NDLI: Experimental research on physical and mechanical performance of steel rebars in Chinese modern reinforced concrete buildings built during the Republic of China era from 1912 to 1949

Content Provider	Springer Nature Link
Author	Chun, Qing Balen, Koenraad Pan, Jianwu
Copyright Year	2015
Abstract	In order to study the physical and mechanical performance of rebars in Chinese modern reinforced concrete buildings built in the Republic of China era from 1912 to 1949, 66 rebars including 36 rectangular rebars and 30 round rebars were collected from the different Chinese modern concrete buildings. Surface geometries, mechanical properties, chemical composition and metallographic microstructures of these rebars were tested and analyzed. The test results show that the rib heights of rectangular rebars meet the requirements of current standards, but the rib spaces, the sums of gaps between the ribs, and the relative rib areas do not. For the rectangular rebars, the average yield strength is 278.60 MPa, the average tensile strength is 375.86 MPa, the average ratio of tensile strength and yield strength is 1.35 and the average elongation is 32.25 %. For the round rebars, the average yield strength is 350.65 MPa, the average tensile strength is 464.37 MPa, the average ratio of tensile strength and yield strength is 1.32 and the average elongation is 25.08 %. These two kinds of rebars are all low-carbon and hot-rolled steel bars. According to the test results above, the physical and mechanical performance of rebars in Chinese modern concrete buildings obviously differs from that of the current rebars. Finally, the relationship formulas between strength and Leeb hardness of these two kinds of rebars are presented respectively. These results can be applied to analysis of the bearing capacity and the structural safety assessment of Chinese modern reinforced concrete buildings, which provide calculation basis of the conservation design of these buildings
Starting Page	3679
Ending Page	3692
Page Count	14
File Format	PDF
ISSN	13595997
Journal	Materials and Structures
Volume Number	49
Issue Number	9
e-ISSN	18716873
Language	English
Publisher	Springer Netherlands
Publisher Date	2015-11-26
Publisher Place	Dordrecht
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Chinese modern concrete buildings The Republic of China era from 1912 to 1949 Rebar Physical and mechanical performance Metallographic microstructure Structural Mechanics Materials Science Theoretical and Applied Mechanics Operating Procedures, Materials Treatment Civil Engineering Building Materials
Content Type	Text
Resource Type	Article
Subject	Building and Construction Mechanics of Materials Materials Science Civil and Structural Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Numerical modeling of the rebar/concrete interface: case of the flat steel rebars

Determination of reinforced concrete durability with on-site resistivity measurements

Performance of hybrid rebars as longitudinal reinforcement in normal strength concrete

Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete

Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys

Revisiting the shear design equations for concrete beams reinforced with FRP rebar and stirrup

The design of an instrumented rebar for assessment of corrosion in cracked reinforced concrete

Bond mechanism of FRP rebars to concrete

Structural Applications of Fibre Reinforced Concrete in the Czech Republic

Experimental research on physical and mechanical performance of steel rebars in Chinese modern reinforced concrete buildings built during the Republic of China era from 1912 to 1949

Similar Documents

Numerical modeling of the rebar/concrete interface: case of the flat steel rebars

Determination of reinforced concrete durability with on-site resistivity measurements

Performance of hybrid rebars as longitudinal reinforcement in normal strength concrete

Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete

Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys

Revisiting the shear design equations for concrete beams reinforced with FRP rebar and stirrup

The design of an instrumented rebar for assessment of corrosion in cracked reinforced concrete

Bond mechanism of FRP rebars to concrete

Structural Applications of Fibre Reinforced Concrete in the Czech Republic

Experimental research on physical and mechanical performance of steel rebars in Chinese modern reinforced concrete buildings built during the Republic of China era from 1912 to 1949