NDLI: Development and performance of new hard and wear-resistant engineering materials

Content Provider	Springer Nature Link
Author	Pagounis, E. Lindroos, V. K.
Copyright Year	1997
Abstract	Wear is a major problem in many industrial applications, and the development of wear-resistant materials is therefore both a technical and an economic advantage. Iron-base composites bring new possibilities into the production of wear-resistant materials because of their high hardness and sufficient fracture toughness. They are suitable replacements for the conventional WC/Co cermets owing to their lower fabrication cost, better machinability, weldability, and corrosion resistance. In this study, hot-work steel/Cr$_{3}$C$_{2}$ composites and reference wear-resistant materials were produced by hot isostatic pressing. It was found that the matrix powder size used during processing did not affect the resultant wear properties of the composite. On the other hand, the impact toughness increased when fine matrix powders were used. The increasing reinforcement volume fraction increased significantly the hardness and wear resistance of the composite; however, the impact resistance decreased. The newly proposed hot-work steel/30 vol% Cr$_{3}$C$_{2}$ composite demonstrated a better combination of properties than some of the most abrasion-resistant materials available today.
Starting Page	749
Ending Page	756
Page Count	8
File Format	PDF
ISSN	10599495
Journal	Journal of Materials Engineering and Performance
Volume Number	6
Issue Number	6
e-ISSN	15441024
Language	English
Publisher	Springer-Verlag
Publisher Date	1997-01-01
Publisher Place	New York
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Cr$_{3}$C$_{2}$ reinforcement hot isostatic pressing iron-base composites wear-resistant materials Characterization and Evaluation of Materials Materials Science Tribology, Corrosion and Coatings Quality Control, Reliability, Safety and Risk Engineering Design
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Materials Science Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Microstructure and Mechanical Properties of Al6061-31vol.% B$_{4}$C Composites Prepared by Hot Isostatic Pressing

Synthesis of γ-TiAl based alloy by mechanical alloying and reactive hot isostatic pressing

Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic Pressing

Experiments with a Low-Cost Hot Isothermal Pressing Machine Developed for Superplastic Forming

The effect of hot isostatic pressing on crack initiation, fatigue, and mechanical properties of two cast aluminum alloys

Investigation of Porosity Changes in Cast Ti6Al4V Rods After Hot Isostatic Pressing

Effect of Rhenium Addition on Wear Behavior of Cr-Al$_{2}$O$_{3}$ Metal Matrix Composites

Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Properties of a Spray-Formed Al-4.5 wt.% Cu Alloy

Mechanical and Tribological Properties of HVOF-Sprayed (Cr$_{3}$C$_{2}$-NiCr+Ni) Composite Coating on Ductile Cast Iron

Development and performance of new hard and wear-resistant engineering materials

Similar Documents

Microstructure and Mechanical Properties of Al6061-31vol.% B$_{4}$C Composites Prepared by Hot Isostatic Pressing

Synthesis of γ-TiAl based alloy by mechanical alloying and reactive hot isostatic pressing

Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic Pressing

Experiments with a Low-Cost Hot Isothermal Pressing Machine Developed for Superplastic Forming

The effect of hot isostatic pressing on crack initiation, fatigue, and mechanical properties of two cast aluminum alloys

Investigation of Porosity Changes in Cast Ti6Al4V Rods After Hot Isostatic Pressing

Effect of Rhenium Addition on Wear Behavior of Cr-Al$_{2}$O$_{3}$ Metal Matrix Composites

Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Properties of a Spray-Formed Al-4.5 wt.% Cu Alloy

Mechanical and Tribological Properties of HVOF-Sprayed (Cr$_{3}$C$_{2}$-NiCr+Ni) Composite Coating on Ductile Cast Iron

Development and performance of new hard and wear-resistant engineering materials