NDLI: Characteristics of p-i-n power diodes for power electronics operated at cryogenic temperatures

Please wait, while we are loading the content...

IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002.

2002 37th Intersociety Energy Conversion Engineering Conference (IECEC) (IEEE Cat. No.02CH37298)

Analysis of a capacitor-based hybrid source used for pulsed load applications

Conceptual design of high power advanced low mass (HPALM) solar thermionic power system

Advanced electrostatically clean solar array panel design using reflective aperture grids

Simulation of energy sharing among flywheels in parallel configuration

A systems model for power technology assessment

A comparative guide to the main steady-state characteristics of four-element current-source resonant converters

Modeling nonlinear loads for aerospace power systems

Electrical performance of the international space station US photovoltaic array during bifacial illumination

Validation of international space station electrical performance model via on-orbit telemetry

International space station (ISS) truss orbital replaceable unit (ORU) overvoltage transient resolution

Efficient design in a DC to DC converter unit

Energy conversion issues for airborne directed energy weapons

Integration of high energy laser weapons systems aboard all-electric ships

Lightweight, compact superconducting power sources for solid state high energy lasers

MHD power for directed and kinetic energy payloads on hypersonic vehicles

Implementation of magnetohydrodynamic energy bypass process for hypersonic vehicles

2001 Mars Odyssey electrical power subsystem architecture and flight performance

The CONTOUR spacecraft power subsystem

Lessons learned: Solutions to..... "a good idea at the time"

The GOCE electrical power system

International space station electrical power system performance and operational lessons learned

Battery reinitialization on the photovoltaic module of the international space station

Comparison of ISS power system telemetry with analytically derived data for shadowed cases

International space station nickel-hydrogen battery on-orbit performance

Power technology options for nuclear electric propulsion

Microwave power for smart membrane actuators

Electric utility interface issues for power beamed from space

Applicability of aircraft Brayton power technologies to future space power conversion systems

Stirling radioisotope generator for Mars surface and deep space missions

Integrated energy-momentum wheels for spacecraft

Commercialization of flywheel energy storage technology on the international space station

A MICRO high-temperature superconductor-magnet flywheels with dual function of energy storage and attitude control

Advanced flywheel technology for space applications

COMET Flywheel System/spl trade/ demonstration

Flywheel magnetic suspension developments

Control topology for the COMET flywheel system/spl trade/

Motor/generator controller design for the COMET flywheel

GlennNASA/Goddard Space Flight Center (GSFC) Integrated Mission Design Center (IMDC)

An integrated magnetic circuit model and finite element model approach to magnetic bearing design

Processes and materials for flexible PV arrays

Thin-film organic-based solar cells for space power

Multijunction thin-film solar cells on flexible substrates for space power

Chemical vapor deposition for ultralightweight thin-film solar arrays

SMEX-Lite modular solar array architecture

Redesign of Glenn research center D1 flywheel module

Single axis attitude control and DC bus regulation with two flywheels

Bidirectional magnetic bearing with fault-tolerant capability

An integrated magnetic circuit model and finite element model approach to magnetic bearing design

Estimator based controller for high speed flywheel magnetic bearing system

The evaluation and implementation of a water containment system to support aerospace flywheel testing

Fuzzy controller based for photovoltaic maximum power tracking

High-reliability space power converters: design and analysis issues

Performance of high-frequency high-flux magnetic cores at cryogenic temperatures

Microcontroller implementation of current-mode control for a discontinuous mode boost converter

A criterion for the development of fires in multiroom structures

Room flashover and subsequent filling of the structure with smoke

Role of combustion air swirl distribution in a burner on secondary atomization of droplets

NiH/sub 2/ reliability impact upon Hubble Space Telescope battery replacement

Understanding and managing capacity walkdown in nickel-hydrogen cells and batteries

Effective resistive drain design considerations for Ni-H/sub 2/ batteries and related battery support equipment

Hubble Space Telescope on-orbit NiH/sub 2/ battery capacity performance (1990 to 2002)

Solid state batteries using thin film technology

Lithium-ion cell technology demonstration for future NASA applications

High-temperature switching and evaluation of 4H-SiC gate turn-off thyristors and diodes under inductive loads

Magnetic and electrical characteristics of Supermalloy thin tape toroidal cores

Using a Cuk converter to interface a pulsed load to a fuel cell

A novel fuzzy PD plus repetitive control scheme for inverters

The stretched lens array (SLA): a low-risk cost-effective concentrator array offering wing-level performance of 180 W/kg and 300 W/m/sup 2/ at 300 VDC

A deep-space concentrator for inner and outer solar system missions

Optical performance of thin film, inflatable, solar concentrators for illuminating PV arrays

Ultra high-efficiency advanced triple-junction (ATJ) solar cell production at Emcore photovoltaics

The ultra triple-junction cell: high-efficiency solar cell for space applications

Nanotechnology - enabler of next generation energy storage?

Critical heat flux of multinozzle spray cooling in a closed loop

Exergetic analysis of a turbojet engine in off design conditions

Experimental study on R-22 condensation heat transfer characteristics in plate and shell heat exchanger

Method of generating orbital transient equivalent sink temperatures and thermal vacuum test target temperatures for swift instruments

Technique of generating equivalent sink temperatures

SWIFT burst alert telescope loop heat pipe thermal system characteristics and flight operation procedure

AZW-LA-II white paint on swift BAT and XRT radiators: first time this paint is flown on an operational spacecraft

Swirl effects on global and chemical behavior of flames

Role of combustion air swirl distribution in a burner on secondary atomization of droplets

Jet fuel droplet combustion with and without the convection

Profiling of elemental composition in a methane-air premixed flame by laser-induced plasma spectroscopy (LIPS)

An experimental study of combustion reinforcement in freeboard of fluidized bed waste incinerator

Determination of the NO/sub x/ emission reduction potential of an aerodynamically valved pulse combustor

Thermal designing on a small-sized AMTEC cell

Design options for a liquid metal reactor coupled with an AMTEC unit

Analysis of compressed air regenerative braking and a thermally enhanced option

A numerical investigation of combustion parameters in various industrial furnaces

CFD prediction of cold airflow field for multiair channel pulverized coal burner in rotary kiln

A numerical study of the structure of methane-hydrogen blended fuel turbulent jet flames

A numerical investigation on flow through 2-D and 3-D coaxial nozzle burners

Numerical study of aerodynamic interaction of compressor and combustor flows

Energy conversion mechanics and power evaluation of compressible fluid in pneumatic actuator systems

Thermodynamic analysis of combined system with twostep reaction-comparison among them

Flow induced acoustical resonance in exhaust gas economizer tube arrays

Thermodynamic analysis of an enhanced gas and steam cycle

Capturing the energy of ocean waves

Preliminary computational studies of flash boiling for fuel injectors in gasoline direct injection automotive engines

CFD applied to heat pump system design

Numerical analysis of heat transfer from heating coils

Numerical modelling of the MHD interaction in hypersonic flows

Impacts of radiation heat transfer on NO/sub x/ calculation in industrial furnaces

Performance of new matrix for Stirling engine regenerator

SNAP 2002-a Stirling numerical analysis program a second generation program

Oscillatory flow and thermal field measurements at the interface between a heat exchanger and a regenerator of a Stirling engine

A 2-D CFD model of oscillatory flow with jets impinging on a random wire regenerator matrix

Discrete dynamical system models of turbulence-chemical kinetics interactions

A numerical study of multicomponent vaporization effects in FCC riser reactors

Performance analysis of axial fans in unitary air-conditioning systems

A numerical solution for the flow in a microchannel by lattice-Boltzmann method

Measurements in oscillatory flows with separation in support of Stirling engine model development

A 2-D axisymmetric CFD model of oscillatory flow with separation

Dish/Stirling hybrid-heat-pipe-receiver design and test results

Results from the advanced thermionic technology program

A summary of the National Research Council's report on thermionics

A possible test procedure for thermionic fuel elements

Photothermal deflection spectroscopy measurements of an anisotropic superlattice

Systems-level optimization of low-temperature thermoelectric waste heat recovery

Using of electronic processes at oxidation-reduction reactions on surface of semiconductor catalysts for electric energy generation

Optimal characteristics of fuel cell generating systems for utility distribution networks

Key requirements of micro fuel cell system for portable electronics

Fuel cell thermal management with thermoelectric coolers

Enhancing hydrogen production for fuel cell vehicles by superposition of acoustic fields on the reformer: a preliminary study

Harmonic cancellation for HVDC using a novel control scheme

Harmonic detection method for HVDC DC-side active power filter

A novel DC/AC boost inverter

Analysis and simulation of same cycle transient control (SCTC) for application in voltage regulator modules (VRM)

Granulation of molten slag for heat recovery

Enhanced performance of laminated PCM wallboard for thermal energy storage in buildings

Alternative energy conservation technologies in industrial freezers operating under frosting conditions

A study on solar hydrogen generation with PEM

Equilibrium moisture content and latent heat of vaporization of grapes

Regenerative gasification systems operating on farm-waste and bioenergy-crop feedstocks

The determination of minimum levels of hydrogen supplementation to produce acceptable cold start performance of engines using a high-blend ethanol fuel

Redefining and analysis of hydrogen from a fuel to a highly refined energy storage and transfer medium

Influence of operating temperature on efficiency of supercooled thermal energy storage

UPS outage-mode output power capacity expansion approach via bidirectional converter

A low cost resonant snubber inverter for uninterruptible power supply application

The application of posicast control to DC-DC converters

Characteristics of p-i-n power diodes for power electronics operated at cryogenic temperatures

A study on the solar thermal cell-the influence of proton conductivity in a polymer electrolyte membrane and electrical conductivity on the output of solar thermal cell

Long-term performance of photovoltaic modules at different tilt angles and orientations

Distributed generation and renewable energy systems

Proposed solar Rankine cycle system with phase change steam accumulator and CPC solar collector

Model to predict performance of all electric transportation with wireless power beams

Electric bicycle transportation system

Weight reduction analysis of an ambulance structure

Engine emissions modeling for a hybrid electric vehicle

Energy recovery by evaporative cooling in several plants of the iron and steel industry

Thermodynamic analysis of heat transformers employing thermal sources and sinks of finite capacity

Energy efficient air conditioning systems in hospitals operating theatres

Energy efficiency in operating theatres: a case study

Numerical study of mixed-convective cooling of a rectangular cavity with differentially heated side walls

Cooling power enhancement for 2-D and 3-D CPC sky radiators

The end of petroleum

Energy sources for the world's post-petroleum era

Lessons learned from California's experience on electric power deregulation

Evaluation of Iranian strategy for energy use in the next decade

Analysis of options for increasing pipeline capacity

The nuclear waste problem and reconsideration of the ocean disposal option

Development of the dedicated numerical platform feasible to very long-term climatic simulations based on the time-space method

Offset global warming with the Earth Cooler/spl trade/

Collection of Technical Papers. 35th Intersociety Energy Conversion Engineering Conference and Exhibit (IECEC) (Cat. No.00CH37022)

IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203)

IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference

Proceedings of the 25th Intersociety Energy Conversion Engineering Conference

Proceedings of the 24th Intersociety Energy Conversion Engineering Conference

Characteristics of p-i-n power diodes for power electronics operated at cryogenic temperatures

Content Provider	IEEE Xplore Digital Library
Author	Prasertsit, A. Jackson, W.D.
Copyright Year	2002
Description	Author affiliation: Dept. of Electr. Eng., Prince of Songkla Univ., Thailand (Prasertsit, A.)
Abstract	The operation of switching power converters at cryogenic temperatures has received increasing attention as key a subsystem in the implementation of electrical generation, storage and transmission systems which are being developed to take advantage of favorable dielectric and electrical conductivity properties which occur at these temperatures. Systems which have been considered and/or are currently under development include hyperconducting and superconducting alternators, superconducting power transmission, superconducting magnetic energy storage and cryogenic capacitive direct electric energy storage. The advent of high temperature superconductors has increasingly focused attention on 77 K as the operating temperature but, for certain aerospace applications, around 150 K is considered to be optimum from an overall system viewpoint. All studies performed to date indicate that cryogenic switching power converters will utilize essentially the same topologies, modulation methods, filtering and controls found in ambient or elevated temperature versions. The critical need is for switching devices capable of ultra-low loss, high switching speed operation and it has already been established that majority carrier devices in the power MOSFET category operate successfully down to at least 20 K and that, for the higher temperature (150 K condition, other devices, such as IGBTs, can be utilized. On the other hand, the all-important power diode has received much less attention although its bi-polar character has to raise concerns about its ability to meet operating requirements, especially at 77 K and below. This paper reports the results of a study of p-i-n power diodes, including experimentally obtained static and dynamic characteristics at ambient, dry ice and liquid nitrogen temperatures. These are used to identify critical parameters and their range of values appropriate to successful power diode operation down to 77K. From these results, a preliminary approach to diode optimization is presented.
File Size	55177
File Format	PDF
ISBN	0780372964
DOI	10.1109/IECEC.2002.1392133
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2002-07-29
Publisher Place	USA
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	PIN photodiodes P-i-n diodes Power electronics Cryogenics High temperature superconductors Superconducting magnetic energy storage Switching converters Superconducting transmission lines Power generation Dielectrics
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in