NDLI: The Microstructure, Texture and Mechanical Properties of the Rolled Al/Mg/Al Clad Sheets

Content Provider	Springer Nature Link
Author	Nie, Huihui Liang, Wei Zheng, Liuwei Ren, Xiaoxia Chi, Chengzhong Fan, Haiwei
Copyright Year	2016
Abstract	Two types of three-layered Al/Mg/Al clad sheets were fabricated by hot rolling. The first (sheet A) underwent a single pass with a small rolling reduction of 33% and the second (sheet B) underwent four passes with a large rolling reduction of 71%, and both were subsequently annealed at 200 °C for 1 h. Microstructural examination and tensile tests on the fabricated sheets revealed that 17.8-μm-thick intermetallic compound layers (IMCLs) appeared at AZ31/5052 interfaces in sheet B while none were observed in sheet A. The AZ31 layers in sheets A and B exhibited basal textures with intensities of 15.1 and 9.8, respectively, and only sheet A exhibited tensile twins (TTs) in the AZ31 layer. Recrystallization resulting in grains was preferred near the AZ31/5052 interface and the intersections between TTs. Owing to its larger rolling reduction, more extensive recrystallization was observed in the sheet B component layers than in sheet A. Sheet B exhibited better mechanical properties with a much higher ultimate tensile strength (UTS) than sheet A (230 versus 102 MPa) and a slightly larger elongation (19 versus 17%).This indicates that texture intensities and the extent of recrystallization of component layers have a significant effect upon the mechanical properties of clad sheets.
Starting Page	4695
Ending Page	4705
Page Count	11
File Format	PDF
ISSN	10599495
Journal	Journal of Materials Engineering and Performance
Volume Number	25
Issue Number	11
e-ISSN	15441024
Language	English
Publisher	Springer US
Publisher Date	2016-09-13
Publisher Place	New York
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	clad sheet interface IMCLs recrystallization texture Characterization and Evaluation of Materials Tribology, Corrosion and Coatings Quality Control, Reliability, Safety and Risk Engineering Design
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Materials Science Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Effect of Surplus Phase on the Microstructure and Mechanical Properties in Al-Cu-Mg-Ag Alloys with High Cu/Mg Ratio

Texture Evolution During Annealing in Warm-Rolled and Cold-Rolled Ti-IF Steel

Effect of Scandium on Microstructure and Mechanical Properties of Cast Al-Si-Mg Alloy

Static Recrystallization of Cold Rolled Intermetallic Fe17Al4Cr0.3Zr Alloy

Effect of Sc and Nd on the Microstructure and Mechanical Properties of Al-Mg-Mn Alloy

Microstructure Evolution and Mechanical Properties of As-Cast Pb-Mg-Al Alloys

Microstructure, Bio-corrosion Behavior, and Corrosion Residual Strength of High Strain Rate Rolled Mg-4Zn Alloy Sheet

Regulation Mechanism of Novel Thermomechanical Treatment on Microstructure and Properties in Al-Zn-Mg-Cu Alloy

Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling

The Microstructure, Texture and Mechanical Properties of the Rolled Al/Mg/Al Clad Sheets

Similar Documents

Effect of Surplus Phase on the Microstructure and Mechanical Properties in Al-Cu-Mg-Ag Alloys with High Cu/Mg Ratio

Texture Evolution During Annealing in Warm-Rolled and Cold-Rolled Ti-IF Steel

Effect of Scandium on Microstructure and Mechanical Properties of Cast Al-Si-Mg Alloy

Static Recrystallization of Cold Rolled Intermetallic Fe17Al4Cr0.3Zr Alloy

Effect of Sc and Nd on the Microstructure and Mechanical Properties of Al-Mg-Mn Alloy

Microstructure Evolution and Mechanical Properties of As-Cast Pb-Mg-Al Alloys

Microstructure, Bio-corrosion Behavior, and Corrosion Residual Strength of High Strain Rate Rolled Mg-4Zn Alloy Sheet

Regulation Mechanism of Novel Thermomechanical Treatment on Microstructure and Properties in Al-Zn-Mg-Cu Alloy

Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling

The Microstructure, Texture and Mechanical Properties of the Rolled Al/Mg/Al Clad Sheets