NDLI: Design and realization of cone beam CT 3D image reconstruction based on FPGA

Please wait, while we are loading the content...

2011 International Conference on Electric Information and Control Engineering

Organizing committees

Table of content

Hardware-in-loop simulation of a common rail turbocharged diesel engine ECU

Research of semi-active suspension self-adjust sky/ground-hook hybrid control simulation

Optimal crash analysis of vehicle based on DOE

The effect of injector position on the performance of a homogeneous direct injection gasoline engine

Challenges facing the low temperature diesel combustion boosting system

The simulation analysis of the steering stability of vehicle on the road-bridge connection area

Theoretical Research of gas forces on the scroll compressor with unit combined profile for automobile

Optimal design of micro flexible gripper

Optimization design of new automobile hub bearing

The Research of the optimization of geographical location estimating scheme of the Vehicle Collision Accident Self-alarm System

Field weakening control of PMSM used in an electric power steering system

Numerical simulation of direct injection gasoline engine model

The influence of lean combustion and EGR on combustion and emissions of gasoline engine

A potential energy regenerating system fueled by the gravitation

Design and optimization of the chassis for ∜4WIS and steer-by-wire electric car∝

Control strategy & calibration of fuel injection impulse width on EFI motorcycle engine

Study on the effect of straw ethanol residue on SBS waterproofing membrane properties

Modeling and simulation of public EV charging station with power storage system

Dynamic tire model used in advanced chassis control

Implementation of solar illumination system with three-stage charging and dimming control function

Expansion of digital holography measurement area in particle field

Application of reverse technique to the design for intake port of diesel engine

Lightweight design of all-terrain vehicle's frame

Modeling and experiment of vehicle double-tube hydraulic shock absorber

Structural performance analysis and optimization of a mini-electric vehicle frame

Thermal balance test of LNG engine at different coolant temperatures

Strength analysis and structural parameters optimization of the boom system of the truck-mounted concrete pump

Experiment on the removal of NOx in diesel engine exhaust with non-thermal plasma assisted catalyst

Design and experiment research on the mud turbine generator for mine

Research on fluidization characteristics of mixture of slender particles and inert materials in a fluidized bed

Research on the double trailing arm suspension of EV direct wheel drive system

Handling stability simulation analysis of Electric Power Steering (EPS) system based on ADAMS

Study on a new type of ignition system for automotive natural gas engine

Notice of RetractionThe ameliorative design of diesel engine connecting rod assembly using FEM

Transmission system performance analysis of traditional power vehicle

Study on tire-ground mechanical-characters of TBR tires

The study of the effect of carbon composition of bio-diesel fuels in a diesel engine

A research of turbocharged gasoline transient response

Study on computer aided analysis and reconstruction system for traffic accidents

Experimental study on stratified lean-burn of non-road small SI engine with supplemental side air-injection

A bidirectional equalization and management system applied on EV

One-way traffic design in small region network based on the link traffic volume for estimating OD matrix

Optimization analysis of 8L250 diesel engine crankshaft structure

Optimization of Co-driver restraint system in frontal crash

Electric energy management system based on PLC

Intelligent control study of engine air-fuel ratio co-simulation based on information fusion

Research on enhanced heat transfer characteristics in heat exchanger inserted with rotors

Energy system design and economic analysis on low-carbon experimental zones

The study on the effect of bioethanol to the diesel engine performance

Advanced gasoline engine misfire diagnostic method based on crankshaft speed multiple filtering

Modeling of FCV powertrain using a combined forward/backward approach

Test and design of controller for pinion-type EPS with brushless DC motor

The research and development for the EFI of DY125 motorcycle

An investigation on the relationship between engine knock and amplitude characteristics of spark plug's ionic current signals

Performance experiment on a new type of electromagnetic injector fuelled with dimethyl ether

Development of a modular master-slave instrument cluster

Research on Steer-by-wire principle and the realization of Steer-by-wire system

Design of automotive gateway based on FlexRay

The simulation analysis of the effect of occupant position on neck injure in a low speed rear-end crash of coach

Vehicle modeling based on suspension K&C combined constraint

Development of ECU calibration system for electronic controlled engine based on LabVIEW

Transplantation of RTOS uC/OS-II on TriCore processor

Vehicle-mounted waste heat recycling Stirling engine feasibility study and initiatory design

Urea-SCR catalyst research and exhaust pipe layout optimization

Modal stimulation analysis for acoustic-structure coupling system of the aluminum alloy metro vehicle cavity

Effect of inlet turbulence parameters on numerical simulation of Ahmed car body

The research of effects of suspension bushing stiffness on vehicle yaw response performance

Indirect Rotor-Field-Oriented Control for Single Phase Induction Motor drive based on dSPACE

Experimental study on vibration and noise of pure electric vehicle (PEV) drive system

A simulation study on the effects of chamber geometry on combustion and emission in a diesel engine

Study on combustion and NOx emission characteristics of a DI diesel engine operating on pistache seed biodiesel/diesel and methanol/diesel blends

Analysis of impact factors of fuel-gas mixing performance for gasoline direct injection engine

Direct torque control of permanent magnet synchronous machine based on vector subdivision in electric vehicle

Application of multi-variable grey model in the integrated control of vehicle SAS and EPS

Analysis and assessment of the seat geometry comfort for public passenger vehicles

A method to reduce engine intake noise based on numerical simulation

The studies on the methane production with solid state fermentation by mixed the rice straw and swine manures

MPC algorithm implementation and its offline experiments in ASCET-MD

Analog computation and experimental study of small gasoline engine

Front wing design of formula SAE racing car based on CFD

Simulation of the impact of seats on interior noise field in passenger compartment cavity

Experimental study of the effects of Ethanol on small EFI engine pollutant emissions

Parameter identification and test study of vane damp for tracked vehicle

Research on control method of induction motor for fuel cell hybrid vehicles

Study on Urea-SCR system basing on Pre-oxidation

Experiment and simulation study on cold start of automotive PEMFC

Energy efficiency of a Ni-MH battery used in hybrid electric vehicles

The method of parameter design for the powertrain system of city hybrid electric public bus based on SRM

Optimal research on intake initial condition of high density-low temperature diesel combustion based on multiple index

Heat analysis of asphalt concrete pavement based on snow melting

Study on assistance torque control strategy of Electric Power Steering System

Applications of porous sic ceramics in automobile exhaust purification field

Effect of Al2O3 additive on formation of PM2.5 in O2/CO2 atmosphere during coal combustion

Dynamic response characteristic analysis of vehicle frame based on virtual simulation technology

Analysis of heat release rate of a diesel engine using Jatropha curcas oil as fuel

Simulation study on injection characteristics of a new type of DME injector

Study on optimizing control for piston wind of subway station without screen door

Three-dimensional numerical simulation analysis on the combustion and emission characteristics of small non-road Diesel Engine fueled with bio-diesel

Research of abnormal vibration for locomotive console

Simulation analysis of supercapacitors' electrical characteristics of hybrid used on harbour crane

Research on the human machine interface in Control-by-Wire electric vehicles based on human characteristics

The design and calculate of hydraulic shift system of ZL50 loader

Configuration and thermal gravimetric analysis of diesel Particulate Matter after plasma

Numerical simulation of two-phase air/oil flow characteristic in bearing chamber

A research on fluid-solid-heat coupling simulation for diesel engines with considering boiling heat transfer

The analysis & design of a novel electric wheel drive system with reducer for non-steering wheel

Research on hardware-in-the-loop simulation for hybrid powertrain

Simulation and emission experiment of Changan hybrid electric vehicle(HEV) under the Instable drive cycle conditions

Influence of burner rim configuration on polyhedral flames

The effects of different rear slant angles and ride heights on aerodynamic lift force

Effect of charge time on secondary voltage and current signal for CNG engine

Modal analysis of the cylinder block of 4D25G diesel engine

Optimization design of the dual-steering control system for all-wheel independent electric drive vehicle

Study on adaptive fuzzy PID control of electro-hydraulic power steering system of automobile

Numerical simulation of low temperature oxygen-enriched combustion of diesel engine with the CFD & n-heptane sample model's coupling

Analysis of traditional revolute pair and the design of a new compliant joint

Experimental research on the flame temperature of biodiesel fuel combustion in open-air conditions

Underhood thermal analysis and improvement of a bus with rear engine compartment

The calculation method and experimental study on acoustic characteristics of micro-perforated panel absorbers with linear-change cavity

Analysis of voltage source inverter losses model

The impact of oxygen sensor degradation on air-fuel ratio and emissions

A study on pluggable fuel cell range extender

The scalar control research based on fuzzy PID of BDFM stand-alone power generation system

Optimal lumbar support prediction using intereface pressure

Characteristic study on biomass derived flyash

Effect of altitude height on surface- radiated noise from diesel engines

Status, problems and countermeasures of energy development in Yunnan province

Hardware-in-the-loop simulation for multi-energy management controller of Hybrid Electric Vehicle in a virtual car environment

The friction analysis of main bearing on an internal combustion engine based on multi-body dynamics and elasto-hydrodynamic

Notice of RetractionStudy of nonlinear isolator dynamic and static characteristics

Small sealed housing equipments for detecting evaporation emission of gasoline automobile

Numerical research on lift force of the vehicle

A study of engine fuel economy and its optimization method in hybrid electric vehicles based on MATLAB toolbox

Analysis of mid-frequency vehicle structure noise with FE-SEA hybrid method

Finite element analysis of body framework for large size bus

The effect of wind shear and pitch control delaying on wind turbine blade loading

A method on pre-matching of engine with turbocharger and their applications

The study on particulate emissions of engine fuelled with biodiesel-diesel blends

Notice of RetractionThe parametric modeling of modified spur gear and automatic generation of the related gear parameters

Dynamic analysis of rotor system for magnetic levitation high-speed electrical machine

Design and test of round-leaf convertible driving wheel

Finite element analysis of tire thermomechanical coupling rolling resistance

BF4M2012 engine development based on POC after-treatment for China stage IV regulation

Investigation of fluid-solid conjugate heat transfers for a sedan exhaust system

A compact fuel processor integrated with 75kw PEM Fuel Cells

The study on formation process of PAHs under different combustion conditions

Optimal design of hollow cylinder type force transducer with ultra low height

Study on effect of fuel switch process on transient emissions for LPG engine

The study on formaldehyde emissions of biodiesel in the HCCI combustion mode

Effect of fuel injector's parameters on HSDI diesel engine's performance

The study of automobile chassis design and development based on Digital Mock-Up

Experimental study on velocity characteristic of engine fueled with petroleum coke slurry

Experimental investigation on biomass combustion in a pilot-scale circulating fluidized bed combustor

Research on numerical method of air flow around the high-speed train under crosswind using blocking structured mesh

Marine diesel NOx emission reduction study

Simulation of fuzzy control strategy for parallel hybrid electric vehicle

Design of high charging power supply for Electric Vehicle based on BUCK circuit

Numerical simulation on the influence of solar incidence angle on the car internal flow field

Experiments on mechanism of biomass ash slagging

Simulation study on control strategy for a hybrid electric vehicle with battery and ultracapacitor

Numerical simulation of the effects of combustion chamber geometry on nonroad diesel engine performance

Development of a new palm oil monoester used as a clean alternative diesel engine fuel

The design of FlexRay/CAN/LIN protocol analyzer

The impact analysis of the accuracy of driving cycle based on divisions of running statuses

Simulation of car driving based on SolidWorks and Simulink

A study of maximum power operation for engine in continuously variable transmission powertrain

Experimental research for simulating Motorcycle ‘Emission Test Mode’ on the Engine Dynamic Test Bed

Efficiency-optimization control of induction motor drives

Numerical simulation of stratified lean burn for LPG engine

Effect of engine speed and load on NTP purifying diesel engine emissions

Transient CFD simulation of gasoline intake characteristics

Aerodynamic analysis method of heavy-duty commercial vehicle based on CFD

The design of vehicle twist beam rear axle based on structure topology optimization

Model of pressure drop and filtration efficiency in clean DPF

Design of drive circuit for GDI injector

Short-term wind power prediction with signal decomposition

Survey of residential air-conditioning-unit usage behavior under south China climatic conditions

Study of critical vibration in a hybrid turbocharging system about vehicle engine

Computational analysis for the synchronizing time of the microcar transmission

A study on control of lockup clutch of hybrid vehicle's torque converter

The research on optimized harmonic proportion of diesel and biodiesel for diesel engine

The comparison between basic ORC and superheat ORC system in engine waste heat recovery

Research on method of Powertrain system matching for pure electric passenger car

Velocity measurement of microchannel flow with micro-PIV using optical flow estimation

Experimental studies on pressure drop performance and regeneration safety of diesel particulate filter

Power distribution and system design of parallel hybrid electric vehicle powertrain

Influences of oil viscous-temperature property on transfer property of hydroviscous dynamometer

Study on control strategy for starting stage of mechanical automatic clutch

Numerical simulation of welding deformation for the box welded structure of railway vehicle

Study on dynamic response of buffer hybrid structures

TGA-FTIR investigation of the chemical looping combustion by coal with a CuO-Fe2O3 combined oxygen carrier

CFD simulation calculation of inlet manifold modification design

Utilization of renewable energy extracted from reservoirs in air conditioning system: Case study

The methods of power spectrum estimation based on measured pavement

Experimental research of the performance of a scroll compressor with novel unit combined profile for automobile at variable speed

Casing corrosion prediction based on grey support vector machine

Research on characteristics of intake flow under supercharging condition in diesel engine

Numerical research on the airflow field inside the highway sleeper coach under manned condition

Optimization of road noise barrier based on finite length of traffic flow

Optimal design of characteristic wind speed for small horizontal axis wind turbine and experimental research

Research about the arrangement of the lifted suspension under the minimum turning radius of tractors

Study for monitoring Three-Way Catalyst Converter efficiency based on BP ANN and exotherm

The influence of fuel supply angle on the combustion and emissions of methanol/diesel engine

The study of dual fuel system applied to EFI engines

Modeling and testing of low-speed electric vehicle

Study on thermal management for the engine compartment of a rear engine bus based on STAR-CCM+

Air flow simulation in high-pressure air blower with splitter blade

Design for automobiles magneto-rheological damper and research on polynomial model

The effect of methanol gasoline to engine oil

Optimization design of construction machinery based on ansys

Simulation investigation on coupled heat transfer of cylinder of high-altitude air-cooled engine

Simulation research on synthesis anti-vibration of motorcycle engine

Simulation for the propeller loading of marine electrical propulsion based on matlab

Simulation DPF with different characteristics channels

Research on shift decision-making of AMT for heavy commercial vehicle

Research on cross-country road spectrum modeling technology based on wavelet method

Effect of turbocharging system on the performance of a Gasoline Engine

Pollutant emissions of semi-dried sewage sludge combustion in a 1MW circulating fluidized bed combustor

Numerical modeling study of combustion with methyl decanote as a surrogate for biodiesel

Influence of practical complications on energy efficiency of the vehicle's lithium-ion batteries

Modeling and simulation of vehicle equipment ride performance on off-road spectrum

Research on energy efficiency of the vehicle's battery pack

Modeling of heavy metals behavior based on fly ash from MSWI in a swirling furnace

Experiment on the removal of soot emissions from diesel engine with non-thermal plasma assisted catalyst technology

Material balance method for calculating the reserves of unsaturated coal-bed methane reservoirs

Modelling and dynamic simulation of braking stability in asymmetry chassis

Research on numerical method of air flow around the high-speed train under crosswind using tetrahedron unstructured mesh

Lateral stability analysis of the tractor/full trailer combination vehicle

Prediction on pure electric vehicle technology maturity in China based on TRIZ theory

Application of PID control in hydraulic system of tensioning device

Optimization design of the Micro-vehicle's shaft stiffness based on ADAMS

The analysis of speed governor's performance and design of fuel corrector of single cylinder diesel engine for mobile using

Analysis and optimization on dynamic characteristics of hydraulic system of CVT

An improved method for compensating of harmonics of voltage-source with parallel active power filter

The research of car automatically no level speed variator based on no level speed variator of engage in double planetary-gear

Research on simulation and experiment of fast response frequency control valve in Hydraulic free piston engine

A monitor system based on virtual instrument for fuel cell commuter

Study on control strategy of braking energy regeneration of hydrostatic energy reserving transmission

Steady-state temperature measurement of the piston using voltage memory

The independent steer-by-wire system of the omni-directional EV and its Fault-Response-System

Economic feasibility analysis of the new energy vehicles promoted in Wuhan city

Design and strength analysis of cylinder head for free-piston engine

Root cause analysis and remedial renovation of one 350MW boiler made by Mitsubishi

A study on the prospect of engine exhaust gas energy recovery

A method to detect the rotational speed and direction with one sensor

The status and development trend of hydraulic hybrid vehicle

Rotor-bearing dynamic research on an E-type gas turbine-generator set

Study of exhaust particle size distribution of oxygenated fuels running with diesel engine

Modal analysis of drive axle based on OMA time domain method identification

An optimal design for suspension based on LQG control

Lateral stability analysis of the tractor-semitrailer vehicle in severe situations

Experimental study on performance of turbocharged diesel engine at high altitude

Wind power prediction using time-series analysis base on rough sets

Pylon course slalom test and simulation of the hydraulic power steering system vehicle

Study of integrative performance test system for the automobile engine control unit

On the algorithms of design optimization of crankshaft bearing based on multi-objective of system

Simulation study on flow characteristics of gas-liquid in scrubbing-cooling chamber of coal-water-slurry entrained-flow gasifier

Optimum design of mosaic-type combinable flatbed vehicle's steering mechanism based on ADAMS

Experiment research on NVH performance of block-head assembly parts of engine

EPS control based on state feedback

The efficiency improvement of motorcycle engine running with reformulated hydrogen rich gas driven by exhaust energy

Dynamic analysis for slider-crank mechanism of engine at the presence of nonlinear friction

Fault diagnosis of roller bearing using feedback EMD and decision tree

Simulation of exhaust manifold catalytic converter based on STAR-CCM +

Necessity and reliability of pre-monitoring network for energy pipeline

Effects of gas diffusion layer characteristic on the water-protect performance of low-humidity PEMFC

Study on the material removal control process of abrasive water jet

The analysis of response characteristic of the Phase-adjuster for the D20VVT engine

Suspension dynamics simulation based on simulink

The CVT test design on a tester

Closed-loop control strategy of NH3-SCR for diesel engines

The integrated control of regenerative braking system and air braking ABS on electric wheel drive urban bus

Studying the effect of diesel fuel properties on emissions from engines with the fuzzy regression method

Study on the combustion characteristics of low calorific value gas in the Constant Volume Combustion Bomb

Research on valve cam molded-lines of deformed hyperbolic function for high-speed Internal Combustion Engines

Research of parameter design and matching of powertrain system in plug-in hybrid electric vehicle

Reliability analysis on electrode plates driving mechanism in water resistance test for high speed diesel locomotive

Optimum design of lifting mechanism in dump truck

The spray visual system of GDI injector

Research and development of hydrogen energy materials

Optimized design of construction parameters of high pressure gravel packing

Application of non-prior base analysis in diagnosing the boundary loose of cantilever beam

Hydraulic system design for full hybrid transmission

Natural ventilation potential analysis of rural residential buildings in China

Simulation for series-parallel hybrid electric vehicle powertrain system

Research on energy efficiency of natatorium in Shanghai Maritime University

Study on vehicle-mounted snow-remover & deicer for trees based on TRIZ

Mg-substituted olivine LiFePO4 for secondary lithium ion batteries

Emissions characteristics of diesel car fueled with biodiesel blends

A rapid design method for high speed aeronautic switched reluctance generator

Design and Finite element analysis of a new type mechanical brakes of vehicle driven by wheel motor

Optimization on performance of a turbocharged MPI gasoline engine by working process simulation based on target control method

Analysis of active noise control method's effect on automobile cabin noise loudness improvement

Experimental research of fuel consumption and exhaust emissions of diesel engines fueled with diesohol

Study on getting high gas energy yield by biomass catalytic cracking

The matching and integration in the technology of diesel Particulate filter

Novel converter of Wind Power Generation System of Non-Grid-Connection for Radio Base Station

Development of the energy management strategy for a ZAFC and Li-ion duel batteries module

Development and application of heat recovery system in architecture technology

Research on the driving system of Hybrid Electric Motorcycle

Research on arsenic removal with heterosexual electrode heterogeneous materials in water

Numerical simulation on effects of nozzle hole cone angle on combustion and emissions in a diesel engine

Application of CAD / CFD technology in vehicle engine cooling fan

Spray characteristics of ethanol-gasoline blends from an asymmetric multi-hole injector of DISI engines

Research on algorithm of GPS/DR integrated vehicle navigation system

Calculation of equivalent thermal conductivity of Gasar porous materials

An experimental study of automobile interior aerodynamic noise

The dense signal identification based on inner product and iteration

Development of a single-mode full hybrid system

Electronic stability control for direct-drive Electric Vehicle

Flow simulation in steering rotary valve

Based on ADAMS of the analysis of vibration and noise testing of micro-vehicle rear axle

Design and dynamic simulation on adjustable stiffness hydro-pneumatic suspension vibration characters of tracked vehicle

Study on virtual assembly technology of All-Terrain Vehicle

Analysis on safety structure of automobiles for protecting passengers from possible head injury during frontal collision

Stydy of linear eclectric powered steering system

Research on the interaction relationship between common rail diesel engine injection parameters based on neural network

Investigation on the combustion cyclic variability in a non-road diesel engine fuelled with diesel/bio-diesel blends

Research of pressure limiting valve in the ESP under control of high-frequency PWM

The design of intelligence vehicle's heterogeneous interconnection platform

Modeling and simulation of hydraulic power steering system

Experiment study on spray structure of a multi-hole GDI injector

New chaos robust controller and its application

Research and development of intelligent design system for the overall layout design of bus body

Analysis on speed characteristics of a rubber V-Belt CVT

Design and test of single cell for zinc-air fuel cell module of electric vehicle

Research progress of fast filling of high pressure hydrogen for fuel cell vehicles

Technologies of emissions control for NOx and PM on diesel engine

EREV driveline thermal management system design

AMT research based on the electric drive system

Simulation of the aerodynamic interaction of two generic sedans moving very closely

Puncture vehicle of direction instability dynamic modeling and simulation

A data analysis system based on MATLAB GUI for portable emission measurement

3-D numerical simulation and computation for transient temperature field of drum brake

Design and implementation of vehicle monitoring and early-warning system based on WinCE

A study of grey theory used in prediction of annual wind power generation

TRIAC dimming electronic ballast for compact fluorescent lamps

The burning of diesel fuel in the DOC of the particulate filtering system of diesel engine during the regeneration process

Statically indeterminate optimization analysis of steering column load of EPS

The research for the application of automobile exhaust valve alternative materials

Control strategy optimization for hybrid electric vehicle based on particle swarm and simulated annealing algorithm

Design and analysis of a vertically taking off and landing amphibian vehicle with duct fan

Powertrain design of ultra-capacitor serial hybrid electric transit bus

Development of hybrid city bus's driving cycle

Stiffness-based method for improving pedestrian leg protection performance of vehicle front-end

Flame stabilization in a planar micro-combustor with a bluff body

Notice of RetractionTemperature field change analysis of brake drums based on ANSYS

Heat transfer and frictional characteristics of rifled tube in a 1000MW supercritical lignite-fired boiler

Co-simulation analysis of zero radius steering characteristics of articulated vehicle with six motor-driven wheels

A study on performance and soot emission of a high-speed diesel engine fueled with butanol-diesel blends

Study on emulsification technology of diesel-ethanol based on functional group and emulsifying process

The analysis of a abruption and key factors on precipitation and Natural runoff in Hai River Basin

Simulation and grey relational analysis of continuous regeneration “balance point” of diesel particulate filters

Influence of objective function on parameter identification result

Notice of RetractionVehicle collision injury severity analysis based on multi-information fusion

Development of the “sandwich” guardrail based on crash simulation and test

The modeling research on brushless doubly-fed generator under no-load condition for wind power generation system

Study on the dispersion of clutch diaphragm spring performance indexes

Analysis of vibration characteristics of e-CVT powertrain

The analysis of gas well producing water and liquid loading

Simulation of active control of engine exhaust noise by variable step tracking

Modeling and simulation of the guide rod tandem suspension model

Gasoline engine valve-train mechanism simulation

The optimal installed direction and angle of Solar Collector

Study of starting and accelerating control strategy for hydraulic hybrid vehicle

Power system study of engine waste heat recovery based on single screw expander

Design of the damping seat based on parallel mechanisms

Development on automobile fuel consumption intelligent and rapid testing system

Control strategy for parallel hybrid system based on the electric drive mechanical transmission

Carbon emission estimation of a chemical tanker in the life cycle

Energy balance analysis of diesel engine

Performance analysis of rotary Stirling engine

Small wind turbine blade design and finite element analysis

Structural optimization of two-stage thermoelectric generator for wide temperature range application

Designs and evaluations of emergency millimeter wave communication system for flood control

Application study on bank's CRM based on data mining technology

Aggregate homotopy method for semi-supervised SVMs

EVM simulation of power amplifiers with designed signals in OFDM systems

Advanced sensor gateway based on FPGA for wireless multimedia sensor networks

High-speed machining auto panel dies database system based on CBR

A 0.18um CMOS Reconfigurable Multi-band Multi-gain Low Noise Amplifier

A 900MHz high efficiency and linearity adaptive CMOS power amplifier

Detection performance with improved principal component analysis for MIMO radar

Equalizing the TWTA's nonlinear gain with the resistor loaded resonators

A Node-Disjoin Multipath routing in Mobile Ad Hoc Networks

Research of credibility evaluation model of relay nodes in anonymous communication

The flow velocity measurement with spatial filter principle based on the plug-in electrostatic sensor

Risk value judgement of the disaster factors on grey relational analysis

Analysis and design for a kind of comb-shaped slot RFID tag antenna

Research of image retrieval based on color and shape features

Design of VGA display controller based on FPGA and VHDL

Amended EOQ model and its utilization for limited space warehouse

A weighted relative entropy method for forecasting demand

Improved rate control scheme in H.264 for real-time communication

Research on the algorithm of energy-aware time synchronization for Wireless Sensor Networks

Application of discrete tracking differentiator to electronic control system of diesel engine

Experimental and application of spiral distributed optical fiber sensors based on OTDR

Wavelet analysis on prestressed duct grouting condition detection with ultrasonic method

Approximate controllability of neutral stochastic evolution differential systems with poisson jump

PLC-based SCADA system for oil storage and application

Research on Chinese fertilizer export tariff policy adjustment

Research on integration platform of cutter digital design

Research on information sharing platform for seamless supervising of food safety

Stack assembly technology research

Convergence analysis for modified conjugate gradient in electromagnetic tomography

Research of intersecting line modeling method based on space analysis

Design of a new explosion-proof intelligent monitoring & control system for electric valve

The study on the efficiency increase to the light-concentrating panels

Hu-Meyer formula in stochastic control systems driven by fBm

Principle and application of inorganic Electroluminescence and organic Electroluminescence

A new method of pulse compression for meteorological radar

Analysis of tilting torque of steel ladle based on ANSYS

Research of one-wire bus distributed system based on token technology

Fault diagnosis of gear cases based on entropy of singular values and support vector machine

Building synthetic Instrument conforming LXI C class standard based on GoAhead

Design and implementing of target sound orientation system based on multichannel sound card

Research of high power-density permanent magnet synchronous motor and driving system

Failure diagnosis system of continuous miner cutting system based on hybrid optimization neural network

Research on in power smart sensor base on LSM

Design of high accuracy orientation sensor of MWD

Research and limitation of system call based on Linux platform

Fault diagnosis of power grid with information fusion of multi-level

Fabrication of polymer solar cells by magnetic field disposal

A Scheme of the simulation and design of aspheric lensed fiber applying VB and MATLAB

ID-based Proxy blind signature scheme with unlinkability

Weak target detection based on fractional spectral subtraction in sea clutter

Study on application of three different control charts in measurement system stability

Research on games theory-based procurement strategy selection for forging enterprise

Monthly discharge prediction with 2D cloud model in non-dry season

Mine water inflow monitoring system based on novel synthesis conversion method

Simulation and implementation of Costas loop based on FPGA

Numerical research on bifurcation and chaos in Duffing system

The using of CH452 in embedded systems

Research on algorithms of land-to-air missile launch control system based on CAN bus

Study of input-output stability rule of elastic motion of flexible manipulator arm

A stable nonconforming finite element method for Darcy-Stokes flow

Transparent encryption based on network file system filtering driver

Windows-based long-range ordering system

Projective synchronization of a class of delayed chaotic systems on networks

Actuator fault diagnosis based on observer of singular systems

Extracting solar cell model parameters based on chaos particle swarm algorithm

Optimal design of Voltage-controlled Voltage Source second-order unit gain Butterworth low-pass filter

A bi-directional short stroke permanent magnet linear DC Motor

The collection system design of pulse information based on the USB technology

Method for modeling and analysis real-time system dependability using AADL

Notice of RetractionThe aircraft autopilot design of parameters changing in a wide range

The development of manual transmission shift performance test bench

A new novel data reconciliation model

Output properties of HEMT of nanocrystalline/crystalline Si heterojunctions

Experiments with phase-delay method for slow light in photonic crystal waveguide

Properties of yellow organic light-emitting devices based on E-2-2-5-bromothinophen-2-ylvinylquinolin-Zinc

Denoising the signal of the quartz flexural gravitational sensor by adaptive kalman filtering

A MAP equalizer for the wireless ultraviolet communication

A improved rapid restoration algorithm of motion blurred coal dust image

Existence of Common Lyapunov Function based on KKM lemma for switched Persidskii-type systems

The application of fuzzy control in high accurate automatic powder dosing system

The connectivity of edge-fault-tolerant enhanced hypercube

Modelling and calculation for dielectric response circuit of oil-paper insulation transformers

Analysis on the noise sources in data-acquisition system

The discussion of how to control the HXD1B electric locomotive train

A comparison of hardware implementation of BP neural network based on NIOS II single-core and multi-core processor

Analysis and implementation of complex phase-coded pulse signals

A 10 GB/s CMOS transimpedance amplifier with adaptive gain

An improved RED algorithm with sinusoidal packet-marking probability and dynamic weight

Multiple degree of freedom prosthetic method of random target location

Design of wireless sensor node for drought monitoring in tea plantation

Notice of RetractionResearch on development of direct torque control

Chaos synchronization of two different hyperchaotic systems with unknown parameters

Design and implementation of a boost power factor correction stage operated in mixed-conduction mode

Research and implementation of visual control technology with AGV

Performance study of multi-phase permanent magnet generator in wind generation

Virtual enterprise: The content and extension of four basic assumptions

Approximate controllability of stochastic integrodifferential system with nonlocal condition

Effective global searching method based on radial basis function

Robust impedance control of pressure-sensor free pneumatic servo systems

Real-time compression algorithm of railway bridge monitoring signal based on morphology

Design of MPPT algorithm under partial shadows

A novel dynamic TDMA protocol for ad hoc networks using directional antennas

LMI conditions for stability results for stochastic neural networks with time-varying delay

Notice of RetractionA new algorithm for reduction of peak-to-average power ratio in MIMO-OFDM system

Evaluating model of cruise missile warhead based on LMBP neural network

Intersection resolution method for cloth simulation

Digital watermarking algorithm based on SVD in DCT domain

The research on drilling oil wells model in the sense of a triangle distance based on the old wells data

A novel nanoscale staggered 6T SRAM cell layout to mitigate multiple nodes charge collection effect

Motion compensation in SAS with multiple receivers based on Range-Doppler imaging algorithm

The design of the telemonitoring system based on B/S mode

An automatic method for image mosaic based on feature matching

Strength analysis of 130t liquid iron tank shell

Notice of RetractionThe improvement of MPO and LS-SVM algorithm in soft measurement model of NIS

Study on optimal starting time of detention ponds and water resource reuse

Dynamic analysis of Nano-precision stage with aerostatic bearing

The pump house constant pressure fuzzy self-tuning PID control system simulation

Thresholding of a sonar image from a small underwater object using the maximum entropy of the one-dimensional bound histogram

Notice of RetractionWrench assembly design in OpUs darwin SO (spray-off) automatic assembly machine

Textile spinning-frame roller fault diagnosis based on improved wavelet analysis and support vector machine

Design and implementation of interaction mode for system test based on wireless PDA

A reconfigurable multi-band CMOS power amplifier design

Experimental study on combined deactivating effect of K and Ca on SCR catalysts

The investigation and optimization of LiF cathode buffer layer based on ZnPc/C60 solar cells

Research on positioning of GMA based on improved Prandtl-Ishlinskii model

Analysis and compensation of error introduced by grid calibration for RFID package equipments

Application research of telesurgical robot control system with force feedback device

Theory and design of one-axis stable platform for rotation

Notice of RetractionThe parameter design research of non-circular gear based on MATLAB and Pro/E

Notice of RetractionResearch of data integrated technology of valve CAD based on CORBA

Parameters identification of power system transient signal based on Prony algorithm

Research and realization of AIS ship dynamic monitoring system based on SOA

Decimal counter based on redundancy-restraining technique

Adaptive thresholds edge detection for defective parts images based on wavelet transform

A method for CBOC signal processing

Comparative study of service industry pattern college education in France and China

A self-acting water pump control system for residential buildings based on resonance water level sensor

AMT starting process analysis and clutch thermal balance estimation model

Numerical analysis for load-bearing capacity and cushioning performance of structural unit of molded pulp product

Study of threshold voltage modeling for small-scaled strained Si nMOSFET

Direct current linear actuator using in the active suspension system of automobile

Notice of RetractionExchange and integration of heterogeneous data with uncertainty in city emergency system

Investigation of residual stress influence on CMUT in standard CMOS process

Design and realization of portable direction-finding and communication receiver

Analysis of applicability of numerical simulation on the pit constructing safety of the metro station at the alluvial flat

Message delay analysis for deterministic Ethernert based on TDMA scheme

Modern ship-to-shore data communications technology

Study on rapid linearity detection of LFMCW radar

The achievement of Automatic Parking Control System of lifting and Transferring Stereo Garage based on real-time exchange parking stall

The theoretically analysis of phase matched microcavity coupling system

Approach to improve the injection weight repeatability accuracy in the process of the precision injection molding

Fault detection approach to EMB sensors based on dedicated observers

Research on movement control technology of Stacking Crane

An on-line technology for measuring chamber temperature of blast furnace

Design and implementation of a measuring system for shipbuilding based on WinCE

Optimization control for mobile robot trajectory tracking based on the improved VFSA algorithm

Industrial product design theory and method based on the advanced virtual design concept

Study on influencing factors of denitrification by a step-feed multistage biofilm reactor

A simulation research on the reverse recovery characteristics of PIN diode

A new method for risk analysis of reservoir generation dispatching

The SoC design and realization of small scale solar irrigation control system based on FPGA

The design and implementation of modern Drug Administration system based on wireless network environment

The study of image edge segmentation based on Hough transform

Research of authentication mechanism in CHAP

Plunger and core parameter modeling research of cylinder valve in hydrogen fuel cell vehicles

Simulative analysis of traction motor cooling system based on CFD

A study on Variable Region Variable Step-size LMS adaptive control of distillation columns

Multi-sensor management: Optimal allocation of tracking resources for Pd < 1 based on the interacting multiple model modified kalman filter

Control strategy of microgrid inverter operation in Grid-connected and Grid-disconnected modes

The design of intelligent building control system

Gob detection using three-dimensional great deep distributed resistivity imaging instrument

A new high-precision frequency and duty cycle measurement method with FPGA implementation

Compact and high selectivity dual mode microstrip filter with source-loaded coupling

Research of a three-phase separate control SVPWM technique

Servo Controller Based on DSP and MCX314 for pneumatic load simulation platform of aircraft actuator

Risk analysis of a subway tunnel shield based on a fuzzy synthetic approach

Design of IP core for real-time simulation on switching characteristic of IGBT

Parameter identification for time-varying systems by evolutionary neural network

Elements analysis for nonlinear learning process

Research on measurement of urban-rural integration level in province-governed city

A Secure Web services-based workflow management system

The design of 40∼160MHz RF signal source

ARM9-based embedded controller of the boiler combustion

Design of low phase noise and fast locking PLL frequency synthesizer

The study of applying ubiquitous computing interactive technology to adaptive architectural environments

A hybrid H component histogram threshold and sparse field level set algorithm for litchi image automatic segmentation

The design of small scaled solar battery charge and discharge control system

Research on an integral driving controller based on DSP for robot moving joints

Notice of RetractionDesign of communication module based on the ARM and VPC3

The law of large numbers of ρ̃ mixing sequence

Comparison and simulation of two resolve plane algorithms in the strapdown fiber-optic gyro multi-positions north seeking

Multiservice on-demand routing in space information networks

Repetitive learning output-feedback control with unknown high-frequency gain sign

Design of Virtual Instrumention for high speed data acquisition based on PCL-818HG

An improved midnormal-based area localization algorithm

A TDC method-based design of temperature measuring circuit

Construction information management in CCTV

Conductivity and magnetic properties study on doped semiconductor material of 3C-SiC: A first-principle investigation

An intelligent variable pitch angle control approach in grid connected wind turbine

Path planning based on immune genetic algorithm for UAV

Time-delay model identification of superheated steam temperature for electric power boiler

Study on Key technology of BIT and self diagnosis of complex weapon equip

Mobile robot for overhead powerline inspection and a controlling method for obstacle avoidance

Research on running state control for the AGV based on reflected infrared photoelectric sensor

Design of a fall detection system

Quasi-static absolute calibration method of piezoelectric sensors for pressure measurement

Research on method of main reducer assembly quality evaluation based on K-L transform and support vector machine

Dynamic target tracking with multi-feature covariance based on Kalman filter predictor

A HMM_based hot topic lifecycle prediction model

Study on optimization of isolated heat pipe heat exchange system based on SQP

The research of the stochastic reward net model for the cluster tool in serial-parallel mode

Notice of RetractionA design of full digital servo system based on PC/ 104

Fuzzy sliding mode control for boost converter

Application research of pressure sensing system in agriculture based on SCM

Research on suction properties of ac electromagnet based on Ansoft

The specterum analysis of double-speed sampling based on LabVIEW

Notice of RetractionApplication improvement Max-Min Ant System optimization SMT placement sequence

Optimal design on twin-T notch filter in electromagnetic exploration equipments

Panel data-based analysis of factors influencing the location selection of bulk commodities' exports an example of agricultural products

Design of humanistic electronic bus station board in the public traffic system

PSO-SVM model for gas/liquid two-phase flow regime recognition

Design of multistage evolution of different-structure redundant digital system based on graph theory

The analysis on pollutants collection efficiency of push-pull ventilation system

Experiment analysis of CO2 laser disturbance on long-wave infrared HgCdTe detector

Notice of RetractionDevelopment of high resolution and low noise transient electromagnetic receiver

R-V control strategy of electric-wheel independent drive vehicles

Notice of RetractionThe discussion on the optimal design about pipeline system of Tarim University take the Western campus for example

Research on knowledge acquisition optimization of continuous attributes of product based on hybrid classification method

Direct feedback control of CBDFM based on rotor field oriented

Calibration transfer of near infrared spectroscopy based on DS algorithm

Blurred image processing of aerial image based on improved Wiener filter and Wavelet transform

Wavelet analysis based on DSP gearbox vibration signal processing applications

Supporting optimization analysis on the poor geological section construction of ZhangShi highway HeiShiling Tunnel

Simulation Object Runtime Database: A new design pattern and develop method for CGF system

Development in mechanical product collaborative simulation technology

The study of parallel strain distribution in channel of PMOSFET with silicon-germanium source and drain regions

Pseudo-generalized Hamiltonian theory and its application in nonlinear stabilizing control of multi-machine system with losses

The research on problems of electronic commerce and strategies

The application of mirror closed endpoint continuation upon restraining endpoint effect

Stability design for a class of nonlinear networked control systems

Design of network management system for optical terminal based on embedded web server

Nonlinear simulation of Kaplan turbine regulating system based on RBF networks

Study on the carrier frequency of Carrier-wave electronic speckle pattern interferometry

Periodic solution and stability for a class of linear hybrid automata

Measurement application on transport package of electronic products—Prototype tests on transport package of washing machine

Overcomplete ICA algorithm of speech signal extraction in underdetermined mixtures

Sale forecasting method in dynamic environment based on ARMA(1,1)

Design of intelligent archives measuring and controlling system based on fieldbus

A flexible card configuration system for instrument testing in wafer fabrication equipment

Designing and analysis of a new book-lending system based on logic Petri nets

Numerical simulation of flow around rotationally oscillating plates

The effects and strategies of information asymmetry to academic library

Research on method of analog circuit fault diagnosis based on voltage sensitivity ratio

A novel integrated islanding detection method based on adaptive accelerating frequency drift

Optimization design of selective catalytic reduction system for diesel engine

The reasearch to the signal transmission for fire detector

Vector control of induction motor based on selective harmonic elimination PWM in medium voltage high power propulsion system

Estimating fisheye camera parameters using one single image of 3D pattern

Experimental study of fA level micro-current measurement

High step-up converter based on coupling inductor and charge pump with active voltage clamping

Finite element simulation of building deviation rectification through excavation

Notice of RetractionResearch of fitting straight line calibration applied to temperature testing of concrete beams

Application of BP network to short-term power load forecasting considering weather factor

A car steering rod fatigue analysis based on user conditions

Study of antenna performance for a dipole antenna integrated in a WCDMA router

Elastic motion stability analysis of flexible manipulator arm

Current reused Colpitts VCO and frequency divider for quadrature generation

Handover performance of relaxing SCell measurement period in LTE-A with carrier aggregation

Robust study of dual-rotor continuous mixer control system

Notice of RetractionCreep model for Zonal disintegration of deep rock mass

Simulation for vehicle pulse input based on rigid ring tire model

Analysis on some key features of motion control network

Research and implementation of a method based on IST for measuring plate parameters

Study on a in situ sludge yield reduction SBBR system by biological uncoupling

Optimal network location model study of emergency system based on the connection number

MD-ISE-FE multi-scale modeling of interface structure in microelectronic devices

Campus E-Learning system combine with the cloud computing

Semi-automatic road centerline extraction in high-resolution SAR images based on circular template matching

Design of short term load forecasting model based on BP neural network and Fuzzy rule

The MOTIF evaluation method and its region combination algorithm for surface texture

The design of negative sequence current monitoring instrument based on DSP and ARM

Series cascade control of coal-fired drum boiler

Study on the reliability of AlGaN/GaN HEMTs at high temperature

Attitude control of an asymmetric 3D rigid pendulum

Practical group signatures from Hyper-elliptic Curves Cryptography

Research on the cleaner production of municipal waste water treatment plants in Zhejiang province

Using DSP to design spectralog service instrument

Design of an efficient contactless energy transfer system for battery charger

Research on smart space oriented context-aware system

The design of the displaying system based on the SOPC embedded chips

Intelligence monitoring system based on arm and information fusion

Research on power allocation method in cognitive radio based on OFDM

Notice of RetractionThe application of non-linear editing in the TV programs designing

Design of auto-guard system based on RFID and network

Investigation of the thermo-flowfield in an underground concentrating solar tower

Notice of RetractionThe design of motor data acquisition and control system based on DSP

Application of individual differences ant colony algorithm in transmission network expansion planning

Analysis of energy saving routes for sewage treatment systems based on flexibility theory

Research on modulation classification algorithm with interfere signals

Study on application of CRM in e-government based on public service

A new low-power LDO chip: It's current is 9µA on no-load

Functional verification of EPA chip

Experimental study on dynamic characteristics of a high-speed rolling ball bearing support system with rubber rings

The tool trajectory optimization of spray painting robot for spherical surface

A modified unwrapping method for omnidirectional images

Design of adaptive fuzzy logic controller for LED driving circuit

Application of modern information technology in protecting intangible cultural heritages of Handan

Computer simulation of large particles effect on soil

In the design of online course based on knowledge visualization of tacit knowledge conversion strategy research

An included angle based nonlinearity measure for hammerstein-like systems

Design and implementation of intelligent public transport system based on GIS

Mathematical model and characteristic simulation on performance of the valve plate damper

Load forecasting based on wavelet analysis combined with the fuzzy support vector kernel regression method

Fiber bragg grating based rotating speed measurement system

A new system of operation ticket for generation and misoperation prevention in smart distribution network

Study on magnetizing model of TA core based on Jiles-Atherton theory

A contour-based surface modeling approach for scattered human body data

Sequential circuits test generation using GTL

Study on noise prediction and control methods of the converter transformer

Application of a new-type battery nipple in the downhole trajectory control tool

Analysis of energy transfer behavior of Buck -Boost converters

Relation-based information searching system

Calibration and error analysis for polarized-light navigation sensor

Communication Satellite Location /Cell Location integrated navigation system for all-blind war

Multi-product lot-size models for the hybrid system with finite recovery capacity

Research on a new measurement method of fuze action time

Design of the remote data acquisition system based on FPGA and USB

An investigation on increasing photoelectric conversion efficiency for DSSC

Thought of public facilities design of landscape architecture in college creative industries

Moving human tracking algorithm based on partial Hausdorff distance

A speech recognition method based clustering neural network integration

A parallel interleaving converter with soft-switching

Research on low power design methodology of Register files based on FPGA

The proposition of non-linear learning path and its characteristics

Theory of regular triangle's scatter sequence and LINGO realization

Application of RS485 for communication and synchronization in distributed electromagnetic exploration system

Design of a diffuser plate with micro-structures for direct type LED backlight

Development of high voltage source for electronic beam welder based on phase shift control

A novel open Automatic Test System based on SI and SCMM technology

The estimation of distribution network running state based on load measuring and control system

Application of sound quality metrics in automobile air-conditioning unit

Notice of RetractionA practical distributed electronic voting system

Tracing of transmission assembly quality based on rank-sum test

Technological research on the detection of working state of large-scale equipment used to screen granular

A data pretreatment technique about power system load modeling

Effects of the thickness of DPVBi on the performance of WOLED

Highly Color-purified-white Organic Light-emitting Devices

Notice of RetractionThe research and realization of process data management system of collaborative product commerce based on Web

Dynamic coverage path planning and obstacle avoidance for cleaning robot based on behavior

Research on parallel operation of distributed inverter based on variable droop coefficient

A new double frequency exciting mode for the electromagnetic flowmeter

A channel assignment scheme for handover between the ajacent extended cells in RoF networks

Study of FM25L256 application in digital geophone

Exponential stability of a class of linear stochastic interconnected large-scale systems with time delay

Dynamic coupling analysis and modeling for stabilized platform of rolling-pitching seeker

Structure and dimension optimizing on DP micro-flowmeter

Design of eye-controlled multi-mouse based on OpenCV

Detection of fume hood operator based on image processing technology

Research on the project of receiving the hybrid-source magnetotelluric signal synchronously

Instant fuel consumption test method and experimental analysis of EFI vehicle on the move

Synthesis of dynamic corrector to improve accuracy of course stabilization

Multimode vibration supression of smart structures based on model reference adaptive control

Design and HIL verification of fuzzy identification controller for electronic parking brake system based on dSPACE

The parameter optimization of missile actuator based on spatial RSSR linkage mechanism

Intelligent liquid drip rate monitoring and early warning systems

Design application on ERP system of coal mine safety

Overview of cluster-based routing protocols in wireless sensor networks

A new control design for traffic lights at the intersection of medium and small cities

Theory-and-practice combined state assessment system of new energy vehicle

Parameters design of 1.25GHz low jitter charge pump PLL

Quantitative evaluation for the influence of Shanghai expo on Chinese economy

Rehabilitation training interface for finger

A novel crack detection sensor based on finite element principle

Theoretical analysis and numerical calculation for stability of synchronous generator-rectification system

Effect of gimbal point displacement on optical axis pointing precision in an image seeker

A design of natural gamma spectrum logging system

Research and simulation of an improved Halbach arrays

Novel flexible folded systolic architecture for symmetric FIR digital filters

Design of fault diagnosis system for polymerizer process based on neural network expert system

EGR control and simulation about EGR rates influence on diesel engine operation performance

Notice of RetractionStudy on the dynamic prediction system of gas omission for coal beds

Comparisons of the protein-protein interaction networks constructed from the DIP database with different version

A magnetic field monitoring system for MRI using $^{19}F-NMR$ technique: A preliminary study

Application of computer vision in performance test of aircraft engine nozzle

The design and realization of ZigBee—Wi-Fi wireless gatway

Derivation of the precise calculation formula of compliance and optimal design of circular flexure hinge

Notice of RetractionCapital letters recognition based on neural network

Research on mechanism of control surface subsidence by underground key isolation layer filling and its application

Solutions and experimental verification of bipolar selected harmonics elimination PWM waveforms Applied in control system of induction machine

Electric drive system with BLDC motor

The design and analysis on position measuring system of huge-scale die forging press

Physical design of YAK SoC by using an efficient clock tree synthesis method

An improved FCM for image segmentation

Use of real-time/historical database in Smart Grid

Design and implementation of WSN monitoring system for grain depot based on XBee/XBee Pro

Assessment for effectiveness of missile-gun integrated weapon system based on FSKA model

Notice of RetractionStudy and application of optimization design scheme of roadway bolt support parameter

The investigation of slipping resistance about steel tube scaffold coupler

Testing System design and realization of helmet-mounted display

The establishment of operational mission information quality evaluation index system based on grid nets

Research on circuit fault diagnosis based on NNs and volterra series

A novel method of power flow analysis with UPFC considering limit violations of variable

Linear H∞-controller design for fuzzy descriptor system based on the dynamic output feedback

Shaking table model test of a large steel-concrete hybrid high-rise building out-of-codes

Research of effective value measurement method in smart grid

Design of the Multi-computer communication system based on RS485

Electron energies of InAs/InP quantum wires

Spectra of laser acoustic signals in water

The BP neural network model and application based on genetic algorithm

Gaussian particle filtering algorithm for out-of-sequence-measurement problem

A component compensation approach for thermal flow meter

A frame synchronization algorithm in burst OFDM communication based on IEEE802.11a

Construct new concept lattices based on rough set theory

Model optimization of nanocrystalline Si∶H HIT solar cells

One adaptive method of license plate location based on differential projection

Design and implementation of a 16 phases DC/DC buck converter

2.5-GHz hybrid oscillator with both a wide tuning range and high frequency resolution for digital PLL

A lithium battery pole thickness measurement system based on laser displacement sensor

A Reconfigurable PCB test system based on VI

The Research of ECT system based on rotational electrodes array

Study of induction motor direct torque control for speed sensorless

Research application on fuzzy control adaptive Dahlin control for hydrogen—Nitrogen ratio control system in synthetic ammonia

Fuzzy statistics model of air quality health in public and its application

Simulation of sensing field for electromagnetic tomography system

Notice of RetractionRoute chart of the effect of the end position addition mass on the parameter change of flexible manipulator arm

Technology of smart noise jamming based on multiplication modulation

Cutter setting calculation for CNC hobbing non-circular gear

Finite element analysis of the torque strengthen effect in Unified Field Dual Mechanical ports machine

Application of anomaly detection technology in email virus prevention

Timing analysis of communication cycle on vehicular FlexRay network

Application of expert system in Chinese massage robot

Design and implementation of S-Tap Membership function applied to non-motion-compensation de-interlacing algorithm

A simple SVM control algorithm for three-level inverter

Multi-scale feature extraction algorithm of ear image

Design and realization of remote real-time data acquisition for a linear CCD camera

Prediction of VLF electric strength based on waveguide mode theory using GA

Research on simulation model of rotameter

Design of disturbance observer for air ball movement system

A study on processing method for outliers obtained from CNC gear measuring center

New development of fuel cell vehicle

Research of controllable load module analysis and control algorithm on linear motor test platform

Research on fault diagnosis of some aero electronic equipment based on Rough Sets Theory

Effect of base heavy doping on thermal characteristic of SiGe HBT

Co-design of control and scheduling in networked control system with delay and access constraint

Investigation and application of sequential quadratic programming based on simulated annealing

Bounded passivity-based control of wind turbine with doubly fed induction generator

A wide tunable range pseudo-differential OTA

Notice of RetractionA new high sensitivity fiber Bragg gratings acceleration sensor based on four beams and a ring

Notice of RetractionThe design of wireless wave height sensor network node based on Zigbee technology

PMSM twelve sectors DTC system with minimum iron loss

Research on data fusion technology for integrated composite sensor for mining

Analysis of noninverting amplifiers' gain error patterns by MathCAD

An note on absolute ruin probability in a Markov risk model

Study on N type 4H-SiC minority carrier lifetime by microwave photoconductivity decay technology

Notice of RetractionHSPA-based electric power mobile office system

Soft starting simulation of direct-current motor

A secure framework for web service interaction

Prediction for ultimate vertical bearing capacity of cast-in-situ single pile based on RBF neural network

Notice of RetractionDevelopment of the remote monitoring and control system on solid rocket motor for pushing cores model

Fault diagnosis of power transformer based on clustering binary tree SVMs

Dynamic positioning control of airship

Optimization of heaters for flying height adjustment

Microwave Remote sensing sea surfaces covered in oil

A new method for direct signal recover in non-cooperative bistatic radar

Notice of RetractionAn intelligent system of multi-agent technology-based for multi-sensor fusion

A novel SoC design of Gas Volume Controller with network and smart card functions

Design and study of control system of automatic tool changer

The design and implementation of high-temperature superconducting magnetometer control system

Face recognition based on bionic Pattern

Fuzzy-PI control system for speeding of paper cutting machine Based on PLC

Performance comparison of DTC of open-circuit fault PM BLAC motor based on modified voltage and current model flux estimators

Study on adaptive Cruise control spacing policy and stability analysis

Study of energy management optimization for hybrid electric scooter using dynamic programming

An adaptive extended Kalman filter for attitude estimation of Self-Balancing Two-Wheeled Robot

Researching on the linear X-ray detector application of in the field of steel-core belt conveyor inspection system

Variational approach to second-order impulsive elliptic equations with periodic boundary value problems

Mobile robot position tracking control law based on stabilization

Kalman filtering design for agricultural vehicle state estimation

Coupled numerical simulation of fluid field and temperature field in five-strand tundish of continuous casting

Multi-agent modeling & realization for interface system of industrial monitor and control system under X3D

Fuzzy algorithm's analysis and realize of random demand system

Digital watermarking algorithms based on curvelet transform

The simulation of three-dimensional temperature field of repair welding on the bucket bandle

Design and application of a production control system for multi-products line

Separation of EOG artifacts from EEG signals using Hilbert-Huang transform

Experiment on roughness identification using thermal tactile sensor

Electric fields produced by vertical time-harmonic current immersed in shallow sea

Multi-functional medical simulation teaching system based on ARM

Remote RFID reader communication design and implement based on the Internet network

Surface profile detection by transverse Doppler frequency shift

The analysis for system-on chip application on Full Authority Digital Engine Control system

An universal frame for remote monitor and control application in X3D based on OPC

Design of the modified energy recovery logic circuit

Fuzzy observer design for nonlinear stochastic time-delay systems via sliding mode control

Damage detection in truss structure based on wavelet analysis

The normal cloud model of fuzzy inference prediction method for petroleum drilling accident

A study of power system parallel simulation methods based on multi-core multithreaded processor platforms

Simulation and optimization of hybrid wind-solar-pumped-storage power system

Two-scale computation for 2-order elliptic problem with periodically oscillating coefficients

System design of mobile emergency power plant based on fuel cells

Semi-active control using mr dampers based on fully decentralized control strategy

Research on numerical simulation of water-mist in log pile

Study on the rotation error of high-speed spindle based on two-point method

Calculation analysis of the thermal stability of embankment with different road surfaces and rich moistures in the permafrost regions of the eastern plateau under the climate warming

A 20-GHz 4.8-dB NF low noise amplifier

The research of Aitken-EM accelerate algorithm in Non-Gauss noise

2nd-order voltage-boosting converter based on charge pump and coupling inductor with passive voltage clamping

Dynamic timeout-based a session identification algorithm

Pressure analysis of a new type of axial piston pump's port plate pair with uniform flow

A trainable Vietnamese speech synthesis system based on HMM

Study on the method of selecting test nodes based on ambiguity entropy

Characterization of cusp bifurcation for maps in the frequency domain

Research on the signal process circuit and fault diagnosis of sine-cosine resolver

The research of greenhouse temperature control based on fusion technology

Wire detection using single-slit diffraction

The research of based on ARM9 core units embedded video monitor system

High sensitive and rapid responsive n-type Si: Au sensor for monitoring breath rate

Spectrum fitting to improve the vertical resolution of ground penetrating radar

Dynamic hand gesture recognition based on SURF tracking

Performance of pulsed OFDM systems for UWB communication

Distribution of gyroscope accuracy parameters for E-O stabilization platform

The research of internet public opinion's tracking algorithm

A novel phase-locked loop for three-phase ups under distorted utility conditions

Notice of RetractionDesign of intermediate frequency electrotherapy apparatus based on CPLD

Simulation modeling and experiment to reduction of NOx emission by using SCR control system

The design and research for the shaping of the LDA

A kind of novel monolithic microwave integrated circuit base on statistical experimental design method

The application of NILM in energy evaluation of smart home: Contrast with IPv6

L2 critical process control technology and system application for aluminum strip cold mill

The autonomous robot object recognition algorithm based on multi-feature fusion

A comparative study of A-star algorithms for search and rescue in perfect maze

A parking algorithm for Parking Assist System

On the genetic-search-algorithm-based Multi-parameter Optimization Design System of Packaging Container Size

The design of a wireless transmission of digital video monitoring system for vehicles entering and leaving the harbor

Analytical model for hole mobility in (001)-biaxially strained Si

Notice of RetractionBased on Linux platform transformer substation synthesis intelligence transmission flow control research

A discussion about the solutions of the matrix equation AX=B and its structure

The communication interface design of AT89C51 preparation robot based on Serial

Pipelined architecture for FPGA implementation of lifting-based DWT

Avoiding obstacle control for manipulators of the hot-line work robot

The study and design of multi-function detective devices of drug boxes

Notice of RetractionBased on MCU auto-adapted digital PID fluid position control system design

Short-term electricity price forecasting considering heavy-tailed features

The research on transmission of networked control based on IP switching

Design and implementation of simulated Low Level Light environment for night vision equipments' testing

A multi-view video coding based on correlation analysis

An application of Google Map and tabu-search Algorithm for Traveling Salesman Problem on Tel-Home Care

Design of stability augmentor for aircraft nose wheel steering system based on Hopfield network identification algorithm

Resistant against power analysis for a fast parallel high-radix RSA algorithm

A novel adaptive phase selector based on fault component

Development of centering alignment detector for high precision seamless steel tubes

Design and development of web-based computer teaching auxiliary system

The research on ZigBee-based Mine Safety Monitoring System

Oil tank system for automatic measurement and stocktaking

REALISM: A step toward future heterogeneous wireless network combined with Cognitive Radio

A study on the arch type ultrasonic motor

Research on point-to-point of Biomimetic Robot-fish based on fuzzy control

Notice of RetractionResearch on application of combined model for GPS leveling

Design of a novel domino XNOR gate for 32 nm-node CMOS technology

A 512 bits Phase Change Memory embedded IP based on 0.18-µm CMOS process

Research on control strategy and modeling-simulation for tracking maximum power point in VSCF wind generation system

Adaptive sliding-mode guidance law with finite time convergence

An analytical model of axial magnetic thrust and Finite Element simulation for a moving magnet linear motor

Research on non-uniform emitter spacing technology to improve thermal stability of multi-finger SiGe HBT under High-Power

Particle filter tracking method based on adaptive fusion of multiple features

Load balancing algorithm for heterogeneous P2P systems based on Mobile Agent

Advanced robotic digital actuators controlling and communication methods based on MATLAB

Application of dual-port RAM in data controller

An image pixels based fast matching algorithm for Die Bonder targeting

Industrial perspective analysis of construction waste resource recycling

Design of performance indicators auto-test system for potentiometer

Research of dielectric loss measurement method of wiener filtering and windowed Harmonics analysis based on wavelet transform

The simulation for damage of metal powder compacts during forming

Estimating method of disease incidence in the SEIR epidemic model

The flow pulsation simulation for the new sine gears of flow meter

Study of fault line selection in the non-solidly earthed network based on the method of increasing the grounding capacitance of the line

A wavelet transform based discrimination between internal faults and inrush currents in power transformers

Design and implementation of camera calibration system based on OpenCV

High-speed stamping equipment status monitoring system design

Notice of RetractionStudy on adaptive control system of electrode for arc furnace

Adaptive feature extraction of four-class motor imagery EEG based on best basis of wavelet packet and CSP

Friction control of one-dimensional particles with Morse-type interaction

High-precision infrared pulse laser ranging for active vehicle anti-collision application

Test and application study of allowable dynamic carrying capacity on transmission lines

A method of placing sensor position for inspection with constrained visibility

IFDS operation mechanism and its implementation

A design of monitor terminal for urban water supply base on LPC2210

The study of Spread Spectrum Time Domain Reflectometry for cable fault detection and location on-line

Driver development for MIC-2718 in field control station of DCS

A scheme and debugging of RTOS based on OSEK/VDX

A microscope with large depth of the field realized through an axicon

Study on technology of synchronized DC/DC in super electric capacity application

Methods for test and factor analysis of system simulation results

Dynamic coordinate method for home return of cleaner robot

The study of polyaniline sound absorbing film materials

Notice of RetractionLarge rectangular collecting algorithm and implementation

Pre-designed Prognostic cells for host circuits reliability monitoring

Research on the state equation of the position loop and speed loop in the PMSM cascade sliding mode control

The research of control for sintering burn-through point based on finite-state machine

Driver pre-accident operation mode study based on vehicle-vehicle traffic accidents

Application of a Discrete Sliding Variable-structure System for switched reluctance motor drives

A scalable solution of fuel cell backup power for telecommunications facilities

High speed and high precision position measurement system based on PSD

Research of three-phase PWM rectifier parametric circuit simulation based on Psim software

Study of mining induced overlying rock fissure numerical simulation based on intelligence parameters inversion

Determination of Vapour Pressure of gasoline by double ANN algorithm combined with multidimensional gas chromatography

A quick algorithm for circularity error evaluation based on minimum circumscribed circle method

Based on dead-time compensation of fuzzy adaptive control system study

Prediction of the concentration and size distribution of indoor suspended particulate matter

GA's arithmetic on time-cost optimization in architecture engineering

Leakage detecting and localizing for gas pipeline based on pressure time series

Calculation of the damping torque of radial magnetic damper based on Ansoft

The temperature humidity monitoring system of soil based on wireless sensor networks

A model of path fault recovery of MPLS VPN and simulation

Modeling and simulation of the cascaded brushless doubly-fed wind power generation system

Research on the all-position pipeline automatic welding carriage

UNB transfer system based on EBPSK modulation

The application of the ancient ecological environmentology in modern residential district planning

An modified gradient training algorithm of process neural network

Real-time template matching based on gradient direction vector product

A time-optimization algorithm for soccer robot's path-planning in dynamic environment

Notice of RetractionBased on Fuzzy - PID self-tuning temperature control system of the furnace

The design of circular saw blade dynamic performance detection of high-speed data acquisition system

Control of Hybrid Electric Bus based on hybrid system theory

pH-sensing characteristics and hysteresis effect of AZO/Glass extended-gate field-effect transistor

A high performance Low-Dropout regulator with a novel buffer

Study of an algorithm of GA-RBF neural network generalized predictive control for Generating Unit

Measurement of thermal parameters for mineral oil with transient method

Design and implementation of city fire control management system based on GIS

Design of a high precision conductivity measurement system

Development of a motor-driven powertrain for hydraulic lift system of aerial work platform

System of solveing relative motion based on MATLAB

Notice of RetractionEmpirical analysis of China's use of FDI and the relationship between FDI and Foreign Trade

The design and implementation of RS485 and USB converter module

Application of flue gas dry desulfurization control system using PLC in power plant

Strategies for natural ventilation of residential

A forward-secure blind signature schemes based on bilinear pairing

Numerical simulation of aluminum extrusion process using body fitted grids based finite volume method

A distributed cable harness tester based on CAN bus

A Modular Neural Networks ensembling method based on fuzzy decision-making

An ILP algorithm for voltage-island generation considering temperature in 3D-Ics

Symbolic computation and construction of theta function solutions to the mKdV-ZK equation

Vitamin C content estimation of chilies using Vis/NIR spectroscopy

LS-SVC based recognition method of the centrifugal pump cavitation intensity

Design and realization of cone beam CT 3D image reconstruction based on FPGA

A bandgap voltage reference circuit design in 0.18um CMOS process

A low information feedback beamforming scheme in distributed MIMO downlink systems

Concept lattice expansion and recovery based on reduced formal context

Thermal-structure analysis of supersonic dome based on three materials

The mapping characteristics of one-dimensional cloud model controller

Modeling and simulation of driving system for electric vehicle based on fuzzy control strategy

Wideband digital Quadrature Transformation based on perfect reconstruction filter banks

A novel starting control for sensorless three-phase permanent-magnet brushless DC motor

Establishment of expert system for Hanfu Apple Industrial Science and Technology Service System

Study of mechanism and elimination measure of ferromagnetic resonance in low-voltage power system

Analysis and improvement of singular value decomposition-based watermarking algorithm

Research on grid-connected inverter based on fuzzy PI controller with self-tuning parameter in wind generation system

Based on discrete Hopfield neural network and wavelet transform character recognition

Cyber Physical Systems—Construct wise earth

Modelling and optimisation control of polymer composite moulding processes using bootstrap aggregated neural network models

A 1.25Gb/s high gain, wide dynamic range pre-amplifier in 0.35H5;m CMOS

Theories and algorithms of time-dependent shortest path in GIS

Filter design and optimizing based on a neural network

Notice of RetractionInfluence of photonic band gap of magnetized plasma photonic crystals of faraday effect by multi-photon nonlinear Compton scattering

Analysis of road tunnel fire risk based on Fuzzy Fault Tree method

A module of the public safety information management system based on streaming data

De-noising of spectral signal based on stationary wavelet transform

Accuracy analysis and optimization design of constant-diameter cam

The zero-knowledge proof schemes based on a conic curve over finite fields

The realizations of electro-control system for an opposed-exciting thermoacoustic refrigerator

Interoperability of the Simulation-based Training Support Environment with C4ISR system

Analysis of relationship between size of image resolution and recognition performance

Non-fragile H∞ control for a class of generalized discrete-time Markovian jump systems

Development of seismic data acquisition based on ARM-Linux

Design and simulation of construction machinery based on Fuzzy PID

Applying Bayesian trigram filter model in spam identification and its disposal

Multithread serial communication model base on windows CE

Global robust stability analysis for uncertain stochastic neural networks of neutral-type with time-varying delays

An ECG front-end subsystem for portable physiological monitoring applications

Surface deformation measurements of a finger-joint timber by object-oriented technique and digital speckle image correlation

The system of multi-signal information processing based on PCI-E bus

A high precision displacement sensor based on dual-gratings interference

Image dual scrambling encryption algorithm based on parameter variable chaotic system

The development of a vehicle suspension Kinematics and Compliance facility

Decision-making and design of blowing argon control systems for molten steel container

Development of liquid crystalline micro- electric machines numerical simulation and experimental study on the mechanism of the backflow

New series lower bounds for the solution of the continuous algebraic Riccati equation

Optimal design of amplitude phase shift keying constellation for satellite communications

A time synchronization method for SMP2 simulation under Service Oriented Architecture

Research and assessment of high efficiency new temporary plugging agent used for refracturing

A new approach of dead-time compensation for voltage-fed PWM inverter

Leading chaos to order for a nonlinear circuit system

Recognizing human actions from video sequences using invariant shape

Rendezvous of multi-agents with time delay and virtual leader

The design of array CCD data acquisition system based on FPGA control

The technology of entrance ramp control based on the road service level

Research on web service discovery model with concept reasoning

Two approaches for resolving number limitations of the equipments connected in Bluetooth communication

The application of electric heater in heavy oil desanding of offshore platform

Analysis calculation of speed characteristic of hydro-pneumatic spring based on damping valve parameter

Analysis the image transfer characteristics of integral photography

Research on lidar visibility measurement system for airport

Sliding mode variable structure control for stable platform

Core technology and analysis of 802.11N

A LVS verification flow for hybrid digital-analog integrated circuits

Research on active and reactive power's decoupled control strategy of the AC exited VSCF wind generation system

Optimizing design of magnetic circuit for a self-holding micro electromagnet

Notice of RetractionDesign and development of urban heat island effect analysis system

The modeling and simulation of sensorless brussless DC motor speed-adjusting controller

A real time test bench for the PEM fuel cell engine

Application in mold quotation with the fuzzy set & rough set theory

SAR and MS image fusion based on Curvelet Transform and Activity Measure

Notice of RetractionTraffic video image segmentation based on mixture of Gaussian model

Chosen ciphertext secure broadcast encryption in the standard model

Properties of soil arching between piles and reasonable distance of piles in Slope engineering

Differentiability of metrically convex functions

The design of the scene of the accident alarm system based on ARM and GPS

Effect of time-varying factors on the drift model of Electrostatically Supported Gyro

Non-uniform field data inversion of fixed loop source TEM

Research of double layer filter-tube non-sand-mat vacuum preloading in ultra soft seabed silt hydraulic fill site

ECG signal classification based on BPNN

The optimal model of integrated with the experts' opinions based on partical swarm optimization

Comparable methods for modelling MTLs terminated in arbitrary loads

Sensor installation error analysis and correction in vehicle inertial positioning system

The GPS baseline analysis based on results of three kinds of GPS data post-processing software

Research on One-Cycle control for buck converter

The bearing fault diagnosis of rotating machinery by using Hilbert-Huang transform

Investigation on the construction mode of the charging station and battery-swap station

Characteristic of vertical multi-electrode conductance sensor array in two-phase flow measurement

Design of software platform in General Purpose Automatic Test System based on PAWS

Servo motor control system based on free communication port

A double-end fixed beam structure of MEMS piezoresistive high g accelerometer

A new VOx thin film for uncooled infrared focal plane arrays

Research on system of liquid automatic filling

Residual stress of composites during curing process in LCM

Quantitative analysis on evolution of erosion and deposition in Nanhui tidal flat of Yangtze estuary

The experimental study of electro-optic water monitor meter

Longitudinal dynamics modeling and MPC strategy for high-speed supercavitating vehicles

Discussion the system of medical PACS

Compact LTCC chip antenna for integrated 2.45GHz band applications

Research on online damage identification for steel cable stayed bridge in Anqing

Traffic accident automatic detection and remote alarm device

Chaotic particle swarm optimization algorithm based on tent mapping for dynamic origin-destination matrix estimation

Programming voltage reduction in phase change cells with conventional structure

A circuit model for biological neuron

RFID and ZigBee based manufacturing monitoring system

Research for on-line measuring device of broken wire rope

A sensorless switched reluctance motor driver system control by detecting the derivative of the phase current

Designs of PLC control system of the twin valve filter

Dsp based implementation of space vector pulsewidth modulation in the overmodulation range

A linear maximum variance unfolding algorithm and its application in image recognition

Study on cell-oriented separate micro-manipulation based on SU-8™ and flexure hinge link

Study of monitoring system based on Wireless Sensor Network for landslide geological disaster

Notice of RetractionAccelerated realization method of infrared targets detection based on GPU

Top temperature of benzole stripping column predictive control based on the neural network

The structure statics analysis and transient dynamics analysis of hydraulic support

The vibration analysis of drive shaft based on SolidWorks

Design and optimization of AVS video encoder based on DM6467T

Application of a wavelet fuzzy neural network in microdrilling online monitoring

A design of inverter drive for Permanent Magnet Linear Synchronous Motor

A kind of Electrical Resistance Tomography system

Position control system design based on LabVIEW

Design of an aeroplane ejection seat ATE system

Research on evaluation on well-off rural construction progress based on grey incidence model

Study on optimization control for hybrid electric bus

Virtual community influence consumer purchase decision research

Optimal path planning in field based on traversability prediction for mobile robot

An automatic identification tracking system applied to motion analysis of industrial field

OFDM -CPM performance analysis at Saleh Model

Health status prediction of diesel based on chaotic theory

Risk-sensitive fixed-point smoothing estimation for linear output time-delay systems

A web-based image transmission system using digital watermark

Equivalent textual description and lexical analysis of Petri Net

Motor drive system design for electric vehicle

Design of monitor-and-control system for Supermarket fresh area based on ZigBee

Coordinated control for Statcom and generator excitation based on passivity and backstepping technique

A clustering algorithm based on subjective trust in MANET

Data collecting and processing system of hydraulic support model test

The study of Proton magnetometer sensor fast tuning algorithm based on FFT

Research on keywords Extraction of Chinese documents based on TEXT-NET

A new electrothermal technology based on LIEP method

A measuring instrument for angle based on invariant optical path and autocollimation principle

Numerical simulation study of diesel engine based on new type of crankshaft connecting rod mechanism

The development of virtual instrument and its application in mechanical vibration measurement

Security analysis of FWAI with BAN-like logic

A image recognition algorithm based on visual perception mechanism

Novel solution for blind deconvolution based on independent component analysis

A 25-GHz 9-dB distributed amplifier in CMOS technology

Tunneling between low-dimensional states in nanocrystalline/crystalline Si heterostructures

Research on the synthesis and performances of a new biodiesel, propylene glycol methyl ether palm oil monoester

High performance binarizer for H.264/AVC CABAC

A LDO regulator with slew-rate enhancement circuit for low-power SoC

Wavelet prediction fuzzy Neural Network of the annealing furnace temperature control

Comparative analysis between two kinds of tire model on car ride

Voltage oriented control for three-phase PWM rectifier based on fuzzy PI control

The application of FDTD in the analysis of signal integrity

The design of data acquisition system based on MIC-2000

Design of a scan converter using the cubic convolution interpolation with Canny edge detection

The AC tracking excitation control based on the EKF flux observing technology

Design for target classifier based on semi-supervised learning

Discussion on preferential policy adjustment orientation in Chinese fertilizer industry

Stress testing on car remote monitoring system

Singular configuration discrimination of parallel mechanism based on the motor torque change rate

Improving autocorrelation performance of Skew Tent sequence based on APAS theorem

Weigh-in-motion based on multi-sensor and RBF neural network

The water proportion of oil layer based on C#

Analysis of impact on dynamic performance of ceramic electrical spindle from its motor air-gap

Research on communication link of remote wireless monitoring system based on GPRS and MCU

The optimal sleep control for Wireless Sensor Networks

Optimizing parameters of LS-SVM based on chaotic ant swarm algorithm

Design optimization of FPGA based viterbi decoder

The research on location of skull features

Implement research of fractal image encoding based on OpenMP parallelization model

Modeling for MIMO wireless channels in mine tunnels

The deformation time series prediction based on wavelet and neural network

Study on application of fuzzy control for linearity correction of LFMCW radar

Evaluation of viscosity-measuring error and uncertainty about marine turbine oil

Software design of HDTV test signal based on VHDL

Research on Discrete Variable Frequency soft starting and electricity-economizing control system of induction motor

Design criteria and procedure of interia permanent magnet machine in the electric vehicle application

Research on a novel DC-DC transformer

Modeling and simulation of Vlf field strength prediction

Evaluation system of photovoltaic disturbance effect based on simulations

Texture segmentation based on FCM algorithm combined with GLCM and space information

Global K-exponential Stabilization of Non-symmetrical Underactuated Surface Vessels

Wavelet denoising the signal of the quartz flexural gravitational sensor

Particles size distribution of PM11 and its impact on visibility in urban Shijiazhuang during spring

Random drift modeling for MEMS gyroscope based on lifting wavelet and wavelet neural network

Design of embedded video capture system based on ARM9

A portable gait acceleration acquisition system

Design and analysis of indentation tester with nanometer accuracy

Binaural localization simulation of a imitation bat for the ultrasonic detection

A novel wavelength calibration method for Fiber Bragg Grating sensor system

Optimal sensor placement and parameter identification model test of flood discharge structure under flow excitation

A method of extending the lower measured value of ultrasonic Doppler Flowmeter

New neon's electronic transformer with high leakage reactance design

A fast Triangular mesh generation Method and its engineering application

Experimental research of Averaging Pitot Tube flow sensors with Flow Conditioning Wing

Self-organization strategy for hybrid agent-based intelligent network

Discussion on the teaching method to Visual Basic Programming

Decision tree SVM basing on kernel clustering

A new perspective for reliability of the civil aviation network - Complex networks

Soft-switching technique used for restraining special vehicle's EMI

A linear algorithm based on TDOA technique for UWB localization

Design and optimization of supporting structure for scanning mirror in aviation remote sensor

Research on anti-adsorption control in hybrid maglev system with permanents and electromagnets

Performance of a combined anaerobic reactor for mustard tuber wastewater treatment

Optimization of task allocation and knowledge workers scheduling based-on particle swarm optimization

Notice of RetractionDesign and realization of embedded field geology multimedia data acquisition system based on Windows Mobile

A monolithic SiGe HBT low noise amplifier using a novel resistive feedback configuration

Design of test-control system based on MCU for variable speed hydraulic system

The current annealing in Co-based glass-covered amorphous microwires

Adaptive guidance for spacecrafts autonomous rendezvous with aspect constraint

Wireless sensor networks hierarchical routing algorithm based on node's energy balance

Automatic Testing System for airborne communication equipments

Dynamic simulation for crane to vibration control base on the computer information technology

Application of zero-phase digital filter in ultrasonic pressure measurement

Utilization of scale-space correlation on edge detection of image

Design of slope compensation circuit in peak-current controlled mode converters

Design of the self-organizing fuzzy PID controller based on chaos particle swarm algorithm

A new ubiquitous information agent system for cloud computing - Example on GPS and Bluetooth techniques in Google Android platform

Analytical calculation of air-gap magnetic field in permanent magnet motor with tile-form poles

A new sizing equation and it's application in electrical machine design

Application of DC/DC converter in hybrid power system of EV

Design of performance parameter automatic measurement system for intelligent motor soft starter

Control strategies study on armored vehicle hybrid electric drive braking system based on maximum energy feedback

Study on variable stiffness foundation treatment technology and settlement control

Design of trajectory control plan of three axes high speed linkage

Study on vector control system of asynchronous motor based on simplified three-level SVPWM

Research on recoil characters of self-propelled gun of chassis system effect on recoil part

Out-of plane displacement reconstruction of Carrier-wave Electronic Speckle Pattern Interferometry based on sub-pixel and Fourier transform

A new polymorphism testing method for C++ software

Information fusion algorithm based on fuzzy optimum

A Single-phase three-level PWM rectifier based on AC electronic load and space vector control

A new type of integer DCT transform radix and its rapid algorithm

Design of gas flow meter calibration based on sonic nozzles using negative pressure method

Research on the pulse-signal detection methods using the HHT methods

Notice of RetractionDesign and implement the communication middleware for Web virtual laboratory

Mic-value analyse and test design

The design of the embedded digital controller

Notice of RetractionDesign of fuzzy logic controller for coal mine drainage system

The research of algorithm for Electronic Seal System based on digital watermark Technology

Design and implementation of simple AC chopper with one PWM driving signal

The influence of subgrade with high modulus on the design of asphalt pavement structure

A 12-bit 800 MS/s D/A converter

A robust detection method of vehicle queue and dissipation during evening rush hour

An analysis on the plant landscaping of waterfront in Hangzhou

Stereo visual image matching in remote welding

Notice of RetractionDesign of sensor modules of active & intelligent energy-saving system

Notice of RetractionImplementation of sliding mode variable structure control for Induction heating power supply based on DSP builder

Analysis of HRVs of normal human and patients based on Kolmogorov Complexity

Research of large-scale directed assembly of carbon nanotube film

The hole-filling method for view synthesis in free viewpoint television (FTV) and 3D video

Using ground penetrating radar time-frequency analysis methods to recognise thin-layer

Autonomous Unmanned Surface Vehicle a microcontroller based approach

Communication component design in CMM software R&D based on I++ specification

Comparison analysis for validating methods of system simulation models

Desulfurization real-time monitoring system of coal-fired power plants in Guangxi

Design of combustible gas detector based on STC12C5410AD

Application of tabu-algorithm-based possibility prediction in edge finding

Design of channel coding in digital video broadcasting system based on FPGA

The research of share ajust algorithm in simulation scenario's collaborative editing

The design and realization of Real-Time monitoring system software

Analysis on the thermal environment of the supporting room of sports stadium with air-conditioning system in winter

Research on the integration architecture of OLAM and OLAP

Synthesis and photoluminescence of pinaster-leaf-shaped ZnO nano-structures

Study of land subsidence due to ground water extraction considering recharge

Calculation and analysis of stator fluid field and heat transfer of high speed PM machine

Performance tests research of residential central air-conditioning

Notice of RetractionDesign and implementation of random current source based on analog output card

Macro-impacts of oil shocks and fiscal policies: Study on a General Equilibrium model with financial sector and real sector

The effect of appartus model on Very Fast Transient Over-voltage

Design of several OPC servers communication system

Finite element simulation on excavating process of surge tank in Miaolin hydropower station

Fluorescence optical fiber measurement system based on an advanced Neural Network (NN) ensemble algorithm

Study on dominant work-states in 27-Point Controller

Design of a NEMS based LC oscillation circuit for tiny vibration determination

Research of hull structure collaborative design based on web service

Golden-section peak search in fractional Fourier domain

A simulation system for training telerobotic spine surgery

Adaptive fuzzy controller for track-keeping in autopilot simulator system

Using mathematical modeling to rationally arrange hospital beds

Electromagnetic coupling analysis of permanent magnet dual mechanical ports machine

Application of PCR-DGGE to analysis the microbial community structure in nightsoil sludge anaerobic digestion system aggrandized by HBH-II and alkaline pretreatment

Fuzzy controller with increment output mode for SCM system

Research on reducing residual vibration of trajectory glue based on pulse reshape filter

Simulation system design of a UAV helicopter

Approximate expression of fundamental frequencies of large-span suspension bridges

Exemplary monitoring system of space (ionosphere) weather based on GNSS

Traffic overflowing based channel allocation scheme for heterogeneous wireless networks

Study on process parameter of high performance laser cutting machine tool for copper sheet

Probability algorithm of digital watermark's relationship and analysis

Non-fragile H∞ control for a class of discrete Markovian Jump linear systems with time delay

A Federated particle filtering algorithm based on EKPF

Design for HI-bright LED driver power supply

The PSpice simulation and analysis of weak signal detection circuit based on stochastic resonance in Duffing system

Notice of RetractionStudy on the instant measuring technology for the intake flow of thermocouple vehicle engines

Loss differentiation algorithms in heterogeneous networks

Prediction of carbon flux based on wavelet networks

Design of a low-power Programmable Gain Amplifier for analog front end applications

Optimal LQG control based on the prediction for a robot system over wireless network

Purchase cost model and optimization of distributed generators

Research and development of Geodetic Space Management Information System of Unstratified Orebody

A Si2Sb2Te5 phase change memory featuring 27F2 cell size and ultra low writing current

Study of the magnetic properties in GaN with Mn-doping

Performance comparison of new endpoint detection method in noise environments

Analysis of frequency hopping signal acquisition using frequency estimation

Design and realization of photoelectric theodolite remote control system based on network

Study on tender evaluation method for engineering projects based on integration of DEA and fuzzy comprehensive judgment

A multilevel gamut extension method for Wide Gamut Displays

Using neural network realize the identification of nonlinear system

The borehole-ground controlled source electromagnetic signal transmitter

Study on collecting and transmission system of point-planar landslide disaster information

Comparative study of C-V active contour model and subdivision for micro algae image segmentation

Development of MP3 player with gesture control based on MMA7260 accelerometer

Synchronous control strategy for electric vehicle based on no clutch shifting

Analysis of generalized vacancy waste in water supply system and design of energy-saving

Defects detection of composite material using laser shearography

A new edge enhancement on halftone image

Analyzing spatial structure characteristics of the port system in Liaoning Province

Face recognition using Bidirectional Principal Component Analysis and wavelet transform

Design of spots intelligent monitoring system of digital scenic

The application of DC motor controller in the test system of intelligent elevator

The testing system design of safety belts' locking performance

Model predictive control design for supercavitating vehicles with control efforts restriction

An optical fiber gas sensor based on harmonic detection

Notice of RetractionThe technology of adaptive detection of life signals based on RBF neural network

Noise elimination from measured vibration response signals

The research of embedded database of mass storage technology

The design of intertranslation dictionary software of online access and desktop access

The solid tire sulphation control system based on PLC and Fuzzy adaptive PID control algorithm

The legal issues of commercial technology application in Cyberspace — Focusing on the infrastructure for allocation of risk in electronic payment

A study on the controller of solar heating system

Identification of Hammerstein models with general disturbances

Simulation of MPPT control algorithm for photovoltaic cell based on Matlab

Modeling and experimental modal analysis of active truss structure

Development and application of fertilization information systems based on ArcEngine

Design of CORDIC IP Compiler

Some thinking of the intelligent processing and controlling technology in metal semi-solid forming

The detecting of liner detector imaging system based on cat's eye effect

Single sink node placement strategy in wireless sensor networks

Evaluation of precise point positioning algorithm based on original dual-frequency GPS code and carrier-phase observations

An in-depth modeling and analysis of pressure-compensated flow control valve

Real-time thermal error compensation on machine tools using improved BP neural network

The research of high-speed tunnel cavity image processing system

Notice of RetractionFuzzy decision-making problems in the application of investment

Research on motion characteristic of omnidirectional device based on Mecanum wheel

The Smith normal form and controllability of liner systems over F(z)

Design of 1.2GHz bandwidth digital-correlator in fully polarimetric microwave radiometer

The gas water heater control system design based on fuzzy control

A digital calibration algorithm for pipelined ADC

A new CMOS electronically tunable current conveyor based on programmable current amplifier

Extraction and recognition of insulator based on aerial image

A model-based automatic control algorithm for a laser anneal processing system

Notice of RetractionDesign of MP3 player based on C51 MCU

Risk analysis of chemical industry park based on the maximum credible accident

Study on simulation and experiment of hydraulic excavator's work device based on simulation X

An intelligent weapon selection method for aircraft weapon control system

An artifical physics-based 3D swarm control strategy

Design and implementation of a mini-size search robot

Control system design of a case packing robot based on Simotion

High performance universal test system for pressure vessel sealing property

Static characteristic analysis and control technique of a new permanent magnetic operating mechanism

Influence of Metal Rubber Ring on the dynamics of the Active Magnetic Bearing system for optimal performance

Processing and fusion of meta-search engine retrieval results

The design and implementation of a teacher-student interaction system based on ZigBee and RFID

Development of micro-electric machines driven by liquid crystalline backflow

Performance of retrieving the clipped OFDM signals

Characterization of submicrometer thickness of copper film on silicon wafer by using pulsed eddy current method

High step-up converter based on two charge pumps with one inductor inserted

Real-time measurement of communication subsystem of intelligent electronic devices

An implementation method of Canny edge detection algorithm on FPGA

The design of improved adaptive variable universe traffic fuzzy controller

Free vibration analysis of circular cylindrical shells using transfer matrix method

Study and design of logistic distribution information system of urban household appliance based on GIS

3D model generation of complex objects from multiple range images

Sliding mode control for a near space autonomous airship

Design of low-power micro fingerprint lock based on STM32F103ZE

Design of enterprise production and sales measures information system based on WEB

The study of excitation methods in experimental modal analysis of lightly damped structures

Application of intelligent algorithm in the cement rotary kiln

Modbus communication used in the machine of spark plug

Application of binary particle swarm optimization in feature selection for transient stability assessment

Notice of RetractionStudy on the Electronic-Hydraulic compound Anti-lock Braking System for Four In-Wheel-Motor driving vehicle

Function L of fault-tolerant interval intersection

Disparity estimation based 3-D video object segmentation

The study of robot actuator control based on fuzzy algorithm

New algorithms for second order model reduction based on Krylov projections

AND logic gate for optical processing

Optimal extraction of exhaustible resources with stochastic price

Management information systems and optimizing the state-owned enterprise top manager teams

The design of sensor to accurately measure the atmospheric refractivity online

Wavelet packet transform in optical fiber gas sensor system of signal denoising

Monte Caro method for interlocking capacity calculation

The vehicle-borne electronic image stabilization system based on Gray Projection Algorithm

Study on uncertain decision factors of logistics distribution using Mason theory

Research on testing method for 1553B cable of vehicle integrated electronic systems

A coverage hole detection method and improvement scheme in WSNs

An efficient method to compute Arithmetic Transforms for datapath by module compositions

Research on fuzzy controller for photovoltaic power system

Research on tower crane automatic tracking and zooming video monitoring system based on Improved Camshift algorithm

Thematic information extraction of constructed wetland ecological GIS in mining subsidence area

Research of the influence of combustion chamber structure on performance of dual fuel engine

High-speed parallel wavelet algorithm based on CUDA and its application in three-dimensional surface texture analysis

A method of real-time edge detection

Reusable Software Framework for Electronic Power Load Management Based on Components

Pheromone-based ant colony clustering algorithm in multi-agent cooperation

Control law development for a four wheel direct drive EV

The method of multi-sensor time registration

HIRFL-CSR time-sharing control system

Image copy-move forgery detection based on “crossing shadow” division

Electromagnetic waves multi-path model based on image approach in tunnels

A Fast Surface Temperature Signal Generator

Sleep apnea syndrome recognition using the GreyART network

Research on nonlinear adaptive inverse control using FLANN data-together constructed by LS-SVM

Research on causes of harmonic currents and solitating problem

Perceptual quality measure using JND model of the human visual system

Robust input shaping for anti-sway control of aerial working platform of folding arm mode

Research on general on-line detection of optic-axis parallelism for vehicle observation and aiming systems based on original position

A new route-choice probability method for traffic assignment

Study on microscopic mechanism of nematic LCD using quantum theory

Research on passing values between ASP.NET Web Forms

Load classify of raking machine in subsider based on EMD

Hierarchy control approach for hydraulic press machine

Design and experimental analysis on characteristic of the magnetostrictive turning process tool-post

Design of compact and simple three-frequency transformer with two-section

Notice of RetractionResearch of manual climate control system based on SCM

The design of 14GHz temperature-compensated 20Watt power amplifier module

PGK algorithm in hyperspectral image compression

Discussing the application of HMI in the VVVF system

Modeling of temperature distribution in mass concrete structure and proposal of method for identification of thermodynamic parameters

A ultrawideband 3–10 GHz low-noise amplifier MMIC using inductive-series peaking technique

Research of Reynolds stress model in the aerodynamics of damping rings aircraft

Study on microwave high power automatic test system and its error correction and uncertainty analysis

Increasing biogas production of anaerobic fermentation with cellulase pretreatment on organic fraction of municipal solid waste

The forecast of the electrical energy generated by photovoltaic systems using neural network method

A controlling method for realizing chaotic synchronization and generating a special multi-wing attractor

PROTEUS-based simulation platform to study the photovoltaic cell model under partially shaded conditions

Nonlinear equations of the Newton iteration

Feature points based image registration between endoscope image and the CT image

The design and implementation of Magnetic Resonance Sounding system for shallow groundwater exploration

The effect of roll-off factor on modulation classifier

An improved rotor position and velocity estimation technique for PMSM based on modified machine model

Nonlinear internal model control with inverse model based on extreme learning machine

Configuration development of robot controller with UML

SDRE and series approximations model predictive control for a parafoil system

The optimal control model of valley pollution and solving method

Analysis of V-Crack magnetic flux leakage characteristics based on magnetic charge

Fuzzy control strategies for automotive automatic air conditioning

Electric eddy current pick-up of turbine flow sensor and CPLD nonlinearity correction

An arc tangent interpolation algorithm applying in CNC cutting machine

Low power design of public key algorithm ASIC'S cell library

Double snapback effect in LDMOS based on non-isothermal simulation

OFDM blind signal detection based on the probability-enhanced genetic algorithm

Analysis and design of CIC compensation filter

Digital SPWM inverter design and implementation

An image block compression method with high fidelity based on AWG algorithm

Exploring college continuing education on management model

Visible and Near infrared reflectance spectroscopy for determining soluble solids content of navel orange

The conserved quantity for system with random disturbances

Negative substrate bias effects on collector resistance in SiGe HBTs on thin film SOI

Estimating the range of marine radar with vertical atmospheric refractivity profiles from ground-based GPS

Laboratory appraisal and investigation of a novel polymer

Study on message optimization scheduling scheme of wireless networked control systems

Extraction of bubble shape parameters in two-phase flow based on digital image processing

Predictions for monthly tripping quantity of circuit breaker in electric distribution network based on weighted Markov chain

SAT for heterogeneous FPGA technology mapping

The evaluation model of the validity of security system in e-government

Intelligent storage controller systems based on ARM

Study on improve affection and countermeasurements of harmonics on watthour meter

Notice of RetractionProcess simulation study of gas transmission station in southwest of sichuan

Study of the constant speed control of motor for insulin pump based on optical encoder

Fault diagnosis based on integrated neural network and D-S evidential reasoning

Main components of harmonic solutions of nonlinear oscillations

Research on dynamic characteristics of the assembled beams

Research on water-saving irrigation automatic control system based on internet of things

Study of the distribution optimization with the multiple objective program

Launcher servo-system model identified by an improved GA-BP NN

Inductor optimize design for BCM BUCK-PFC in LED driver

Step tracking algorithm based on finite difference stochastic approximation for SATCOM on-the-move

Research on control strategy of mild parallel hybrid electric vehicle

Biosorption of methylene blue by the buckwheat hull—kinetics and optimization of adsorption parameters using response surface methodology

The Hardware Design of the intelligent detection and auto-control device for water-content in material pulp

A real-time position and posture measurement device for painting robot

Research status and development of interfaes for digital hybrid simulation

Collector depletion region investigation of SOI SiGe HBTs

Design of logarithmic current amplifier for micro-PCR EC detection

Overseas listing and performance of private enterprises -Evidence from private enterprises listed in Hong Kong

Design and application of model free controller

Tracking error detection method for novel multi-level discs

Overview of approaches for accelerating scale invariant feature detection algorithm

Growth characteristics of carbon nanotubes by DC-PCVD

The application of WinSRFR software in the modern system of drought-enduring crop surface irrigation design and water quality evaluation

An algorithm of data fusion using neural network

An stability measurement instrument with high precision and great measurement range quality

Improve light vehicle diesel engine emission and fuel consumption through optimize injection parameter

Spectrum underlay-based water-filling algorithm in cognitive radio networks

Design of weighing transmitter in corn yield measurement system

Research of routing optimization based on improved PSO algorithm in power communication network

Study on programmable adjustable inductor application simulation in PWM Rectifier

Node method in steady-state calculation of urban pipeline

A FFT based long-code acquisition algorithm suitable for FPGA implementation

Design of the multi-motor synchronous control system based on CAN Bus

The Measurement of soil moisture and density research and application design using the principle of dual-energy ε-rays transmission

Design and realization of grating target coordinate sensors

Fiber bragg grating technology used in temperature online monitoring for GIS bus contact

Health status evaluation of power driveline based on D-S evidential theory

Optimal simulation and design of LED array for revolving curing

Research and simulate of the optimization anti-collision technology in UHF RFID system

Mico-displacement measurment and analysis of one antenna box structure based on temperature compensation

Design of detecting metal signal weak change detection circuit

New compensating method for switch sensor based on predictive model in railway maintenance and monitoring system

The relationship and structure among safety factors of Petrochemical Dock system

Design of a Li-Ion battery charger with CC-CV-CT regualtion loop

Simple modeling of DC-DC converter

The solution of hybrid electric vehicle information system by modbus protocol

Study of the control method of actively changing flexural rigidity of flexible manipulator arm

Adaptive sliding mode observer-based fault diagnosis for flight control system

The control of pressure level in boiler based on double fuzzy controller

The study and application of the technology of data warehouse and data mining in the library

Research on model reference sliding mode control in roll stabilization of aerocraft

Speed control of induction motor using neural network sliding mode controller

A fiber—Optic differential pressure sensor based on microchannels fabricated laser

The study and application of steel enterprise energy management system

An EPC circuit reducing high voltage storage capacitance in pulse TWTA

Ocean red tide temperature and salinity monitoring technology based on Brillouin scattering

Force feedback predictive control based on BP neural network of MIS robot

Electrical current measurement based on Joule heating of micro-resistors

Analysis on resonant characteristic for TE0 mode of complicated microwave cavity in rubidium standard

The architecture of Tender and Bidding System of enterprises based on Hadoop Cloud Platform

Multi-kernel PCA based high-dimensional images feature reduction

Notice of RetractionThe neural network method of parameter recognition for transient well test

A texture-based method for autonomous star identification

Automatic profiled fiber identification based on a sequential clustering algorithm

An improved genetic algorithm for the cellular manufacturing system planning

Magnetic field evaluation of side-by-side packed ultra thickness linear actuators

Simulation study of variable step-size LMS algorithm in frequency domain for de-noising from MRS signal

Identification of a hybrid maglev system with electromagnets and permanent magnets

System state estimation in health assessment of gearbox

Attitude tracking of rigid spacecraft without angular velocity measurements via passivity approach

Nonlinear feedback synchronization control of a new four-dimensional hyperchaotic Chen system with disturbances

A new method to optimize function verification

Notice of RetractionResearch of anti-resonance control based on moving load on bridge

GM(1, 1) model improved by artificial fish-swarm algorithm

Design of an over-sampling digital filter for high-resolution Σ-ΔDAC

Remote monitoring and control of photovoltaic system using wireless sensor network

Notice of RetractionThe study and design of DC—AC converter in the Urban roadside billboards

Study on treatment of wastewater from the production of PolyTHF with adsorption method

Research on heat-solid coupled numerical simulation of engine exhaust pipe based on ANSYS

The model of electromotive force-impedance estimating the SOC of battery online

Fault diagnosis of electro-hydraulic servo valve based on neural network

Notice of RetractionStudy of intersection control under saturated traffic flow based video detection

Three-dimensional numerical simulation of the combustion chamber of glass furnace

Bulk modulus measurement of hydraulic oil based on drop-hammer calibration device

Combined hysteresis current-controlled PWM inverter and robust control for a permanent-magnet synchronous motor

Design of large space fire alarm controller based on intelligent video surveillance

The research and design of the flexible production line control system

A neural network application in predicting slope stability

The probability prototype in Hash function collision tests and standardization of the test

The system research based on JOGL three-dimensional coal quality forecast

Affections of different NO sources on engine emitted nitrous oxide

Using culd3d design virtual experiment of Camera operation

The feedback technology for gain flatness and stability of UWB LNA

Study of optical fiber probe roughness measuring method on aerial metal materials

Recursive identification of Wiener systems with nonlinearities

A wavelet-Galerkin method for the simulation of torsion MEMS devices under the effect of squeeze film damping

Target identification based on the simulation of infrared thermal image

Container cranes seismic load calculation criteria based on structural dynamics

A variational inequality model for dynamic route choice and algorithm

Novel CMOS ternary flip-flops using double pass-transistor logic

The design of on-site calibrator for integrated error of low-voltage measurement device

Application of particulate reinforced aluminum matrix composite in airborne photoelectric turret

The design of fault diagnosis system of 120-type freight train brake

Study on treatment of wastewater from the production of PolyTHF with Fenton method

C/A code of GPS software receiver fast acquisition based on FPGA

Research on methods of harmonic detection based on second generation wavelet algorithm

Design and realization of cone beam CT 3D image reconstruction based on FPGA

Content Provider	IEEE Xplore Digital Library
Author	Chenxin Ma Hua Jiang Bin Yan Lei Li
Copyright Year	2011
Description	Author affiliation: Department of Electronic Science, PLA Information Engineering University, Zhengzhou China (Chenxin Ma; Hua Jiang; Bin Yan; Lei Li)
Abstract	FDK is the most popular algorithm used to reconstruct 3D image in cone beam CT system. To speed up the calculation, the paper analyses the properties of FDK, and realizes the backprojection part of the arithmetic on FPGA utilizing virtex5 lx110. The paper designs an eight parallel paths system which can processes eight paths dataflow simultaneously. The experiment result shows that the backproject calculation can be speeded up remarkably. The system can run 252 times faster than software do.
Starting Page	3139
Ending Page	3142
File Size	359638
Page Count	4
File Format	PDF
ISBN	9781424480364
e-ISBN	9781424480395
DOI	10.1109/ICEICE.2011.5777827
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2011-04-15
Publisher Place	China
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Particle beams FPGA Image Reconstruction Parallel FDK Image reconstruction Pipeline Computed tomography Three dimensional displays Acceleration Cone Beam CT Field programmable gate arrays Biomedical imaging
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in