NDLI: Thermal Management Analysis of On-Board High-Pressure Metal Hydride Systems

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Zheng, Yuan Velagapudi, Varsha Pourpoint, Timothee Timothy, S. Fisher Mudawar, Issam Jay, P. Gore
Copyright Year	2006
Abstract	Reversible metal hydrides are ideal vehicular hydrogen storage materials for the realization of on-board filling. Systems utilizing metal hydrides with high hydrogen release pressure (> 3 bar at -30 °C) can provide excellent cold-start capability. Although the required hydrogen filling pressure will also be high accordingly (> 100 bar), high-pressure (HP) metal hydride (MH) systems can store 20% to 50% more hydrogen in the void space between hydride particles in addition to the hydrogen absorbed by the metal alloys. To maintain a sufficiently high hydriding driving force during filling, it is very important to keep the MH temperature below a desirable level (85 °C). This issue becomes more important when the systems operate at high pressures, because the stress limits of materials for the container and other components decrease with increasing temperature. Efficient thermal management is needed to dissipate the large amount of heat produced during the initial rapid compression process (< 20 seconds) and the subsequent fast hydriding process (< 5 minutes). In this paper, thermal management design and analysis of a bench-scale rectangular-shaped HPMH module is reported. This module is approximately 1/70 of a vehicle-scale hydrogen storage tank. The modular approach provides flexibility to apply the knowledge obtained in this study to vehicle-scale designs. A typical AB2 HPMH is used as the hydrogen storage material. During the hydrogen filling process, the time-averaged volumetric heat release rate is approximately 3 MW/m3. Inner coolant passages are adopted to remove the heat. Through a scaling analysis of the energy conservation equation, the results indicate that thermal conduction in the metal hydride bed and convection in the coolant passages are both important factors. For the test module under development, finned tubes in conjunction with two-phase convection have been designed to meet the cooling requirements. Fin designs (material, thickness and spacing) have been evaluated using 3D numerical analysis. The knowledge learned from theoretical and numerical analyses is used to guide the construction of the HPME module, and hydrogen filling tests will be conducted soon.
Sponsorship	Heat Transfer Division
Starting Page	45
Ending Page	52
Page Count	8
File Format	PDF
ISBN	0791847845
DOI	10.1115/IMECE2006-14080
e-ISBN	0791837904
Volume Number	Heat Transfer, Volume 1
Conference Proceedings	ASME 2006 International Mechanical Engineering Congress and Exposition
Language	English
Publisher Date	2006-11-05
Publisher Place	Chicago, Illinois, USA
Access Restriction	Subscribed
Subject Keyword	Hydrogen storage Temperature Compression Construction Cooling Hydrogen Metals Alloys Containers Pressure Convection Stress Vehicles Design Heat conduction High pressure (physics) Heat Numerical analysis Energy conservation Particulate matter Thermal management Coolants
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in