SVC system using open-winding transformer and two space vector modulated inverters

Grid connected or stand-alone real-time variable speed wind generator emulator associated to a flywheel energy storage system

Evaluation of a hybrid sensorless position observer for brushless DC motors

A comparison of basic properties of single-phase serial AC voltage controllers using bipolar PWM chopper

New opportunities in DC/DC conversion with recent developments MOSFET technologies

A simple, low cost gate drive method for practical use of SiC JFETs in SMPS

Using a simple analogical identification method and PID controllers for unified power quality conditioning

New facilities for teaching and research with decentralized electric drive systems

Using optimized transient excitation technique to stabilize model-based sensorless control of induction machine

Transient analysis of permanent magnet linear synchronous motors

Electronic power management for bicycles

Feedback loop control strategies with a resonant controller for AC voltage control of a grid-connected decentralized generator

A linear parameter variant H/sub /spl infin// controller design for a permanent magnet synchronous machine

Optimum use of DC bus by fitting the back-electromotive force of a 7-phase permanent magnet synchronous machine

High Dynamic Control a PWM Rectifier under Unbalanced Voltage Supply with Deadbeat Current Controllers

Efficiency comparison of voltage source and current source drive system for medium voltage applications

An investigation of a reliable behavioral IGBT model in comparison to PSpice and measurement in hard- and soft switching applications

A neuro-fuzzy multilayer weights approach for an on-line learning speed controller applied to a switched reluctance machine: why and how to use it

Generation of high-frequency common mode currents in machines of inverter-based drive systems

Harmonic calculation software for industrial applications with adjustable speed drives

Novel high power IGBT inverter for a power conditioning system

Sensorless control of PM synchronous motors and brushless DC motors - an overview and evaluation

Analysis of thyristor switch in power conditioning system with SMES

PCB embedded DC/DC 42 V/14 V converter for automotive applications

Optimal control structure to reduce the cumulative load in the drive train of wind energy converters

Diode recovery characteristics considerations for optimizing EMI performance of continuous mode PFC converters

Stator faults diagnosis in induction machines under fixed speed

Straight forward control of the matrix converter

Simple direct capacitor voltage balancing of a flying capacitor converter

A new educational set-up for a power engineering laboratory

Control of single-stage single-phase PV inverter

Comparison of single and two stage topologies for interface of BESS or fuel cell system using the ABB standard power electronics building blocks

Adding damping in power distribution systems by means of power electronic converters

The diamond for power electronic devices

Application of a unsymmetrical PWM technique in harmonic compensators

Optimal control of static VAr compensators in power supply systems with electrical arc furnaces

Development of a 25 kV 1 Amp direct conversion power supply for high power RF applications

A single switch buck-boost converter with a high conversion ratio

A novel technique to estimate rotor time constant in vector controlled induction motor drives

Optimisation of primary transistors in flyback converters with high input voltage

Comparison of SMES and ScES based power conditioning systems

Local compensation of wind energy conversion system

High frequency power converter for PEFC generator architecture based on a multi stacks association for transportation applications

Rotor flux oriented control of a high speed induction motor drive applying a two-level voltage source converter with LC-sine filter

Design and comparison direct torque control techniques for induction motors

Near-time-optimal position control of an actuator with PMSM

EN55015 compliant 500 W dimmer with low-losses symmetrical switches

Initial rotor position estimation of half-wave rectified brushless synchronous motor

Predictive control strategies for ZCS direct converter HV power supply

Power converter's optimisation and design. Discrete cost function with genetic based algorithms

Crowbar control algorithms for doubly fed induction generator during voltage dips

Non-linear dynamic modelling of vector controlled PM synchronous machines

Double-sided low-temperature joining technique for power cycling capability at high temperature

A new flux weakening operation of interior permanent magnet synchronous motors for railway vehicle traction

Dynamic performance of sensorless induction motor drives with two control systems based on multiscalar models

PWM current source inverter with IGBT transistors and multiscalar model control system

New generation of compact low voltage IGBT converter for traction applications

Novel multi resonant ZVS high frequency power converter with high efficiency power conversion

Experimental verification of the thermal droop load sharing technique

Experimental validation of multilevel converters for variable speed wind turbines

A new implementation of high voltage, high frequency direct power converter

A 20 KW matrix converter drive system for an electro-mechanical aircraft (EMA) actuator

Dynamic torque control for switched reluctances drives based on a new online machine model

HV driver for ion thrusters

Actions to increase the cogging torque and effects of the increased cogging torque to permanent magnet DC motors

Stability analysis of a BDFM under open-loop voltage control

Zero-crossing distortion in grid-coupled AC-DC converters

Evaluation of stationary frame and fixed switching frequency digital current control techniques for power active filters

Multi-resonant state feedback current control structure with pole placement approach

The influence of power electronic dynamics on PEM fuel cell-system

Minimizing power pulsations in a free piston energy converter

Application of SiC-JFETs in current source inverter topologies

Efficient predictive current control technique for multilevel voltage source inverters

New direct torque control scheme for induction motors

Phase control of resonant power supply inverters

Buck-boost integrated forward converter

Simple control autotuning for PMSM drives based on feedback relay

Experimental study of instabilities in two parallel-connected boost converters under current mode control

Design and control of a current source flyback inverter for decentralized grid-connected photovoltaic systems

Design of a PFC AC/DC flyback converter for low voltage applications

Study of multi-pulse PWM for multi-level BTB for distributed generation system

Practical implementation of the sensorless field oriented control of a PMSM for wide speed range

Inverter DC-link stabilizing control with improved voltage sag ride-through capability

Fuel cell inverter system with integrated auxiliary supply

Evaluation of induction motor speed sensorless control for railway vehicle traction system

AC drive without speed sensor

Linear closed-loop control of active power filter

An indirect matrix converter with a cost effective protection and control

A novel multi-pole permanent magnet synchronous machine with SMC bypass core for magnet flux and SMC field-pole core with toroidal coil for independent field strengthening/weakening

Improvement of output voltage capability of a two stage direct power converter under unbalanced input voltages

Post-fault performance of a fault-tolerant switched reluctance motor drive

An efficient energy controller for an induction motor drive with compensation of temperature using neural networks

Power electronics laboratory combined with digital regulators

Emergency braking for free piston energy converters

Influence of ROV umbilical on power quality when supplying electrical loads

Fuzzy modeling of disturbance torques/forces in rotational/linear interior permanent magnet synchronous motors

Additional losses in high-speed induction machine - removed rotor test

Electromagnetic analysis of the induction motor with spiral sheet rotor

Flux sliding mode control of a doubly fed induction machine

On-line simplex-genetic algorithm for self-commissioning of electric drives

Control and minimization of torque ripple in switched reluctance generator

Multipole doubly-fed high-torque motor

Resonant boost converter operating above its resonant frequency

Frequency- and time-domain homogenization of windings in two-dimensional finite-element models

Control structures for multi-machine multi-converter systems with several couplings by criteria merging

3D torques, translational forces and induced voltage determination in an ironless biomedical actuator

EKF-based output-voltage regulation of 3/sup rd/-order LCC resonant converters subject to load variations

Digital control of dual-load LCLC resonant converters

Rapid design of LCC current-output resonant converters with reduced electrical stresses

Electrical characterizations and evaluation of thermo-mechanical stresses of a power module dedicated to high temperature applications

New control strategy and its DSP implementation for a naturally commutated matrix converter in a variable speed constant frequency generating system

Dynamic performance of buck converter with input voltage feedforward control

Analysis and control aspects of harmonic distortion in the front-end three-phase four-wire PWM boost rectifier

Design of a permanent magnet synchronous motor integrated in the wheel rim on wheelchairs

Control of a piezoelectric actuator for adjustable brake in haptic devices

The parallel combination of a valve regulated lead acid cell and supercapacitor for use as a hybrid vehicle peak power buffer

Real-time HIL simulation of a complete PMSM drive at 10 /spl mu/s time step

Switching ruggedness of high-power diodes

Active front end adjustable speed drives under grid voltage sags: effects and dynamical performance evaluation

Improving efficiency in switched reluctance motor drives with online control of turn-on and turn-off angles

AC switches with integrated gate driver supplies

A new space vector modulation scheme for three phase four wire inverter for standalone photovoltaic systems

Design, analysis and comparison of multilevel topologies for DSTATCOM applications

High frequency power switch - improved performance by MOSFETs and IGBTs connected in parallel

High frequency effects in current measurement using Rogowski coils

Elimination of high power delivery rates by energy storage in supercapacitors

Five level neutral-point clamped inverter for a dynamic voltage restorer

A fast power loss calculation method for long real time thermal simulation of IGBT modules for a three-phase inverter system

A transformer comparison for three-phase single active bridges

Calculation of a three phase fault in a network with a power electronic based fault current limiter (FCL)

State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers

Sensorless control of deep-sea ROVs PMSMs excited by matrix converters

Parameter estimation methods at three-phase induction machines

Power balancing of a multilevel converter with two insulated supplies for three-phase six-wire loads

Optimized size design of integrated magnetic components using area product approach

New assessing criteria for the contribution of nonlinear loads to the supply voltage harmonic distortion

Implementation issues for fast initial position and magnet polarity identification of PM synchronous machines with near zero saliency

Field stop IGBTs with dynamic clamping capability - a new degree of freedom for future inverter designs?

Different energetic descriptions for electromechanical systems

Modern technologies for experimental education in industrial electronics and electric drives

Minimization of the source current distortion in systems with single-phase active power filters and additional passive filter designed by genetic algorithms

Reduced-order electrical model extensions for induction machine temperature monitoring with extended Kalman filter

Impedance calculation of integrated magnetic components in a wide frequency range

A high frequency resonant power converter for high power RF applications

Artificial neural network control and energy management in 42 V DC link

Gate driver with efficient energy recovery for a 3 MHz resonant converter

Properties, simulation and experimental investigation of the series-parallel active power filters

Power management of an embedded fuel cell - supercapacitor APU

Voltage power line conditioner - voltage restoring mode

Reliability analysis of safety systems using Markov-chain modelling

Development of the educational database on three-phase power factor correctors

Discrete optimal control with fixed end-point for an electrical servo-drive system

Analysis of an optimised single-phase UPS inverter based on a six-pack transistor module

Capacitive energy storage device to cover voltage-drops in transportation vehicles

High speed complementary drive of a hybrid MOSFET and IGBT power switch

The active power filter operation under the distorted supply voltage

Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems

Comparison of the modified subsynchronous cascade drive

Analytical modelling and experimental validation of the dynamic behaviour of permanent magnet synchronous machine based wind energy converter

Axial flux PM synchronous generator design optimization: robustness test of the genetic algorithm approach

Novel AFD method with pulsation of chopping fraction for islanding prevention of grid-connected photovoltaic inverter

Case study of a highly-reliable dimmable road lighting system with intelligent remote control

Analytical modelling dedicated to integrated planar passive components

Investigating stability of a single inductor current mode controlled dual switching DC-DC converter

A novel simulation method for coupled electromagnetic field and circuit problems applied to highly dynamic drive systems

Hybrid simulator of Cheju-Haenam HVDC system and its dynamic performance study

Variable speed integrated generator VSIG as a modern controlled and decoupled generation system of electrical power

Algorithm for the virtual vectors modulation in three-level inverters with a voltage-balance control loop

Direct torque control for stacked multicell (SMC) VSI fed induction machine

Accurate behavioural modelling of power MOSFETs based on device measurements and FE-simulations

Driving optimization of IGBT devices for traction applications

A single-stage single-switch flyback converter with synchronous rectifier

Development of a maximum power tracking unit integrated in wind turbine simulator

High frequency model of a shielded 4-wire energy cable

Sensorless control for PMSM with reduced order torque observer associated to Kalman filter

Design consideration for high output power density (OPD) converter based on power-loss limit analysis method

Low input current ripple converters for fuel cell power units

Electrical energy source with variable speed diesel engine, controlled by using the neural voltage regulator

A trench IGBT distributed model with thermo-sensible parameters

State-space control structures for buck converters with/without input filter

Flicker mitigation with the Smarttrafo

Multiple medium voltage AC drives fed from a common AC bus for single or multi motor conveyor applications

Sensorless direct voltage control method for stand-alone slip-ring induction generator

A fuzzy-PWM direct torque control of induction machines for current limitation and reduced torque ripple

A PID autotuning method for digitally controlled DC-DC boost converters

A mixed-signal control for VRM applications

Investigations of parallel connected IGBT's using electromagnetic field analysis

Polyphased modular direct-drive wind turbine generator

Control techniques for DC-link voltage ripples minimization in cascaded multilevel converter structures

Fabrication of an integrated spiral-type inductor dedicated to DC-DC microconverters

Zero-voltage and zero-current soft-switching PWM inverter

A comparison of sensorless speed estimation for a doubly fed induction machine

A switched reluctance machine for high-torque low-speed applications

Control of permanent magnet synchronous motor with dual-mode position estimation

New e-learning tools for DC-DC converters

High frequency generator for an inductive shrinking unit

Optimization of large scale power electronic structures for comfort electronics in passenger vehicles

Permanent magnet synchronous generators for regenerative energy conversion - a survey

High power medium voltage drives - innovations, portfolio, trends

Input active filter for the DC/DC converter supplied from the traction trolley net

Adaptive control schemes for stabilizing switching frequency of sliding mode controlled power converters

Design of PWM based sliding mode voltage controller for DC-DC converters operating in continuous conduction mode

Reliability analysis of a fuel cell electric city car

Using integral reconstructor for nonlinear-controlled boost converter

Unity power factor PWM rectifier reducing the number of sensors

Flatness based control of three-phase boost rectifiers

High frequency modeling of DC/AC converters

DTC drive with ANN-based stator flux estimator

Dynamic behaviour of PI controlled class-E resonant converter for step-down applications using piezoelectric transformers

High performance control of permanent magnet synchronous motor based on magnetic energy model by sliding mode control

A laboratory test bed for PM brushless motor control

Analysis of a series resonant inverter

High-temperature integration of silicon carbide (SiC) and silicon-on-insulator (SOI) electronics in multichip power modules (MCPMs)

Novel estimator of distorted and unbalanced electromotive force of the grid for control system of PWM rectifier with active filtering

Bearing currents in doubly-fed induction generators

New extra fast soft recovery diodes and their applications

Advanced DBC (direct bonded copper) substrates for high power and high voltage electronics

Stable control method of source current detection type active filter by voltage harmonics feedback

Parameters of the magnetic core and parasitic structure in RF SMPS circuit

Cage induction generators for wind turbines with power electronics converters in the light of the new grid codes

Modified natural commutated switching technique for HF link inverter

Fast recovery diode with local lifetime control using high-energy platinum and helium implantation

Analysis of standard and non-standard control modes for modular converters with synchronous modulation

Circuit oriented average modeling of switching power converters

A modern low loss, high turn-off capability GCT gate drive concept

Post-fault operation of fault-tolerant inverters for PMSM drives

Series connection of high power IGBT modules for traction applications

SiC power bipolar junction transistors - modeling and improvement of the current gain

Comparison of power semiconductor utilization, losses and harmonic spectra of state-of-the-art 4.16 kV multi-level voltage source converters

Technological realization of low on-resistance FLYMOS/spl trade/ transistors dedicated to automotive applications

High-performance motion control of linear motor drives

Experimental determination of lifetime engineering effects on free-carrier concentration

Assessment of electrothermal model of supercapacitors for railway applications

First results from an electro-magnetic (EM) drive high acceleration of a circuit breaker contact for a hybrid switch

Stacked multicell converter (SMC): estimation of flying capacitor voltages

Investigation of the harmonic response of a photovoltaic system with a solar emulator

Variable inductor for voltage control in distribution networks

Dynamic-performance comparison of IRFO and SFO-SM controlled drives in field-weakening region using variable-saturation regulators

Wireless technologies in condition monitoring and remote diagnostics of electric drives; requirements and applications

Estimation of the data transfer requirements of vibration and temperature measurements in induction motor condition monitoring

Thermal design of integrated motor drives for traction applications

Technologies for increased energy efficiency in railway systems

Active-neutral-point-clamped (ANPC) multilevel converter technology

A combined two-method MPPT control scheme for grid-connected photovoltaic systems

Modelling for the sizing of an electrical drive with a voltage inverter and an induction machine

Analysis of partially controllable multi-level voltage source converters

Modelling and design of shunt active power filters using genetic algorithms

A generic converter for experimentation based power electronics learning

A new silicon resistor technology for very high power snubbers

All-digital resolver-to-digital conversion

Modular converter for fuel cell systems with buffer storage

Comparison of fault ride-through strategies for wind turbines with DFIM generators

A hardware tool for explained power electronics control of induction motors

Acceleration sensors in high-bandwidth servo control

Experiences on voltage dip ride through factory testing of synchronous and doubly fed generator drives

Modelling of the power electronic converters using functional models of power semiconductor devices in PSpice

A novel control strategy applied to the series loaded resonant converter

Very high power PEBB technology

Demonstration of wearable power generator

Bipolar 6.5 kV-SiC-diodes: on the road to industrial application

Latch-up free 600 V SOI gate driver IC for medium power and high temperature applications

EMI analysis in high power converters for traction application

Two degree of freedom resonant structure for robust current control and active power filtering

Technological study of an IGBT module for an aeronautical application in zone engine

Silicon carbide power devices - current developments and potential applications

Real-time fault detection and localization vector-controlled induction motor drives

Sliding mode control of DVR with minimized energy injection

An avalanche rugged NPT trench IGBT used in single-ended quasi resonant topology for induction heating appliance

Voltage dips compensation by wind farm(s) equipped with power converters as decoupling element

Method of the poles position identification for brushless axial flux permanent magnet motor drive system

Sensorless permanent magnet AC motor drive with near zero-speed operation for electric-assisted bicycle

A comparative study on effective signal processing tools for power quality monitoring

A simulation method for analyzing saliencies with respect to enhanced INFORM-capability for sensorless control of PM motors in the low speed range including standstill

Planar busbar optimization regarding current sharing and stray inductance minimization

50 kJ ultra-compact pulsed power supply unit for various applications

Are nonlinear controllers really necessary in power electronics devices?

20 MW DC thyristor converter system with extremely low ripple and drift for high magnetic field research

Sensorless control of salient pole PMSM using a low-frequency signal injection

The realisation of the control of an AC/DC converter using a motor control DSP

Online winding temperature monitoring of PWM inverter-fed induction machines

A study of insulation failure in a high voltage current transformer

Feeder's load balancing using an expert system

Load current estimation for control algorithms in buck converter

Psychoacoustic quantities and their relevance for sound-quality optimization of switched reluctance machines

High-power converter systems for high-speed generators

Current limiter device for railway and distribution network design and tests on railway conditions : 1000 A - 25 kV - 50 Hz

Towards a roadmap for power electronics system integration

System integration in automotive power systems

Implementation of an advanced power electronics signals measurement system at 18 MVA converter

ESBT/spl reg/ in industrial PFC topologies

Power converters for particle accelerators

Advances in power switch technology for 40 V - 300 V applications

Gyrotron body power supply, validation of design with test results

A novel architecture for fast and EMC compliant power MOSFET drivers in automotive applications

Thermal aspects of field weakening implementation for robotics applications

Improved passive filter configurations for high-frequency conducted EMI in power electronics

The state-of-the-art of active filters for power conditioning

High temperature electronic for future hybrid powertrain application

Seamless integration of renewable energies into the electrical supply system

High frequency resonant converter useable for multiple output applications

Integration of power devices-next tasks

An assessment of modern IGBT and anti-parallel diode behaviour in hard-switching applications

SiC market forecasts

Advancement of hybrid vehicle technology

Electrified power train - challenges and opportunities for the electrical industry

Modelling and simulation of a doubly fed induction generator in stand alone variable speed hydro turbine

Jerk-free drives demand for new design considerations

Simplified linear-quadratic regulator applied to a three-level converter

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in