NDLI: Study on Cutting Temperature Modeling of Machined Workpiece in End Milling In-Situ TiB2/7050Al MMCs

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME 2002 International Mechanical Engineering Congress and Exposition(IMECE2002)

ASME 2003 International Mechanical Engineering Congress and Exposition(IMECE2003)

ASME 2004 International Mechanical Engineering Congress and Exposition(IMECE2004)

ASME 2005 International Mechanical Engineering Congress and Exposition(IMECE2005)

ASME 2006 International Mechanical Engineering Congress and Exposition(IMECE2006)

ASME 2007 International Mechanical Engineering Congress and Exposition(IMECE2007)

ASME 2008 International Mechanical Engineering Congress and Exposition(IMECE2008)

ASME 2009 International Mechanical Engineering Congress and Exposition(IMECE2009)

ASME 2010 International Mechanical Engineering Congress and Exposition(IMECE2010)

ASME 2011 International Mechanical Engineering Congress and Exposition(IMECE2011)

ASME 2012 International Mechanical Engineering Congress and Exposition(IMECE2012)

ASME 2013 International Mechanical Engineering Congress and Exposition(IMECE2013)

ASME 2014 International Mechanical Engineering Congress and Exposition(IMECE2014)

ASME 2015 International Mechanical Engineering Congress and Exposition(IMECE2015)

ASME 2016 International Mechanical Engineering Congress and Exposition(IMECE2016)

ASME 2017 International Mechanical Engineering Congress and Exposition(IMECE2017)

ASME 2018 International Mechanical Engineering Congress and Exposition(IMECE2018)

Volume 7: Fluids Engineering

Volume 13: Design, Reliability, Safety, and Risk

Volume 4A: Dynamics, Vibration, and Control

Volume 6A: Energy

Volume 1: Advances in Aerospace Technology

Volume 2: Advanced Manufacturing

Volume 5: Engineering Education

Volume 4B: Dynamics, Vibration, and Control

Volume 12: Materials: Genetics to Structures

Volume 10: Micro- and Nano-Systems Engineering and Packaging

Volume 9: Mechanics of Solids, Structures, and Fluids

Volume 11: Acoustics, Vibration, and Phononics

Volume 8A: Heat Transfer and Thermal Engineering

Air Flow Velocity Field Validation and Turbulence Studies on a Single Rack Model in Data Centers

Numerical Modeling for a Supercritical CO2-Liquid Sodium Hybrid Compact Heat Exchanger

Calibration of External Heat Transfer Coefficients During Cooling of a Partially-Filled Water Tank Using Measured Temperature-Time Data

Preliminary Heat Transfer Simulation Model of a Novel Dynamic Thermal Ablation Probe

CFD Model of the Turboprop Engine Hot Part: Bay Cooling

Combined Computational and Experimental Analysis of Cooldown of a Surrogate Engine Mount Assembly

Study on Cutting Temperature Modeling of Machined Workpiece in End Milling In-Situ TiB2/7050Al MMCs

Analysis of Flow and Thermal Stress in a Blast Furnace Blowpipe

Infrared Thermography to Measure Heat Transfer of a Heated Curved Thin Sheet

Numerical Modeling of Water Impingement and Heat Transfer With Solid Slabs During Secondary Cooling in a Continuous Caster

Modeling for Mineral Redistribution of Coal Blending During Pulverized Coal Combustion

Influence of Renewable Gas Addition to Natural Gas on the Combustion Performance of Cooktop Burners

Correlating Thermal Characteristics From Flow-Reactor Experiments With Primary Reference Fuel

Preheat Limits in Practical Combustor Design: Experiments and Simulations

Optimization of Heat Transfer Process in a Walking Beam Reheat Furnace Using Computational Fluid Dynamics

CFD Modelling of NOx and Soot Formation in Aluminum Anode Baking Furnace

Water/Steam Injection for NOx Reduction in Process Burners

Performance and Emissions Analysis of Partially Pre-Mixed Charge Compression Ignition Combustion

Automated Engine Calibration Optimization Using Online Extremum Seeking

Characteristics of a Non-Premixed Rotating Detonation Combustor Using Natural Gas-Hydrogen Blend at Elevated Air-Preheat Temperature and Backpressure

Micro Combustor Development Using Hydrogen As Fuel

Cubic Formula for Determination of the Drop Size During Atomization of Liquid Jets in Co- and Cross-Flow of Air

Influence of Injection Angle on Pollutant Emissions and Combustion Temperature on a CFM56-3 Engine

Preliminary Development of a Measurement Standard Using a Research Simplex Atomizer

Thermal Conductivity of Colloidal Suspensions of Jet Fuel and Carbon-Based Nanoparticles and its Effect on Evaporation Rate

Molecular Dynamics Simulation of Explosive Boiling on Concave Nanostructured Surface

Investigation of Bubble Departure Radius in Subcooled Pool Boiling Under Microgravity Condition

Theoretical Model of Droplets Motions on Solid Surface With Radial Wettable and Evaporation Rate Gradients

Mechanism Interaction During Droplet Evaporation on Nanostructured Hydrophilic Surfaces

Simulation of Nucleate Boiling With Interfacial Temperature Gradients and Sharp Interface

Theoretical Analysis of Moisture Condensation on a Cold Heat Sink

Cavitation Corrosions in Capillary Pulsating Heat Pipe

Exploration of Variable Conductance Effects During Input and Extraction of Heat From Phase Change Thermal Storage

Multiscale Investigation of Thickness Dependent Melting Thresholds of Nickel Film Under Femtosecond Laser Heating

A Combined GCMC and FVM Simulation Method for CO2 Adsorption in 13X Zeolite Adsorption Bed

Numerical Study on Apparent Permeability of Porous Media in Slip Gas Flows Based on Lattice Boltzmann Method

Utilizing the Integral Technique to Determine the Similarity Variable in Classical Heat Transfer Problems: Thermal Boundary Layer Theory

Effect of Nozzle-to-Target Spacing on Fin Effectiveness and Convective Heat Transfer Coefficient for Array Jet Impingement Onto Novel Micro-Roughness Structures

Simulation of Film Cooling Heat Transfer and Simulation Improvement With a Modified DES Turbulence Model

A Novel Air-Air Heat Exchanger Design and Experimental Validation for Aero-Engines

Large-Eddy Simulations of Low Pressure Turbine Endwall Flow and Heat Transfer

Numerical Study of Forced Convection in Different Fluids From Stationary Heated Cylinders in a Square Enclosure

Studies on the Hard Chrome Plating in Reciprocating Air Compressors

Thermodynamic Analysis and Multi-Objective Optimizations of a Combined Recompression sCO2 Brayton Cycle: tCO2 Rankine Cycles for Waste Heat Recovery

Uniquely Designed Solar Tube in a Natural/Forced Mini-Water Heating System

Efficiency Improvement in Small Internal Combustion Engine Using Exhaust Heat Recovery System

Thermal Analysis of a Subscale Flux Focusing Magnetic Gearbox

Validation and Evaluation of Turbulence Models in Thermal Predictions of a Small Data Center Facility

An Experimental Study on the Convective Heat Transfer Behaviour of Diamond Nanofluids in Electronic Cooling Applications

Two-Wavelength Thermoreflectance and its Application in Temperature Measurement of Micro-Electronic Devices

Cooling Systems for Refuge Alternatives in Hot Mine Conditions

An Embedded Mechatronic Device for Real-Time Monitoring and Prediction of Occupants’ Thermal Comfort

Thermal Properties of a Concrete Aerogel Paste Composite

Experimental Investigation on Heat Transfer Characteristics of Smooth Water Wall Tube of an Ultra-Supercritical CFB Boiler

A Correlation for Maximum Heat Transfer to Cylinders and Spheres in Gas-Fluidized Beds

General Correlation for Heat Transfer During Two-Component Gas-Liquid Flow in Horizontal Pipes

A Correlation for Heat Transfer to Two-Component Gas-Liquid Flowing in Vertical Channels

CFD Analysis of Direct Contact Condensation (DCC) of Subsonic Steam Jets in a Cross-Flow of Water Using a Two-Fluid Model

Three-Dimensional Multiple-Relaxation-Time Lattice Boltzmann Simulation of Vapor Condensation on Subcooled Wall

The Solid-State Electrocaloric Refrigeration With Unimorph Beam and its Analytical Model

Volume 3: Biomedical and Biotechnology Engineering

Volume 6B: Energy

Volume 8B: Heat Transfer and Thermal Engineering

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Study on Cutting Temperature Modeling of Machined Workpiece in End Milling In-Situ TiB2/7050Al MMCs

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Xiong, Yifeng Wang, Wenhu Jiang, Ruisong Lin, Kunyang
Copyright Year	2018
Abstract	During metal cutting, it is well known that the cutting temperature has great influence on the machined surface integrity, especially on the residual stress and machining defects. At present, a lot of analytical modeling work has been done on the cutting temperature of tool, chips and workpiece machined by the side cutting edge during end milling process. To the workpiece surface machined by the bottom cutting edge, the study of temperature modeling is rarely reported. Besides, as a new kind of particulate metal matrix composites (MMCs) with improved mechanical and physical properties, the machining study of in-situ TiB2/7050Al MMCs is not many and no analytical temperature modeling of MMCs has been published up to now. Our study aims to establish an analytical cutting temperature model of workpiece machined by the bottom cutting edge in end milling in-situ TiB2/7050Al MMCs. In this model, the moving heat source method was applied. To meet the actual cutting process, the effect of heating time was also taken into account. With validation, the temperature model shows good agreement with experimental results. It was found that the heat partition ratio conducted from the shear plane heat source to the workpiece increased linearly as thermal number increased, due to the influence of increasing heat conducted into chip by the side cutting edge. The proposed cutting temperature model was of great significance for both the temperature modeling work of end milling and study of Al-MMCs.
File Format	PDF
ISBN	9780791852118
DOI	10.1115/IMECE2018-87319
Volume Number	Volume 8A: Heat Transfer and Thermal Engineering
Conference Proceedings	ASME 2018 International Mechanical Engineering Congress and Exposition
Language	English
Publisher Date	2018-11-09
Publisher Place	Pittsburgh, Pennsylvania, USA
Access Restriction	Subscribed
Subject Keyword	Cutting Temperature Heat Heating Metal cutting Particulate matter Milling Machining Metal matrix composites Shear (mechanics) Modeling Stress
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in