Loading...
Please wait, while we are loading the content...
Internal Coating of Ureteral Stents with Chemical Vapor Deposition of Parylene
| Content Provider | MDPI |
|---|---|
| Author | Sara, Bröskamp Franz, Gerhard Jocham, Dieter |
| Copyright Year | 2021 |
| Description | Ureteral balloon catheters and ureteral stents are implanted in large quantities on a daily basis. They are the suspected cause for about a quarter of all the nosocomial infections, which lead to approx. 20,000 deaths in Germany alone. To fight these infections, catheters should be made antibacterial. A technique for an antibacterial coating of catheters exhibiting an aspect ratio of up to 200 consists of a thin silver layer, which is deposited out of an aqueous solution, which is followed by a second step: chemical vapor deposition (CVD) of an organic polymeric film, which moderates the release rate of silver ions. The main concern of the second step is the longitudinal evenness of the film. For tubes with one opening as balloon catheters, this issue can be solved by applying a descendent temperature gradient from the opening to the end of the catheter. An alternative procedure can be applied to commercially available ureteral stents, which exhibit small drainage openings in their middle. The same CVD as before leads to a longitudinal homogeneity of about |
| Starting Page | 739 |
| e-ISSN | 20796412 |
| DOI | 10.3390/coatings11060739 |
| Journal | Coatings |
| Issue Number | 6 |
| Volume Number | 11 |
| Language | English |
| Publisher | MDPI |
| Publisher Date | 2021-06-21 |
| Access Restriction | Open |
| Subject Keyword | Coatings Plasma-enhanced Chemical Vapor Deposition Xylylene Parylene Ureteral Stent Viscous Flow |
| Content Type | Text |
| Resource Type | Article |
