NDLI: A comparison between the hydrodynamic characteristics of 3D-printed polymer and etched silicon microchannels

Content Provider	Springer Nature Link
Author	O’Conr, John Punch, Jeff Jeffers, Nicholas Stafford, Jason
Copyright Year	2015
Abstract	The use of 3D-printing as a microfabrication approach has potential to address contemporary challenges in microfluidic applications including rapid prototyping, complex channel layouts and sealing. The hydrodynamic characteristics of 3D-printed embedded microchannel arrays have been experimentally examined in this paper. Conventional silicon fabrication processes using deep reactive ion etching techniques (DRIE) and wet-etching (KOH) are used as a benchmark for comparison. Rectangular, trapezoidal and circular cross-sectional shapes were considered. The channel arrays were 3D-printed in vertical and horizontal orientations, to examine the influence of print orientation on channel characteristics. These characteristics included cross-sectional area (CSA), surface features and pressure-flow behavior. The etched silicon channels were found to be dimensionally superior, with channel-to-channel variances in CSA of 2.7 and 5.0 % for DRIE and KOH, respectively. The 3D-printed microchannel arrays demonstrated larger variance in CSA (6.6–20 %) with the vertical printing approach yielding greater dimensional conformity than the horizontal. The 3D-printed microchannel arrays had a consistently smaller value of CSA than the nominal, with a noticeable feature of the horizontal approach being additional sidewall roughness leading to shape distortion. The hydrodynamic measurements revealed the etched silicon microchannel arrays to be in agreement with laminar flow theory (within ±10 % for DRIE and KOH, respectively) using the nominal geometric data. 3D-printing in a vertical orientation produced lower fidelity channels with differences of up to 24.5 % between the actual printed geometry and the nominal input. Horizontally printed microchannels were found to have significantly larger differences of up to 103.8 %. Using the measured geometric data, theory provided a reasonable prediction of the hydrodynamic performance of the printed channels. It was concluded that vertical 3D-printing is superior to the horizontal 3D-printing approach for creating microchannel arrays to transport fluids. This finding is useful to practitioners using 3D-printing for microfabrication and rapid turnaround microfluidic applications.
Starting Page	385
Ending Page	394
Page Count	10
File Format	PDF
ISSN	16134982
Journal	Microfluidics and Nanofluidics
Volume Number	19
Issue Number	2
e-ISSN	16134990
Language	English
Publisher	Springer Berlin Heidelberg
Publisher Date	2015-03-06
Publisher Place	Berlin, Heidelberg
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	3D-printing Microchannels Single-phase flow Friction factor Engineering Fluid Dynamics Biomedical Engineering Analytical Chemistry Nanotechnology and Microengineering
Content Type	Text
Resource Type	Article
Subject	Nanoscience and Nanotechnology Materials Chemistry Condensed Matter Physics Electronic, Optical and Magnetic Materials

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Flow-induced deformation of compliant microchannels and its effect on pressure–flow characteristics

Fabrication of suspended electrokinetic microchannels from directly written sacrificial polymer fibers

Viscoelastic flow development in planar microchannels

On-chip investigation of the hydrodynamic dispersion in rectangular microchannels

Flow characteristics of polar liquids in microfluidic immunosensors

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Hydrodynamics in deformable microchannels

Slip in nanoscale shear flow: mechanisms of interfacial friction

Characterization and evaluation of 3D printed microfluidic chip for cell processing

A comparison between the hydrodynamic characteristics of 3D-printed polymer and etched silicon microchannels

Similar Documents

Flow-induced deformation of compliant microchannels and its effect on pressure–flow characteristics

Fabrication of suspended electrokinetic microchannels from directly written sacrificial polymer fibers

Viscoelastic flow development in planar microchannels

On-chip investigation of the hydrodynamic dispersion in rectangular microchannels

Flow characteristics of polar liquids in microfluidic immunosensors

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips

Hydrodynamics in deformable microchannels

Slip in nanoscale shear flow: mechanisms of interfacial friction

Characterization and evaluation of 3D printed microfluidic chip for cell processing

A comparison between the hydrodynamic characteristics of 3D-printed polymer and etched silicon microchannels