NDLI: Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method

Please wait, while we are loading the content...

Efficient frequency response and its direct sensitivity analyses for large-size finite element models using Krylov subspace-based model order reduction

Non-linear analysis of skew thin plate by finite difference method

Prediction of warpage in plastic injection molding based on design of experiments

Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method

Robust sliding mode control for uncertain servo system using friction observer and recurrent fuzzy neural networks?

Modeling of an air motor servo system and robust sliding mode controller design

Design and simulation for a hydraulic actuated quadruped robot

Neuro-fuzzy control strategy for an offshore steel jacket platform subjected to wave-induced forces using magnetorheological dampers

Collision detection and reaction on 7 DOF service robot arm using residual observer

Improvement and experimental validation of a multi-zone model for combustion and NO emissions in CNG fueled spark ignition engine

Numerical simulation of the effects of a suction line heat exchanger on vapor compression refrigeration cycle performance

An experimental study on the transition criteria of open channel natural convection flows

Analysis of the combustion oscillation in a silo-type gas turbine combustor and its suppression

Performance and emission characteristics of a low heat rejection spark ignited engine fuelled with E20

Study of the regenerator constituting material influence on a gamma type Stirling engine

A numerica1 study of fluid flow and heat transfer in different microchannel heat sinks for electronic chip cooling

Experimental analysis of emission reduction by the split injection strategy using close post injection with a double-row nozzle in heavy EGR conditions

Dynamic behavior of flexible sensory hair in an oscillating flow

Efficiency analysis of straight fin with variable heat transfer coefficient and thermal conductivity

Forced convection heat transfer of steam in a square ribbed channel

Evaluation of a hot oil immersion drying method for the upgrading of crushed low-rank coal

Journal of Mechanical Science and Technology : Volume 26, Issue 3, March 2012

Journal of Mechanical Science and Technology : Volume 26, Issue 2, February 2012

Journal of Mechanical Science and Technology : Volume 26, Issue 1, January 2012

Journal of Mechanical Science and Technology : Volume 25

Journal of Mechanical Science and Technology : Volume 24

Journal of Mechanical Science and Technology : Volume 23

Journal of Mechanical Science and Technology : Volume 22

Journal of Mechanical Science and Technology : Volume 21

Journal of Mechanical Science and Technology : Volume 20

Journal of Mechanical Science and Technology : Volume 19

Journal of Mechanical Science and Technology : Volume 18

Journal of Mechanical Science and Technology : Volume 17

Journal of Mechanical Science and Technology : Volume 16

Journal of Mechanical Science and Technology : Volume 15

Journal of Mechanical Science and Technology : Volume 14

Journal of Mechanical Science and Technology : Volume 13

Journal of Mechanical Science and Technology : Volume 12

Journal of Mechanical Science and Technology : Volume 11

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method

Content Provider	Springer Nature Link
Author	Islam, S. Ul Zhou, C. Y. Shah, A. Xie, P.
Copyright Year	2012
Abstract	This paper presents a numerical study of a uniform flow past a rectangular cylinder using the incompressible lattice Boltzmann method (ILBM). Firstly, we use the ILBM to simulate the flow past a square cylinder symmetrically placed in a two-dimensional channel and results are validated against the well-resolved results obtained using finite-difference method and finite-volume method. Secondly, the effects of the aspect ratio defined as R = width/height on the fluid forces, vortex shedding frequency and the flow structures in the wake are investigated. Aspect ratios ranging from 0.15 to 4.00 and four Reynolds numbers Re = 100, 150, 200 and 250 are selected for the investigation. The results show that the effects of aspect ratio on physical quantities such as drag and lift coefficients, Strouhal number and the vortex shedding mechanism are very notable in the range between 0 and 2. In general, the drag coefficient decreases with the aspect ratio and the decreasing rate is more distinct in the range of 0.15 ≤ R ≤ 2.0. There is no local maximum found at around R = 0.6 in the drag coefficient as reported for higher Reynolds numbers in the literature. However the root-mean-square value of the lift coefficient shows a maximum value at R ≈ 0.5 for all Reynolds numbers selected. The variation of Strouhal number with R appears to be different for four selected Reynolds numbers. Especially for Re = 250, a discontinuity in St, as has been observed for higher Reynolds numbers, is observed at around R = 1.45 where multiple peaks are found in the result of Fourier spectrum analysis of the lift force and irregular vortex shedding behavior with no fixed shedding frequency is observed from the instantaneous vorticity contours. Such discontinuity is not observed for Re = 100, 150 and 200. The present results using the LBM are compared with some existing experimental data and numerical studies. The comparison shows that the LBM can capture the characteristics of the bluff body flow well and is a useful tool for bluff body flow studies.
Starting Page	1027
Ending Page	1041
Page Count	15
File Format	PDF
ISSN	1738494X
Journal	Journal of Mechanical Science and Technology
Volume Number	26
Issue Number	4
e-ISSN	19763824
Language	English
Publisher	Korean Society of Mechanical Engineers
Publisher Date	2012-04-11
Publisher Place	Heidelberg
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Aspect ratio effect Bluff body flow Incompressible lattice Boltzmann method Rectangular cylinder Industrial and Production Engineering Mechanical Engineering Vibration, Dynamical Systems, Control
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method †

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method (2012)

Suppression of fluid force on flow past a square cylinder with a detached flat plate at low Reynolds number for various spacing ratios

Lattice Boltzmann approach for the simulation of rarefied gas flow in the slip flow regime

Numerical simulation of external flow around cylinder using improved lattice Boltzmann method

Numerical simulation of a binary gas flow inside a rotating cylinder

Two-Dimensional Numerical Simulation of Flow Around Rectangular Structures With Different Aspect Ratios

Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings

Variation of wake patterns and force coefficients of the flow past square bodies aligned inline

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method

Similar Documents

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method †

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method (2012)

Suppression of fluid force on flow past a square cylinder with a detached flat plate at low Reynolds number for various spacing ratios

Lattice Boltzmann approach for the simulation of rarefied gas flow in the slip flow regime

Numerical simulation of external flow around cylinder using improved lattice Boltzmann method

Numerical simulation of a binary gas flow inside a rotating cylinder

Two-Dimensional Numerical Simulation of Flow Around Rectangular Structures With Different Aspect Ratios

Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings

Variation of wake patterns and force coefficients of the flow past square bodies aligned inline

Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method