NDLI: Dynamic Behavior and High Speed Machining of Ti-6246 and Alloy 625 Superalloys: Experimental and Modeling Approaches

Content Provider	Springer Nature Link
Author	Hokka, M. Gomon, D. Shrot, A. Leemet, T. Bäker, M. Kuokkala, V. T.
Copyright Year	2013
Abstract	Titanium alloys and nickel based superalloys are used in various demanding applications because of their excellent high temperature properties, especially high strength and good corrosion and fatigue resistance. However, the high strength and hardness at high temperatures combined with strong strain hardening can lead to difficulties in machining of these alloys. Finite element simulations can be used to optimize the cutting conditions and to reduce the machining costs. However, simulations of machining operations require accurate material models that can only be built on reliable experimental data. Also, the mechanical properties of materials can only be measured in a limited range of strain and strain rate at the laboratory scale, from which the material behavior has to be extrapolated to the actual machining range. In this work, the mechanical behavior of Titanium-6246 and a nickel based superalloy, similar to Inconel 625, has been studied in details. The Johnson-Cook material model parameters were obtained from the experimental data and the model was used to describe the plastic behavior of the studied alloys in simulations of orthogonal cutting of the material. The model for the Ni- based superalloy was improved by introducing an additional strain softening term that allows decreasing of the strain hardening rate at large deformations. The preliminary simulation results have also been verified experimentally by comparing the simulation results with machining experiments, and the results of the simulations are briefly presented and discussed. The material models are able to reproduce the serrated chips with split shear bands, but the cutting stresses obtained from the simulations are somewhat higher than those obtained from the cutting experiments. Also, some differences were observed in the chip shape, and further development of the material model and simulations is needed.
Starting Page	199
Ending Page	210
Page Count	12
File Format	PDF
ISSN	00144851
Journal	Experimental Mechanics
Volume Number	54
Issue Number	2
e-ISSN	17412765
Language	English
Publisher	Springer US
Publisher Date	2013-08-14
Publisher Place	Boston
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Superalloy Titanium alloy High strain rate Split Hopkinson Pressure Bar FEM Simulations Johnson-Cook model Machining Continuum Mechanics and Mechanics of Materials Characterization and Evaluation of Materials Optics, Optoelectronics, Plasmonics and Optical Devices Structural Mechanics Vibration, Dynamical Systems, Control Mechanics
Content Type	Text
Resource Type	Article
Subject	Mechanics of Materials Mechanical Engineering Aerospace Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Strain rate dependent behaviors of a hot isotropically processed Ti-6Al-4V: Mechanisms and material model

Interrupted Test of Advanced High Strength Steel with Tensile Split Hopkinson Bar Method

Comparison of Low Impedance Split-Hopkinson Pressure Bar Techniques in the Characterization of Polyurea

A Tensile Split Hopkinson Bar for Testing Particulate Polymer Composites Under Elevated Rates of Loading

Kolsky Bar Wave Separation Using a Photon Doppler Velocimeter

Full Field Strain Measurement in Compression and Tensile Split Hopkinson Bar Experiments

Annular Pulse Shaping Technique for Large-Diameter Kolsky Bar Experiments on Concrete

Influence of Specimen Geometry on Split Hopkinson Tensile Bar Tests on Sheet Materials

Using Digital Image Correlation (DIC) in Dynamic Punch Tests

Dynamic Behavior and High Speed Machining of Ti-6246 and Alloy 625 Superalloys: Experimental and Modeling Approaches

Similar Documents

Strain rate dependent behaviors of a hot isotropically processed Ti-6Al-4V: Mechanisms and material model

Interrupted Test of Advanced High Strength Steel with Tensile Split Hopkinson Bar Method

Comparison of Low Impedance Split-Hopkinson Pressure Bar Techniques in the Characterization of Polyurea

A Tensile Split Hopkinson Bar for Testing Particulate Polymer Composites Under Elevated Rates of Loading

Kolsky Bar Wave Separation Using a Photon Doppler Velocimeter

Full Field Strain Measurement in Compression and Tensile Split Hopkinson Bar Experiments

Annular Pulse Shaping Technique for Large-Diameter Kolsky Bar Experiments on Concrete

Influence of Specimen Geometry on Split Hopkinson Tensile Bar Tests on Sheet Materials

Using Digital Image Correlation (DIC) in Dynamic Punch Tests

Dynamic Behavior and High Speed Machining of Ti-6246 and Alloy 625 Superalloys: Experimental and Modeling Approaches