NDLI: End milling of stainless steel and titanium alloy in an oil mist environment

Content Provider	Springer Nature Link
Author	Okada, Masato Hosokawa, Akira Asakawa, Naoki Ueda, Takashi
Copyright Year	2014
Abstract	This paper discusses the utilization of the minimum quantity lubrication (MQL) method in end milling using a coated carbide tool for stainless steel and titanium alloy workpieces. The effects of MQL were mainly evaluated by tool flank temperature, cutting force, tool wear behavior, and surface roughness. In MQL cutting of stainless steel and titanium alloy at cutting speed v = 25 m/min, the tool flank temperature decreased by approximately 50 and 100 °C, respectively, in comparison with dry cutting. The effect of MQL on tool flank temperature was especially pronounced at low-cutting speeds. Conversely, the tool flank temperature in MQL cutting of titanium alloy was higher than that of dry cutting at v = 100 m/min or more. In high-speed cutting of titanium alloy, it was observed that several chips had adhered to the cutting edge of the rake face, which reached a high temperature due to the heat generated by cutting. In the cutting of titanium alloy, the tool flank temperature at both a higher feed rate and depth of cut was lower than that in high-speed cutting under conditions where the cutting efficiency was the same. Peeling of the coating film covering the tool in dry and air-blow cutting of stainless steel and titanium alloy was more pronounced than that in MQL cutting. The surface roughness was greatly improved by supplying an oil mist in low-speed cutting of stainless steel.
Starting Page	1255
Ending Page	1266
Page Count	12
File Format	PDF
ISSN	02683768
Journal	The International Journal of Advanced Manufacturing Technology
Volume Number	74
Issue Number	9-12
e-ISSN	14333015
Language	English
Publisher	Springer London
Publisher Date	2014-06-27
Publisher Place	London
Access Restriction	One Nation One Subscription (ONOS)
Subject Keyword	End milling Difficult-to-cut materials Minimum quantity lubrication Tool temperature Tool wear Industrial and Production Engineering Production/Logistics/Supply Chain Mechanical Engineering Computer-Aided Engineering (CAD, CAE) and Design
Content Type	Text
Resource Type	Article
Subject	Industrial and Manufacturing Engineering Control and Systems Engineering Mechanical Engineering Computer Science Applications Software

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

A study on process parameters in end milling of AISI-304 stainless steel under electrostatic minimum quantity lubrication conditions

Tool wear and tool life in end milling of 15–5 PH stainless steel under different cooling and lubrication conditions

Cutting performance of an indexable insert drill for difficult-to-cut materials under supplied oil mist

Friction, wear, and cutting tests on 022Cr17Ni12Mo2 stainless steel under minimum quantity lubrication conditions

Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V

An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy

Investigation of friction in end-milling of Ti-6Al-4V under different green cutting conditions

Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy

Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition

End milling of stainless steel and titanium alloy in an oil mist environment

Similar Documents

A study on process parameters in end milling of AISI-304 stainless steel under electrostatic minimum quantity lubrication conditions

Tool wear and tool life in end milling of 15–5 PH stainless steel under different cooling and lubrication conditions

Cutting performance of an indexable insert drill for difficult-to-cut materials under supplied oil mist

Friction, wear, and cutting tests on 022Cr17Ni12Mo2 stainless steel under minimum quantity lubrication conditions

Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V

An online optical system for inspecting tool condition in milling of H13 tool steel and IN 718 alloy

Investigation of friction in end-milling of Ti-6Al-4V under different green cutting conditions

Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy

Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition

End milling of stainless steel and titanium alloy in an oil mist environment