NDLI: Considerations About the Necessary Mesh Density of Bearings in Detailed Finite Element Models

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Kober, Markus Kühhorn, Arnold Stelldinger, Enrico Keskin, Akin
Copyright Year	2014
Abstract	In order to predict properly the behavior of very complex mechanical models, much focus needs to be done on the level of model details as well as the techniques used to predict component movements based on mechanical and thermal loads. In particular bearings and joints play a significant role in big model assemblies such as aero-engines where most of the structures are modeled by solid elements rather than using traditional shell or beam elements. This approach is very complex and expensive in terms of computational effort however can lead to increased simulation accuracy when done properly. This publication will answer questions related to the modeling techniques required for detailed bearings (not only rotor bearings) and joints of an aero-engine application where these components are not idealized or simplified, i.e. the ball in a ball joint is meshed by solid elements. The investigation will discuss the question about the number of elements needed to mesh a ball joint in such a way that a correct rotation is possible. If the mesh is too coarse, a rotation would be impossible due to the faceting of the rotating parts. It will be shown that a proper rotation depends on a correct relation between the radius of the inner ball, the gap size of the bearing and the number of nodes in the circumferential direction. For this relation an analytical formula has been derived and successfully tested at some examples. Furthermore, some finite element codes offer the possibility of smoothed contact surfaces. These options improve the situation but they might cause issues too. For this reason these smoothed contact options are also considered under the aspects mentioned above.
Sponsorship	International Gas Turbine Institute
File Format	PDF
ISBN	9780791845776
DOI	10.1115/GT2014-25624
Volume Number	Volume 7B: Structures and Dynamics
Conference Proceedings	ASME Turbo Expo 2014: Turbine Technical Conference and Exposition
Language	English
Publisher Date	2014-06-16
Publisher Place	Düsseldorf, Germany
Access Restriction	Subscribed
Subject Keyword	Finite element model Simulation Bearings Rotors Shells Aircraft engines Finite element analysis Density Rotation Modeling Stress
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in