NDLI: Justification for a New Industry Standard for Torque Wrench Calibration

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Scott, R. Hamilton Thomas, J. Smith
Copyright Year	2012
Abstract	In most cases, it is assumed that a manual or hydraulic torque wrench will deliver the requested torque value if set correctly. However, torque wrenches have moving parts that will be subject to wear. They are also subject to harsh operating conditions in the field, which elevates the risk of damage. Calibration is the measurement of a device’s output to a known standard and adjustment to within specific tolerances if necessary. There are several different codes and standards that are followed in the industry, but these practices are normally left up to interpretation. Common sense tells us calibration of torque wrenches on a periodic basis would be advisable. Many in the industry have different policies that are inconsistent when considering several factors of a calibration program. This may be because there is not data available to justify the cost of such a calibration program or misconceptions on what calibration is and when it should be completed. An analysis of the data reveals exactly why regular, periodic calibration of torque wrenches should be an important part of any maintenance program. By using certain methods of calibration, one can mitigate the risk of an un-calibrated torque wrench affecting one’s facility. This paper includes general trends for a sample of torque wrenches that received calibration in order to compare the overall accuracy of the wrenches prior to calibration versus post-calibration. The study was conducted on data obtained from the calibration of hundreds of wrenches over a five year period. This may be considered a reasonable snap-shot of the inaccuracy of torque wrenches that may be expected in the field if recent calibration has not been performed. Due to the highly prevalent misconceptions regarding calibration found in the petrochemical and oil industry, there needs to be an industry standard for torque wrench calibration. Our hypothesis for this paper states that each torque wrench that is used in the field, whether it is new, used, or repaired, shall have an individual calibration performed at no less than a 12 month interval. This standard will prevent material damage to the installation and operation of equipment by correcting both slight deviations from accuracy tolerances and, especially, extreme outliers. The material presented in this paper will show justifcation of an industry standard that should be adopted.
Sponsorship	Pressure Vessels and Piping Division
Starting Page	191
Ending Page	204
Page Count	14
File Format	PDF
ISBN	9780791855027
DOI	10.1115/PVP2012-78217
Volume Number	Volume 3: Design and Analysis
Conference Proceedings	ASME 2012 Pressure Vessels and Piping Conference
Language	English
Publisher Date	2012-07-15
Publisher Place	Toronto, Ontario, Canada
Access Restriction	Subscribed
Subject Keyword	Torque Wear Engineering standards Risk Petrochemicals Calibration Maintenance Torque wrenches Damage
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in