Loading...
Please wait, while we are loading the content...
Similar Documents
Epitaxial Lift-Off of Large-Area GaAs Thin-Film Multi-Junction Solar Cells
| Content Provider | Semantic Scholar |
|---|---|
| Author | Youtsey, Chris Adams, J. Chan, Ray Elarde, Victor C. Hillier, Gerald Osowski, Mark Mccallum, D. Miyamoto, H. Pan, Noren Stender, C. Tatavarti, Rao Tuminello, Francis Wibowo, Ayub Link, Micro |
| Copyright Year | 2011 |
| Abstract | MicroLink Devices is currently transitioning into production a wafer-scale, epitaxial lift-off process technology for GaAsand InP-based materials. This process enables the separation of thin, epitaxially-grown layers from the substrate on which they were deposited, and multiple reuses of the original substrate. Key advantages include cost reduction, weight reduction, improved thermal conductivity and high flexibility. INTRODUCTION Epitaxial lift-off (ELO) is a processing technique that enables thin epitaxial layers grown on GaAs or InP substrates to be “peeled off” from the host substrate. Although explored by many groups since the 1970s [1-3], ELO is finally transitioning to a viable manufacturing technology. The ELO process offers several important advantages for both performance enhancement and cost reduction of III-V electronic and optoelectronic devices. The epitaxial films can be transferred to new support substrates that are thin, flexible, lightweight, and with higher thermal conductivity than the original growth substrate. The GaAs or InP substrate can be reused many times. At MicroLink Devices we have developed an industry-first ELO process capable of lifting off large areas of semiconductor material from substrates up to 6 inches in diameter without any degradation of material quality or performance characteristics [4-6]. An example of a 4-inch GaAs foil with large-area solar cells is shown in Figure 1. We are actively pursuing the commercialization of this technology for fabricating thin, flexible large-area multi-junction solar cells with very high efficiency. Potential applications include electric-powered, unmanned aerial vehicles (UAVs), space satellites, and terrestrial solar concentrator systems. EXPERIMENTAL All epitaxial structures were grown by metallorganic chemical vapor deposition (MOCVD) at 100 mbar using arsine (AsH3), phosphine (PH3), trimethylindium (TMI), trimethylgallium (TMG) as precursors and using a V/III ratio >50. Inverted metamorphic multijunction (IMM) InGaP/GaAs/InGaAs structures were grown on GaAs substrates. Figure 2 and 3 show schematics that outline the basic ELO process. The first layer deposited on the substrate is a thin, AlAs release layer (~5 nm). The solar cell epitaxial layers are then deposited, followed by application of a thick (1-2 mil) flexible metal carrier layer. The wafer is then immersed in a concentrated HF-acid chemistry, which selectively dissolves the release layer (the etch selectivity relative to the GaAs epitaxial structure is greater than 1E5). The thin, composite structure consisting of the metal carrier Figure 1: 4-inch GaAs ELO foil attached to a thin and flexible metal backing. The wafer contains two large-area (20-cm) solar cells. Substrate Flexible Carrier |
| File Format | PDF HTM / HTML |
| Alternate Webpage(s) | https://www.csmantech.org/OldSite/Digests/2012/abstracts/96R-Epitaxial%20Lift%20Off%20of%20Large%20Area%20GaAs%20Thin%20Film%20Multijunction%20Solar%20Cells.pdf |
| Alternate Webpage(s) | http://csmantech.pairserver.com/newsite/gaasmantech/Digests/2012/papers/6a.4.033.pdf |
| Language | English |
| Access Restriction | Open |
| Content Type | Text |
| Resource Type | Article |
