NDLI: Effects of helical angle of router bit on acoustic emission

Content Provider	Springer Nature Link
Author	Cyra, Grzegorz Tanaka, Chiaki Yoshibu, Masahiro Nishi, Yoshihiko
Copyright Year	1998
Abstract	The purpose of this study was to investigate the effects of changes in the helical angle of the router bit on the acoustic emission (AE) signal for various workpiece grain angles. The helical angle varied from 0° to 50° at 10° increments. The workpiece grains were oriented from 0 degrees (cutting parallel to the grain), through 90° (cutting end of the grain), to 165° at 15° increments. The AE signals and machined surface roughness were measured in an attempt to clarify the relations between them. The results were summarized as follows: (1) The AE signals were lowest in the “with the grain” cutting zones and slightly increased in the “against the grain” cutting zones; they rapidly reached the highest values at the 135°–165° grain angles. The greater the helical angle of the router bit, the smaller were the AE count rates for each grain angle investigated. There was no significant change in AE generation for helical angles of 0° and 10°. Moreover, the greater the feed rate, the greater was the AE count rate for every cutting condition investigated. (2) The surface roughness, similar to the AE count rate, had the lowest values in the “with the grain” cutting zones, slightly increased until the 120° grain angle, and then rapidly become extremely rough, reaching a maximum at the grain angles of 135°–150°. There was no remarkable change in the machined surface roughness while routing “with the grain” using the router bit of greater helical angle. However, when routing “against the grain,” the greater the helical angle the smoother was the machined surface. (3) There were correlations between the AE count rate and the machined surface roughness for each helical angle investigated. Therefore, acoustic emission has shown promise for monitoring and controlling the routing operation, including various grain angles and helical angles of the router bit.
Starting Page	169
Ending Page	176
Page Count	8
File Format	PDF
ISSN	14350211
Journal	Journal of Wood Science
Volume Number	44
Issue Number	3
e-ISSN	16114663
Language	English
Publisher	Springer-Verlag
Publisher Date	1998-01-01
Publisher Place	Tokyo
Access Restriction	Subscribed
Subject Keyword	Routing Helical angle Grain angle Acoustic emission Surface roughness Wood Science & Technology Materials Science Characterization and Evaluation of Materials
Content Type	Text
Resource Type	Article
Subject	Biomaterials Forestry

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Effect of the helix angle of router bits on chip formation and energy consumption during milling of solid wood

Bond strength of end-grain joints and its dependence on surface roughness and adhesive spread

Twist of wood studs: dependence on spiral grain gradient

Effects of grain angles of face veneer on surface wave velocities and dynamic shear moduli of wood-based composites

Time dependence of Poisson’s effect in wood IV: influence of grain angle

Microscopic processes of shearing fracture of old wood, examined using the acoustic emission technique

Effects of time, temperature, and humidity on acetaldehyde emission from wood-based materials

Evaluation of surface smoothness using a light-sectioning shadow scanner

Wood friction characteristics during exposure to high pressure: influence of wood/metal tool surface finishing conditions

Effects of helical angle of router bit on acoustic emission

Similar Documents

Effect of the helix angle of router bits on chip formation and energy consumption during milling of solid wood

Bond strength of end-grain joints and its dependence on surface roughness and adhesive spread

Twist of wood studs: dependence on spiral grain gradient

Effects of grain angles of face veneer on surface wave velocities and dynamic shear moduli of wood-based composites

Time dependence of Poisson’s effect in wood IV: influence of grain angle

Microscopic processes of shearing fracture of old wood, examined using the acoustic emission technique

Effects of time, temperature, and humidity on acetaldehyde emission from wood-based materials

Evaluation of surface smoothness using a light-sectioning shadow scanner

Wood friction characteristics during exposure to high pressure: influence of wood/metal tool surface finishing conditions

Effects of helical angle of router bit on acoustic emission