NDLI: Analysis of mechanical and electrical noise interfacing the instrument during data acquisition: development of a machine for assessing surface properties of fibers

Please wait, while we are loading the content...

1999 IEEE Annual Textile, Fiber and Film Industry Technical Conference (Cat. No.99CH37006)

1999 IEEE Annual Textile, Fiber and Film Industry Technical Conference (Cat. No.99CH37006)

Testing electrical power systems for safety and reliability

A simplified approach to reliable high quality critical grade power

Parallel active harmonic filters: the electronic solution for harmonics and power factor correction

Power Quality Initiative: polymers processing

Selection of power cables for PWM AC adjustable-speed drives

Soft start vs AC drives-understand the differences

Analysis of mechanical and electrical noise interfacing the instrument during data acquisition: development of a machine for assessing surface properties of fibers

Online measurement of fabric mechanical properties: compressional behavior

An integrated approach to machine fault diagnosis

Power monitoring

1998 IEEE Annual Textile, Fiber and Film Industry Technical Conference (Cat. No.98CH36246)

1997 IEEE Annual Textile, Fiber and Film Industry Technical Conference

1996 IEEE Annual Textile, Fiber and Film Industry Technical Conference

1995 IEEE Annual Textile, Fiber and Film Industry Technical Conference

Proceedings of 1994 IEEE/IAS Annual Textile, Fiber and Film Industry Technical Conference

[Proceedings] IEEE 1993 Annual Textile, Fiber and Film Industry Technical Conference

[Proceedings] IEEE 1992 Annual Textile, Fiber and Film Industry Technical Conference

[Proceedings] IEEE 1991 Annual Textile, Fiber and Film Industry Technical Conference

Annual IEEE Conference on Textile, Fiber and Film Industry

Analysis of mechanical and electrical noise interfacing the instrument during data acquisition: development of a machine for assessing surface properties of fibers

Content Provider	IEEE Xplore Digital Library
Author	Yuksekkaya, M.E. Oxenham, W.
Copyright Year	1999
Description	Author affiliation: Coll. of Textiles, North Carolina State Univ., Raleigh, NC, USA (Yuksekkaya, M.E.)
Abstract	A new compression test unit was developed for the assessment of the surface properties of fibers. In order to measure the variation in the compression force during a test, a full bridge load cell was developed. It was seen that the signal coming from the strain gages was superimposed with noise. It was also found that the noise was from both electrical and mechanical sources. An extensive mathematical analysis of mechanical noise and the application of a mechanical noise reduction technique minimized the mechanical noise component. Analysis of electrical noise showed that the motion control card was interfacing with the data acquisition (DAQ) card via both the RS232 and the AC power line. It was necessary to separate the motion control unit and the DAQ unit in order to eliminate the electrical noise problem present in the system. After eliminating the noise from the unit, the calibration of the strain gages has been performed. The coefficient of correlation was found 1.00 with a cubic model.
File Size	849287
File Format	PDF
ISBN	0780356217
ISSN	10493328
DOI	10.1109/TEXCON.1999.766184
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	1999-05-04
Publisher Place	USA
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Instruments Data acquisition Force measurement Optical fiber testing Capacitive sensors Motion control Noise reduction Cotton Engine cylinders Strain measurement
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in