NDLI: Impact of typical steady-state conditions and transient conditions on flow ripple and its test accuracy for axial piston pump

Content Provider	Springer Nature Link
Author	Xu, Bing Hu, Min Zhang, Junhui
Copyright Year	2015
Abstract	The current research about the flow ripple of axial piston pump mainly focuses on the effect of the structure of parts on the flow ripple. Therein, the structure of parts are usually designed and optimized at rated working conditions. However, the pump usually has to work in large-scale and time-variant working conditions. Therefore, the flow ripple characteristics of pump and analysis for its test accuracy with respect to variant steady-state conditions and transient conditions in a wide range of operating parameters are focused in this paper. First, a simulation model has been constructed, which takes the kinematics of oil film within friction pairs into account for higher accuracy. Afterwards, a test bed which adopts Secondary Source Method is built to verify the model. The simulation and tests results show that the angular position of the piston, corresponding to the position where the peak flow ripple is produced, varies with the different pressure. The pulsating amplitude and pulsation rate of flow ripple increase with the rise of pressure and the variation rate of pressure. For the pump working at a constant speed, the flow pulsation rate decreases dramatically with the increasing speed when the speed is less than 27.78% of the maximum speed, subsequently presents a small decrease tendency with the speed further increasing. With the rise of the variation rate of speed, the pulsating amplitude and pulsation rate of flow ripple increase. As the swash plate angle augments, the pulsating amplitude of flow ripple increases, nevertheless the flow pulsation rate decreases. In contrast with the effect of the variation of pressure, the test accuracy of flow ripple is more sensitive to the variation of speed. It makes the test accuracy above 96.20% available for the pulsating amplitude of pressure deviating within a range of ±6% from the mean pressure. However, with a variation of speed deviating within a range of ±2% from the mean speed, the attainable test accuracy of flow ripple is above 93.07%. The model constructed in this research proposes a method to determine the flow ripple characteristics of pump and its attainable test accuracy under the large-scale and time-variant working conditions. Meanwhile, a discussion about the variation of flow ripple and its obtainable test accuracy with the conditions of the pump working in wide operating ranges is given as well.
Starting Page	1012
Ending Page	1022
Page Count	11
File Format	PDF
ISSN	10009345
Journal	Chinese Journal of Mechanical Engineering
Volume Number	28
Issue Number	5
e-ISSN	21928258
Language	English
Publisher	Chinese Mechanical Engineering Society
Publisher Date	2015-08-14
Publisher Place	Beijing
Access Restriction	Subscribed
Subject Keyword	axial piston pump flow ripple test accuracy steady-state condition transient condition wide operating ranges Mechanical Engineering Theoretical and Applied Mechanics Manufacturing, Machines, Tools Engineering Thermodynamics, Heat and Mass Transfer Power Electronics, Electrical Machines and Networks Electronics and Microelectronics, Instrumentation
Content Type	Text
Resource Type	Article
Subject	Industrial and Manufacturing Engineering Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Pre-compression volume on flow ripple reduction of a piston pump

Output characteristics of a series three-port axial piston pump

Investigation on the radial micro-motion about piston of axial piston pump

Computational analysis of centrifugal pump delivering solid-liquid two-phase flow during startup period

Distribution characteristics and impact on pump’s efficiency of hydro-mechanical losses of axial piston pump over wide operating ranges

Influence of blade thickness on transient flow characteristics of centrifugal slurry pump with semi-open impeller

3D Particle image velocimetry test of inner flow in a double blade pump impeller

Experimental study of the pressure fluctuations in a pump turbine at large partial flow conditions

Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellers

Impact of typical steady-state conditions and transient conditions on flow ripple and its test accuracy for axial piston pump

Similar Documents

Pre-compression volume on flow ripple reduction of a piston pump

Output characteristics of a series three-port axial piston pump

Investigation on the radial micro-motion about piston of axial piston pump

Computational analysis of centrifugal pump delivering solid-liquid two-phase flow during startup period

Distribution characteristics and impact on pump’s efficiency of hydro-mechanical losses of axial piston pump over wide operating ranges

Influence of blade thickness on transient flow characteristics of centrifugal slurry pump with semi-open impeller

3D Particle image velocimetry test of inner flow in a double blade pump impeller

Experimental study of the pressure fluctuations in a pump turbine at large partial flow conditions

Effects of meridional flow passage shape on hydraulic performance of mixed-flow pump impellers

Impact of typical steady-state conditions and transient conditions on flow ripple and its test accuracy for axial piston pump