NDLI: Flow Pattern Prediction in Electrical Submersible Pump (ESP) Under Gassy Flow Conditions Using Transient Multiphase CFD Methods With Visualization Experimental Validation

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

ASME 2002 Joint U.S.-European Fluids Engineering Division Conference(FEDSM2002)

ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference(FEDSM2003)

ASME 2005 Fluids Engineering Division Summer Meeting(FEDSM2005)

ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering(FEDSM2006)

ASME/JSME 2007 5th Joint Fluids Engineering Conference(FEDSM2007)

ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences(FEDSM2008)

ASME 2009 Fluids Engineering Division Summer Meeting(FEDSM2009)

ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2010)

ASME-JSME-KSME 2011 Joint Fluids Engineering Conference(AJK2011)

ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2012)

ASME 2013 Fluids Engineering Division Summer Meeting(FEDSM2013)

ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2014)

ASME/JSME/KSME 2015 Joint Fluids Engineering Conference(AJKFluids2015)

ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2016)

ASME 2017 Fluids Engineering Division Summer Meeting(FEDSM2017)

ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting(FEDSM2018)

Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fluid Dynamics of Wind Energy; Bubble, Droplet, and Aerosol Dynamics

Volume 2: Development and Applications in Computational Fluid Dynamics; Industrial and Environmental Applications of Fluid Mechanics; Fluid Measurement and Instrumentation; Cavitation and Phase Change

Volume 3: Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics

Design and Development of an Ultra Low Head Axial Hydro Turbine for Electricity Supply: Part I

Design and Development of an Ultra Low Head Axial Hydro Turbine for Electricity Supply: Part II

Status Review for the Prediction Methods of the Radial Force Caused by a Centrifugal Pump or Volute During Off-Design-Point Operation

Numerical Analysis of Tip Clearance Effects in an Unshrouded Impeller for Liquid Rocket Engines

Experimental Study of Gas-Liquid Flow Through a Multi-Stage, Mixed-Flow Electric Submersible Pump

Investigations on Flow Characteristics in Diffuser-Discharge-Channel of Volute Casing

Investigation of Unsteady Flow in a Submersible Tubular Pumping System

The Effects of the Inlet Guide Vanes on an Axial Pump Under Off Design Points

Gas-Liquid Two-Phase Flow Pattern Analysis Inside a Centrifugal Impeller Based on CFD Results

Numerical and Experimental Study of Inner Flow and Hydraulic Performance of the Mixed-Flow Pump With Low Specific Speed

Optimization and Investigation on the Impact of Centrifugal Impeller Blade Thickness Distribution on Hydro-Induced Vibration

Study on the Reduction of Pressure Fluctuation for a Double-Suction Centrifugal Pump With Staggered Blades

Interactional Effects of Inlet Guide Vane and Blade Angle on Hydraulic Performance Characteristics of a Submersible Axial-Flow Pump

Analysis on Energy-Saving Reconstruction of Jinshan Water Pumping Station in Zhenjiang

Transient Simulation on Dynamic Motion of Mobile Perforated Plate in Two Stage Spring Linked Perforated Plates

Interaction Between Surge Behavior and Internal Flow Field in an Axial-Flow Compressor

Comparison of Experimental, Thermoelastohydrodynamic (TEHD) and Isothermal, Non-Deforming Computational Fluid Dynamics (CFD) Results for Thrust Bearings

Study of the Similarity Laws for Supercritical CO2 Turbine Performance Testing Using High Pressurized Air

Effects of Blade Configuration on the Performance of a Feed Pump

Performance Comparison of Gas Turbine Cycle Combined With Supercritical CO2 Recompression and Regenerative Cycle

Development of a Measurement Method for the Classification and Performance Evaluation of Positive Pressure Ventilation (PPV) Fans

The Role of Meridional Geometry in Aerodynamic Design of Centrifugal Compressor

Investigation of the Causes of Static Instability in Externally Pressurized Gas Journal Bearings

Internal Flow Analysis in a Two-Channel Pump Used for Salt Transportation

Numerical Investigation of the Flow in Hydrostatic Journal Bearings With Porous Material

Vibration Characteristics of a 50MW Francis Type Hydro Power Plant

Remarks on the Recirculation at the Outlet of a Radial Impeller Near Shut-Off

Second Stage Optimization of Helical Groove Seals Using Computational Fluid Dynamics to Evaluate the Dependency of Optimized Design on Preswirl

Investigation of Interaction Between Tip Leakage Flow Generated by Unshrouded Impeller and Diffuser Internal Flow

Clogging Mechanisms of Vortex Pumps: Fibrous Material Motion Capture and Simulation With a CFD and DEM Coupling Method

Influence of Pulsating Flow on Turbine Performance Investigated by DES and PIV

Experimental and Numerical Study on Hydraulic Performances of a Turbopump With and Without an Inducer

The Numerical and Experimental Investigation Into Hydraulic Characteristics of a No-Load Running Check Valve due to Fluid-Structure Interaction

Numerical Study on Transient Dynamics in a Centrifugal Pump Considering Clearance Flow

CFD Predictions and Experiments of Erosion of Elbows in Series in Liquid Dominated Flows

Fluid Properties of Microencapsulated Phase Change Material Slurries

Sand Erosion Model Prediction, Selection and Comparison for Electrical Submersible Pump (ESP) Using CFD Method

Experimental Investigation of Flow Behavior in a Bend and Sand Erosion Pattern Under Single-Phase and Multiphase Flow Conditions

Experimental and Numerical Investigation of Sediment Transport in Sewers

Experimental Investigation of Solid Particle Erosion in Successive Elbows in Gas Dominated Flows

A Test of Steady State Erosion Models

Construction of a Rain Erosion Test Rig for Wind Energy Blade Coatings

Flow Characteristics of Water Jets Discharging From Rectangular and Elliptical Injectors

Validation of a CFD Model Predicting the Effect of High Level Lateral Acceleration Sloshing on the Heat Transfer and Pressure Drop in a Small-Scale Tank in Normal Gravity

Experiments on the Injection of Elliptical Liquid Jets Into a Low Speed Airflow

Simulating the Emptying of a Water Bottle With a Multi-Scale Two-Fluid Approach

Theoretical Analysis of CFD-DEM Mathematical Model Solution Change With Varying Computational Cell Size

A Wall Film Model for Membrane Fouling

Wetness Effect on Transonic Moist-Air Flow Through a Compressor Rotor

Thermophoresis of Nanoparticles in Dilute Gases

Flow Pattern Prediction in Electrical Submersible Pump (ESP) Under Gassy Flow Conditions Using Transient Multiphase CFD Methods With Visualization Experimental Validation

Interactions of Flow Structure With Nano- and Micro-Particles in Turbulent Channel Flows

On Non-Spherical Nanoparticle Dynamics in Turbulent Flows

Two-Phase Flow Visualization for a Hybrid Heat Sink

Particle Image Velocimetry Measurements of Flow Inside a Hydrocyclone With an Air Core

Hybrid LES/RANS Model for Simulation of Particle Dispersion and Deposition

Effect of Pipe Inclination on Settling Slurry Flow Near Deposition Velocity

Strength Analysis of PV Components on Solar Tanker Based on Fluid-Structure Interaction

Threshold Criteria for Components of Predictive Model for Pipe Flow of Broadly-Graded Slurry

Effect of Liquid Viscosity on Two-Phase Flow Development in a Vertical Large Diameter Pipe

Small Bubbles Generation With Swirl Bubblers for SNS Target

Simulations of an Air-Ventilated Strut Crossing Water Surface at Variable Yaw Angles

Phase Separation in Vertical Header of Microchannel Condensers: A Mechanistic Model

CFD Characterization of a Wet Foam Flow Rheological Behavior

Gas Carry-Under in GLCC for Separated and Recombined Outlet Configurations

Numerical Analysis of Effects of Surface Tension and Viscosity on 3 Dimensional Pulsating Heat Pipe

Electroosmotic Flow Separation in a Corrugated Micro-Channel: A Numerical Study

Water-Oil Flow in Square Microchannels With a Crossed Junction

Utilization of Machine Learning to Predict the Surface Tension of Metals and Alloys

In-Plane Hydraulic Resistance Through Paper-Thin Porous Media

Experimental Investigation of Liquid Cooling Through Shallow Copperclad Cavities With Etched Pin-Fin Arrays

Computer-Aided Design of Valves-Integrated Microfluidic Layouts Using Parameter-Guided Electrical Models

Numerical Simulation of Dielectrophoretic Particle Separation

Extending a Hybrid Continuum-Molecular Simulation Method to Solve the Micro/Nanoscale Gas Mixing Problems

Experimental and Numerical Analyses of Unsteady Flow Regimes and Mixing in a Micro T-Mixer

Blood Flow and Mixing Analysis in Split-and-Recombine Micromixer With Offset Fluid Inlets

Computational Analysis of a Microfluidic Magnetophoretic Device for DNA Isolation

Effects of Wettability on Capillary Flow of Non-Newtonian Fluid in Microchannels

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Flow Pattern Prediction in Electrical Submersible Pump (ESP) Under Gassy Flow Conditions Using Transient Multiphase CFD Methods With Visualization Experimental Validation

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Zhu, Jianjun Cuamatzi-Melendez, Ruben Farfan, Jose Alberto Martinez Zhu, Haiwen Zhang, Jiecheng Zhang, Hong-Quan
Copyright Year	2018
Abstract	This paper presents a numerical study of flow pattern recognition inside the rotating impeller of electrical submersible pump (ESP) using the transient multiphase CFD simulations. Based on the previous experimental facility for visualizing flow patterns in an ESP, the entire flow domain is constructed. The high-quality structured mesh comprising hexahedral grids is generated using multi-block technique in ANSYS ICEM. Mesh independence is confirmed by comparing numerical results with catalog curves. For transient two-phase simulation, the realized RNG k-ε turbulence model with volume of fluid (VOF) and Eulerian multiphase models is successfully implemented in ANSYS Fluent solver. The sliding mesh technique is applied to interfaces where rotating and stationary parts interact. By incorporating the same boundary conditions as experimental study, two different cases with fixed liquid flow rates and varying gas flow rates are selected to conduct CFD simulations. The comparison of numerical results against experimental visualizations shows that the two-fluid Eulerian model is superior to VOF model in simulating gas/liquid flow in a rotating ESP. The single-phase simulation results match catalog curves of ESP, which validates the numerical methodology. For gas-liquid simulations, the simulated flow patterns with Eulerian model agree well with visualization experiments. The distinct flow patterns prevailing inside the rotating ESP impeller are captured by CFD simulations, including dispersed bubble flow, bubbly flow, and intermittent flow.
Sponsorship	Fluids Engineering Division
File Format	PDF
ISBN	9780791851579
DOI	10.1115/FEDSM2018-83081
Volume Number	Volume 3: Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics
Conference Proceedings	ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting
Language	English
Publisher Date	2018-07-15
Publisher Place	Montreal, Quebec, Canada
Access Restriction	Subscribed
Subject Keyword	Visualization Turbulence Computational fluid dynamics Submersibles Pattern recognition Flow (dynamics) Transients (dynamics) Fluids Simulation results Simulation Bubbly flow Pumps Gas flow Impellers Flow visualization Boundary-value problems
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in