NDLI: Effects of intake valve angle on combustion characteristic in an SI engine

Content Provider	Springer Nature Link
Author	Ohm, I. Y.
Copyright Year	2013
Abstract	In this study, 2 different valve-angle engines, one is wide and the other is narrow, were prepared for investigating the effects of the angle on the combustion. For this purpose, the part load performances were evaluated and the pressures were measured for combustion analysis at an engine bench under 5 different operating conditions, varying the compression ratio. The results show that the combustion proceeds so faster in the small IVA engine that its MBT timings are retarded considerably compared with that of large one and result in lower NOx emission level; however, unburned HC is higher because of its geometrical feature. In addition, there is no substantial difference between 2 IVA engines in the timings of combustion initiation and completion as a crank-angle-position-base in spite of the considerable difference of spark timing, on the other hands, the ignition delay of the small IVA is shorter than that of large one. Also the phenomena that the flame propagation is faster and the instant heat release rate is more concentrated and higher in the small were observed. Also, the burn duration of small one is shorter and the combustion process is more accelerated up to the mid-combustion stage; however, the process of large one is faster as the combustion approaches the last stage and the differences of combustion duration reduce as the compression ratio increases. Finally, the engine runs more stable when the IVA is small without any exception because of its rapid burn at the initial combustion stage.
Starting Page	529
Ending Page	537
Page Count	9
File Format	PDF
ISSN	12299138
Journal	International Journal of Automotive Technology
Volume Number	14
Issue Number	4
e-ISSN	19763832
Language	English
Publisher	Springer Berlin Heidelberg
Publisher Date	2013-07-28
Publisher Place	Berlin, Heidelberg
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Valve angle Engine stability Combustion analysis Heat release Mass fraction burned Automotive Engineering
Content Type	Text
Resource Type	Article
Subject	Automotive Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Hydrogen—An Alternative Fuel for Automotive Diesel Engines Used in Transportation

Reduction of emissions with propane addition to a diesel engine

Simplified calculation of combustion progress in the IC engine

Effects of altitude on combustion characteristic during cold start of heavy-duty diesel engine

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Effect of injection condition and swirl on D.I. diesel combustion in a transparent engine system

Effect of intake valve swirl on fuel-gas mixing and subsequent combustion in a CAI engine

Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

Modeling and validation of turbocharged diesel engine airpath and combustion systems

Effects of intake valve angle on combustion characteristic in an SI engine

Similar Documents

Hydrogen—An Alternative Fuel for Automotive Diesel Engines Used in Transportation

Reduction of emissions with propane addition to a diesel engine

Simplified calculation of combustion progress in the IC engine

Effects of altitude on combustion characteristic during cold start of heavy-duty diesel engine

Improving the predictiveness of the quasi-d combustion model for spark ignition engines with flexible intake systems

Effect of injection condition and swirl on D.I. diesel combustion in a transparent engine system

Effect of intake valve swirl on fuel-gas mixing and subsequent combustion in a CAI engine

Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

Modeling and validation of turbocharged diesel engine airpath and combustion systems

Effects of intake valve angle on combustion characteristic in an SI engine