NDLI: Effect of Deflected Inflow on Flows in a Strongly-Curved 90 Degree Elbow

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

ASME 2002 Joint U.S.-European Fluids Engineering Division Conference(FEDSM2002)

ASME/JSME 2003 4th Joint Fluids Summer Engineering Conference(FEDSM2003)

ASME 2005 Fluids Engineering Division Summer Meeting(FEDSM2005)

ASME 2006 2nd Joint U.S.-European Fluids Engineering Summer Meeting Collocated With the 14th International Conference on Nuclear Engineering(FEDSM2006)

ASME/JSME 2007 5th Joint Fluids Engineering Conference(FEDSM2007)

ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences(FEDSM2008)

ASME 2009 Fluids Engineering Division Summer Meeting(FEDSM2009)

ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2010)

ASME-JSME-KSME 2011 Joint Fluids Engineering Conference(AJK2011)

ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2012)

ASME 2013 Fluids Engineering Division Summer Meeting(FEDSM2013)

ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2014)

ASME/JSME/KSME 2015 Joint Fluids Engineering Conference(AJKFluids2015)

Volume 1A: Symposia, Part 2

Wake Interaction of a Square Cylinder With a Splitter Plate Boundary Layer at a Low Reynolds Number

Wake-Boundary Layer Interactions Behind a Square Cylinder for a Reynolds Number in Periodic Vortex Shedding Regime

Wake-Wake Interactions for a Pair of Staggered Cylinders at Low Reynolds Number (Re = 100)

Design Optimization of a Mixed Flow Waterjet Pump for Performance Improvement Involving Cavitation

Optimization and Validation of Secondary Flow Effect for Flowrange Enhancement in a Low Solidity Circular Cascade Diffuser

Optimal Design of Impeller for Centrifugal Compressor Under the Influence of Fluid-Structure Interaction

Design of Inducer-Impeller Configurations of Self-Priming Vacuum Pump Using Response Surface Method

CFD Analysis of Axial Thrust in Three Stages Centrifugal Pump at Design and Partload Conditions

Development of Shroudless Francis Turbine

Numerical Study on the Main Coolant Pump of Sodium-Cooled Fast Reactor

Conjugate Heat Transfer Analysis of a Rectangular Cooling Channel With 45-Deg Ribs

Studies of the Effect of Vortex-Control Grooves on Pressure Oscillations in a Francis Turbine Draft Tube

Effects of Water-Admission on the Performance of a Centrifugal Pump

Design Optimization of Axial-Flow Pump Blades Based on iSIGHT

Numerical Optimization Research on the Bidirectional Shaft Tubular Pump

The Optimization of Stiffness Performance of Upstream Pumping Mechanical Seal Based on the Response Surface Method

Numerical Simulation of Flow Around Airfoil With Non-Linear RANS Model

Effect of the Accuracy Order of the Discretization Scheme on the Prediction Performance for the Turbulent Flow Structure Inside Fuel Assembly: Sensitivity Study

Numerical Simulation of Three-Dimensional Supercritical Water Flows in Hydrothermal Synthesis Reactors With Arbitrary Geometry

Comparisons of Numerical Methods for Fluid Flow Simulations in a Microorganism Incubating Chamber

Large Eddy Simulation of Through-Flow Effects on Turbulent Heat Transfer Characteristics in Concentric Annulus With Inner Cylinder Rotation

Flow Profiles and Gas/Liquid Separation in First and Second Generation Designs for Ebullated Reactors

Numerical Simulation for Thermal Design of a Gas Water Heater With Turbulent Combined Convection

Performance of Oil Separator According to the Depth of the Outlet Tube

U-RANS Simulation of Single Elbow Pipe Flow Experiments Simulating JSFR Hot-Leg Piping

Development and Elaboration of Numerical Method to Simulate Gas-Liquid-Solid Three-Phase Flows Based on MPS Method

Accuracy Verification of the Turbulent Flame LES Model by a Methane/Air Burner Flame

Turbulent Heat Transfer Enhancement in Round Tubes by Inserting Triple Twisted-Tapes

Thermal-Fluidic Numerical Analysis for the Development of Heat Exchanger in the Propellant Tank Pressurization System of KSLV-II Upper Stage

Modified Unsteady Vortex Lattice Method for Aerodynamics of Flapping Wing Models

Experimental Study on the Forward Flight of the Hawkmoth Using the Dynamically Scaled-Up Robotic Model

3D Volume-of-Fluid (VOF) Based Simulation of Water Impact Problem Using Navier-Stokes Computations

Analysis of Mean Orientation Vector and Mean Curvature in Statistically Steady Turbulent Premixed Combustion

Large Eddy Simulation of Gravity Current Flow Past a Circular Cylinder Using Immersed Boundary Method

Numerical Simulation of Heat Transfer in Shear Flow of Liquid-Solid Two-Phase Media by Immersed Solid Approach

Direct Numerical Simulation of Turbulent Channel Flow With Streamwise System-Rotation

A Meridian Profile Obtained by No Restriction in Optimum Process

Similarity Based Performance Prediction of Organic Rankine Cycle Turbine Using Air Condition Data

Corner Separations Around a NACA65 Blade in a Decelerating Flow

Hydraulic Design and Performance Adjustment of a Reverse Running Pump Turbine Based on a Double Suction Pump

Numerical Prediction of Noise From the Internal Flow in a Centrifugal Blower

High-Efficiency Design Technique of a Single-Channel Submersible Pump Impeller for Waste Treatment

Variation of Hydraulic Performance by Impeller Trimming of a Mixed-Flow Pump

Design Optimization for the Hydraulic Efficiency Improvement of a Mixed-Flow Pump Diffuser

Prediction of the Pressure Pulsation in a Draft Tube for a Part Load Condition Using the LES Approach

Combustion Test of Oxidizer-Rich Single Triplex Injector Preburner for Staged Combustion Cycle Rocket Engine

Research on Structural Optimization for Regenerative-Cooling Thrust Chamber

Effect of Aspect Ratios on the Performance Characteristics of Air Amplifier

Influence of Eccentric Vortex to Performance of Cross Flow Fan

Effect of Port Configurations on the Performance of Hydraulic Actuator

Parameter Optimization and Experimental Research of Small Axial Fans With Splitting Blades

Large-Scale Numerical Simulation of Unsteady Flow Field in a Half-Ducted Propeller Fan Using Lattice Boltzmann Method

Vortex Shedding From Trailing Edge of Rotor Blade of Axial Flow Fan at Design Operating Condition

Turbulence Structure on the Surface of High Speed Liquid Jet

Effects of Flow Loss and Inlet Distortions Caused by Radial Inlet on the Performance of Centrifugal Compressor Stage

Influence of Different Impeller Diameter on Cavitation Performance in an Engine Cooling Water Pump

The Research of Thermal Characteristics of Mechanical Seal Under High Temperature and High Viscosity Medium

Influence Analysis of the Rounding Technique of Spiral Groove Root on the Performance of Upstream Pumping Mechanical Seal

Investigation of Wire Effect in a Wire-Wrapped 37-Pin Fuel Assembly

Investigation of Flatback Airfoil Effect in the Wind Turbine Blade

Effect of Parameter on Characteristics of Active Charge Accumulator for Water Hydraulic System

Wells Turbines With 3-Dimensional Blades: The Performance Under Unsteady Flow Conditions

A Twin Unidirectional Impulse Turbine for Wave Energy Conversion: Effect of Rotor Blade Profile on the Performance

Sound Radiation From Two Side-by-Side Rectangular Cylinders With Slightly Different Aspect Ratios

Fluid-Structure Interaction Analysis for Resonance Investigation of Pump-Turbine Runner

Simulations of Fully Developed Channel Flow by a New High-Resolution Scheme of the Finite-Difference Lattice Boltzmann Method

Near-Wake Flow Structures of a Corner-Chamfered Square Cylinder at Higher Harmonic Excitations

Interference Between a Square and a Circular Cylinder

Aerodynamical Improvement of Delta Wing and Flapping Wing

Numerical Simulation of Supersonic Mixing Enhanced by a Three-Dimensional Cavity Flow

Transonic and Supersonic Flows Past a Rectangular Cavity on Curved Wall

Study on Manufacturing Tolerances for the Laminar Airfoil

Validation of Numerical Analysis to Estimate Airfoil Aerodynamic Characteristics at Low Reynolds Number Region

Numerical Study of Plasma Flow Around a Reentry Vehicle During Atmospheric Reentry With an Unstructured Grid Solver

Aerodynamic Simulation of Closed-Canopy-Type Parafoil for Martian Exploration Mission

A Dynamically Adaptive Lattice Boltzmann Method for Flapping Wing Aerodynamics

Large-Eddy Simulation of Turbulent Flow Over a Heavy Vehicle With Drag Reduction Devices

Lift and Drag Characteristics of an Airfoil and Feedback Flow Control by Flap Actuators in the Low Reynolds Number Region

Drag Reduction of Heavy Vehicles Using Various Side Skirts

Diffusion Control in Circular Jet Using Coaxial Type DBD Plasma Actuator

Effect of Reynolds Number on Coalescence of Droplets in Creeping Flow Through a Tube

Turbulent Annular Pipe Flow in Subcritical Transition Regime: Direct Numerical Simulation of a Large Domain

Development of Removal Technology Using Ozone Microbubble With a Venturi Tube

Effect of Inner Shape on Thermo-Fluid Characteristics of an Electric Vehicle Motor

Development of Efficient Water Purifier by Cavitation Nozzle With Electrode

Gravitational Settling of Glass Fibers on an Air Bubble

Coating Onto a Prewet Substrate With Low Weber Number Liquid Curtain

An Experimental Study on the Heating Process With a Premixed Tubular Flame

Preliminary Investigation on Convective Heat Transfer of Rod Bundle Flow With Spacer Grid for Nuclear Fuel Assembly Application

Electrical Capacitance Tomography Based Sorting Technique for Wasted Plastics

Prediction of Pressure Fluctuation on a Vehicle by Large Eddy Simulation

Aerodynamic Characteristics of a Road Vehicle in Steady-State Cornering

Coupled 6DoF Motion and Aerodynamics Simulation During Pass-By and Overtaken Motions

Towed Underwater SPIV Measurement of Flow Fields Around a Surface-Piercing Cylinder With Free Surface Effects

PIV Measurement of Carbon Dioxide Gas-Liquid Two-Phase Nozzle Flow

Color Particle Image Velocimetry Improved by Decomposition of RGB Distribution Integrated in Depth Direction

Ultrasonic Measurement of Gas Bubbles Advecting Under a Ship Bottom for Investigating Drag Reduction Performance

Measurement Technique for Unsteady Low-Speed Flow Fields Using Poly(TMSP)-Based Pressure Sensitive Paint

Numerical Simulation of Flow Field Around a Circular-Bladed Butterfly Wind Turbine

Influence of Spoke Geometry on Performance and Internal Flow of Contra-Rotating Small-Sized Hydroturbine

Effect of Inlet Nozzle Shape on Performance of Darrieus-Type Hydro-Turbine Operated in Small Open Water Channel

A Twin Unidirectional Impulse Turbine With Fluidic Diode for Wave Energy Conversion

Characteristics of Fresh Water Permeation in Hollow Fiber Membrane Module for Pressure Retarded Osmosis

Relationship Between Velocity Field and Curvature of a Vortex in Two-Dimensional Turbulent Flow

A Study on Particle Sedimentation Depression With Poly Vinyl Alcohol and Surfactant

Simulation of Jet Issued Into Two-Layer Density-Stratified Fluid by Vortex in Cell Method Combined With Immersed Boundary Method

Relationship Between Diffusing-Material Lumps and Organized Structures in Turbulent Flow

The Optimal Formation Condition of the Axis-Symmetry Cyclic Vortex Rings

A Tubular Cross-Flow Filtration Module Based on Chaotic Advection

Geometrical Effects on Fluid Mixing of Pulsatile Flow in Convergent-Divergent Micromixer

Mixing of Matter by a Falling Spherical Particle in a Still Liquid

DNS of Turbulent Channel Flow With a Flexible Square Cylinder

Direct Numerical Simulation of Free Jet Under the Rotational Control

DNS of Heat Transfer Reduction in Viscoelastic Turbulent Channel Flows

Influence of Viscoelasticity on Turbulent Flow Over a Backward-Facing Step

Experimental Investigation of Single Phase Pressure Drop in a Plate Heat Exchanger

PIV-PLIF Experiment on Modification of Turbulent Scalar Diffusion Near the Wall by Uniform Blowing

Turbulent Vorticity Diffusion in the Stronger Wall Jet Managed by a Flat Plate Wing in the Outer Layer

Measurement of the Wall Shear Stress With Sublayer Thin Plate of Thermochromic Liquid Crystal

Efficient Generation of High-Reynolds-Number Homogeneous Turbulence by Disturbances Composed of Two Frequency Components

Effect of Deflected Inflow on Flows in a Strongly-Curved 90 Degree Elbow

Effects of System Rotation on Disturbances Injected Into Laminar Flow

Large Scale Motions and Shear Stress Fluctuations in Turbulent Shear Flow

Experimental and Computational Investigation on Gyromill Wind Turbines Focusing on Wing Camber

Aerodynamics of Clustered Wind Lens Turbines

Performance of a Cross-Flow Wind Turbine Located Above a Windbreak Fence

Wind Tunnel Experiment and CFD Simulation for Multiple Wind Turbine Arrangements

Mixing Technology of Stratified Density Layer by Gas-Liquid Two-Phase Jet

The Effects of Bubble Interface Contamination on Bubble Motion, Bubble-Induced Surrounding Liquid Motion and Mass Transfer

Restructuring Capability of Non-Fractal Aggregate in Simple Shear Flow

Scale-Independent Model on Gravitational Dispersion of Particulate Suspension in Fractal Channels

Wireless Measurement of Fluid Force in Liquid-Solid Flow by Lagrangian Sensor Particle

Flow Characteristics on Fluidized Powder Conveying in a Horizontal Rectangular Channel

Measurement and Analysis on Flow Structure of Inertial Particle Separator

Experimental Characterization of Particle-Laden Air Flow in a Horizontal Pipe

Multidimensional Measurements of Turbulent Boundary Layer Including Scattered Particles Using PIV Technique

Study on Drug Powder Acceleration in a Micro Shock Tube

A Cost-Effective Search of Collision Pairs in Lagrangian Particle Tracking Method

A Numerical Model for the Motion of Large Non-Spherical Object in Fluidized Bed

A Hydraulic Design Procedure of Axial-Flow Pump

Consideration of Sub-Surface Vortices in Suction Sump Using LES

The Numerical Analysis of Control Effect on Cavitation Instabilities in a Cascade With a Random Slit

Internal Flow Condition of Fluid Food Pump Using Semi-Open Impeller

Flow Instability in Off Design Condition of Vaned and Vaneless Diffuser Centrifugal Pump

Study of the Flow Field and Performances of a Centrifugal Pump During Unstable Operating Conditions by CFD

Blockage and Distortion Effects on a Vane Island Type Diffuser Performance of Centrifugal Pumps for Various Flow Rates

Clarification of Performance Curve Instability Mechanism Using Large Eddy Simulation of Internal Flow of a Mixed-Flow Pump

The Effect of Tip Leakage Vortex on Cavitation Performance in Axial Hydro Turbine

Unsteady Flow due to Cavitation in Mixed Flow Pumps Second Report: The Effect of Tip Vortex Cavitation on Hydraulic Force

Numerical Investigation on Performance of Contra-Rotating Axial Flow Pump With Different Rear Rotor Design

Investigation on Rotor-Stator Interaction in a Low Specific Speed Centrifugal Pump

Measurements of Axial and Radial Thrust Forces Working on a Three-Stages Centrifugal Pump Rotor

Cavitation Flow Structure and Unsteady Pressure Pulsation Around a Hydrofoil

Simple Vibration Diagnosis and Experimental Verification Using Eccentricity Shaker

Large Eddy Simulation of Unsteady Vortices in a Pump Sump

Influencing the Part Load Recirculation of a Centrifugal Pump and Avoiding an Instability of the Performance Curve Thereby

Avoiding Sedimentation and Air Entrainment in Pump Sump for Wet Pit Pumping Stations

Adaptive Blade Systems for Increased Operating Range of a Turbomachine

Linking Efficiency to Functional Performance by a Pump Test Standard for Wastewater Pumps

PIV Measurements in Diffuser of the Radial Pump

Volume 2A: Fora, Part 2

Volume 1: Symposia

ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels(FEDSM2016)

ASME 2017 Fluids Engineering Division Summer Meeting(FEDSM2017)

ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting(FEDSM2018)

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Effect of Deflected Inflow on Flows in a Strongly-Curved 90 Degree Elbow

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Iwamoto, Yukiharu Kusuzaki, Ryo Sogo, Motosuke Yasuda, Kazunori Yamano, Hidemasa Tanaka, Masaaki
Copyright Year	2015
Abstract	Wall pressure measurements and flow visualization were conducted for a 90 degree elbow with an axis curvature radius the same as its inner diameter (125 mm, Rc/D = 1). Reynolds numbers 320,000 and 500,000, based on the inner diameter and bulk velocity, were examined. A deflected inflow, having an almost constant velocity slope, was introduced in the present study. The velocity at the inside was 20% faster than the bulk velocity in the plane one diameter upstream of the elbow inlet. Ensemble averaged pressure distributions showed that no difference of normalized pressure could be found in cases of Reynolds numbers of 320,000 and 500,000. Comparisons with a uniform inlet flow case [1] proved that a low-pressure region at the intrados of the elbow was weakened and that a high-pressure region outside strengthened in the deflected inflow case. The present case had a characteristic pressure distribution that the pressure downstream of the elbow increased at the inside until two diameters downstream from the elbow exit. Flow visualization concluded that the corresponding pressure increase was caused by a collision of a strengthened secondary flow convected from the extrados. The unsteady pressure distribution in the present case showed that a circumferential extent of a strongly fluctuating region in the inside and downstream of the elbow decreased, comparing with the uniform inlet flow case.[1] Power spectral density functions of pressures exhibited that the fluctuation having the Strouhal number (based on the inner diameter and bulk velocity) of 0.6 existed in the downstream region of the elbow, which is 0.1 larger than that of the uniform inflow case.
Sponsorship	Fluids Engineering Division
File Format	PDF
ISBN	9780791857328
DOI	10.1115/AJKFluids2015-25596
Volume Number	Volume 1A: Symposia, Part 2
Conference Proceedings	ASME/JSME/KSME 2015 Joint Fluids Engineering Conference
Language	English
Publisher Date	2015-07-26
Publisher Place	Seoul, South Korea
Access Restriction	Subscribed
Subject Keyword	High pressure (physics) Collisions (physics) Reynolds number Spectral energy distribution Flow visualization Pressure measurement Inflow Flow (dynamics) Pressure
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in