NDLI: Deformation behavior of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming with silicon mould: Simulation and application

Please wait, while we are loading the content...

Effects of aluminum doping on the microstructure and electrical properties of ZnO-Pr$_{6}$O$_{11}$-Co$_{3}$O$_{4}$-MnCO$_{3}$-Y$_{2}$O$_{3}$ varistor ceramics

Deformation behavior of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming with silicon mould: Simulation and application

Tribological properties of TiAl-Ti$_{3}$SiC$_{2}$ composites

Influence of rare earth modification and homogenization on the microstructure and mechanical properties of recycled can 3004 aluminum

The properties of the sintered copper powder liner

Comparison of hydration properties between cement-GGBS-fly ash blended binder and cement-GGBS-steel slag blended binder

The adsorbing effect of calcined layered double hydroxide for chloride ions in simulated concrete pore solutions

Impact resistance of a novel expanded polystyrene cement-based material

Red cement-based decorative mortar prepared with dry electroplating sludge containing Pb as red pigment

High-temperature phase transition and the activity of tobermorite

Multi-level flocculation structures of fresh cement paste by confocal laser scanning microscope

Preparation and properties of a long-life cementbased mortar used on metal oilcans

Quantitative determination of composition of quaternary cementitious materials

Dynamic elastic modulus of cement paste at early age based on nondestructive test and multiscale prediction model

Evaluation research on applicability of rapid iodide migration test

Effect of competitive adsorption between sodium tripolyphosphate and naphthalene superplasticizer on fluidity of cement paste

Effect of rejuvenators on performance and microstructure of aged asphalt

Melting reconstruction features and solidification mechanism of heavy metal-containing slag

Compatibility and properties of biodegradable blend films with gelatin and poly(vinyl alcohol)

A facile synthesis of carbon black fluid grafting by polyetheramine using neutralization reaction

Synthesis and properties of perfluorinated alkyl silicone oil modified epoxy resin

Manifestations in corrosion prophase of ultra-high strength steel 30CrMnSiNi2A in sodium chloride solutions

Calculation of thermodynamic parameters of Mg-Al-Y alloy

Static recrystallization behavior of Inconel 718 alloy during thermal deformation

Properties of a new dental photocurable resin based on the expanding monomer and three-component photoinitiator system

Evaluation of apatite-coated chitosan microspheres for bone regeneration

Hydroxyapatite bioceramic coatings prepared by hydrothermal-electrochemical deposition method

Mesoporous bioglass/silk fibroin scaffolds as a drug delivery system: Fabrication, drug loading and release in vitro and repair calvarial defects in vivo

Preparation of nano-TiO$_{2}$ by liquid hydrolysis and characterization of its antibacterial activity

Influence of three remineralization materials on physicochemical structure of demineralized enamel

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 29, Issue 1, February 2014

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 28

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 27

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 26

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 25

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 24

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 23

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 22

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 21

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 20

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 19

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 18

Journal of Wuhan University of Technology-Mater. Sci. Ed. : Volume 17

Deformation behavior of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming with silicon mould: Simulation and application

Content Provider	Springer Nature Link
Author	Yang, Fan Shi, Tielin Yu, Qiang Liao, Guanglan
Copyright Year	2014
Abstract	We investigated the deformation behaviors of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming in silicon mould via numerical modeling and experiments. The data needed for the constitutive formulation were obtained from compressive tests to establish a material library for finite-element simulation using a DEFORM 3D software. A constant speed forming process of a micro gear was modeled where the loading force, feature size and amount of deformation in the micro gear in silicon mould were analyzed in detail for the optimal requirements of micro gear forming and the protection of silicon mould. Guided by the modeling parameters, an amorphous metal micro gear was successfully obtained by our home-made superplastic forming system with the optimized parameters (temperature of 683 K, top speed of 0.003 mm/s until the load force reaching limiting value at 1960 N, and a gradually decelerating process for holding the force to the end). Our work gives a good example for optimization of superplastic forming and fabrication of BMGs in microparts.
Starting Page	250
Ending Page	255
Page Count	6
File Format	PDF
ISSN	10002413
Journal	Journal of Wuhan University of Technology-Mater. Sci. Ed.
Volume Number	29
Issue Number	2
e-ISSN	19930437
Language	English
Publisher	Wuhan University of Technology
Publisher Date	2014-04-16
Publisher Place	Heidelberg
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	bulk metallic glass deformation finite-element simulation superplastic forming silicon mould Materials Science
Content Type	Text
Resource Type	Article
Subject	Materials Science

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Study of oxidation behaviour of Zr-based bulk amorphous alloy Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ by thermogravimetric analyser

Effects of heating rate on the process parameters of superplastic forming for Zr$_{55}$Cu$_{30}$Al$_{10}$Ni$_{5}$

Free-volume evolution of glassy Zr$_{65}$Al$_{7.5}$Ni$_{10}$Cu$_{17.5}$ during inhomogeneous deformation

Rolling-induced microstructure change in Zr$_{65}$Al$_{7.5}$Ni$_{10}$Cu$_{12.5}$Ag$_{5}$ bulk metallic glass

Glass Forming Ability and Corrosion Resistance of Zr-Cu-Ni-Al-Ag Bulk Metallic Glass

High glass-forming ability and unusual deformation behavior of new zr-cu-fe-al bulk metallic glasses.

Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties

Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr 55 Al 10 Ni 5 Cu 30 Bulk Metallic Glass

The microprocesses of the quasicrystalline transformation in Zr 65 Ni 10 Cu 7 . 5 Al 7 . 5 Ag 10 bulk metallic glass

Deformation behavior of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming with silicon mould: Simulation and application

Similar Documents

Study of oxidation behaviour of Zr-based bulk amorphous alloy Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ by thermogravimetric analyser

Effects of heating rate on the process parameters of superplastic forming for Zr$_{55}$Cu$_{30}$Al$_{10}$Ni$_{5}$

Free-volume evolution of glassy Zr$_{65}$Al$_{7.5}$Ni$_{10}$Cu$_{17.5}$ during inhomogeneous deformation

Rolling-induced microstructure change in Zr$_{65}$Al$_{7.5}$Ni$_{10}$Cu$_{12.5}$Ag$_{5}$ bulk metallic glass

Glass Forming Ability and Corrosion Resistance of Zr-Cu-Ni-Al-Ag Bulk Metallic Glass

High glass-forming ability and unusual deformation behavior of new zr-cu-fe-al bulk metallic glasses.

Ti (Zr)-Cu-Ni Bulk Metallic Glasses with Optimal Glass-Forming Ability and Their Compressive Properties

Effect of Pre-Introduced Shear Bands Direction on Deformation Behavior in Zr 55 Al 10 Ni 5 Cu 30 Bulk Metallic Glass

The microprocesses of the quasicrystalline transformation in Zr 65 Ni 10 Cu 7 . 5 Al 7 . 5 Ag 10 bulk metallic glass

Deformation behavior of Zr$_{65}$Cu$_{17.5}$Ni$_{10}$Al$_{7.5}$ in superplastic forming with silicon mould: Simulation and application