NDLI: Modeling of Temperature Conditions Between Temperature Artifact and Black Test Corner

Content Provider	Springer Nature Link
Author	Beges, G.
Copyright Year	2011
Abstract	The case study in this article is temperature condition modeling between a temperature artifact and a black test corner measuring instrument. The black test corner is an instrument which consists of two wooden walls and a floor, with build-in thermocouples fixed on the back side of the copper disks. The front of the disk is flush with the surface of the board. The black test corner is used for measuring how the temperature of a household appliance is influencing the surroundings in the real environment, e.g., in the kitchen, the living room, etc. The temperature artifact as presented in this article is a specially developed heating plate which is very stable and can be set to different temperatures. Technical standards for conformity assessment usually describe only what should be measured, in some cases also how accurate the measurement should be, but not what kind of measuring instrument should be used. Therefore, it sometimes happens that measurements are performed with improper equipment or in an improper way. For the same level of appliance conformance testing, laboratories shall use the same testing procedures and comparable measuring instruments. This article deals with the analysis of influencing parameters when measuring the temperature rise using the black test corner. Modeling of temperature conditions between a temperature artifact and a black test corner, using commercial modeling software, was performed to find out whether this modeling can be used for detailed evaluation of all possible influencing parameters of the mentioned testing procedure. A scheme and a list of influencing parameters that has to be modeled in the following research is prepared to arrange an optimal experiment.
Starting Page	2325
Ending Page	2332
Page Count	8
File Format	PDF
ISSN	0195928X
Journal	International Journal of Thermophysics
Volume Number	32
Issue Number	11-12
e-ISSN	15729567
Language	English
Publisher	Springer US
Publisher Date	2011-11-16
Publisher Place	Boston
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	Black test corner Heat distribution Measurement uncertainty contributions Optimal experiment Temperature conditions modeling Industrial Chemistry/Chemical Engineering Condensed Matter Physics Physical Chemistry Mechanics
Content Type	Text
Resource Type	Article
Subject	Condensed Matter Physics

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Calibration of Heat Stress Monitor and its Measurement Uncertainty

Measurement Uncertainty of Dew-Point Temperature in a Two-Pressure Humidity Generator

A Comparison of DHW Algorithm for Temperature Distribution Calculation with Fourier’s Algorithm for Transmission of Heat between Discrete Bodies

Modeling of Transient Heat Transfer in Temperature Fixed Points: Indium Cell Design

Specific Heat Measurement of High Temperature Thermal Insulations by Drop Calorimeter Method

Evaluation of Flat Surface Temperature Probes

Thermodynamic Radiation Thermometry Using Radiometers Calibrated for Radiance Responsivity

Uncertainty Analysis for Emissivity Measurement at Elevated Temperatures with an Infrared Camera

Round-Robin Test of Heat Flux Sensors

Modeling of Temperature Conditions Between Temperature Artifact and Black Test Corner

Similar Documents

Calibration of Heat Stress Monitor and its Measurement Uncertainty

Measurement Uncertainty of Dew-Point Temperature in a Two-Pressure Humidity Generator

A Comparison of DHW Algorithm for Temperature Distribution Calculation with Fourier’s Algorithm for Transmission of Heat between Discrete Bodies

Modeling of Transient Heat Transfer in Temperature Fixed Points: Indium Cell Design

Specific Heat Measurement of High Temperature Thermal Insulations by Drop Calorimeter Method

Evaluation of Flat Surface Temperature Probes

Thermodynamic Radiation Thermometry Using Radiometers Calibrated for Radiance Responsivity

Uncertainty Analysis for Emissivity Measurement at Elevated Temperatures with an Infrared Camera

Round-Robin Test of Heat Flux Sensors

Modeling of Temperature Conditions Between Temperature Artifact and Black Test Corner