NDLI: The Influence of Wrap Angle of Blade on the Internal Flow Field and Hydraulic Performance of Double Suction Pump

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

ASME 2002 Joint U.S.-European Fluids Engineering Division Conference(FEDSM2002)

ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference(FEDSM2003)

ASME 2005 Fluids Engineering Division Summer Meeting(FEDSM2005)

ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering(FEDSM2006)

ASME/JSME 2007 5th Joint Fluids Engineering Conference(FEDSM2007)

ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences(FEDSM2008)

ASME 2009 Fluids Engineering Division Summer Meeting(FEDSM2009)

ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2010)

ASME-JSME-KSME 2011 Joint Fluids Engineering Conference(AJK2011)

ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2012)

ASME 2013 Fluids Engineering Division Summer Meeting(FEDSM2013)

ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2014)

ASME/JSME/KSME 2015 Joint Fluids Engineering Conference(AJKFluids2015)

ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2016)

ASME 2017 Fluids Engineering Division Summer Meeting(FEDSM2017)

ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting(FEDSM2018)

Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fluid Dynamics of Wind Energy; Bubble, Droplet, and Aerosol Dynamics

Detailed Pressure Measurements During the Transition to Rotating Stall in an Axial Compressor: Influence of the Throttling Process

Numerical Comparison Between Steady and Sweeping Jets for Active Flow Control Applications

Modeling of Decelerated Descent of an Elongated Body With Vectored Thrust

Synthetic Jet Flow Control Optimization on SD7003 Airfoil at Low Reynolds Number

Route to Chaos in the Fluidic Pinball

Comparison of Two Active Flow Control Mechanisms of Pure Blowing and Pure Suction on a Pitching NACA0012 Airfoil at Reynolds Number of 1 × 106

The Effects of Wakes on Aerodynamic Characteristics of Flapping Wings in Clap-and-Fling Motion at Re of ~104

Hemodynamics Characteristics of a Four-Way Right-Atrium Bypass Connector With an Optimized Central Diverter

Computational Analysis on Aerodynamics and Vortex Formation of Sleep Apnea

Kinematics and Hydrodynamics of Invertebrate Undulatory Swimming

Numerical Simulation of Airflow and Ellipsoidal Particle Deposition in Human Upper Respiratory Tract

Effect of Non-Newtonian Blood Flow on Coronary Artery Hemodynamics in a Cohort of Patients With Stenosed Artery

Experimental Study on Modeled Caudal Fins Propelling by Elastic Deformation

Investigation on Loading-Induced Fluid Flow in Osteogenesis Imperfecta Bone

Experimental Study of Large-Scale Flow Structures in an Aneurysm

The Mechanism of Three-Dimension Steady Shock Wave Interaction

Mass Flow Performance for Large Aspect Ratio Supersonic Boundary Layer Bleed Holes

Optimization of Piece-Wise Conical Nozzles: Theory and Application

Experimental Study of Flow Around a Rotating Sphere at a Moderate Reynolds Number

Wind Flow Characteristics of a Model Downburst

Multi-Plane Characterization of the Turbulent Boundary Layer

The Influence of Wrap Angle of Blade on the Internal Flow Field and Hydraulic Performance of Double Suction Pump

Assessing the Value and Balance of In-Class Demos and Videos in Fluid Mechanics Lecture

An Integrated Approach for the Teaching of Pipe Network Analysis Using Project Based Learning

CFD and Experiment Investigation of the Mixing Characteristics of Non-Newtonian Fluids in a Stirred Vessel

Internal Groove Influenced Thermohydraulic Performance on an Air-Channel

Refractive Index Matching for Optical Flow Investigation With High Density Stratification

Lattice Boltzmann Model for Incompressible Axisymmetric Thermal Flows With Swirl

Perforated-Plate Turbulence: Orifice Versus Converging Nozzle

Vortex Identification Study of a Turbulent Cavity Flow

Multi-Objective Optimization on Inlet Pipe of a Vertical Inline Pump Based on Genetic Algorithm and Artificial Neural Network

Governing Parameters of Adverse Pressure Gradient Turbulent Boundary Layers

Fluid Flow and Heat Transfer Behavior for Turbulent Flows in a Tube With Vortex Generator Pairs for an Efficient Heat Exchanger

Heat Transfer Enhancement With Delta Winglets Vortex Generator for Different Arrangement in a Circular Tube

Effects of Offset Height on the Turbulent Characteristics of Rectangular Twin Jets

Nozzle Orientation Effects on the Turbulent Structure of Submerged Twin Jets

Coherent Structures and Correlation Fields in the Mixing Transition of a Turbulent Round Free Jet

Effect of Fluid Properties on Slug Dissipation in Enlarged Impacting Tee

Simulation of Coalescence and Breakup of Dispersed Water Droplets in Continuous Oil Phase

Foam Breakup in CFC/GLCC© System

Utilization of Churn Flow Coalescer for Improving Foam Breakup in Gas-Liquid Cylinderical Cyclone

Evaluation of Models for Droplet Shear Effect of Centrifugal Pump

Experimental Investigation of a Flapping Motion Downstream of a Backward Facing Step

Wake Flow Patterns Behind Rotating Smooth Spheres and Baseballs

Mechanistic Modeling of Liquid Carry-Over for 3-Phase Flow in GLCC© Compact Separators

Comparative Evaluation of Single/Twin Round and Elliptic Jets Using Particle Image Velocimetry

An Experimental Study of Surface-Mounted Bluff Bodies Immersed in Deep Turbulent Boundary Layers

Characteristics of Large Vortical Structures in the Shallow Wake Flow With a Gap Near the Bed

Turbulent Flow Characteristics Over Offset Wall Confined Columns in a Channel at Low Reynolds Numbers

Flow Structure Formed by a Sweeping Jet Ejected Into a Main Flow

Force Production Mechanisms of a Heaving and Pitching Foil Operating in the Energy Harvesting Regime

Flow Structures and Vortex Dynamics in the Wake of Three Tandem Prisms

Coherent Structures of Tornado-Like Vortices

Effect of Liquid Level on Gas Carry-Under in GLCC Compact Separators

Effects of the Forcing Frequency on Pulsating Impinging Jet Behavior and the Boundary Layer on the Target Curved Wall

Effect of Corner-Arc on the Flow Structures Around a Square Cylinder

Wing Tip Vortex Development Under a Grid Generated Turbulent Flow

Simulations of Hairpin Vortices in the Presence of a Passive Scalar

Evaluation of Performance and Code-to-Code Variation of a Dynamic Hybrid RANS/LES Model for Simulation of Backward-Facing Step Flow

Effects of an Underbody Device on the Characteristics of a Trailer Truck Wake Region

Influence of Numerical Dissipation on Draft Tube Flows

Assessment of RANS, LES, and Hybrid RANS/LES Models for the Prediction of Low-Pr Turbulent Flows

Implementation of the Ffowcs Williams-Hawkings Equation: Predicting the Far Field Noise From Airfoils While Using Boundary Layer Tripping Mechanisms

Flow Separation Control and Drag Reduction for a Two-Dimensional Boat-Tailed Bluff Body Through Transverse Grooves

Analysis of Pressure Field on Wire-Wrapped Pin Bundle Surface for Concerns of FSI

An New Immersed Boundary Method With Level Set Based Geometry Representation and Volume Fraction Based Body Force Calculation

A Method for Tracking a Solid Body in a Fluid Field in Immersed Boundary Methods

Analysis of Transient Two-Phase Flow in Pressure Safety Valve Outlet Headers

Fluid-Structure Interaction Simulations of Flexible Cylinders in Confined Axial Flow

A Comparison of Strong and Weak Coupling Schemes for Computational Aeroelasticity in OpenFOAM

Stall Flutter Measurements on a Rectangular Wing

Development of an Advanced Wind Turbine Actuator Line Model

Lift and Drag Forces With Respect to Azimuth Position of a Darrieus Wind Turbine

Oxidation-Assisted Pulsatile Three-Stream Non-Newtonian Slurry Atomization

Three-Dimensional Volume of Fluid Simulations of Air Bubble Dynamics in a Converging Nozzle

Experimental Observation of Bubbles Released in Horizontal Water Flow

Bubble Formation From Porous Plates in Liquid Cross-Flow

Numerical Analysis of Droplet Impact on a Smooth Slippery Surface

Effects of Ambient Air Relative Humidity and Surface Temperature on Water Droplet Spreading Dynamics

Nucleate Boiling Heat Transfer and Bubble Dynamics of Water-in-Polyalphaolefin Nanoemulsion

Quantifying the Spatial-Temporal Evolution of Rim/Ligament in Drop Breakup via Digital In-Line Holography

Volume 2: Development and Applications in Computational Fluid Dynamics; Industrial and Environmental Applications of Fluid Mechanics; Fluid Measurement and Instrumentation; Cavitation and Phase Change

Volume 3: Fluid Machinery; Erosion, Slurry, Sedimentation; Experimental, Multiscale, and Numerical Methods for Multiphase Flows; Gas-Liquid, Gas-Solid, and Liquid-Solid Flows; Performance of Multiphase Flow Systems; Micro/Nano-Fluidics

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

The Influence of Wrap Angle of Blade on the Internal Flow Field and Hydraulic Performance of Double Suction Pump

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Chang, Hao Shi, Weidong Li, Wei Liu, Jianrui Zhou, Ling Wang, Chuan Fu, Wei Li, Xiaowei
Copyright Year	2018
Abstract	In order to study the influence rule of wrap angle of blade on the internal flow field and hydraulic performance of double suction pump, 5 kinds of wrap angles of blade with 100°, 110°, 120°, 130° and 140° are designed in this paper. The turbulence model and the grid type are analyzed, the performance of ES350-575 double suction pump is obtained by employ the software CFX. The static pressure and velocity distributions in the cross-section are analyzed. Therefore, the optimal model is obtained, and the relevant external characteristic test is conducted. The result shows that the reasonable increase of the wrap angle of blade can enhance the performance of the pump effectively, which can improve the static pressure and velocity distributions of the internal flow field.
Sponsorship	Fluids Engineering Division
File Format	PDF
ISBN	9780791851555
DOI	10.1115/FEDSM2018-83190
Volume Number	Volume 1: Flow Manipulation and Active Control; Bio-Inspired Fluid Mechanics; Boundary Layer and High-Speed Flows; Fluids Engineering Education; Transport Phenomena in Energy Conversion and Mixing; Turbulent Flows; Vortex Dynamics; DNS/LES and Hybrid RANS/LES Methods; Fluid Structure Interaction; Fluid Dynamics of Wind Energy; Bubble, Droplet, and Aerosol Dynamics
Conference Proceedings	ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting
Language	English
Publisher Date	2018-07-15
Publisher Place	Montreal, Quebec, Canada
Access Restriction	Subscribed
Subject Keyword	Suction pumps Turbulence Internal flow Blades Computer software Pumps Pressure
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in