NDLI: Compressive Behavior and Damping Property of Mg Alloy/SiC$

Content Provider	Springer Nature Link
Author	Huang, Wenzhan Luo, Hongjie Lin, Hao Mu, Yongliang Ye, Bing
Copyright Year	2016
Abstract	The Mg alloy composite foams reinforced by SiC particles were fabricated by the melt foaming route. The composite foams exhibit uniform cell structure with a size of 0.6-0.8 mm and SiC$_{p}$ distribution. The compressive behavior and damping property of the composite foams were emphasized. It is shown that the yield stress and the plateau stress depend on both porosity and SiC$_{p}$ content of the composite foam, which decrease with the increasing porosity, while sharper fluctuation of flow stress in the plateau region appears under the higher SiC$_{p}$ content. Meanwhile, the SiC$_{p}$ addition elevates the ideal energy absorption efficiency of the Mg alloy foams, but decreases the total amount of energy absorption. Furthermore, the loss factor β is essentially independent of temperature below approximately 250 °C, then increases rapidly with the increasing temperature. It is concluded that the composite foams show typical brittle characteristic and better damping property compared to Mg alloy foams for the SiC$_{p}$ addition. The improvement is attributed to the increasing interfacial microslip and microplasticity deformation derived from the micro-crack between the SiC$_{p}$-Mg alloy interfaces.
Starting Page	587
Ending Page	593
Page Count	7
File Format	PDF
ISSN	10599495
Journal	Journal of Materials Engineering and Performance
Volume Number	25
Issue Number	2
e-ISSN	15441024
Language	English
Publisher	Springer US
Publisher Date	2016-01-11
Publisher Place	New York
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	compressive behavior damping property Mg alloy foam SiC particles Characterization and Evaluation of Materials Tribology, Corrosion and Coatings Quality Control, Reliability, Safety and Risk Engineering Design
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Materials Science Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Evaluation of Methods of Soldering AlSi and AlSi-SiC Particle Composite Al Foams

Precipitation Sequence of a SiC Particle Reinforced Al-Mg-Si Alloy Composite

Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy

Compressive Behavior of Conductive Graphite Foams

The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy

Microstructure and Mechanical Properties of Cr-SiC Particles-Reinforced Fe-Based Alloy Coating

Preparation and Characterization of Binder Less Mg/Mg Alloy Infiltrated SiC$_{p}$ Reinforced Composites

Low-frequency damping behavior of closed-cell Mg alloy foams reinforced with SiC particles

Cyclic Fatigue Fracture Behavior of Spray-Deposited SiC$_{p}$/Al-Si Composite

Compressive Behavior and Damping Property of Mg Alloy/SiC$_{p}$ Composite Foams

Similar Documents

Evaluation of Methods of Soldering AlSi and AlSi-SiC Particle Composite Al Foams

Precipitation Sequence of a SiC Particle Reinforced Al-Mg-Si Alloy Composite

Preparation and Performance of Plasma/Polymer Composite Coatings on Magnesium Alloy

Compressive Behavior of Conductive Graphite Foams

The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy

Microstructure and Mechanical Properties of Cr-SiC Particles-Reinforced Fe-Based Alloy Coating

Preparation and Characterization of Binder Less Mg/Mg Alloy Infiltrated SiC$_{p}$ Reinforced Composites

Low-frequency damping behavior of closed-cell Mg alloy foams reinforced with SiC particles

Cyclic Fatigue Fracture Behavior of Spray-Deposited SiC$_{p}$/Al-Si Composite

Compressive Behavior and Damping Property of Mg Alloy/SiC$_{p}$ Composite Foams