Annealing optimization in the process of making membrane PSF19%DMFEVA2 for wastewater treatment of palm oil mill effluent

Content Provider	Scilit
Author	Mustafa Said, A. A.
Copyright Year	2018
Description	Journal: Iop Conference Series: Materials Science and Engineering A small proportion of the Palm Oil Mill Effluent (POME) treatment has used its wastewater to converted to methane gas which will then be converted again into electrical energy. However, for Palm Oil Mill whose has a value of Chemical Oxygen Demand in its wastewater is less than 60.000 mg / L this can't so that the purpose wastewater treatment only to reach the standard that can be safe to dispose into the environment. Wastewater treatment systems that are general applied by Palm Oil Mill especially in North Sumatera are aerobic and anaerobic, this method takes a relatively long time due to very dependent on microbial activity. An alternative method for wastewater treatment offered is membrane technology because the process is much more effective, the time is relatively short, and expected to give more optimal result. The optimum membrane obtained is PSF19%DMFEVA2T75 membrane,while the parameter condition of the permeate analysis produced in the treatment of POME wastewater with membrane PSF19%DMFEVA2T75 obtained at pH = 7.0; TSS = 148 mg / L; BOD = 149 mg / L; And COD = 252 mg / L. The results obtained is accordance with the standard of the quality of POME.
Related Links	http://iopscience.iop.org/article/10.1088/1757-899X/309/1/012122/pdf
ISSN	17578981
e-ISSN	1757899X
DOI	10.1088/1757-899x/309/1/012122
Journal	Iop Conference Series: Materials Science and Engineering
Issue Number	1
Volume Number	309
Language	English
Publisher	IOP Publishing
Publisher Date	2018-02-01
Access Restriction	Open
Subject Keyword	Journal: Iop Conference Series: Materials Science and Engineering Water Science and Technology Palm Oil Wastewater Treatment
Content Type	Text
Resource Type	Article