NDLI: Effects of Line Energy on Mechanical Properties, Corrosion and Shape Memory Behavior of Laser-Welded NiTinol Joints

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

ASME 2006 International Manufacturing Science and Engineering Conference(MSEC2006)

ASME 2007 International Manufacturing Science and Engineering Conference(MSEC2007)

ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing(MSEC2008)

ASME 2009 International Manufacturing Science and Engineering Conference(MSEC2009)

ASME 2010 International Manufacturing Science and Engineering Conference(MSEC2010)

ASME 2011 International Manufacturing Science and Engineering Conference(MSEC2011)

ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing(MSEC2012)

ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference(MSEC2013)

ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference(MSEC2014)

ASME 2015 International Manufacturing Science and Engineering Conference(MSEC2015)

ASME 2016 11th International Manufacturing Science and Engineering Conference(MSEC2016)

ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing(MSEC2017)

ASME 2018 13th International Manufacturing Science and Engineering Conference(MSEC2018)

Volume 1: Additive Manufacturing; Bio and Sustainable Manufacturing

Volume 3: Manufacturing Equipment and Systems

Volume 4: Processes

Characterization of Nanofinished WC-Co Coating Using Advanced 3D Surface Texture Parameters

Investigation on Smoothing Silicon Carbide Wafer With a Combined Method of Mechanical Lapping and Photocatalysis Assisted Chemical Mechanical Polishing

Machining of Fused Silica Using Pulsed Laser Heating Assistance

Investigation of the Electroplastic Effect Through Nominally Equal Energy Deformation

An Efficient Method for Online Identification of Steady State for Multivariate System

Parametric Optimization for Nano-Finishing of the External Cylindrical Surfaces Using Rotating Core Magnetorheological Finishing Process

On the Comparison Between a Liquid Jet and a Droplet Train

Friction Sintering of Copper Powder Using a New Rapid, Cost Effective and Energy Efficient Process

Performance of Cemented Carbide Cutting Tools With Volcano-Like Texture on Rake Face

The Influence Factors and Prediction of Curve Surface Roughness in Micro-Milling Nickel-Based Superalloy

Dieless Water Jet Incremental Micro-Forming

Experimental Study of Machining of Smart Materials Using Submerged Abrasive Waterjet Micromachining Process

Characterization of Long Period Grating With a Screw Shape Fabricated by a Single-Path Scanning of Femtosecond Laser

A Study on Micro-Milling of Aluminium 6061 and Copper With Respect to Cutting Forces, Surface Roughness and Burr Formation

Experimental Study of Machining of Shape Memory Alloys Using Dry Micro Electrical Discharge Machining Process

Synthesis of Porous Noble Metal Films With Tunable Porosity by Timed Dealloying

Mask-Based Microsphere Photolithography

Hybrid Analytical and Experimental Method for Characterization of Thin Multilayer Bonded Structures Subject to Thermal Loading

Efficient CNC Tool Path Planning Using Point Cloud

Coupled Predicting Surface Variation by Face Milling of Engine Block/Head

Finite Element Analysis and Simulation of Ultrasonic Powder Consolidation Process

The Best and Worst Feed Directions in Milling Chatter

Analytical and Numerical Predictions of Machining-Induced Residual Stress in Milling of Inconel 718 Considering Dynamic Recrystallization

Investigation of High-Speed Nanogrinding Mechanism Based on Molecular Dynamics

Modeling of Tool-Workpiece Interaction in a Voxelized Framework

Molecular Dynamics Simulation Study of Ultrasonic Powder Consolidation Process

Numerical Investigation of Dislocation Density and Grain Size Evolution in Orthogonal Cutting of Pure Titanium Using Microgrooved Cutting Tools

Numerical Investigation of the Damage Evolution in Vibration Assisted Nano Impact Machining by Loose Abrasives With Different Operating Parameters

Outer Diameter to Thickness Ratio Effect on Tube Flaring Behavior

Optimizing Bi-Criteria Permutation Flow Shop Scheduling Problem by Improved NSGA III

Numerical Investigation of the Slot Up Milling of Ti-6Al-4V

Molecular Dynamics Simulation Study of Liquid-Assisted Laser Beam Machining Process

Investigation on the Tool Wear Model and Equivalent Tool Life in End Milling Titanium Alloy Ti6Al4V

High-Fidelity Roll Profile Contact Modeling by Simplified Mixed Finite Element Method

An Automated System for Design for Manufacturability Analysis for Die-Casting

A Finite Element Approach to Calculate Temperatures Arising During Cryogenic Turning of Metastable Austenitic Steel AISI 347

Tool Wear of Superhard Ceramic Coated Tools in Drilling of CFRP

Visualization of Geometrical Deviations in Micro Grinding by Kinematic Simulations

Effect of Welding Parameters on Temperature Distribution During Friction Stir Spot Welding of Commercial Pure Copper Lap Joint

MOEA/D for Multi-Objective Hybrid Flowshop Rescheduling Problem

Performance Evaluation of Minimum Quantity Lubrication With Exfoliated Graphite Nanoplatelets in Turning Titanium Alloy

A Temperature Model for Synchronized Ultrasonic Torrefaction and Pelleting of Biomass for Bioenergy Production

Comparison of Two Damage Models for Prediction of Failure in Stress Corrosion Cracking

Experimental and Simulation Study of Ultrasonic Additive Manufacturing of CFRP/Ti Stacks

Fast Computation of Thermal Field of Direct Metal Deposition: A Preliminary Study Based on Quiet Element Method

Finite Element Study of Laser Peening on Selective Laser Melted A357 Aluminum Alloy During Tension Test

Use of Programmed Piezo Crystal Flexures for Economic Vapor Deposition of Parylene HT® on Unlimited Lengths of Magnet Wire

Analysis of MQL Effect on Forces, Friction, and Surface Roughness in Turning of AISI 4140 Steel

Improvement in Micro Feature Generation in ECDM Process With Powder Mixed Electrolyte

Analysis of Forces During Spot Finishing of Titanium Alloy Using Novel Tool in Magnetic Field Assisted Finishing Process

Edge Trimming of CFRP Composites Using Rotary Ultrasonic Machining: Effects of Ultrasonic Vibration

Evaluation of CFRP Hole Quality in Low Frequency Vibration-Assisted Dry Drilling of CFRP/Ti Stacks

Building Block-Based Assembly of Scalable Metallic Lattices

Water-Jet Assisted Laser Surface Hardening of Medium Carbon Steel Using Fiber Laser

Friction Stir Back Extrusion: Tooling and Process Design for AL-1100-O

Effects of Line Energy on Mechanical Properties, Corrosion and Shape Memory Behavior of Laser-Welded NiTinol Joints

Investigating the Effect of Wire Feed Rate and Wire Tension on the Corner and Profile Accuracies During Wire-EDM of Ti-6Al-4V

Feasibility Study of On-Machine Inspection of Micro Milling Cutter Runout

Investigating the Effect of Process Parameters and Scan Strategy During Laser Forming of Thin Open Celled Aluminium Foam

Rotary Ultrasonic Machining of CFRP: Effects of Abrasive Properties

Characterization of Material Transfer in Friction Stir Processing With a Consumable Tool

Surface Grinding of ZTA Parts Fabricated by Laser Engineered Net Shaping Process: Effects of ZrO2 Content and Ultrasonic Vibration

Multi-Material Digital Light Processing Printer With Material Tower and Spray Cleaning

Influence of Curvature Radius of 40Cr on Mechanical Properties of Laser Cladding Layer

Contribution of Five-Axis Machine Geometric Errors and Workpiece Setup Errors to On-Machine Laser Scanning Measurement

Influence of NC Program Quality and Geometric Errors Onto S-Shape Machining Accuracy

A Universal Postprocessor of General Table-Tilting Type of Five-Axis Machine Tools Without Rotational Tool Center Point Function for Actual NC Code Generation

Enhancement of Motion Accuracy for Cone-Frustum Cutting Motion by Modified NC Program

Voxel Based Cutting Force Simulation of Ball End Milling Considering Cutting Edge Around Center Web

A Laser Triangulation-Based 3D Measurement System for Inner Surface of Deep Holes

Experimental Investigation of Charged Particles Emission in Machining: Towards Process Monitoring

Audio-Based Condition Monitoring in Milling of the Workpiece Material With the Hardness Variation Using Support Vector Machines and Convolutional Neural Networks

Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Effects of Line Energy on Mechanical Properties, Corrosion and Shape Memory Behavior of Laser-Welded NiTinol Joints

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Datta, Susmita Raza, Mohammad Shahid Saha, Partha Pratihar, Dilip Kumar
Copyright Year	2018
Abstract	In this experimental work, the effects of line energy at constant scan speed on quality of bead-on-plate laser welding of NiTinol sheets were investigated. Variations of bead geometry, changes in microstructure, variation of micro-hardness value along the weld-bead, generation of new phase during welding, changes in tensile strength of the welded samples, corrosion behavior of welded and parent material, and changes in phase transformation temperatures were measured for characterization of welded samples. Laser weld-bead profile was changed from a wine glass without base to glass shape with the increasing line energy. Quality aspects of weld-bead geometry quality aspects showed an increasing trend with line energy. Microstructure was changed during welding due to competitive grain growth. Microhardness values gradually increased from weld centre line to base metal. Tensile strength of the material was reduced after welding due to the formation of brittle intermetallics compounds. A dual failure mode for the welded sample was observed; whereas a single mode of failure was detected for parent material. The corrosion properties of the welded samples were found to be better than that of parent material. Phase transformation temperatures were also found to be reduced after welding.
Sponsorship	Manufacturing Engineering Division
File Format	PDF
ISBN	9780791851388
DOI	10.1115/MSEC2018-6537
Volume Number	Volume 4: Processes
Conference Proceedings	ASME 2018 13th International Manufacturing Science and Engineering Conference
Language	English
Publisher Date	2018-06-18
Publisher Place	College Station, Texas, USA
Access Restriction	Subscribed
Subject Keyword	Temperature Welding Intermetallic compounds Glass Mechanical properties Brittleness Microhardness Phase transitions Laser welding Tensile strength Geometry Base metals Corrosion Lasers Nickel titanium alloys Shapes Failure Failure mechanisms
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in