Please wait, while we are loading the content...
| Content Provider | Springer Nature Link |
|---|---|
| Author | Mehta, Kush P. Badheka, Vishvesh J. |
| Copyright Year | 2015 |
| Abstract | In the present investigation, two different tool designs along with different process parameters such as tool pin offset, welding speed and axial plunge load were used to produce dissimilar copper to aluminium (6061-T651) friction stir welding joints. Macrostructure and microstructure analysis, tensile test, hardness measurement test, scattered electron microscopy and electron-dispersive tests were performed to evaluate the weldability and weld properties of dissimilar copper–aluminium joints. The results revealed that defect-free dissimilar friction stir welding was achieved using a cylindrical tool pin profile. On the other hand, the taper tool pin profile was not found to be suitable for dissimilar friction stir welding system (FSW). Maximum tensile strength of 133 MPa and hardness of 181 HV (in the nugget zone) were obtained when FSW process parameters such as rotational speed, welding speed, tilt angle, tool pin offset and tool pin profile were kept at 1500 rpm, 40 mm/min, 2°, 2 mm and cylindrical profile, respectively. Axial plunge load value depended on the shoulder diameter as well as on the tilt angle. Axial plunge load range from 600 to 700 kgf was used to achieve defect-free copper to AA6061-T651 (of 6.3 mm in thickness) friction stir welded joint. |
| Starting Page | 2073 |
| Ending Page | 2082 |
| Page Count | 10 |
| File Format | |
| ISSN | 02683768 |
| Journal | The International Journal of Advanced Manufacturing Technology |
| Volume Number | 80 |
| Issue Number | 9-12 |
| e-ISSN | 14333015 |
| Language | English |
| Publisher | Springer London |
| Publisher Date | 2015-05-01 |
| Publisher Place | London |
| Access Restriction | One Nation One Subscription (ONOS) |
| Subject Keyword | Dissimilar joint Friction stir welding Tool design Macrostructure Weld properties Industrial and Production Engineering Production/Logistics/Supply Chain Mechanical Engineering Computer-Aided Engineering (CAD, CAE) and Design |
| Content Type | Text |
| Resource Type | Article |
| Subject | Industrial and Manufacturing Engineering Control and Systems Engineering Mechanical Engineering Computer Science Applications Software |
National Digital Library of India (NDLI) is a virtual repository of learning resources which is not just a repository with search/browse facilities but provides a host of services for the learner community. It is sponsored and mentored by Ministry of Education, Government of India, through its National Mission on Education through Information and Communication Technology (NMEICT). Filtered and federated searching is employed to facilitate focused searching so that learners can find the right resource with least effort and in minimum time. NDLI provides user group-specific services such as Examination Preparatory for School and College students and job aspirants. Services for Researchers and general learners are also provided. NDLI is designed to hold content of any language and provides interface support for 10 most widely used Indian languages. It is built to provide support for all academic levels including researchers and life-long learners, all disciplines, all popular forms of access devices and differently-abled learners. It is designed to enable people to learn and prepare from best practices from all over the world and to facilitate researchers to perform inter-linked exploration from multiple sources. It is developed, operated and maintained from Indian Institute of Technology Kharagpur.
Learn more about this project from here.
NDLI is a conglomeration of freely available or institutionally contributed or donated or publisher managed contents. Almost all these contents are hosted and accessed from respective sources. The responsibility for authenticity, relevance, completeness, accuracy, reliability and suitability of these contents rests with the respective organization and NDLI has no responsibility or liability for these. Every effort is made to keep the NDLI portal up and running smoothly unless there are some unavoidable technical issues.
Ministry of Education, through its National Mission on Education through Information and Communication Technology (NMEICT), has sponsored and funded the National Digital Library of India (NDLI) project.
| Sl. | Authority | Responsibilities | Communication Details |
|---|---|---|---|
| 1 | Ministry of Education (GoI), Department of Higher Education |
Sanctioning Authority | https://www.education.gov.in/ict-initiatives |
| 2 | Indian Institute of Technology Kharagpur | Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project | https://www.iitkgp.ac.in |
| 3 | National Digital Library of India Office, Indian Institute of Technology Kharagpur | The administrative and infrastructural headquarters of the project | Dr. B. Sutradhar bsutra@ndl.gov.in |
| 4 | Project PI / Joint PI | Principal Investigator and Joint Principal Investigators of the project |
Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon |
| 5 | Website/Portal (Helpdesk) | Queries regarding NDLI and its services | support@ndl.gov.in |
| 6 | Contents and Copyright Issues | Queries related to content curation and copyright issues | content@ndl.gov.in |
| 7 | National Digital Library of India Club (NDLI Club) | Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach | clubsupport@ndl.gov.in |
| 8 | Digital Preservation Centre (DPC) | Assistance with digitizing and archiving copyright-free printed books | dpc@ndl.gov.in |
| 9 | IDR Setup or Support | Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops | idr@ndl.gov.in |
|
Loading...
|