NDLI: Insulation breakdown characteristics of UHV-class gas insulated switchgear for lightning impulse withstand voltage test waveform - K-factor value and front time related characteristics

Content Provider	IEEE Xplore Digital Library
Author	Tsuboi, T. Ueta, G. Okabe, S. Miyashita, M. Inami, K.
Copyright Year	1994
Abstract	The lightning impulse withstand voltage test waveform for electric power equipment is specified in IEC 60060-1 "High-voltage test techniques" as revised in 2010. At present, test standards for UHV-class equipment are under study. Increasing equipment capacity and the digitization of measuring equipment are mentioned as these backgrounds. Withstand voltage test by the standard waveform specified in the previous standard had been difficult (it eventually becomes an overshoot waveform) with increasing equipment capacitance. In response, an evaluation method using the kfactor function (test voltage function) was introduced, whereby the overshoot waveform was converted to the test voltage waveform. To date, concerning these kfactor values, measurement results based on experiments have been reported, but most were from small-scale insulation models with breakdown voltage levels mainly around 100 kV. The present study reports the experimental results of the insulation breakdown characteristics for the lightning impulse withstand voltage test waveform in the largest SF6 gas insulation model possible assuming actual UHV-class gas insulated switchgear. Breakdown voltage and breakdown time were measured with the superimposed oscillation frequency, overshoot rate, and front time as parameters. Following evaluation of the k-factor value based on these experimental results, the k-factor value with the overshoot rate of 10% was almost identical to that of the existing k-factor function. Consequently, evaluation using the existing k-factor function is considered appropriate. Subsequently, the existing k-factor function is most likely to be effective also for UHV-class equipment. In addition, it emerged that changes in the insulation breakdown characteristics due to the extension of the front time were small. It was considered that extending the front time, rather than allowing an excessive overshoot rate, would enable proper verification of the insulation performance as part of standard assuming UHV-class equipment.
Sponsorship	National Natural Science Foundation of China (NSFC) Region Centre Ville de Tours Conseil General D'Indre et Loire ABB IEEE Sandia National Laboratories TOSHIBA
File Size	446809
File Format	PDF
ISSN	10709878
Volume Number	18
Issue Number	5
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2011-10-01
Publisher Place	U.S.A.
Access Restriction	One Nation One Subscription (ONOS)
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Electric breakdown Gas insulation Breakdown voltage Oscillators Voltage measurement IEC standards IEC 60060-1 Lightning impulse withstand voltage test k-factor (test voltagefunction) gas insulated switchgear breakdown voltage
Content Type	Text
Resource Type	Article
Subject	Electrical and Electronic Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Insulation breakdown characteristics of UHV-class oil-immersed transformer for lightning impulse withstand voltage test waveform - K-factor value and front time related characteristics

K-factor value and front time related characteristics of UHV-class air insulation for positive polarity lightning impulse test

Study on lightning impulse test waveform for UHV-class electric power equipment

K-factor value of SF₆ gas gap under non-homogeneous electric field for UHV-class gas-insulated switchgear

K-Factor Value and Front-Time-Related Characteristics in Negative Polarity Lightning Impulse Test for UHV-Class Air Insulation

Comprehensive evaluation of the K-factor values in the lightning impulse voltage test techniques for UHV-class electric power equipment

Study on the K-factor function in the lightning impulse test for UHV-class electric power equipment

Evaluation of K-factor based on insulation characteristics under non-standard lightning impulse waveforms

Basic study of possible waveforms generated in lightning impulse withstand voltage test on UHV equipment

Insulation breakdown characteristics of UHV-class gas insulated switchgear for lightning impulse withstand voltage test waveform - K-factor value and front time related characteristics

Similar Documents

Insulation breakdown characteristics of UHV-class oil-immersed transformer for lightning impulse withstand voltage test waveform - K-factor value and front time related characteristics

K-factor value and front time related characteristics of UHV-class air insulation for positive polarity lightning impulse test

Study on lightning impulse test waveform for UHV-class electric power equipment

K-factor value of SF6 gas gap under non-homogeneous electric field for UHV-class gas-insulated switchgear

K-Factor Value and Front-Time-Related Characteristics in Negative Polarity Lightning Impulse Test for UHV-Class Air Insulation

Comprehensive evaluation of the K-factor values in the lightning impulse voltage test techniques for UHV-class electric power equipment

Study on the K-factor function in the lightning impulse test for UHV-class electric power equipment

Evaluation of K-factor based on insulation characteristics under non-standard lightning impulse waveforms

Basic study of possible waveforms generated in lightning impulse withstand voltage test on UHV equipment

Insulation breakdown characteristics of UHV-class gas insulated switchgear for lightning impulse withstand voltage test waveform - K-factor value and front time related characteristics

K-factor value of SF₆ gas gap under non-homogeneous electric field for UHV-class gas-insulated switchgear