NDLI: Overall evaluation of the effect of residual stress induced by shot peening in the improvement of fatigue fracture resistance for metallic materials

Content Provider	Springer Nature Link
Author	Wang, Renzhi Ru, Jilai
Copyright Year	2015
Abstract	Before 1980s, the circular suspension spring in automobile subjected to torsion fatigue load, under the cyclic normal tensile stresses, the majority of fatigue fracture occurred was in normal tensile fracture mode(NTFM) and the fracture surface was under 45° diagonal. Because there exists the interaction between the residual stresses induced by shot peening and the applied cyclic normal tensile stresses in NTFM, which represents as “stress strengthening mechanism”, shot peening technology could be used for improving the fatigue fracture resistance(FFR) of springs. However, since 1990s up to date, in addition to regular NTFM, the fatigue fractures occurred of peened springs from time to time are in longitudinal shear fracture mode(LSFM) or transverse shear fracture mode(TSFM) with the increase of applied cyclic shear stresses, which leads to a remarkable decrease of FFR. However, LSFM/TSFM can be avoided effectively by means of shot peening treatment again on the peened springs. The phenomena have been rarely happened before. At present there are few literatures concerning this problem. Based upon the results of force analysis of a spring, there is no interaction between the residual stresses by shot peening and the applied cyclic shear stresses in shear fracture. This means that the effect of “stress strengthening mechanism” for improving the FFR of LSFM/TSFM is disappeared basically. During shot peening, however, both of residual stress and cyclic plastic deformed microstructure are induced synchronously like “twins” in the surface layer of a spring. It has been found for the first time by means of force analysis and experimental results that the modified microstructure in the “twins” as a “structure strengthening mechanism” can improve the FFR of LSFM/TSFM. At the same time, it is also shown that the optimum technology of shot peening strengthening must have both “stress strengthening mechanism” and “structure strengthening mechanism” simultaneously so that the FFR of both NTFM and LSFM/TSFM can be improved by shot peening.
Starting Page	416
Ending Page	421
Page Count	6
File Format	PDF
ISSN	10009345
Journal	Chinese Journal of Mechanical Engineering
Volume Number	28
Issue Number	2
e-ISSN	21928258
Language	English
Publisher	Chinese Mechanical Engineering Society
Publisher Date	2015-02-14
Publisher Place	Beijing
Access Restriction	Subscribed
Subject Keyword	shot peening strengthening principle fatigue fracture resistance strengthening mechanisms of fatigue fracture classification on fatigue fracture mode Mechanical Engineering Theoretical and Applied Mechanics Manufacturing, Machines, Tools Engineering Thermodynamics, Heat and Mass Transfer Power Electronics, Electrical Machines and Networks Electronics and Microelectronics, Instrumentation
Content Type	Text
Resource Type	Article
Subject	Industrial and Manufacturing Engineering Mechanical Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Simulation on Residual Stress of Shot Peening Based on a Symmetrical Cell Model

Low cycle fatigue and strengthening mechanism of cold extruded large diameter internal thread of Q460 steel

Fatigue life prediction under service load considering strengthening effect of loads below fatigue limit

Residual fatigue life prediction of ball bearings based on Paris law and RMS

Heat transfer and resistance characteristics of conical spiral tube bundle based on field synergy principle

Analysis method and principle of dual-mode electro-mechanical variable transmission program

New Family of RPR-Equivalent Parallel Mechanisms: Design and Application

Fatigue crack growth rate of Ti-6Al-4V considering the effects of fracture toughness and crack closure

Design principle of high-precision flexure mechanisms based on parasitic-motion compensation

Overall evaluation of the effect of residual stress induced by shot peening in the improvement of fatigue fracture resistance for metallic materials

Similar Documents

Simulation on Residual Stress of Shot Peening Based on a Symmetrical Cell Model

Low cycle fatigue and strengthening mechanism of cold extruded large diameter internal thread of Q460 steel

Fatigue life prediction under service load considering strengthening effect of loads below fatigue limit

Residual fatigue life prediction of ball bearings based on Paris law and RMS

Heat transfer and resistance characteristics of conical spiral tube bundle based on field synergy principle

Analysis method and principle of dual-mode electro-mechanical variable transmission program

New Family of RPR-Equivalent Parallel Mechanisms: Design and Application

Fatigue crack growth rate of Ti-6Al-4V considering the effects of fracture toughness and crack closure

Design principle of high-precision flexure mechanisms based on parasitic-motion compensation

Overall evaluation of the effect of residual stress induced by shot peening in the improvement of fatigue fracture resistance for metallic materials