NDLI: Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis

Content Provider	Springer Nature Link
Author	Siswanto, W. A. Nagentrau, M. Mohd Tobi, A. L. Tamin, M. N.
Copyright Year	2016
Abstract	We compared the quasi-static and dynamic simulation responses on elastic-plastic deformation of advanced alloys using Finite element (FE) method with an explicit numerical algorithm. A geometrical model consisting of a cylinder-on-flat surface contact under a normal load and sliding motion was examined. Two aeroengine materials, Ti-6Al-4V and Super CMV (Cr-Mo-V) alloy, were employed in the FE analysis. The FE model was validated by comparative magnitudes of the FE-predicted maximum contact pressure variation along the contact half-width length with the theoretical Hertzian contact solution. Results show that the (compressive) displacement of the initial contact surface steadily increases for the quasi-static load case, but accumulates at an increasing rate to the maximum level for the dynamic loading. However, the relatively higher stiffness and yield strength of the Super CMV alloy resulted in limited deformation and low plastic strain when compared to the Ti-6Al-4V alloy. The accumulated equivalent plastic strain of the material point at the initial contact position was nearly a thousand times higher for the dynamic load case (for example, 6.592 for Ti-6Al-4V, 1.0 kN) when compared to the quasi-static loading (only 0.0072). During the loading step, the von Mises stress increased with a decreasing and increasing rate for the quasi-static and dynamic load case, respectively. A sudden increase in the stress magnitude to the respective peak value was registered due to the additional constraint to overcome the static friction of the mating surfaces during the sliding step.
Starting Page	5093
Ending Page	5101
Page Count	9
File Format	PDF
ISSN	1738494X
Journal	Journal of Mechanical Science and Technology
Volume Number	30
Issue Number	11
e-ISSN	19763824
Language	English
Publisher	Korean Society of Mechanical Engineers
Publisher Date	2016-11-12
Publisher Place	Seoul
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Cylinder-on-flat surface contact Dynamic-explicit Quasi-static Equivalent plastic strain Super CMV Ti-6Al-4V Mechanical Engineering Vibration, Dynamical Systems, Control Industrial and Production Engineering
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain

Prediction of fretting fatigue behavior under elastic-plastic conditions

Influence of heat treated microstructures on the dynamic deformation characteristics of Ti-6Al-4V alloy

Quasi-Static, Dynamic Compressive Properties and Deformation Mechanisms of Ti-6Al-4V Alloy with Gradient Structure

Comparative study of the microstructure of Ti-6Al-4V titanium alloy sheets under quasi-static and high-velocity bulging

Effect of Pre-Strain on Microstructure and Tensile Properties of Ti-6Al-4V at Elevated Temperature

Strain rate dependent behaviors of a hot isotropically processed Ti-6Al-4V: Mechanisms and material model

An equivalent stiffness (ES) method for initial design of tube-based energy absorbers under lateral quasi-static compression

High strain rate and quasi-static tensile behaviour of Ti-6Al-4V after cyclic damage

Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis

Similar Documents

Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain

Prediction of fretting fatigue behavior under elastic-plastic conditions

Influence of heat treated microstructures on the dynamic deformation characteristics of Ti-6Al-4V alloy

Quasi-Static, Dynamic Compressive Properties and Deformation Mechanisms of Ti-6Al-4V Alloy with Gradient Structure

Comparative study of the microstructure of Ti-6Al-4V titanium alloy sheets under quasi-static and high-velocity bulging

Effect of Pre-Strain on Microstructure and Tensile Properties of Ti-6Al-4V at Elevated Temperature

Strain rate dependent behaviors of a hot isotropically processed Ti-6Al-4V: Mechanisms and material model

An equivalent stiffness (ES) method for initial design of tube-based energy absorbers under lateral quasi-static compression

High strain rate and quasi-static tensile behaviour of Ti-6Al-4V after cyclic damage

Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis