NDLI: Threshold Stress Creep Behavior of Alloy 617 at Intermediate Temperatures

Content Provider	Springer Nature Link
Author	Benz, Julian K. Carroll, Laura J. Wright, Jill K. Wright, Richard N. Lillo, Thomas M.
Copyright Year	2014
Abstract	Creep of Alloy 617, a solid solution Ni-Cr-Mo alloy, was studied in the temperature range of 1023 K to 1273 K (750 °C to 1000 °C). Typical power-law creep behavior with a stress exponent of approximately 5 is observed at temperatures from 1073 K to 1273 K (800 °C to 1000 °C). Creep at 1023 K (750 °C), however, exhibits threshold stress behavior coinciding with the temperature at which a low volume fraction of ordered coherent γ′ precipitates forms. The threshold stress is determined experimentally to be around 70 MPa at 1023 K (750 °C) and is verified to be near zero at 1173 K (900 °C)—temperatures directly correlating to the formation and dissolution of γ′ precipitates, respectively. The γ′ precipitates provide an obstacle to continued dislocation motion and result in the presence of a threshold stress. TEM analysis of specimens crept at 1023 K (750 °C) to various strains, and modeling of stresses necessary for γ′ precipitate dislocation bypass, suggests that the climb of dislocations around the γ′ precipitates is the controlling factor for continued deformation at the end of primary creep and into the tertiary creep regime. As creep deformation proceeds at an applied stress of 121 MPa and the precipitates coarsen, the stress required for Orowan bowing is reached and this mechanism becomes active. At the minimum creep rate at an applied stress of 145 MPa, the finer precipitate size results in higher Orowan bowing stresses and the creep deformation is dominated by the climb of dislocations around the γ′ precipitates.
Starting Page	3010
Ending Page	3022
Page Count	13
File Format	PDF
ISSN	10735623
Journal	Metallurgical and Materials Transactions A
Volume Number	45
Issue Number	7
e-ISSN	15431940
Language	English
Publisher	Springer US
Publisher Date	2014-03-15
Publisher Place	Boston
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Metallic Materials Characterization and Evaluation of Materials Structural Materials Surfaces and Interfaces, Thin Films Nanotechnology
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Metals and Alloys Condensed Matter Physics

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Characterization of Creep-Damaged Grain Boundaries of Alloy 617

Gamma Prime Precipitation, Dislocation Densities, and TiN in Creep-Exposed Inconel 617 Alloy

Topologically Close-Packed μ Phase Precipitation in Creep-Exposed Inconel 617 Alloy

Characterization of Al-Mg Alloy Aged at Low Temperatures

Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interfaces

Nanoindentation Creep Behavior of an Al$_{0.3}$CoCrFeNi High-Entropy Alloy

Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44

Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds

High Strain Rate Compression of Martensitic NiTi Shape Memory Alloy at Different Temperatures

Threshold Stress Creep Behavior of Alloy 617 at Intermediate Temperatures

Similar Documents

Characterization of Creep-Damaged Grain Boundaries of Alloy 617

Gamma Prime Precipitation, Dislocation Densities, and TiN in Creep-Exposed Inconel 617 Alloy

Topologically Close-Packed μ Phase Precipitation in Creep-Exposed Inconel 617 Alloy

Characterization of Al-Mg Alloy Aged at Low Temperatures

Stress Corrosion Cracking Behavior at Inconel and Low Alloy Steel Weld Interfaces

Nanoindentation Creep Behavior of an Al$_{0.3}$CoCrFeNi High-Entropy Alloy

Microstructure and Creep Behavior of High-Pressure Die-Cast Magnesium Alloy AE44

Microstructural Evolution and Creep-Rupture Behavior of A-USC Alloy Fusion Welds

High Strain Rate Compression of Martensitic NiTi Shape Memory Alloy at Different Temperatures

Threshold Stress Creep Behavior of Alloy 617 at Intermediate Temperatures